Router working but wireless stopped

Hi, I been using my WRT54G with no problems for 2 years now. Last night I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router. What do I do next?

I beive you need to manully change some wireless settings on the router and that may help you.....So try the following steps.
Come to wired pc which is online.....Click on start....Go to run....type CMD...Enter....a black window will appear...Type ipconfig....You will get a ipaddress and a default gateway....
Open a internet explore page....and in the address bar type the default gateway (i.e http://192.168.1.1 )....hit enter... it will ask you for the user name and pasword....enter the password "admin" click OK.....it will take you to the setup page of the router....click on the wireless tab and the network mode should be Mixed , change the network name SSID , change the channel to 9 or 11 and the SSID broadcast should be enabled...
If you want to make the network secured...then click on wireless security tab under wireless and change the security mode....make it wpa personal and enter any password in wpa shared key box... the password should carry atleast 8 characters...then save the settings... and then go to wireless device and try to find the wireless network name once you find the network enter the password that you created and then you can join the network.

Similar Messages

  • Track motion - working but AE stops responding so must force quit

    Hi,
    I'm on:
    AE CC 2014 v13.0
    PC with Nvidia k4000 and 32GB RAM
    Working with 4k R3D footage.
    I'm using track motion (transform - position, scale and rotation) on a precomped layer that has 2 circle effects on black background. (I'm trying to extract warp stabilizer data because the stabilizer works great for 98% of the shot but does something silly in the middle of the shot so I want to key frame the stabilization).
    The tracker seems to be working but after a while I can't stop the tracker or do anything else within AE. The program hasn't crashed but it fails to respond to any commands. Even once the tracker gets to the end of the clip and stops I still can't do anything.
    Really I just need the position, scale and rotation data from an applied warp stabilization of a certain clip. Anyone have an alternative way of doing this?
    Really wish warp stabilizer had some key frame control!
    Thanks,
    Josh

    Take your RED footage out of the equation. this stuff is flaky in CC 2014 and may have all sorts of ill side effects. Also check the track settings and the duration. Perhaps it's simply too long and AE takes forever to create those gigazillion keyframes...
    Mylenium

  • Router works but not harddrive

    Hi,
    I have recently bought a Airport Time Capsule and it's been working on and off on our different devices.
    Would really appriciate some "pro advices" on the problems I'm having.
    Here the router works fine and it's connected to the internet, but I can't seem to connect to the harddrive as a shared unit in finder. I have tried to make a copy of the harddrive and that works but everytime I click on the Time Capsule icon in finders left menu under shared, finder disapperas and the comes back after one second like nothing happened.
    Thanks in advance
    Erik

    I just need to check you are actually on Mountain Lion and not upgraded to Mavericks??
    In finder did you tick all the network options in preferences. Network drives do not show unless you make them.
    If you have all of that right..
    Start over.. the TC can be a painful little beast..
    First thing is a simple reboot.. unplug the TC, count to 10.. plug it back in again.
    Does it show up now??
    No luck.. do a full factory reset..
    When you redo the setup use all names that are short, no spaces and pure alphanumeric for everything..
    See C9 for why this is important.
    http://pondini.org/TM/Troubleshooting.html
    Try again mounting the TC hard disk..
    No luck.. manually mount.
    In Finder, use Go, Connect to server and type in the address thusly.
    AFP://TCname or TCIPaddress (you can use either.. name is better .. do not use IP if it is bridged as the IP can change.. if it is the main router then IP works ok).
    The computer can hopefully find the TC.. and will ask you for a password.. by default it is public. Store it in your keychain so the mount is easy next time.

  • HT204380 When on someone's Facebook I can not send them a personal message? I can post a note on their Facebook but all their friends can see it. It used to work but has stopped? Can anyone help. It's a iPad 2 and iPad mini ?

    When on someone's Facebook I can not send a personal message? Only post a note on their Facebook which all with access can see. It used to work but recently has stopped on my iPad 2 and ipad mini.
    Any help please

    Hey Johncuff47
    If you are experiencing an issue with the Facebook app, you can try the troubleshooting steps in the following article to resolve the issue.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • LAN ports not working but wireless is fine

    Just purchased AE to use with my Zoom comcast modem (no router function on the modem).  The wireless function is working flawlessly but I am not able to get IP addresses to hardware attached to the AE via the LAN ports.  I've cycled and reset until I'm blue in the face!  Any recommendations are greatly appreciated!

