Routine error in Trasport selection
Hi All,
I have a question with regard to transports. I am transporting info objects where i am getting this error wrt to a transport request which has 170 info objects.
The error message has two errors.
(1) <b>" Object '45EX1L0TIWA4LUWZHUIKRNOCF' (ROUT) of type 'Routine' is not available in version 'A "</b>.
(2). <b>" Object '45EX3Q1RNVZ0DVY20BZPLCSU7' (ROUT) of type 'Routine' is not available in version 'A "</b>.
Can anyone please tell me how to find out that particular routine, so that i can go and look into that and do the necessary.
I moved out that particular info object from the selected list thinking it might solve my problem, but the very next object is giving the same error message. So far i have removed 6 objects in succession and the same error message is repeating for every info object. The strange thing which i have observed is that the Routine object num is not changing and the same error messages are popping.
I checked the "routine" option in transport connection and Business content as well.It says that Input help for Routines in not yet available.
Please reply asap as i am in middle of a critical requirement.
Thanks and Regards,
Sudeep Moka.
Hi Sudeep
It seems that some of your routines are not active. Not very sure but you may try this option. find the inactive routine in table RSTRAN with the object string given in your post.
identify the routine/object and activate.
Thanks
Tripple k
Similar Messages
-
Am getting Routine error R6034. I can not open iTunes. Windows Vista Home 64 bit
For the first time,am getting a routine error R6034. Do not let open my iTunes, and possible lost all my contents. Why is this happening, is it nothing secure on the Internet no more even our music? Please I appreaciate any good help. I tried to redownload am stil the same message. During reinstallation.."Service Apple mobile device failed to start. Verify that you have sufficient privileges. Options ABORT,RETRY,OR IGNORE. That is what am getting.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
COM routine error in Background job.
Hello All,
During background process of a job, we found a "Error for COM routine using application program (return code 40.301)" for a CVC. It caused a backgroung job to fail.
Could you please throw light, why this error comes only for this CVC ( as had the same instance before for the same CVC ) & how to fix it ?
Reagrds
Rahul ChitteHI Rahul,
COM routine errors are generally related to LC errors. There are a number of possible causes for it, the CVC was created when a macro was running or it was deleted from MPOS but not from LC etc etc.,
Solution to this is go /n/sapapo/msdp_admin --> Go to your planning area --> Double Click --> Look for Extras in Menu --> Go to Consistency check and do a time series consistency check.
Remember to click Check for Live Cache Anchor and leave 'Repair' unselected.
This will return what is the error. Once you see the error, you can go back and select the 'Repair' Also and then execute again. This should resolve the problem.
Hope this is helpful.
Thanks
Mani Suresh -
Hi Any one can explain the reason for Com Routine Error 40.075.
Description:
Error for COM routine using application program (return code 40.075)
All input time series to which you can distribute are fixed
And Please provide the solution also.
Thanks and Regards,
RAVI SAGAR CHENNUProcedure
Remove at least one of the fixings of the aggregated time series
objects.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
You have fixed information in your planning area, which is causing the
issue to occurs.
So in tscube, if you try and load data into a key figure which has
at least one value fixed, the load will fail, if your selection criteria
in tscube overlaps with the aggregate level of the fixing. The reason is
because, tscube does the data set in one shot for the selection criteria
If your cube is a backup cube and you already have the fixing
information in it, you can use macro to unfix the fixing information in
the planning area, then use tscube to load.
Before executing the TSCUBE,you can schedule this macro job and then
execute the TSCUBE.while defining the macro you can check whether
the keyfigure value is fixed or not using the macro function
IS_FIXED(). If it's fixed then please unfix the cell.
You have fixed information in your planning area, which is causing the
issue to occurs.
To run the macro considering fixings, please, update your macro. Change
the Row properties and flag the "Adjust Fixings" information for each
row.
Also please find the below notes related to fixings:
1599645
687074 Macros: General notes on fixing with macros
643517 Macrobuilder: Fixing key figures with a macro
Even that these notes do not apply because of the SP, information is
relevant.
