Router to support lots of users

Our church's router currently is crashing every Sunday morning due to too many simultaneous connections. I was wanting to upgrade to one or more airport extremes and was just curious what the best way to do this was. I was thinking of bridging two together, but have never had experience doing so and if that would even allow for more than 50 connections.
Any help is appreciated!

old.IT.guy wrote:
(We are a non prof).
Thx!!
non prof.. should not mean non-professional.. just not for profit.
Ubiquiti is very reasonably priced.
It is a good balance between the expensive commercial systems like CIsco and HP.. and trying to press into service domestic gear which in the end will give you grief.
But I agree with Bob.. get a quote for this to be done for you by someone who knows.. even if you do the install yourself get people to come in .. plan it and set it up. The difference it makes is huge.
I presume everyone is following the sermon on their ipad nowadays.. LOL!!

Similar Messages

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

What is your WAN speed currently and projected WAN speed in the next 3 years?

Does Huawei router NE40 support Class-Based QoS?

As I know Class-based QoS defines traffic classifiers based on certain rules and associates traffic classifiers with certain traffic behaviors, forming certain traffic policies. After
these policies are applied to interfaces, class-based traffic policing, traffic shaping, congestion management, and precedence re-marking are implemented.
Does Huawei router NE40 support Class-Based QoS？

The NE80E/40E supports DiffServ and provides standard forwarding services such as EF and AF for users by using the following traffic management measures:
1 Traffic classification
2 Traffic policing
3 Traffic shaping
4 Congestion avoidance
QoS of the NE80E/40E supports traffic policy with the above measures and mapping between the QoS fields in the IP header and the MPLS header.
And more information about router NE40, please visit:
http://www.huanetwork.com/huawei-router-ne40e-series-price_c89

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

Why am I finding this when I run disk utility? ACL found but not expected on "Library/Application Support/Apple/ParentalControls/Users"

I am finding this when I run repair disk permissions in disk utility:
ACL found but not expected on “Library/Application Support/Apple/ParentalControls/Users”
Why is there an access control list on parental controls on my MacBook? I don't use parental controls and I am the only user of this MacBook. I'm an old guy too, so it's not my Mom putting controls on the MacBook! ;-)
Thanks!
MacBook Pro 9, 2
System Version: OS X 10.8.5 (12F45)
Kernel Version: Darwin 12.5.0
Boot Mode: Normal

From the article I posted a hyperlink to in my 1st post (at bottom): You can also usually ignore any "ACL found but not expected..." message. These messages can occur if you change permissions on a file or directory; they are accurate, but generally not a cause for concern.

A lot of users with white screen after lcd replacement!

Hello!
So i have a macbook air with a broken hinge.. replaced the screen assembly as in the guide on ifixit. All ok, but after replacement the screen is white with light vertical stripes. Now i have done some research and found out there are a lot of users with the exact same problem but none with a solution.
I think the reason why the screen turns white (most of the times) is because of the lcd modelnr en most importantly versionNr! The lcd model of the macbook air original is: B133EW03 but there are 4 versions of this screen: 0,1,2 and 3 respectively. In this link (page 3)http://www.ttsystem.ru/data/B133EW03_V1_Others_0204.pdf you see V1 is an upgrade of V0, in the way that the EDID codes have changes and so the OS has to send different codes to the lcd for it to 'understand'. I couldn't find the exact changes in V2 and V3 but i'm guessing it could be similar.
So my question is could this be possible?? is it possible or does anyone know you need the exact same lcd screen (model en version) when you replace your lcd screen?
Another very strange thing is that my macbook air shows some discrepancies:
The bottom case of my macbook air says A1304 and the serialNr off course. But the motherboard shows the A1237 model..Step 14! (In this ifixit guide http://www.ifixit.com/Guide/Installing-MacBook-Air-Models-A1237-and-A1304-Displa y-Assembly/855/1
Also OSX gives me the data:
MacbookAir 1,1
1,8ghz core 2 duo 64gb ssd (which isn't a a1304 model..)
but the same SerialNr!
When i check the specs online using the serialNr i can see it's made in week 50 of 2008.. in my opinion it's impossible it's a a1237, because apple introduced the a1304 in october 2008..

I had the same problem with the LCD after replacing hinges and could not figure this out.
To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery. I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........

Can I upgrade an E1200 router to support Mavericks?

