Routine error 9006 Forcing me to Reboot to Bring iTunes7 Back Up

I routinely get error 9006 since "upgrading" to iTunes7.
Not only does this stop the downloading process, but, after getting this error I close iTunes and try to bring it back up again -- but it will not come back up without a reboot. And, when I try to shut the computer down for the reboot, there is one program that can't close itself and has to be ended manually. I don't know what this program is since it just shows what look like Chinese letters where the program name would be.
I am using dial-up and thought that was the problem but I see here it isn't limited to dial-up.
This has happened when I am only downloading one TV episode at a time and when I am letting 2 or 3 download at the same time. Since the other downloads continue, I am not losing connection -- except, when this happens once a file has reached processing stage. When it fails then, I think it may be freezing the other downloads (not sure about this).
Am I the only one that has to reboot to bring iTunes7 back up after this error? (The error doesn't shut iTunes down -- I do that manually -- but, after doing so, it won't come back up again without a reboot.)

Welcome to the Apple Forum.
Re-start the first backup again over the wired ethernet. It would be much faster and more reliable than wireless. Once the first backup is complete, you can then switch to wireless for the hourly backups.

Similar Messages

  • Am getting Routine error  R6034. I can not open iTunes.  Windows Vista Home  64 bit

    For the  first time,am getting a routine error R6034. Do not let open my iTunes, and possible lost all my contents. Why is this happening, is it nothing  secure on the Internet no more even our music? Please  I appreaciate any good help. I tried to redownload am stil the same  message. During reinstallation.."Service Apple mobile device failed to start. Verify that you have sufficient privileges. Options   ABORT,RETRY,OR IGNORE. That is what am getting.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Update IOS 7.0.4 Network Error 9006

    I just update my iphone to IOS 7.0.4 but i facing trouble with it. During processing file, it keep pop out says my network error 9006 and whole thing just stoped. I have already tried lots of time but it could not work. i also have tried deauthorise, signing out, rebooting iphone and switching it off but all do not work. My iphone keep ask me to connect it to the itunes. i do not what to do. please help ..urgent =(

    Hello LittleZai,
    Thank you for the details of the issue you are experiencing with your iPhone.  Follow these steps when getting Error 9006:
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    You can find the full article here:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694?viewlocale=en_US#9006
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS3694 Need help for ipad 3 download error 9006

    Have downloaded Itunes app and iphone5 IOS 7 successfully.
    Have installed IOS7 on Iphone 5 it works great.
    After Iphone successful install I moved to my Ipad 3.
    I get download error 9006 when connecting Ipad 3 in middle of the download.
    I have rebooted both Windows7 and Ipad3.
    I have tried 3 times. I get the error.

    Launch iTunes on your computer and see if you have available downloads. After you open iTunes, click on the apps tab on the left side under the Library heading. You will see a window with all of the apps that you have purchased. If there is a number next to the word apps - say the number 2 - that means you have available downloads. Look in the bottom right corner of the iTunes window and there should be a message sating 2 downloads available. Click on that to get to the next window and you may be able to finish downloading the stuck apps in there.
    Do this first and then worry about deleting the apps from the iPad. I want you to see if you can finish downloading them in iTunes on your computer - then sync - then delete.
    This is step one.

  • I keep getting the error message 'error 9006' when i try to update my iphone and ipad with iOS 6.1.2 - HELP

    Can any one help me.
    I'm having an continued issue with my phone/ipad 2 and updating it.
    I've tried (unsuccessfully) 7 or 8 times to update my iphone 4s with the latest update (iOS 6.1.2) but it gets 30 minutes in to the update and then an error message comes up (error 9006) and it gives me no option but to click ok and it.
    I've tried using different USB cables, different ports in my laptop, even uninstalling I Tunes and reinstalling and starting again - nothing seems to work.
    I've contacted my network provider who's referred me to Apple but they are closed (I'll try again during business hours).
    I'm updating it on my laptop using an internet dongle (as i dont have WIFI - All updates have been done like this and i've never had a problem before) and I have windows 7 software..
    Is there anyone who's encountered the same issue?
    Any suggestions would be greatly appriciated?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This hass been going on for several months, and Apple has never contacted

