Routes and Transit times with Global ATP

If Global ATP is used where are the transit times managed usually? in SAP or APO. Since Transit Times are in Routes in SAP. Is there any equivalent data management point in APO?
Thanks
venkat Jupudy

Hi Venkat
You can either call scheduling locally in R/3 and also in APO as part of GATP function.
Transit times are maintained in scheduling steps( creating condition records of condition technique scheduling) for condition type TRAN.
Route determination can be done in R/3. There is a possibility of dynamic route determination in APO but I guess it requires TP/VS and gatp functions.
Regards
Mohan Venkat Ramana Chunchu

Similar Messages

  • Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

    Castle15 wrote:
    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
    Cannot get the Apple.. what?
    Model and actual device you are talking about?
    Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
    You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • Need explanation on prerouting post routing and translation rouitng with examples

    Hi ,
    i need explanation on prerouting post routing and translation rouitng  with examples.can anybody help me out ?
    thanks in advance
    regards
    bala

    Hi,
    prereouting: call comes in, hits ICM, script is run, telling the routing client (PSTN) where to route the call to (so the call is routed before (pre-) connection, or rather, establishment).
    Postrouting: call comes in, is connected and then it hits ICM (so the call is routed after begin connected).
    Translation routing is an interesting hybrid: call comes in, is connected but the party the call is connected to, is being monitored by ICM (so it sends the call away but it keeps an eye on it). When it's necessary, call is transferred to a different destination.
    Examples:
    Prerouting: PSTN -> ICM (script) -> PSTN -> destination phone answers
    Postrouting: PSTN -> call is answered -> ICM -> transfer to destination phone, answered
    Translation routing: PSTN -> call is answered -> ICM transfers to IVR port, then transfers to final destination phone (agent).
    G.

  • I can't sign in to imessages and face time with my apple ID, how i can fix it ?

    I can't sign in to imessages and face time with my apple ID, how i can fix it ?

    Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
    If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have an iPhone 4 and getting a iPod touch for my child, my question is whether to create separate account or have a shared account? I want to share some music and apps but not all and I also want her to be able to iMessage and face time with her owniPod

    I have an iPhone 4 and getting a iPod touch for my child, my question is whether to create separate account or have a shared account? I want to share some music and apps but not all and I also want her to be able to iMessage and face time with her own iPod and own account .   What's the best way to go?

    You can use one Apple ID for purchasing (App Store & iTunes Store) and shared with your child whereas your child uses a different Apple ID for Game Center, e-mail, FaceTime, iMessage. Even on iCloud there you'll get an extra 5GB free. 

  • Setting up time capsule with existing wireless router and another time capsule

    Hello,
    I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
    Is this true?? I find it hard to believe this issue hasn;t come up before.
    Thanks,
    Deborah

    Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
    Would I need to connect my time capsule directly to the router for first time set up?
    If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
    Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
    I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
    Thanks, I really appreciate your help!
    Deborah

  • Delivery date and transit time

    Hello,
    we have such a problem that we want to model vendor delivery transportation time in Purchase order and also in MRP run.
    That is, vendor confirms delivery date, but that date is that when goods are at vendor premises ready for delivery.
    So there is several days delivery time in between until goods are really in our premises.
    And our planner orders transportation from third-party and only then we know what is the real delivery date.
    SAP's Planned delivery time contains both (making of goods by vendor and transport) and thus it not suitable for our purposes due the fact that vendor is not responsible for transportation.
    Could you help and tell is it somehow possible to set transit time separately to purchase order? So that we have delivery date for vendor and another delivery date for transportation and that date is relevant for materials planning??
    In that way we could plan our purchasing more accurately.
    Thank you in advance.
    -Juha

    Hi Juha,
    Do you use Routes (Transaction 0VTC)?  If so - you can specify a 'Transit Duration' value on the Route.
    Routes link 'Transporation Zones'.  So for example if your Third-Party Logistics provider belongs to 'Transportaion Zone' A and your ordering Plant belongs to 'Transportation Zone' B - then you can have a Route A <-> B with a Transit Duration Value maintained on it.
    This may be a possibility given the specifics of your scenario.
    Hope this helps.
    Ravelle

