Router Wont Save Changes
When i go into my wrt54g settings on both wireless, and wired i try to make any changes to the settings and click save, and it says cannot open apply.cgi I tryed resetting the router by holding the reset button, also leaving it unplugged for 30 seconds. still the same thing.
My router is the wrt54g V.2 i upgraded the firmware to 4.21.1 about a year ago.
Now i have no password protecting my router. Any help would be great. thanks
I have WRT54G ver. 2, just upgraded to a new firmware 4.21.1, same problem now - attempt to apply any changes fails with an error to the effect the server is busy; try again in a few minutes. So trying to get past this, did a hard reset back to factory default settings (no security, default password, etc) and still no luck getting changes to apply. Well almost no luck. Seemingly at random, I just made a simple change to the IP address range and it took. But no luck setting admin password, changing wireless security, etc. Help!
Similar Messages
-
when i log onto my bank it prompts for id and password. i key them in hit enter and the page comes back with id and password empty. i tried changing settings for history from remember history to use custom settings for history, deleting cookies and restarting ffox. when i check the settings they say remember history again. i do not use ffox password save feature. stuck.
The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all history and cookie settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Did you check the cookie exceptions?
This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
If clearing cookies didn't help then it is possible that the cookies.sqlite file that stores the cookies got corrupted.
*Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted. -
Itunes wont save changes to apps
Im trying to sync my ipad, but the summary bar at the bottom won't reflect the changes I want to make. Next to all the apps that I don't want on my ipad is "will install" I select it so it goes to "install" (removing the app from syncing to ipad) but when I then select "apply" itunes automatically changes each one back to "will install" and then it goes on to sync and install all the apps I don't want. FRUSTATING! I am leaving for an overseas trip in 2 days and I want this ipad filled up how I want it.....
You rock!! should of asked that 45 minutes ago, haha. Thanks!!!
-
Email prefs won't save changes
my isp help line cant help.
He says"permissions not saving changes.
com.apple.mail.plist wont save changes.
He says the emailer could be corrupted.
HELP!
Is there an alternate email program I could use?
Thanks!
Mail version 7.1AirMail is available from the App Store and some people have reported success with it.
Mail Alternatives – 9 Free Email Programs
Mail Alternatives Review
Mail Alternatives Review (2) -
Settings changed wont save after reboot
Any changes that i do in my Mac, wont save after reboot.
If i change the settings on my mouse (unchecking Scroll direction) next time i reboot, it will be checked again.
Any changes that i do to my Finder sidebar (like adding My Main Drive not visible, add downloads and pictures, change the foler view as columns) they are all gone after i reboot. Its getting freakin anoying. I Google for a solution but to find none.
When trying to opening Calender, it says that i dont have permission. I have gone to the application and checked and made sure that all acounts have r/w permissions.
On the Dock, i uninstalled an app and next reboot i will get a question mark, even tho i removed it before it comes back after the reboot.
Thanks for listening.
Burn1natorMay sound silly, but are you sure you're not logging in as the 'Guest' user? What privileges does the user account you're using have? Check in
> System Preferences... Users & Groups
that the account you're using is Admin. If you're using a Standard account, are parental controls enabled?
If you are admin, try resetting your permissions and removing the sys pref property file. Before you do that, backup your system and user data. Once you're backed up, open Terminal and copy/paste the following into the Terminal window:
rm ~/Library/Preferences/com.apple.systempreferences.plist
hit 'return'. If the prompt returns without an error (as it should), paste this
sudo chown -R `id -un` ~
hit 'return'. Enter your password as requested, but type carefully as it will be invisible while you do.
This will take a while, but after the command finishes (i.e., when the prompt returns), restart the mac.
After the restart, set the mac up the way you want, then test whether the problem is fixed by restarting again to see if your changes were kept. -
Illustrator CS4 wont save files, please help?
You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
Thanks.
We are running CS4 on windows7 - yes PC!!!We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
The files are saved over a network connection to a large external hard drive.
Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
Hope maybe you can help with any thoughts at all.
Cheers.
Date: Thu, 24 Jun 2010 03:41:40 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS4 wont save files, please help?
What file format do you save it in?
What kinds of changes did you make in that file?
Where do you save the file (removable or network media)?
> -
Webvpn - can't save changes to applications
Hi,
I have Cisco 1940 router with IOS version 15.0(1)M4. I have configured WebVPN for access to my internal applications.