    I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

    I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

  • Start routine errors while activating transformations 2LIS_13_VDITM

    Hi Friends,
    I have an error while activating transformation for Cube: 0SD_C03
    Transformation Z2LIS_13_VDITM
    The start routine error is like this->
    Start Routine: Syntax error in routine
    Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
    S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
    Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
    Key rule 43 (target field: 0VERSION): Initial update set
    pls guys if some one can suggest me to solve this i would be very greateful
    Bala
    Edited by: bala dondeti on Jun 20, 2011 12:32 PM
    Edited by: bala dondeti on Jun 20, 2011 12:43 PM

    Thanks for the info Umesh,
    Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
    METHODS
          start_routine
            IMPORTING
              request                  type rsrequest
              datapackid               type rsdatapid
            EXPORTING
              monitor                  type rstr_ty_t_monitors
            CHANGING
              SOURCE_PACKAGE              type tyt_SC_1
            RAISING
              cx_rsrout_abort.
    and then after that in:
    Migrated update rule call
      Perform routine_9998
      TABLES
        SOURCE_PACKAGE
      CHANGING
        l_abort.
    Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
    Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
    BR,
    Alek

  • ERROR 9006 can not update iPhone 4

    I have a iPhone 4 on iOS 5.1 and when i try updating or even restoring to iOS 5.1.1
    i get an ERROR 9006 about 40 - 60mb into the download i have tried maybe 4-6 times
    and cannot get it to work any one else have this problem and able to over-come it.

    To  TJohnson93
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    Why Jailbreak is Not Supported
    http://support.apple.com/kb/HT3743

  • Ipod nano 6G error 9006

    After several months I found my Ipod Nano again. In the meanwhile, I switched from Android to Iphone 5s and got quite common with ITunes.
    ITunes does find the Ipod, but states, that he is in "maintenance mode" and needs to be restored by ITunes - done so, updated ITunes to newest version, IPhone works well, but when downloading newest IPod Nano software, at the end of the 4-5 minutes download I receive error message "unkown error 9006".
    I've presed power button together with vol - also for x-times, but unsucessful.
    Is there any hint I haven't been able to find via google??
    Please advise

    That one can indicate a security software issue. In the course of your troubleshooting to date, have you worked through the following document?
    Resolve issues between iTunes and security software

  • When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.

    When updating my iPod Nano, I get the error message: Unknown Error 9006.  Any help is appreciated. 

    See this
    http://support.apple.com/kb/TS3694#9006

  • I am getting Error = 9006 when downloading some Podcasts

    I am getting Error = 9006 when downloading a podcast, Derb Radio on TakiMag, but not other podcasts.  It started occurring recently, about 3 of the last 4. This occurs on both a Windows and Apple machine.  iTunes is updated.  It does not occur with other podcasts.  Then end result is that the podcast does not download.
    I also get a "rebuffering stream" interruption during playback on the computer.

    Hello there, johnsilker.
    The following Knowledge Base article references some great information in regard to the very error you're seeing:
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694#9006
    Particularly:
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Iphone 4 new update can I update this new update thru ITunes the headlines say wifi and do not have wifi. I would like to do it from ITunes? When I tried last night I tried to do it it was almost done and then got an error 9006.Any one know what this is

    I tried to update my IPhone 4 last night thru ITunes and got and error when almose done 9006. It says in the nes that you have to do it thru wifi but do not have wifi and so I synced it with my computer and said I have the new update down now and selected yes and it startedto do it then stopped 3 times with error 9006? Do I have to restore the phone to do this new up date? Here is the link I saw on yahoo. Upgrade to IOS 7.1
    http://news.yahoo.com/ios-7-1-upgrade-iphone-210049155.html

    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Resolve specific iTunes update and restore errors - Support - Apple