  • External Location Ship Method and Transit Time

    Hi
    I have got scenario -
    1: Primary Suppliers are in APAC region.
    2: They send the units to a site for consolidation
    3: Based on the receiving site, east coast or west coast the lead time is different
    4: If I cannot place orders to these suppliers then I can place order with local supplier and then the lead time is different
    Now I have modeler following -
    1: The lead time between supplier and consolidation site is in the Processing LT at ASL Level
    Now the issue comes in replicating the lead time between consolidation site and the receiving site.
    I can put this in Post Processing LT. But when I want to evaluate the local supplier, then the post processing LT kicks in which makes it even longer total time for local suppliers.
    I am evaluating to capture this in shipping method.
    But I am not finding any setup or document where I can setup Shipping Method and Lead Time between Supplier Site and Inventory Organization.
    I setup a location in inventory but this location is not appearing in the Inter-Company Transit Times. I am trying with 'Extenal Location' as source.
    Can you please help me on this?
    Regards

    Hi ,
    Please try using Plant and Ship To combination, I saw it does not work with Route and shipping point.
    Thanks,
    Pavan Verma

  • Route and Loading Time

    All Gurus:
    I am trying to create a route for a specific shipping point (one plant) where the loading time is different for every route.  I am looking at configuration for defining shipping point:
    IMG > Enterprise Structure > Definition > Logistics Execution > Define, copy, delete, check shipping point.  Under "Determine Times", there is "Determine load. times" and 4 options:
         No loading time determination
    A     Route dependent
    B     Route independent (Route '      ')
    C     Default from shipping point
    If select "C" and specify 11 days for "Loading Time with Days", the system will always have 11 days defaulting on the sales order schedule lines between the "Loading Date" and the "Goods Issue Date".
    What I need is to have more flexibility as to the number of days on the Loading time.  If I select A or B, can you please let me know what that would do and where I can configure it so that the system gives me more flexibility as to the number of Loading Days?
    Thanks in advance,
    Ta

    Tal -
    When the loading date and GI date is same you can change the GI date by adding number of days in the field "TransLdTm". This time will get calulated as loading time. In each route definition this may vary according to requirement. this will give you different transit time determination for single ship point.                         
    In configuration do setting as below e.g.
    TransitTime               10
    Trav.dur.                    
    TransLdTm.               1
    TrLeadTimeHrs            
    With this system will calculate in reverse way from delivery date to customer based on route transit time.
    Material availability date + loading time (1) + transit time (10) ... this will be the calculation.
    Hope this answers your question. Let me know anything else you require on this.
    Regards
    Amol

  • Promised Date Calculation based on Need by Date and Transit Time

    Hi,
    I have created PO with NBD as D25 (Day 25) and approved it. This means that i need the goods to be at my premisis by D25.
    Now the requirement is
    Promised date in my PO should be calculated to D25 - Transit Time. So that supplier will be notified D25-Transit time.
    Or Is there any workaround to overcome this.
    Thanks,
    Jey

    Jey-SCMFG wrote:
    Hi,
    I have created PO with NBD as D25 (Day 25) and approved it. This means that i need the goods to be at my premisis by D25.
    Now the requirement is
    Promised date in my PO should be calculated to D25 - Transit Time. So that supplier will be notified D25-Transit time.
    Or Is there any workaround to overcome this.
    Thanks,
    JeyHi Jey,
    Where you are capturing your lead time. You can do it in item master.
    Once it is there, write a personalization to calculate the promised date and update the field.
    Thanks,
    PS.

  • How if i have 5 different router and 1 Time Capsule in my big house? and 3 device want to use it at same time ?

    I have big house with 5 routers in every corner. The question is can it work ? like i have brother laser print, it cannot work properly, why i said that ? because i cannot print from other router. How about this Time Capsule ? how if my brother, my sister and me want to connect to Time Capsule at the same time using different router (every router of course connected with 1 Lan wired and i connected Time Capsule with one of it). So please help the answer please or any experience people with this issue ?

