Router will not retain settings

I have a WRT54G wireless router. I have a static IP address and when I enter it everything works but after saving settings and I come back the next day the settings have returned to an address that is automaticly assigned and the static IP are not there.
After reentering the Static IP everything works again and I have the same problem again.

its a clear indication tht your router needs an update for the firmware

Similar Messages

Firefox will not retain all saved settings on BBC Website

The BBC Home page will not retain all settings.
The local area page (weather and news) is fine, but each time I increment the number of news stories, both national and local to the maximum, it returns to the default when I restart Firefox. It worked fine on previous versions of FF.
I have deleted the cookie and restarted FF, and this worked, but it has now returned to the default. FF=4.0.1

Its not just the web site that is recorded, but the page also.
Did you open your history ( '''Control Shift H''' ) and search for the site ?

DHCP snap-in will not retain window settings, columns, etc.

DHCP (version 6.3) will not retain window settings or columns after being closed. I haven't been able to find any information on this so far. Has anyone else had this issue?

Hi,
I understand your issue. The DHCP management console won't save the view customize settings.
We could customize the DHCP management console using MMC (Microsoft Management console)snap-in, customize it and save it to a place. Doing this makes the console remembered the configuration.
More information regarding MMC, please take a look at the below link:
Microsoft Management Console 3.0
For the DHCP management console does not remember the customization, this might by design. If we want to make a customized DHCP console shortcut, we could take a try to enter DHCP in author mode, more detailed steps, please take a check with the post of
Josh in the below thread:
DHCPMGMT.MSC in Remote Server
Administration Tools (RSAT) won't remember DHCP server
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Since I upgraded to ISo6 my iPhone 4s will not retain Wifi passwords

Hello
I'm hope that someone can help as this problem is driving me NUTS.
Since I upgraded both my Iphone 4s and Ipad 3 to ISO6. I've had nothing but problems with Wi-Fi access, inititally neither machine would remember the home networks (or any others) then suddenly the IPad3 fixed itself but still my Iphone 4s will not retain the password.
It was always able without any problems to retain the passwords for any Wi-Fi networks before the upgrade - but no more.
I've tried pretty much everything that I read about from a reboot, resetting the wifi setting, resetting all settings, a factory reset and a restore - nothing helps! The iphone connects to the network no problem - but if you go out or if the phone locks and more than 30 minutes goes by - it'll have forgotten the networks and will require that you reenter the password. Which is getting more than annoying.
Given what I've tried I'm thinking that the software somehow got screwed up a little when it installed and I need to completely reinstall the ISO. I also noticed the personnel hotspot is missing!
Any help really appreciated as it's driving me crasy.
Richard.

I read someone said you can tap on "other" when selecting which wifi you connect to and then entering the exact wifi name of the network you wish to join and the password and then joining that network allowed the password to be saved. Also with iOS 6 the minimum length of the password needs to be 8 characters. Maybe you password on your router is less than 8 characters long

WRT54G Wireless Router Will Not Assign a Network Address

A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
I am a visitor at the work location with the connection problem, the router works for others without any issues.
Thanks

Well in such case .... you can try few settings on the wireless adapter ....
If you are using WLAN monitor .....
Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
At last point it shows .... all the configuration settings ...reconfirm that >> Click on connect ot a network & reboot the computer ...
After reboot see if it shows connected or not....
You can also use Static Ip in the configuration ....

IPhone will not retain wrt54g password

Hi all. I have a iphone that will not retain the password for a WRT54g. Each time I leave the house, I have to renter the wifi password on my phone. It remembers other networks, just not the house. I'm clueless on modems, so if you suggest that I do this or that,...... Dumb it down A LOT! Thanks!

You just need to ensure router’s firmware is updated. Reset the router and reconfigure. You can download firmware from this link http://homesupport.cisco.com/en-us/support/routers/WRT54G.

Safari v7.1.2 will not retain any customization

Safari v7.1.2 on Mavericks 10.9.5 will not retain any customization after quitting app and then re-opening. Anyone else having this problem? Any solutions?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
3. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
4. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click “Remove All Website Data”.
5. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.

InDesign CS6 will not retain preferences

One of my users was recently upgraded from CS5 to Design and Web Premium CS6. The first issue is that the InDesign program crashes for no apparent reason from time to time. Secondly, the InDesign program will not retain any preferences. If the program crashes and is restarted, the preferences are lost. Also, if the program is closed normally and reopened, the preferences are lost. This started happening about one month ago and prior to that, there were no problems.
I have searced the forums and internet for a solution and while I've been able to find similar issues with other users, I cannot find a resolution. Re-installaiton of the program has not produced a resolution. Can anyone assist with this frustrating problem.

