Router (WRT310N) Just stops working...

Well I play Halo and whenever I host a server, there's usually no issue with the lag or anything, but usually after I restart a game, maybe 10 minutes into the new game the router just stops working completely... It's still on but is not connecting to the internet or anything, it doesn't work until I shut it off and put it back on..
Can someone help me with my problem?

I guess you should try to upgrade/flash your router's firmware...
Download Firmware 3.23 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
See if this fixes your problem...

Similar Messages

My ipod touch 5th generation keeps wifi signal for 10-30 minutes and then just stops working.

I've had my ipod for about a month now and it worked fine up until this week.
This week I noticed probelms with the wifi. I would be just on facebook or browsing the web and the wifi would just stop working. Every time I turned wifi off and the on again it would give me about 5-10 more minutes of wifi before I had to do it again. I've never expeiranced this with my other 4th generation or 3rd generation ipod touches. The wifi itself is not the probelm because it works just fine on my laptop. Today I updated my software and the probelm was not resolved.
I need help sould I got to the Apple store and have them check it out?

Does the iPod have the problem with other networks?
Do other devices work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DOes the router have the latest firmware?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

WRT54G - wireless just stopped working on all devices

Hi All,
I've had my WRT54G for a couple of years and have my Desktop hard wired (to the router) and 2 laptops and an ipod connecting wirelessly succefully for the past 2 years.Woke up this morning and nothing will connect wirelessly,finding the router is intermitent and when it does it cannot establish a connection with it. I can connect the devices via the network cable directly to the router and all works fine, it's just wireless that has suddenly stopped working.
I have tried 'turning it off and on again" turning WEP off, changing WEP password etc. but nothing seems to work. Im at a loss as to why my entire wireless network/connection has just stopped working?
Any ideas?
Message Edited by coldfuel on 02-06-2009 07:36 AM
Solved!
Go to Solution.

I'm having a similar problem. This past month or so, the router just kicks my wireless computers off the network. Then I can't find the network at all. My work around has been to go into the wireless setting (via my hard-wired computer) and change the wireless channel from 9 to 11 or vice versa. This keeps the network connected for a day or two and then kicks us off again until I change the channel.
I've looked into the solution previously posted of upgrading the Firmware but I'm having a difficult time doing so. I'm on a Mac and the firmware downloads seem to be for PC. The other problem I'm having is that my model is WRT54GS (no version number). Should I assume this is version 1.0? I think so. Anyway, like I said, when I download the firmware for that unit, it shows up as a bin file (WRT54GSv3_4.71.4.001_fw,3.bin). I then expand it and it becomes a cpgz file (WRT54GSv3_4.71.4.001_fw,3.bin.cpgz). And back and forth, over and over again.
How can I upgrade my firmware on my Mac?
PS> Current Firmware Version: v2.07.1
Message Edited by Enyko on 08-19-2009 07:05 AM

Location Services just stopped working

So my problem is that I wasn't using location services really when I first got my iPad 2 but when I downloaded an app game it just stopped working. Facebook was able to locate me before and google maps as well. I've tried just about every troubleshooting advice I've seen in this forum. Resetting, hard restart etc. but I'm wondering now if there is a problem with my router since I don't use my iPad except when I'm at home. I don't know of an apple authorized dealer in Jamaica to fix this so if I can't solve it I'd have to send it to one in the US or if I travel there take it to one to be checked up. I don't know what to do next..but I really feel handicapped without the location services.
What to do?

Have you tried taking it out in the open where it can access GPS satellites?
The buildings around you may be blocking the GPS satellities.

HT2284 My Time Capsule just stopped working.

Thank you in advance for any help. My Time Capsule just stopped working and I do not get the 'Connection Failed' error message as the Time Capsule is not showing up in the finder window. The light continues to flash amber on the Time Capsule. I am using it with my iMac running Lion. Any help will be really appreciated.