    There are no settings to check. The Ethernet ports are enabled by default when the AirPort is operating correctly.
    As a last resort, you could reset the AirPort back to default settings and then set it up again if you have the time.  Hold in the reset button on the back of the AirPort for 8-10 seconds and release, than allow a full minute for the AirPort to restart.  Then, set it up again and check the Ethernet ports.
    I assume that you have checked to make sure that you have a good Ethernet cable.

  • T500 Ethernet Connection Not working, but wireless is working

    Hi
    In my laptop, when I try to connect to internet using the Ethernet card, it is not working.
    My laptop has the following configuration.
    T500; Windows Vista 64
    Ethernet card: Intel(R) 82567LM Gigabit Network Connection
    Following are what I observed.
    1. From command prompt, when I executed the command ipconfig, it is not listing the ethernet adapter connection.
    C:\Windows\system32>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : Palasseri-Mana
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Wireless LAN adapter Wireless Network Connection 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : My WiFi PAN
       Physical Address. . . . . . . . . : 00-21-6A-1A-24-B3
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : WiFi STA
       Physical Address. . . . . . . . . : 00-21-6A-1A-24-B2
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::42a:c2e2:cf9f:7b87%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.0.12(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Sunday, February 21, 2010 6:12:15 PM
       Lease Expires . . . . . . . . . . : Sunday, February 28, 2010 6:12:14 PM
       Default Gateway . . . . . . . . . : 192.168.0.1
       DHCP Server . . . . . . . . . . . : 192.168.0.1
       DHCPv6 IAID . . . . . . . . . . . : 234889578
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-88-93-46-00-24-7E-13-AE-17
       DNS Servers . . . . . . . . . . . : 192.168.0.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 6:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{7DB78E75-7547-408D-97D2-C347AF27F
    5F9}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{5D3FE014-FD4D-40E1-AB3A-94B48F4A9
    392}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 14:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 02-00-54-55-4E-01
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    2. Control Panel\Network and Internet\Network Connections : Under this, when I list all the connection, the Ethernet connection is showing it as Enable.
    3. When I unplug the network cable, at Control Panel\Network and Internet\Network Connections, I see the status as Cable Unplugged..
    4. I downloaded the latest driver and installed, but didnt change this behavior.
    How can I fix this ethernet issue. Any help is deeply appreciated.
    Thanks,
    NP

    palasseri wrote:
    Thank you for your reply.
    Yeah, it is listed under the Device Manager.
    I see one potential error under the event viewer. Thank you for that pointer.
    The IP address lease 192.168.0.11 for the Network Card with network address 00216A1A24B2 has been denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).
    Any idea why this is coming???
    I get that exact same error when I change my MAC address and my computer is trying to connect to my router.
    This message is probably just the result of your computer not recognizing your Ethernet Adapter.
    I have never had this problem and am just shooting in the dark, but I would say you either have a bad Ethernet card, or your Adapter is not configured correctly.
    I keep wanting to go back to your adapter in the Device Manager.
    Is the Device Status "This Device is working Properly"?
    Under Power Management, is the "Allow the computer to turn off this device to save power" unchecked?
    Are you downloading the drivers from Lenovo's website?
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70199
    Have your tried Uninstalling the adapter, and reboot.
    Your system may automatically reinstall the adapter.  If not, you can manually reinstall it.
    T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

  • Router works but still no internet?

    I can pick up my wireless network on my computer but it does not connect to the internet. The internet works though when i plug it directly to my computer. any suggestions?

    Please state the following:
    1)  your ISP
    2)  the model and version of your router
    3)  the make and model of your modem
    Also, connect your computer, by ethernet wire, directly to your modem.  Verify that your Internet connection is working, then do the following:
    Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key.   Post your results.
    Message Edited by toomanydonuts on 12-07-2007 12:00 AM

  • Wired works but wireless does not

    I am posting this for two of my friends. Both of them have the same problem. They both brought their laptops to my house and connected wireless to my belkin router automatically. No problem. They both went home to their houses (two different friends both with linksys in their houses) and could not connect to their own linksys routers. They tried to repair connection but router did not show up as available. They both also have desktop computers that are wired and connect to the Internet without any problem. They both also wired their pc's to the router and connected without any problem. When they tried to connect wireless, they could not. We tried turning off the modem and router and pc and reboot the modem, router and pc again. Still only works when wired, but not wireless. By the way, they tried connecting wireless in the same room next to their router so there should not be any interference or something blocking the signal. Also they both have a Toshiba laptop with a built-in wireless.
    Any suggestions?
    Adam
    Message Edited by starace on 05-19-200711:38 AM
    (Mod note: Removed non-public information. Thank you.)Message Edited by Vince_02 on 05-19-2007 08:58 AM

    Hi, have your friends check the status of their adapter. And if it is working fine, ask them if they have trief already setting up the wireless settings of the router?
    Take the risk. Conquer your limitations!

