Routine FDPREP cannot read the file e:\oracle\testappl\per\11.5.0\reports\
Dear all
I am trying to make XMLP report. When I try to run the request it gives me this error,
Any help on this...
Hi,
Hi there is no APXAECTR.rdf in the directory, how can i download or install this in my server?I believe I have explained this in my previous reply.
If you have a backup or any other identical instance, just restore/copy the file.
If this is the only instance you have, run adadmin and generate the report (select "Generate reports files" option from adadmin).
For details about adadmin, please refer to:
Oracle Applications Maintenance Procedures
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admp.pdf
Thanks,
Hussein
Similar Messages
-
Routine FDPREP cannot read the file APXAECTR.rep
When i tried to generate report from AP, i found this error
Routine FDPREP cannot read the file /d01/oracle/SVIPROD/apps/apps_st/appl/ap/12.0.0/reports/US/APXAECTR.rep.
as i checked the specified directory, the file was not there.
Where to get the file?
Please advise
ThanksHi,
Hi there is no APXAECTR.rdf in the directory, how can i download or install this in my server?I believe I have explained this in my previous reply.
If you have a backup or any other identical instance, just restore/copy the file.
If this is the only instance you have, run adadmin and generate the report (select "Generate reports files" option from adadmin).
For details about adadmin, please refer to:
Oracle Applications Maintenance Procedures
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admp.pdf
Thanks,
Hussein -
Custom reports do not run with error message: Routine FDPREP cannot read ..
Hi
Can anybody help me with this issue pls?
The dev system is cloned from production a few days ago. After running the post clone procedure, the dev is working fine except when we are trying to run custom reports, it errorred out with error message - Routine FDPREP cannot read the file /fmis/11.5.0/reports/US/POXPRPO1.rep. I have checked the env files, and they seem ok. $CUSTOM_TOP is set to the correct value. Other standard Oracle reports are running properly. The custom report file extension is in low case (.rdf). I've even tried to compile the report manually by using rwcon60.sh, the rep file was created under that folder but concurrent manager is still giving the same error message. So I am suspecting whther it is the path issue, as from the error message we can see up there, it is not showing the absolute path. Can anyone pls shed some lights on this for me?
Thanks!
LiangHi hsawwan,
Echo $FMIS_TOP(Custom Top) returns /global/app/fdev/home/fdevapp/findevappl/fmis/11.5.0, which is the correct path.
Interesting thing is I checked the custom forms and they are working properly , our current configuration is form server and web server are sitting on one node, and CM, admin and database are sitting on the other node. So it seems it is the CM node settings caused the problem. However, I've just compared the APPSORA.env, customfindev_XXXXXX.env $FMIS_TOP (Custom Top) on the two nodes, and nothing seems out of ordinary.
Thanks,
Liang -
When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!
hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I am trying to record something on my desktop and I recorded it with an application called iscreen recorder lite. I downloaded it off of the application store thinking it would save under a file my computer would recognize. When I tried to play the recording back again, my computer tells me it cannot read the file and I should see if the formatting is right. I checked and the file is under .mov which should be supported by mac. Please help!
I have this exact same problem, only on Snow Leopard. What's the right answer?
Thanks, Mark -
APP-FND-00676: The flexfield routine FDFGDC cannot read the default ref....
Hi Guys
Please help me, I'm desperate. I'm trying to enter a new Lease in Properties Module. In the payments tab, when I try to save a line I get the following error:
APP-FND-00676: The flexfield routine FDFGDC cannot read the default reference field specified for this descriptive flexfield. The developer specified a context field (via the Register Descriptive Flexfields form) that does not exist in this block of this form.
Action: Contact your system administrator, and choose another default reference field for this descriptive flexfield.
I've got an idea that it's complaining about a Flexfield, but I don't know which one and I don't know how to resolve this error. Any ideas would be appreciated.
Thank you
RegardsHi Octavio
I did see the hints on Metalink and I looked at them. In principle I do understand what they are saying on the hints. My problem is that I can't find any hints on Property Manager, which is where I'm getting this error. And my other big problem is that I don't know which Flexfield is causing the error. So even if I follow the hints from Metalink, it's still not working because I could be looking at the wrong flexfield.
Thanks a lot. -
An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
Ashish GoelAshish,
You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead. -
41810-error creating the menu,cannot read the file
While creating the menu i am getting the following error
"41810-error creating the menu,cannot read the file".PLease help to rectify this error.It is probably attached to the Forms module (see the library node in the navigator window).
In a general way, try to know where are youe design modules (*.pll, *.mmb, *.fmb), look at the FORMS_PATH variable to see what directories are part of this environment variable, compile every design time module to get the executable versions *.plx, *.mmx and *.fmx, then put these executable files in one of the directories pointed by the FORMS_PATH variable.
Francois -
Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera that shoots .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?
Thnx again for the reply. The version of Lightroom I have is 4.0 (working w/Windows 7) This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun. Where does this folder go?
And will this set up work with my version of Lightroom?