This is just typical Lion.. reboot the TC.. if that doesn't work.. reboot the whole network from fully off.. in order.. modem.. router/TC.. clients. 2min gap between each.
If still has issues.. press reset on the TC and redo it.
Download a utility that has tool properties..
http://support.apple.com/kb/DL1482
Just ignore the toyland version in Lion.
Next time it happens go to disk page in the utility and hit disconnect all users..
C12 and C17 can suggest some other things.
http://pondini.org/TM/Troubleshooting.html

DHCP just stopped working !?

Hi, I have Macbook Air SSD running Leopard 10.5.2 (9C7010). Boot ROM version MBA11.00BB.B03
It would appear that in the middle of the day, DHCP just stopped working. It doesn't matter whether wireless or connecting via the USB ethernet adaptor. If I want to get network connectivity, I have to manually assign the right IP address, router address, subnet mask and DNS addresses.
While I was travelling from UK to India this weekend, DHCP just stopped working - default "Automatic" network location.
It worked at home, it worked from the BA airport lounge.
When I arrived at hotel in India, I could not connect. Network Prefs reported a locally assigned IP address. I contacted their IT dept and got static IP address, router address, DNS addresses, and then everything was fine again.
In the office in India, no joy again with DHCP and it reported locally assigned IP address. Again, when I got static IP/router/DNS from our IT helpdesk, everything was fine.
Now I returned home, and it's just the same. DHCP not working, but if I assign a static IP address on my own home 10.x.x.x subnet and manually tell it the gateway address and DNS servers, everything is fine again.
I have rebooted quite a few times. I didn't install any new software or change any settings - it seems to have simply stopped working on the plane between UK and India !
Anyone else had DHCP problems like this ? Or have any idea how to get it working again ?
Cheers
The Baron.
Message was edited by: Baron15

Just got back from the Apple Genius Bar.
They booted my MBA from a separate boot disk, and the DHCP worked fine. That proved it was a software settings fault rather than a hardware fault.
They then tried deleting all the Locations from network setup, and adding a brand new fresh one. Sadly that had no luck.
They then advised me to try an archive/install of OS X from the original media. If the archive/install doesn't work, they said to come back to the Genius Bar with the install media and they will book a longer appointment
When I got home, I first created my own boot disk on a spare USB hard drive, and confirmed that if I boot my MBA from this fresh installation, the DHCP works just fine. So I am hopeful about the archive/install.
I am trying it now. If I have any luck, I will let you know. Also how painful it is copying over previous user settings, applications and so on.
TB.

Wireless just stopped working..

Hi,
My wireless used to work but not it just stopped working and it works sometimes but mostly not.
I have three other mac laptops in my house and a few computers and they all work with the linksys router and they get on wireless fine.
but when I try to connect with the windows vista laptop it says this computer does not have a wireless network adapter installed and configured...?
and the wireless switch is always orange no matter which way I turn it.
how do i connest to wireless!
thanks so much in advance
the model is a 32-bit hp pavilion dv600 - dv6405us
Message Edited by computersrcool on 08-22-2009 04:37 PM

You may want to ask this on this forum for computer networking. This one is more for networked printer problems.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Applets just stopped working

Java Applets just stopped working on my machine the other day. They now persistently give me a "Failed to Load" message that says "Applet notinited" in it.
I've tried rolling back my machine before Tuesday's Windows Update, but it was VML-related, and probably not the cause of this (plus, the rollback probably would have fixed it if it were the cause). I also tried many different version of the JRE, and removed previous ones entirely before getting new ones. I've tried everything from the latest to older ones, and no luck.
I searched for this error, and Sun points you to proxy settings. Since I have no proxy, and since only my laptop, and not my wife's behind the same router, is affected, I know it can't be that.
Does anyone have any other clues? It's really annoying. And it seems to have happened completely out of the blue. I just can't use Applets any more. I changed no settings and messed with nothing. I'd hate to have to reinstall Windows just to fix Java.