  • My wireless key board does not work but wireless mouse does?

    I can not get my wireless keyboard to work again after i changed the batteries, It work sonewhat before I chaged the batteries but don't work at all now. I tried removing the thing pluged into the usb port and i pushed the connect button on the bittom of keyboard but nothing works. The wireless mouse works fine. What could be wrong?

    Not sure which KB you have, but I'd check a few things.
    1) You might have a dead battery or two - perhaps try batteries known to be working in another device, such as a TV remote control.
    2) The KB shouldn't need to be re-synced just via a battery change.   However, if you do resync - you might need to hold the sync button longer.   On my TouchSmart IQ804, I usually push mine about 10 seconds or so.   I can pull the USB tranceiver out of the back of the unit and put it in the side/front port, that way I can watch the LED that indicates sync/transfer better.
    I know that there are some good wireless KB troubleshooting documents on the HP website - here is a link to one of them.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&lc=en&cc=uk&dlc=en
    -DM (a long-time HP employee)
    -DM (HP Retiree)
    NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
    If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

  • Wired Connection Works, but Wireless won't connect

    I just got the Wireless-N Broadband Router and I have my Home computer connected to it through a LAN connection. And I have an internet connection. But on my Laptop the only thing that my WiFi connection picks up is HPsetup (Is this my Linksys Router?).. The Hpsetup has a very low connection by my Linksys Router. And the signal fades in and out.

    what Conection protocol does your Laptop use?
    PreN, 802.11g, 802.11b?
    Regards Simon
    NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
    QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
    Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

  • Router works but when security is on the laptop says that the password is not correct

    I just hooked up a WRT54G v8.0 router. My home computer uses XP and the set up went fine. I have a Mac laptop. When I go unsecured the laptop can use the network. When I set the security on, the laptop login says that the password is incorrect. I have changed the password once and nothing changed. I have triple checked the password, so I know it is correct.
    What can be causing this problem?
    THANKS
    bej

    I tried wep security and it was on the 128 setting and it did not work.
    Any other suggestions as I looked over the security settings and everything looked ok.
    I saw some old problems like this that mention maybe putting a certain sign like a $before the password on the mac. Have you ever heard of anything like that??

  • Lan/Ethern​et not working but WIRELESS is... PLEASE HELP!!!

    Good Afternoon,
    I have an HP Omni-220-1025 and had to have my hard drive replaced, since that time I have been unable to go on the internet using the Ethernet setting.  My ISP came here to check their wiring to make sure and the technician told me I was missing those drivers.  Not very tech savvy (as I am learning) but I cannot seem to figure this out.
    Any help will be greatly appreciated.   P.S.  The computer also has BEATS Audio which is not working as well.... seems like drivers were not reinstalled.... Thanks just me rambling...
    This question was solved.
    View Solution.

    Hi:
    Sorry that didn't work either.
    The specs for your PC indicate that it has the Realtek 8111 gigabit ethernet adapter.
    Please see if installing the chipset driver gets the ethernet controller to wake up from its deep sleep.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=cp-103327-1&cc=us&dlc=en&lc=en​...=

  • Have valid serial number,trial works but activation stops with "can't find CS5 on this computer"

    Purchased and installed Contribute CS5 after changing computer/Windows 7. Have valid serial number which is accepted onthe activation screen, however it says it cannot find CS5 on my computer and lists CS3 and CS4. The Trial version works and I have been going this route however now I am out of trial usages...help please! Going through another marathon phone session with Adobe to sort out another installation/serial number issue is not in my workday plans. BTW, this is only installed on this one computer.

    Perfect! Thank you! I did purchase/install as an upgrade. Did not notice the black space to the right was to input the previous version serial number...fixed!

  • Down load works but insatllation stops because old file is corrupted

    Adobe Reader will not install.

    Are you still encountering the issue. Can you pls. give in more details? Try downloading the software from http://get.adobe.com/reader/enterprise
    Thanks,
    Vinod

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

Maybe you are looking for