I have a Mac and upgraded to Mavericks. Now when I go to Cisco Connect, I get a message that says "Unsupported Operating System The router software supports these operating systems: Mac OS X 10.5.8 or later, 10.6.1 or later, 10.7 or later" What seems odd is that my computer is still connected wirelessly but our Samsung Smart TV is not. Can my E1200 router be upgraded to 10.9? I also had a problem with my Canon scanner not scanning and by uninstalling and reinstalling the problem was fixed. Any chance uninstalling and reinstalling would work here?

You cannot upgrade but if you need to get into your Lynskys router account to change your settings, passwords and all other options. Use the 'Opera' Browser (If you don't have it, download it for free) The default IP address is 192.168.1.1. Paste it in your browser and enter. It will ask you for your username and password. You will be in, and able to do anything you were able to do with the old software.
Note. If you have OS X 10.9.1 Mavericks It will NOT work on Safari, Firefox, or Chrome.

EXP-00105: parameter CONSISTENT is not supported for this user

Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?

As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed.

Why doesn't elements 12 have 64 bit support for PC users?

Why doesn't elements 12 have 64 bit support for PC users? Most PC's these days are shipped with far more than 2GB of RAM. This move seems very limiting to those with high demands for RAM. Image sizes are only getting larger meaning more RAM needed for adjustments and editing. I have been putting off buying elements 11 waiting to see if 12 had 64 bit support and I am very disappointed to find it doesn't. I can't see myself buying 12 unless a 64 bit for PC is launched soon.

Update? It's a major release, ain't it?
Mac got the 64-bit. Why? From Pete Green's announcement:
A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
But, of course, Windows users have no such need...

Dynamic Routing Protocol Support in Cisco ASA Multiple Context Mode

                   Dear Experts,
Wold like to know whether dynamic Routing Protocol Support in Cisco ASA Firewall Multiple Context Mode. If yes then please provide OS version and Hardware Model of Cisco ASA Firewall. Appreciate the quick response. Thanks.

Hi,
Check out this document for the information
http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html#wp93116
Its lists the following for software level 9.0(1)
Multiple   Context Mode Features
Dynamic routing in Security   Contexts
EIGRP and OSPFv2 dynamic   routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing   are not supported.
Seems to me you would need some 9.x version to support the above mentioned Dynamic Routing Protocols.
I don't think its related to the hardware model of the ASA other than that it requires a model that supports Multiple Context Mode. To my understanding the only model that doesnt support that is ASA5505 of the whole ASA5500 and ASA5500-X series.
Hope this helps
- Jouni

If ESB routing rules supports XSLT2.0 ?

If routing rules supports XSLT2.0 ? Especially xsl:character-map.
Ja have problem with transform document with opaque schema to opaque schema changing characters ( sometimes one char to many chars ). If this possible?
Any other solutions?

Have you tried setting
"<xsl:stylesheet version="1.0" to "2.0" and manually edit the xsl to use the 2.0 functions?
Im not sure if this helps, i would give it a try.

WRT54GS "Router Not Supported".

Hello. I have a WRT54GS V.6. I have had it for quite a long time, but just yesterday it stopped giving internet to its wired connection. The wireless connection was working fine. I reset the router (holding the button in for thirty seconds and planned on making a new network). Everytime now it tells me: "Router Not Supported". I looked around the support here, and ended up downloading the firmware upgrade and upgraded the router, reset it once again, and tried once more. Same problem. "Router Not Supported". The power light is on. The WLAN light is on, the Ethernet Port 1 light is on, and the Internet light is blinking. So it IS recieving the signals. I don't understand what's wrong. I have no internet connectivity through the router, either.
Can someone help me?