Hi, are you running a macmini Intel?
Launch the Console app [ Applications/Utilities/Utilities folder] do you have any message there regarding Java, and what are they if any?
I presume you have the latest Java updates, and have run your Software update to check?
Do you have these showing in the Safari menu bar under Help>Installed plug ins:
Java Plug-in for Cocoa
Java 1.4.2_09 Plug-in (Cocoa) — from file “JavaPluginCocoa.bundle”.
-------MIME------------Type Description--------Extensions
Java Web Start Applications------application/x-java-jnlp-file---jnlp
application/x-java-applet-------Basic Java Applets-----------javaapplet
Did you recently update Java? see this from Apple.
document
IThank you!! The test account works. Now how to I fix my name account so it works, too?
You are welcome; ) If that doesn't help any...since this is user name account specific problem ONLY,as the test account indicates, see if the advice from Hayne his is post count 7 helps you any. I think it is worth the effort, you may also.
What does this Test tell you.
Does this work work for you showing a wavy? moving line of text
I don't know if any of this will help, I hope so. Good luck!
Happy Holidays to all here!
Eme'~[)
p.s. Spindoctor sorry for your Java problems.
create a new user account and all apps,
No not new apps, just to see is the problem is system wide; )

Airport Extreme Card just stopped working -help!!

I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
I have a WIFI printer connection and the airport will not connect to that either.
This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
Any suggestions before I and the laptop go hurtling through the first floor window?

Hello MiBy. Welcome to the Apple Discussions!
I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
Try resetting your MBP's PRAM ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

WRT150N router has suddenly stopped working - please help :)

I really don' know much about how routers work, so I am hoping you all can help me. I have a home PC and an HP notebook. We have a cable modem and a linksys wrt150N wireless router in order to use the laptop around the house. It was working fine up until 2 days ago, when it suddenly just stopped working. Nothing has changed. I've tried unplugging, rebooting, resetting the little button on the back of the router. I've tried clearing and refreshing the IP address. The wireless and the security lights aren't lit up anymore. I have tried to repair but I get the errors can't acquire a network address, and can't renew the IP address. I've tried reinstalling the cd that came with the router. I get router not found. Please make sure the router is properly connected. I don't know what to do anymore. I can't get to the router set up because I can't use the internet without bypassing the router and connecting directly from modem to computer. Is there any way I can fix this or is this router toast? We've only had it for 2 years. I am running XP on the PC, and Vista on the laptop.
If anyone has any idea what is wrong, please please let me know. I have school work to do on the laptop and really need my wireless connection back.
Thanks so much.

If you are unable to configure your router using the setup disk, then you can configure all the settings on your router manually.
Click here to configure your router for cable isp.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi.

Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory settings and restored, still no wifi. Will next release of iOS address this problem?

Hey there kevin8!
I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990

Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

I totally feel for you. Just upgraded from cs4 to cs5 and it was the biggest mistake i ever made. It will probably end my livelihood as a photographer since EVERY time i open a raw file it crashes photoshop, makes it freeze up after i have adjuted the file in camera raw then I hit open; i get a few bars then it just stops working.
Even got tech help, which helped when i was on the phone with them. The next day the problem came back even when I danced the same jig that I did when I had the guy on the phone - he had me move a raw file on to the desktop rather than take open from my hard drive, then I was able to open it, so we came to the conclusion that my drive was corrupt. I had the same information backed up on a brand new hard drive so we compared files from the each drive against the other. The files from the new drive opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw or dng files at all from anywhere so it can only be a problem with photoshop. We thought we had the problem solved but we did not. This never happened on CS4 unless i was trying to open 30 or more raw files, and even then it gave me a warning that it had no more ram, it didn't just lock up and do nothing. I'm at my wit's end. Even though there are a lot of great new things in cs5, they aren't very useful if you can't use the product to do the simplest thing.

1) Install the Photoshop 12.0.1 update
2) Install the latest ACR update.
If problems continue after that, then there probably is something wrong with your system.

My Ipod just stopped working, the screen got black and now I can't open it. I have tried to charge it but it doens't work.

My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?

Try:
Turn on without Home/Power Button

My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

Router (WRT310N) Just stops working...

Similar Messages

Maybe you are looking for