Also, please, take a look at the online documentation:
http://help.sap.com/saphelp_scm50/helpdata/en/92/cd15426bf3dd2ce10000000
a1550b0/frameset.htm -
Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? ThanksTry
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources. -
I have several disks with many comedy routines;I want to select a few from each disk to make one single disk for my personal use.How?
Copy the routines into a new folder on your hard drive. Then burn the folder to a new blank disc using Disk Utility.
-
Error Message in selection screen Status bar is getting truncated
Hi Guys,
Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove thisHi
Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
What you can do this split 50 and 50 like that you can give 200 chnars.
Data : Text1 type char50
Text2 type char50
If sy-surc ne 0.
Message Text1 Text2 TYPE "E'' or 'S'
endif. -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Error msg, "Maximum selection does not contain value 9999999999.
Hi, I am getting this error wile doing Reclassification of HFM Movement.
Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "
in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009
Actually, We have converted the consolidation area from XX(2009) to YY(2010).
Before this task, user has performed the balance carry forward.
My Analysis is as follows:-
Method Used in this Reclassification
RECYX (Reclassify HFM Movement at YE lvl 10)
TRIGGER
Items : 100-299, 9900-9999
HFM Movement Type : O200 to O300
Posting Level : 10
TARGET
Items : 100-299, 9900-9999
Move : O100C
Posting Level : 10
HFM CD2 and Asset type : Ticked
After TEST run in UCMON, the error message comes :-
The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700 etc.
Breakdown categories in Workbench
Maintained as "OPTIONAL, Initialized value allowed".
Single Selection
1A
1B
AR
GA
Default Selection
99999999999
BCS CUBE
HFM CD2 & Asset Type - coming blank
LOTR
HFM CD2 & Asset Type - Coming blank
Please help to go forward.
In Anticipation,
Deepankar JainThanks a lot Dan for the reply.
Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type" is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
Please correct me if I am wrong.
Your replies on it are highly appreciated.
Thanks and Regards,
Deepankar -
Error joining the selected airport network?
I'm trying to connect to my linksys wireless using WPA with a powerbook but no luck. My password which I know is correct (it's working on another G4 and my wife's Gateway. I get the following message when selected my network. "There was an error joining the selected airport network". I can connect via a neighbor's unprotected network, so airport is working. Other times I've tried it says password is incorrect.
Wi-Fi Protected Access networks normally require a plain-text password or passphrase. But in rare cases you may have to enter a string of 64 delightful hexadecimal characters.
The HEX password is derived from the plaintext password therefore you shouldn't need to create anything new. Check the linksys router for the HEX version of your plaintext password.
The AirPort interface doesn't welcome this wonderful practice by default (imagine that), but it's buried in there for when you need it. Just hold down the Option key while choosing your network from the AirPort menu, then you'll be set to enter all 64 of those easy-to-remember characters.
iFelix -
Getting an error in this select
Hi,
i am getting an error on this select
select add_months(to_date('31-MAR-'||'to_char(to_date('31-MAR-2011')','YYYY'))-12) from dual
Kindly help !!!Your format-codes are wrong and sometimes missing.
Please try this:
select add_months(to_date('31-MAR-'||to_char( to_date('31-MAR-2011','DD-MON-YYYY'),'YYYY'),'DD-MON-YYYY'),-12) from dual;I did correct it, but it is not nice code. Why do you use the same constant value (31-MAR) twice? The second is only for extracting the year. You could do the same with this:
select add_months(to_date('31-MAR-2011','DD-MON-YYYY'),-12) from dual;Keep in mind: There is a dependency of the setting of NLS_DATE_LANGUAGE in this code. NLS_DATE_LANGUAGE should be english for you code.
For example if NLS_DATE_LANGUAGE is GERMAN the code for march will be 'MRZ' instead of 'MAR'.