  • Error while starting oms after reboot

    Hi All,
    I am receiving the error while restarting OMS after rebooting the server. Any help would be appreciated.
    Ping statistics for ::1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>ping xyz02srv141
    Pinging xyz02srv141.abc.com [::1] with 32 bytes of data:
    Reply from ::1: time<1ms
    Reply from ::1: time<1ms
    Reply from ::1: time<1ms
    Reply from ::1: time<1ms
    Ping statistics for ::1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>nslookup 10.12.2.141
    Server:  tatnet200.abc.com
    Address:  10.10.2.200
    Name:    xyz02srv141.abc.com
    Address:  10.12.2.141
    C:\Windows\system32>nslookup xyz02srv141.abc.com
    Server:  tatnet200.abc.com
    Address:  10.10.2.200
    Name:    xyz02srv141.abc.com
    Address:  10.12.2.141
    C:\Windows\system32>nslookup xyz02srv141
    Server:  tatnet200.abc.com
    Address:  10.10.2.200
    Name:    xyz02srv141.abc.com
    Address:  10.12.2.141
    C:\Windows\system32>echo %ORACLE_UNQNAME%
    ORACC
    C:\Windows\system32>emctl stop oms -all
    EM Configuration issue. D:\app\s_oracle_xyz02srv141\product\11.2.0\dbhome_2/xyz02srv141.abc.com_ORACC not found.
    C:\Windows\system32>
    Regards,

    C:\Windows\system32>emctl stop oms -all
    EM Configuration issue. D:\app\s_oracle_xyz02srv141\product\11.2.0\dbhome_2/xyz02srv141.abc.com_ORACC not found.
    Hi,
    Please check the path of command emctl. The above emctl command is for Grid/Cloud Control. The output indicates that 'emctl' for database control was executed.
    Regards,
    - Loc

  • Download error 9006, internet intermittent.

    download error 9006.  internet intermittent. Tthis is normal for where we live, it just drops for a second and everytime it drops you have to start over with the download, is there a way to pickup where it dropped off?

    traffic shaping prioritises "core" services, so web browsing and email are not affected.
    P2P traffic and video sharing/downloading are the services that are often throttled (sometimes to the point where it's not usable).
    all ISPs do this (even the ones that say they don't).
    Sky's broadband services all do this expect for the 16MB Max LLU package which has no throttling or download limits (the 8MB services has shaping during peak times and a 40GB a month usage limit).
    apple have no control over this and will give an error message that is relevant to the problem in question (ie problem downloading the file). it has no control over what throttling an ISP is doing and is unable to tell if throttling is the issue or not.

  • I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

    I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

    Download a free app and try again, you can delete the free app afterward.

Maybe you are looking for

  • Getting the item name in the pricing procedure

    Hello Experts, I am working in VMC Pricing exits for CRM 5. I am writing the java pricing user-exit in which i am trying to find the name of item on which the exit is called. I tried methods of pricingItem like getId(), getExternalId etc but none of

  • Macbook Pro won't sleep with lid closed problem sorted!

    I have experienced and read about many other people having the problem of not being able to put the macbook to sleep propery, and opening your bag to find it is boiling hot and still awake... i have tried all of the solutions posted on this forum suc

  • Why does my TV screen say "no signal!"?

    Hello! I've been enjoying apple TV for months now and for some reason this morning it stopped working. I unplugged and restarted the black box, (the solid white llight is on making me think the apple tv box is not the problem). I made sure everything

  • %pdf error in downloading pdf from Function module

    Hi, I am trying to download pdf from a LinkToaction UI element. I recieve %pdf" error when trying to download using below code. from backend perspective ABAPer said they are able to download PDF from ABAP program. Lokks like I am doing some mistake s

  • Is it possible to set screen saver to iphoto library on another computer?

    I have all my photos on an iMac; I have a mac mini connected to my flat screen tv which we use to watch movies (netflix, amazon video, itunes, etc).  I would like to set my mac mini screen saver to the iPhoto library located on my iMac.  Is this poss