    The routers are must be bridged .. all except one.. the one router to rule them all and in the darkness bind them.
    All the other routers should be bridge or in what we call wan bypass. That means you plug into the LAN port.. bypassing the WAN routing facility.. setting the DHCP to off and setting a fixed IP on all router.
    So .. main router 192.168.1.1
    All other routers take fixed ip. 192.168.1.2 etc.
    They all have dhcp turned off.
    So they are all on the same network.. they all have different names and different IPs.. but the one router has dhcp on, and all IP in the network are controlled from that single router.
    The TC offers bridge mode.. which does the same thing as wan bypass.

  • PSP, router, and modem issues with Remote Play

    Background:
    Verizon DSL
    Westell 6100 modem
    WRK54G router
    PS3
    PSP
    I haven't seen a post on this topic yet, so I'll explain the issue.  The Playstation 3 is networkable either through a wired ethernet or wireless connection.  The Playstation Portable is also networkable over wifi.  The PSP has always worked at hot spots for web surfing and gaming.  With the release of the PS3, there was a new feature called Remote Play, which let you connect your PSP to your PS3 and stream the PS3 interface.  You can manipulate the options, watch videos and listen to music, just like you are at the controls of the PS3.  The PS3 has to be put in "remote play" mode for this to work.
    Last week, Sony released an update that made this functionality work over the internet.  For most people this worked just fine.  Others had to open ports here or there, but there is a group of users that cannot connect from a hot spot, but can connect over the internet at home.  The original remote play connection (before the update) was a direct connection between the PS3 and PSP.  Now you can connect through your router at home (scan for your router and connect that way).  This connection works since the PS3 and PSP are both connected to the same router in your home.  When you go to a hotspot, you can get all the way up to the point that the PS3 streamed screen should start, but it times out.
    This is taken directly from the PS3 owner's manual:
    "If the PS3 system is connected to the Internet via two or more routers, communication may not work correctly."
    It seems like internet connection from a hot spot doesn't work because the request for the PS3 gets lost between two routers when it gets to my home network.
    Finally to my question.  It seems like my Westell 6100 is functioning as a router, as is my WRK54G.  When i look at my modem's settings, it is set up as a bridge protocol in routed bridge mode.  Everything else I try makes me lose my internet connection.
    Anybody know what I'm talking about or have any suggestions?
    Thanks

    A lot of PS3/PSP owners are having this issue with Remote Play. I have a WRT350N and have been through Sony forum as well as this one to know about all setups from port forwarding to giving your PS3 a static IP and placing in DMZ. I can say I had success connected via or public wi-fi but I also noticed how unstable Remote Play is. There will be times you can connect to it but if you turn your PS3 completely off (not standby) and back on you will pretty much need to setup your PSP again with the PS3 for Remote Play. The problem itself lies more with Sony and not our modem and routers except that fact that you do have to make some minor changes like disable UPnP, forward ports and etc. I own the Sony LocationFree Player which uses a similiar function like Remote Play but instead gives you control over your cable tv remotely anywhere on laptop or psp. LocationFree never failed me since day one because Sony created a DDNS for it which worked for me no matter who my carrier was or what router I have used over the years. Remote Play was introduced later for PS3 which pretty much like LocationFree but Sony doesn't provide a DDNS for it, instead we have to go through all the crazy configurations which is never stable. However you can register for a DDNS at DynDNS.org and configure your router with it which I have done before and found it to be very stable. No matter what Sony still needs to address the issue with the PS3 communication for Remote Play. You can find a lot of info here for setting up DDNS and as for Remote Play your better off going to the Playstation Forums. Good Luck!

  • Transportation Lead Time and Transit time

    Hi All,
    How to calculate the transportation lead time and the transit time from the delivery document in SAP. Please clarify me.
    Regards
    Srikkanth

    Dear Srikkanth,
    [How to calculate Lead Time|lead time]
    Also refer:
    [Scheduling|http://www.sap-img.com/sap-sd/backward-and-forward-scheduling-in-sap-sd.htm]
    [Scheduling - |http://www.sap-basis-abap.com/sd/what-is-forward-and-backward-scheduling.htm]
    Best Regards,
    Amit
    Note: Path
    SPRO --> IMG --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Scheduling --> Delivery and Tranportation Scheduling --> Maintain Duration

  • I just can't to connect to the I message and face time with my Apple ID

    I just can't connect to the I message and the face time with my Apple ID in my iPad and my iPhone

    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

Maybe you are looking for