Further browsing of the forums, and I came across this:
Step 1 : You should just connect the router to main wired computer from ( port 1,2,3,4). No need to connect the dsl modem in this step .
Step 2 : hard reset the router It seems that we will have to reset the device back to the factory defaults. Kindly follow these steps to reset the device:- - While the device is 'ON', press the reset button on the back panel of the device using a pointed object and keep it held for about 60 seconds. - You will notice that the power light on the device would start blinking, indicating that it is being reset. - After 60 seconds release the reset button and switch 'OFF' the Linksys device and wait for 10 seconds and then switch it 'ON' again. - Let the power light on the device stabilize.
Step 3 : wireless settings. Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin all in lower cases and then click on ok. Click on the Wireless tab - Here Wireless Network mode should be mixed - Provide any new name in the Wireless Network Name (SSID) box, all in lower cases without any spaces in between. Do not use any old name - Set wireless channel to 11 - And wireless SSID broadcast should be Enabled and then click on save settings.
Step 4 : wireless security
1. When the router's setup page appears, please click on the Wireless tab.
2. When the Wireless area appears, click on the Wireless Security sub tab.
3. When the Wireless Security area appears, select WEP under Security Mode dropdown.
4. Encryption should be set to 64 bits 10 hex digits.
5. Skip the Passphrase box.
6. In the WEP Key1 box, type in a phone number (just the numbers no spaces or dashes) that you can remember in the box.
7. Make a note of these 10 numbers; this would be your wireless network's key.
8. Leave the key 2, key 3 and key 4 boxes blank, and then click on the Save Settings button.
Step 5 : On the 192.168.1.1 set up page of the router , please click on the set up tab . In that you will find an option as local ip address 192.168.1.1 . Please change that to 10.10.10.1 and then hit save settings at the bottom. Once setting's are saved close that page.
Step 6 : confirmation of the physical connection. You should connected the modem router ( internet port ) to main wired computer ( port 1,2,3,4). Now switch OFF both your modem and the router. Switch ON the modem first and wait for about 40 seconds and only then switch on router. At the end of the step 6 try going online from the wired computer . If you are not able to go online from the wired computer than do the step 7
Step 7 : Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 10.10.10.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin all in lower cases and then click on ok. On the main setup page select the Internet Connection Type as PPPoE. - Then provide the username and password provided by your ISP (Internet service provider) for your connection. (Example: [email protected]) - For MTU select Manual from the drop down box and set the MTU size to 1250. - Select the Keep Alive option and choose the redial period as 30 sec
(Originally in BTB's post)
And it worked for me. :] So my problem is solved.

How to allocate automatic a group to a lot of user ?

Hello everyone!
I need help from someone......
I want to allocate a lot of user ( > 1500) automatic in a new portal-group. It´s mean when a new user register, it went automatically in this group.
Otherwise, when the user quit out of business, he leaves the group.
Many thanks from Germany!

To allocate a GROUP to lot of user you can follow the below mentioned steps:
1. Go to User Administration --> Import
2. Inside Import tab you will find the place where we can paste the code
     group
     gid=Group_Name
     user=User_Id1;User_Id2;
Just for information , if you want to get the format i.e. of the above mentioned 3 bold lines, you can take the following steps:
1. Go to User Administration --> Identity Management, inside that in Search Criteria, select the option
    to search for Group.
2. Now select the Group which you have got after search(in which you want to add users), and click on
    EXPORT button.
3. And now the screen appears which is having TextArea which will be having details on the Group.
Let us know if your issue is resolved.

Updated Firmware WRT54GS V7...Now Router "Not Supported"

Hello all. Just bought a new WRT54GS V7. Set up per instructions and it worked flawlessly. Detected both wireless rigs without a problem, and wired rigs worked. Decided (as I always do) to upgrade the firmware to the latest update. Got the latest .bin file for version 7, etc. Followed update instructions to the letter, including pressing the reset button for 30 seconds. Now, when trying to set up the network again, I get to the point of EasyLink trying to find the router, and I get the message "Router not supported. Easylink Advisor is designed to set up Linksys networking products.....". I re-downloaded the file in case of corruption...three times actually. Repeated the entire process with each. Still same problem. Now, I know that pretty much everything, including this router, says not to update the firmware or bios unless you are having a problem. No, I wasn't having a problem, and I guess for the first time I should have paid attention. Any suggestions/solutions? Thanks in advance.

Disable all firewall first on the computer ..... again download the .bin file from the website ....
Save it on your computer .... access routers setup page & try to upgrade the firmware again ..... make sure that you are picking up the correct file ....
After upgrade reset & reconfigure the router ....

WRT54GS v6 "router not supported"

My router has been working fine for months and now when I try and setup my home network it tells me "router not supported". I've tried the reset thing for 30 secs, power on, power off, hold my tongue right and still nothing. I'm about to throw it out the door.
Can anyone help me out with this please?

You need to re-configure your router...
If your Internet Service Providor is Cable click here
If your Internet Service Providor is DSL click here

Router to support lots of users

Similar Messages

Maybe you are looking for