The following code would be language independent:
select add_months(to_date('31-03-2011','DD-MM-YYYY'),-12) from dual;Edited by: hm on 11.09.2011 22:51 -
TIME-OUT error in BSAK select query(Progress Indicator is also used)
Hi,
In my report program one select query is there on BSAK table, which is as follows --
SELECT BUKRS
BELNR
GJAHR
SHKZG
BSCHL
UMSKZ
LIFNR
EBELN
EBELP
WRBTR
DMBTR
XZAHL
REBZG
AUGBL
BLART
AUFNR
AUGDT
BUZEI FROM BSAK
INTO TABLE IT_BSAK
FOR ALL ENTRIES IN IT_BKPF1
WHERE BUKRS = IT_BKPF1-BUKRS
AND AUGDT = IT_BKPF1-BUDAT
AND AUGBL = IT_BKPF1-BELNR
AND BSCHL IN ('31' , '29', '26', '39', '25').
I used Progress Indicator befor running this query and after this query also. But still It's giving me TIME-OUT error in this select query only.
I run the same query for 10 records in IT_BKPF1 table, it runs perfectly. But when I run it for 1000 records it giving dump.
And in actual bussiness my records are always more than 100 only.
I also check the indexing. It having secondary indexing on this BUKRS, AUGDT, AUGBL fields. Then also it's giving error.
so, How can I solve this dump..?? What could be the reason..??
Thanks in advance...!!
Regards,
Poonam.Hi Poonam Patil,
Try to provide BELNR and GJAHR in where condition...
BKPF-DBBLG ==> BSAK-BELNR
Also check
BKPF-BLDAT ==> BSAK-AUGDT
Check out above relation...
If data is there in these fields of the table and both are matching then you can pass it and as they are in primary key of BSAK it will improve the performance...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Cube to Cube "Error in data Selection" plz help
Hi this is Ajay Reddy
when am sending data from Cube to Cube am getting an error
"Error in data Selection" plz helpHi,
It needs a Note implementaion. I got similar problem in version BIW 7 and SP 11. We got the solution with on of the note . I am not able to recollect the note number.
Any way check the notes 920971,155471 may help you or not.
With rgds,
Anil Kumar Sharma .P -
Hi experts,
I have added a field to 0emp_attr data source using DS enhancements, when trying to extract with full the job is getting failed stating " error in data selection".Hi,
Just see following thing
1. Try to extract data in R/3 in RSA3 transaction.If it is working correctly no issue
2. If RSA3 throw issue check the definition of your code and try to debug it.
3. If RSA3 is fine check your Infopackage selection settings if it is ok or there is any error,If there is any selection try to remove it and load data.
Thanks and regards -
"Error in data selection" while loading
hi,
while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"
i saw its help messages were
1)error 7 when sending an idoc
2)sql error in accessing table no 13
3)error in source system
in the source ods i have loaded thru init from R/3..
please helpHi,
Take a look on the cosulting note : 610938.
In place of R/3 system you have to consider BW itself when you are reading the note.
With rgds,
Anil Kumar Sharma .P
Maybe you are looking for
-
Calling a method from a method
I'm having a big issue getting the method I am calling to use previously called 'programs' (for my lack of knowing the proper word. The myTurtle draws shapes as can be seen, after browsing the internet it appears to be a common learning mechanism. I'
-
Sudden problem getting CD-LabelPrint to work with Canon ip5200R
The last time I successfully printed a disc label on my Canon ip5200R was in November last year - until then, I'd had no problems printing from a couple of different iMacs & my MacBook Air. I have recently tried to print a new label, but am receiving
-
Help:after amber update,Camera shut down....
just after update to amber,my 920's camera never turn on, shut down when i turn it on.......what can i do? before amber it's ok..
-
Hi, This must be a windows or java bug. My application works fine, but from time to time when I open a AWT FRAME it FREEZES... (not the application but the frame) I cannot click anywhere with the mouse, i cannot close it, and it does not show up in t
-
Java.lang.stackoverflow error
Hi All, I am getting the following error Exception in thread "main" java.lang.StackOverflowError at java.util.ArrayList.<init>(Unknown Source) at com.migration.wcm.vigneete.InitializeCls.<init>(InitializeCls.java:12) at com.migration.w