I'm sorry Pete...I didn't quite get your response. Can you reboot into safe mode, disable all drivers, turn off your virus protection, uninstall the latest service pack and then reinstall it, check your fonts because bad fonts can cause problems in getting responses through.
Pete...I don't disrespect you. I DON'T EVEN KNOW YOU. I'm sure that your intentions are always legit and that you truly TRY to help people. My only issues are that I came her for help and would rather have a dozen people shrug their shoulders and say "IDUNNO" rather than getting the same old questions about drivers, service packs, virus protection, firewalls or first born male childs birthdate. While I may have been aggressive in looking for a solution....I did find your responses to be a bit patronizing and belittling. I do not disrespect you.
A different philosophy? ABSO-FREAKING-LOUTLEY!!! I'm more of a "fix the problem guy". Forget the amputation...put the poor ******* out of his misery and perform a Frankenstein ritual to bring him back to life (My analogy for a quick re-image from my deployment server). Fortunately for me, I was able to solve the issue by simply recreating a user profile.
Once again, thanks Pete for you response.

Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4

My 1760 router will not recognize a wic1-dsu-t1-v2 card in slots 3 or 4. They only work in slots 1 & 2. Never saw this before where the same card would not work in different slots.
Need assistance.
Thanks,
Ron
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 20-Jul-04 07:00 by kellythw
Image text-base: 0x80008120, data-base: 0x80C74650
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
Router uptime is 20 minutes
System returned to ROM by power-on
System image file is "flash:c1700-ipbase-mz.123-6c.bin"
cisco 1760 (MPC860P) processor (revision 0x500) with 55598K/9938K bytes of memory.
Processor board ID FOC0849230K (3846615071), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#show flash
System flash directory:
File Length   Name/status
1   7517112 c1700-ipbase-mz.123-6c.bin
[7517176 bytes used, 25775112 available, 33292288 total]
32768K bytes of processor board System flash (Read/Write)
Router#show diag
Slot 0:
        C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 5.0
        PCB Serial Number        : FOC0849230K
        Part Number              : 73-7167-05
        Board Revision           : B0
        Fab Version              : 04
        Product (FRU) Number     : CISCO1760
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 34
          0x10: 39 32 33 30 4B 82 49 1B FF 05 42 42 30 02 04 FF
          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
        WIC/VIC Slot 0:
        FT1 4351
        Daughter card-Version 4 TLV Cookie Format
        Hardware Revision        : 1.1
        PCB Serial Number        : FOC09053XP1
        Part Number              : 73-8346-04
        Board Revision           : A0
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Deviation Number         : 0-0
        Product (FRU) Number     : WIC-1DSU-T1-V2
        Top Assy. Part Number    : 800-22193-02
        CLEI Code                : IP4I380GAB
        WIC/VIC Slot 1:
        FT1 4351
        Daughter card-Version 4 TLV Cookie Format
        Hardware Revision        : 1.2
        PCB Serial Number        : FOC10073JND
        Part Number              : 73-8346-05
        Board Revision           : A0
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Deviation Number         : 0-0
        Product (FRU) Number     : WIC-1DSU-T1-V2
        Top Assy. Part Number    : 800-22193-03
        CLEI Code                : IPUIAPRRAA

Hi Ron,
Slots 3 & 4 are for VICs only.
Have a look at the Location/ Function table here:
http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml
cheers,
Seb.

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

Very weird day in Firefoxland
First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
WOW!! Are the wheels off the wagon here or what!?!

Wireless router will not recognize password

My wirelss router will not recognize the password on the router. Would like to change it to something wowrkable.

https://customer.comcast.com/help-and-support/Wireless-Gateway
http://customer.comcast.com/help-and-support/internet/wireless-gateway-username-and-password/
http://customer.comcast.com/help-and-support/internet/securing-wireless-gateway-network/
http://customer.comcast.com/help-and-support/internet/broadband-gateways-userguides
http://media2.comcast.net/anon.comcastonline2/support/userguides/Wireless_Gateway_User_Guide_030811....