From Chrome and Mozilla I can login to webvpn portal and than to applications, but I can't save changes (input) to applications .
In IE application is not displayed at all, I get blank page.
Also, some images in application are not loaded.
I think that there is a problem with webvpn java script, which doesn't terminate lines with ";".
In Java Console I get following errors:
Uncaught SyntaxError: Unexpected token ; page.jsp:289
Uncaught ReferenceError: EditDescriptionMessages is not defined page.ext:572
Failed to load resource: the server responded with a status of 404 (Not Found) https://xxxx
Uncaught ReferenceError: hideSelectionCursorIfNeeded is not defined
Do you have any ideas or suggestions for my problem?
Here is my configuration:
interface GigabitEthernet0/0
description eth0
ip address y.y.y.y 255.255.255.0 secondary
ip address x.x.x.x 255.255.255.252
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
hostname EXAMPLE
ip domain name Example.com
ip name-server z.z.z.z
ip name-server n.n.n.n
crypto pki trustpoint SSL
enrollment selfsigned
ip-address x.x.x.x
subject-name CN=x.x.x.x
revocation-check none
rsakeypair SSL
no ip http server
ip http secure-server
webvpn gateway EXAMPEGW
ip address x.x.x.x port 443
http-redirect port 80
ssl trustpoint SSL
inservice
webvpn context cont1
ssl authenticate verify all
url-list "APPS"
url-text "app1" url-value "http://192.168.1.1"
policy group poli1
url-list "APPS"
default-group-policy poli1
gateway EXAMPEGW
inservice
end
* crypto key gen rsa label SSL [512]
I will appreciate your help.
Thank you in advance.Henk:
I believe it's more a Leopard and permissions thing than iPhoto. Did you upgrade to leopard via the Archive and Install method? Try running ACL Fix on the iPhoto Library package and see if that makes a difference.
Secondly, create a new test library inside the Shared folder and import some photos into it and see if it will operate OK. If it does you can use the paid version of iPhoto Library Manager to merge the old library into the new one and use it.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
I was trying to delete an FTP saved password, and it deleted all of my passwords on Key Chain. Now all of my passwords wont save. I am very frustrated right now. How come every time I change a setting on a mac, something goes wrong.
I found the problem, I fixed it. I know what happened. I clicked delete KeyChain. Not delete. But I got my passwords back. I clicked on login.keychain
-
for some reason my preferences wont save in my newly updated itunes6.0.2 Every time i turn Itunes off i have to change my setting IE: Party shuffle always reverts back to displaying 5 recently played songs and 10 upcoming songs? Also the Browser must be turned on every single time, as well as turning off the mini store? can anyone help?
no i haven't.. it will do this even when i am not playing out of a playlist , sometimes from party shuffle, sometimes out of my library.... i will though thanks!
-
Photoshop wont save actions, I create,
my hard drive was just replaced and the data and applications were all transferred over, now photoshop wont save new actions or presets I create, it says I dont have permission. Not sure what to do, I dont really want to have to reinstall everything if there is a quick fix.
okay so thanks to everyone for your help between this information and some other I found online I got it sorted, my library folder wasnt showing up, I have just also recently upgraded to maverick os, so the library folder show up you need to unhide it, this was a great source telling me how to do that http://www.macworld.com/article/2057221/how-to-view-the-library-folder-in-mavericks.html
then I just went into the user/library/adobe cs5 settings/ and changed the preferences so I was the owner of that folder. -
ALV Grid: how to save changes made in an editable Grid
Hi,
How to save changes made bu the user in any of the editable cells in a ALV Grid?
Regards,
deb.Hi,
If you are using the FM look at the following example code...
data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.<<<<<------
gt_layout-zebra = 'X'.
gt_layout-detail_popup = 'X'.
gt_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND1'
it_fieldcat = header
is_layout = gt_layout
i_callback_top_of_page = 'TOP-OF-PAGE1'
i_grid_title = text-h17
it_sort = gt_sort[]
i_default = 'X'
i_save = 'U'
is_variant = gt_variant
it_events = gt_events
I_GRID_SETTINGS = LC_GLAY<<<<<<------
TABLES
t_outtab = itab.
clear itab.
Form USER_COMMAND1
FORM USER_COMMAND1 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
case u_ucomm.
when '&DATA_SAVE'.<<<<<<<<----
This will come after the data was EDITTED and when SAVE was clicked by user in output scren.