C2921 router will not bring up fibre SFP

c2921 router will not bring up fibre SFP
I can't get two cisco 2921 routers to talk to each other
the setup works find in my testbed with a rj45 cross over cable between them or even with a WANEM cloud emulator(free tool).
after migrating from CU to fibre they won't to talk to each other anymore. worse, both refuse to bring up their wan side fibre SFP.
the "media-type" sub i/f command was used to change to SFP from RJ45
after that, the EN SFP light appears on both routers, but no link light
sh int gi 0/1
GigabitEthernet0/1 is down, line protocol is down
Hardware is CN Gigabit Ethernet, address is xxx(bia xxx)
Description: ** TEST LINK
Internet address is 1.1.1.2/30
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is SX
the two routers are in different buildings and must pass through a middle building(#2)
B1 - 200m -- B2 -- 900m -- b3
R1 (in building 1) is 200m from building 2
R2 (in building 3) is 900M from building 2
R1 has a MM SFP in Gi 0/1
R2 has a SM SFP in Gi 0/1 as the distance is too far for MM
in building two we have used both a SM to MM media converter
and a layer two switch with SM and MM SFP,
both show similar results
R1(MM sfp) --MM cable-- (MM sfp) switch (SM sfp) --SM cable--(SM sfp)R2
on the switch( in Bld 2), we see links lights coming out of the two routers, for both SM and MM links, this is good and expected. no traffic is seen though
on either router, no link light is seen and both interfaces are down down. shut, no shut, does not bring them up
we have tried different SFP and cables, still no change
one google search mentions an undocumented ciso command to ignore incompatibale SFP, but that does not work in IOS 15
if we add a 3750 switch to the routers Gi 0/1 WAN side as a media converter, we get success.
each switch has two sfp, one Cu and the other MM or SM fibre .
the router "media-type" sub i/f command was used to change to RJ45 from SFP, after that, the SFP EN lights goes out(as expected) on both routers,
R1(CU)-(CU)3750(MM sfp) --MMcable-- (MM sfp) switch (SM sfp) --SMcable--(SM sfp)-(SM sfp)3750(CU)R2
why does this work and the connection on the rtr does not
sh int gi 0/1
GigabitEthernet0/1 is up, line protocol is up
Hardware is CN Gigabit Ethernet, address is xxx(bia xxx)
Description: ** TEST LINK
Internet address is 1.1.1.2/30
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is RJ45
this test is not practical in the deployed field and far too expensive
i am looking for a solution and want to know why the SFPs do not work in the routers
i tried two different MM SFP. neither one worked, though from SH INV, one can't tell them apart. on the CISCO site only this one is supported
glc-sx-mm, the SFP-GE-s is not supported on the 29xx rtr but is on the 3750 switch (;
================
%added SFP-GE-s SFP, the SFP-GE-s is not supported on the 29xx rtr but is on the 3750 switch
sh inv
NAME: "CISCO2921/K9 chassis", DESCR: "CISCO2921/K9 chassis"
PID: CISCO2921/K9      , VID: V03 , SN: xxxxSFP-GE-s
NAME: "1000BASE-SX SFP", DESCR: "1000BASE-SX SFP"
PID: FTLF8519P2BNL-C6B , VID: B , SN: xxxx
%============
%remove SFP and added glc-sx-mm SFP, this is the supported MM SFPO for the 29xx rtr
sh inv
NAME: "1000BASE-SX SFP", DESCR: "1000BASE-SX SFP"
PID: SFBR-5766PZ-CS1   , VID:    , SN: xxx
============
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
Cisco CISCO2921/K9 (revision 1.0) with 475136K/49152K bytes of memory.
Processor board ID xxx
9 FastEthernet interfaces
3 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
500472K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          xxx
Technology Package License Information for Module:'c2900'
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9
uc            None          None          None
data          None          None          None
Configuration register is 0x2102

Problem solved.
MAJOR untested bug in IOS 15.0(1)M3 which was the default image when we bought the devices
*** AVOID IOS 15.0 series ***
there are several bugs related to SFPs like:
does does recognize SFP
des not recognize some EHWIC cards such as, but not limited to EHWIC 1GE-SFP-CU
CSCtj35792
c3900 : gigE SFP should switch to 1000/FD if other side has no nego
Externally found severe (Sev2) bug: M-More
CSCth28824
c3945 GE shows DOWN/DOWN as compare to SFP
Externally found moderate (Sev3) bug: R-Resolved
They were fixed in 15.0(1)M4 or later
You can check the caveats for this IOS Release 15.0M:
http://www.cisco.com/en/US/docs/ios/15_0/release/notes/150MCAVS.html

WRT54G ver.6 wireless router will not connect either way

WRT5G ver.6 Router will not connect to the internet or other PCs wired nor wirelessly, PC shows "limited or No Connection". The orange light is not on and will not come on when I press the Cisco System Light/Button on front. I cannot access the router through the browser nor PING it through the command prompt. I have tried to reset it and unplug it for few seconds, please, me OBIWAN, your my only hope.

I think your router is bricked, You can try the steps on this link and check if it solves your problem or not.

Website will not retain password and username

In dreamweaver my websites will not retain the username and
password. Everytime i restart i have to enter the data in again.
Does anyone know why

As Alan said, if you haven't already update to 8.0.2
and this article may also help:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Forum Posting Guidelines:
http://www.adobe.com/support/forums/guidelines.html
> In dreamweaver my websites will not retain the username
and password.
> Everytime i restart i have to enter the data in again.
Does anyone know
> why

Manually Split the PO Shipment will not retain the Link with the PR

Hello Gurus,
If a PO is created from MO-PR-PO process and if you split PO line shipment into multiple distributions , The link between PO-PR will not be retained.
I am aware that this is a Standard Functionality , but it will be of immense help if anyone could help me to understand the complexity of the modifcation.
Regards,
Naveen Kaushik

Hi, did you find any way to solve this issue?
Did you think about automatic PO line cancellation an creating multiple req lines after that adding new req lines in to the same PO?

Router will not retain settings

Similar Messages

Maybe you are looking for