Here now in the final internal table(ITAB) you can find the data changed in EDIT mode.
After this you can do manipulation what ever you want.
Thanks.
If this helps you reward with points. -
I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to access the new versions on my iMac?
That is Apple's statement:
Using iWork with iCloud Drive - Apple Support
Options for iWork customers
You can upgrade to iCloud Drive today if you want to keep your documents up to date in iOS 8 and OS X Yosemite, and you want to use the iWork web apps on iCloud.com and the Share via iCloud feature.
You can upgrade to iCloud Drive later if you want to keep your documents up to date with your apps on iOS 7 or earlier and OS X Mavericks or earlier.
Upgrade to iCloud Drive today
To access the most recent versions of your documents from a Mac with OS X Mavericks or earlier, you’ll need to go to iCloud.com and access Pages, Numbers, and Keynote from there. On a PC, you can install iCloud for Windows and set up iCloud Drive.
If you upgrade to iCloud Drive now:
Your documents will keep up to date across devices with iOS 8, Macs with OS X Yosemite, PCs with iCloud for Windows, and iCloud.com.
Your documents will no longer keep up to date on devices with iOS 7 and Macs with OS X Mavericks or earlier.
You’ll be able to use the iWork web apps on iCloud.com.
You’ll be able to use the Share via iCloud feature with iOS 8, OS X Yosemite, and iCloud.com.
Documents you previously shared via iCloud will be accessible to collaborators.
Upgrade to iCloud Drive later
Note that until you upgrade your iCloud account to iCloud Drive, you won’t be able to use the iWork web apps on iCloud.com or the Share via iCloud feature. If you don’t upgrade to iCloud Drive at this time:
Your documents will keep up to date across devices with iOS 8 and across devices with iOS 7 and Macs with OS X Mavericks or earlier.
You won’t be able to use the iWork web apps on iCloud.com.
You won’t be able to use the Share via iCloud feature.
Documents you previously shared via iCloud won’t be accessible to collaborators until you upgrade to iCloud Drive. -
How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?
I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
axAcroPDF1.LoadFile("myfile.pdf")
axAcroPDF1.Show();
MessageBox.Show("Showing...");
This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
Thanks again. -
Error message: iMovie cannot save changes to the library!?!
iMovie crashed my computer and now I can't creat a new movie.
Here's the full error message:
iMovie cannot save changes to the library.
The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
Please let me know if you have any suggestions.You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) . One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects). If you can then iMovie itself is OK. If not then the only other thing I can think of is re-installing iMovie (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
Is everthing else working OK after your computer crash? Maybe you should also run Verify disk in Disk Utility.
Maybe someone-else has some other suggestions (I have not heard of this problem before)?
Geoff -
Get error message when exiting premier Pro wont save file
I am getting an error message when I exit adobe premier pro it wont save the file and the program locks up. I even uninstalled an reloaded the program CS5.5 vrs. still get the same error can anyone help?
You have not provided any system information or other technical details, so we can't know anything. Either way, ask in the Premiere Pro forum.
Mylenium
Maybe you are looking for
-
Any captions containing variables are blank upon publish - only on my machine
Hi, Just wondered if anyone has encountered this one. I've used variables to tell a user how many items they performed incorrectly (using $$VariableName$$--see attachments). Upon previewing and publishing on my machine only, I get a completely blank
-
Hi All, I am facing this ORA-00600: internal error code, arguments: [12209], [0], [], [], [], [], [], [] in my production database oracle 8i version. kindly let me know actions to be taken. thank you
-
Updating the material moving average price in return to vendor process
Hello, Our finance department is saying that the affect on the moving average price in our return to vendor process is wrong. At the moment the moving average price is changed according to the material price in the return PO. Our financial department
-
Using Google Docs Freezes or goes grayscale and makes me restart
I'm using a 21in iMac 3.6i5 with 8gb ram. I've had the mac for just over a month and it's frozen like 6 times in the past two days. It's only frozen using google docs, though it's gone grayscale and made me restart at least twice without google docs
-
I am having browser issues, Please help?
I am desperate. I have a Mac Book Pro and I definitely am an Apple fan, However a year ago while an automatic software update was loading, My Safari crashed. Nobody has been able to get it to work, So I have tried other browsers, Firefox, Camino, Goo