What a pain. Makes me wanna go back to shooting .nef files for all stills
Thnx -
"The process cannot access the file ..." occurs when export crystal report
We are using a web application developed in VS 2005, .NET 2.0 with the bundled Crystal Reports version 10.2.3600.0 running on a Windows 2003 Standard server with 4GB Ram and Dual CPU's. Periodically we are still receiving the following error in our production environment:
InnerException:
The process cannot access the file because it is being used by another process.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
This is occuring at the point on the code where the report is being exported to a PDF. Exporting the report to Excel does not appear to cause the error.
Stream outStream = report.ExportToStream(ExportFormatType.PortableDocFormat);
byte[] charStream = new byte[outStream.Length];
outStream.Read(charStream, 0, (int)outStream.Length);
if ((charStream != null) && (charStream.Length > 0))
HttpContext.Current.Response.ContentType = "application/pdf";
HttpContext.Current.Response.OutputStream.Write(charStream, 0, charStream.Length);
HttpContext.Current.Response.End();
report.Close();
report.Dispose();
ds.Dispose();
GC.Collect();
Closing and disposing of the report and dataset (xsd) are followed by a call for garbage collection. We are unable to produce the error in our development environmennt and have not at this point been unable to pinpoint a problematic report. The development team members do have SP1 installed. The report limit has not been changed from the standard of 75 jobs. Reviewed the following document, Re: "The process cannot access the file ..." occurs when export crystal report However this applies to VS 2008. Any suggestions to resolve the issue would be greatly appreciated.
Thanks,
JoeGood morning Joe
For more details re. loading please see the following resources:
[Crystal Reports 2008 Component Engine Scalability|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412?quicklink=index&overridelayout=true]
[How Can I Optimize Scalability?|http://msdn.microsoft.com/en-us/library/ms225519.aspx]
[Choosing the Right Business Objects SDK for Your Needs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7]
To answer your questions:
Is it correct to presume that the physical number of CPU's is not factored into the CPL? So that a Server with 2 or more processors does not increase the 3 concurrent requests? Therefore 2 CPU's would not increase the CPL limit to 6 processes?
- Server with 2 or more processors does not increase the 3 concurrent requests.
What would be an alternate solution to this limit be, considering the report requests could increase significantly?
- Only way around this would be to web farm the solution
If only only 3 reports can be processed at the same time. If one or more of the reports currently processing is taking longer due to receiving large amounts of data, how does that affect the queue? And what is stored in the queue, data and/or the report? Is this something that could consume memory?
- The report can take as much time as it needs. The result is that one license will not be released until the report is done. There is no data stored, just a pointer to the report. However queued apps will chew up memory, some times to the point of the server becoming unresponsive
I have read in the documentation on this site, that the dataset sent to the engine is copied in memory during report construction. So if a large amount of data is requested for a report (as an example 10+ MB) Could enough users requesting reports drive the memory up because memory usage doubled due to the dataset?
- Absolutely. See [Crystal Reports Guide to ADO.NET|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20].
Understanding the the CR DLL's are loaded on the first report request, do they get released at some point time due to inactivity or garbage collection? How much memory usage could be consumed when they load and stay resident?
- No they do not. Not as long as the application is running.
Ludek -
Windows Vista cannot read the file in my ipod touch
I am using windows vista and I have 2 separate problems with my ipod touch:
1. Itune recognizes my ipod and all the songs that are on it but not the photos.
2. Windows cannot display the files that are on the device. When I go to my computer the ipod is not listed as one of the available drive.
What am I doing wrong?Hi Garry296,
I'm happy to assist you today, with your problem! Let's take it step by step...
Garry296 wrote:
1. Itune recognizes my ipod and all the songs that are on it but not the photos.
So you mean you can sync music, but not photos? How are you doing it? See if this articles helps you: http://docs.info.apple.com/article.html?path=iTunesMac/7.5/en/789x.html
Garry296 wrote:
2. Windows cannot display the files that are on the device. When I go to my computer the ipod is not listed as one of the available drive.
That's not a problem. It is just like that! iPod Touch and iPhone cannot be used as a Storage drive. Apple removed this feature from this devices.
Hope this helps!
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png! -
Cannot read image file in oracle 10g forms, getting error frm-47100
I'm unable to read the image from the file location. But If I do re-save via MS-Paint the same image then I'm able to load successfully. I want to load image directly instead of re-save. Error getting like "frm-47100 Cannot read image file".
Need your co-operation to solve this issue.
Thanks in advance!
declare
tiff_image_dir varchar2(80):=('D:\IMAGE\');
photo_filename varchar2(80);
begin
photo_filename:=tiff_image_dir||:IMAGE_NO||'.JPG';
if :image_no is null then
:Image_no :=:UID_NO;
end if;
read_image_file(photo_filename,'JPG','image');
WRITE_IMAGE_FILE('output.tif','TIFF','g_image_info.image',maximize_compression,original_depth)
end;Hi Sindhu,
By default any operating system file extension starts after the dot. So in this case when it says 2 dots it will think there is something wrong.
RajeshALex -
I checked the list of supportive cameras and the EM-1 is listed as having preliminary support. I checked for updates to LR5 and I have the latest version.
I checked the list of supportive cameras and the EM-1 is listed as having preliminary support. I checked for updates to LR5 and I have the latest version.
-
I have a Nikon P7700. I can download some of the images. The same set of images will not download so I can send 300dpi images for print. I am new to figuring this out. Please help?
Does your MacBook Air run a reasonably current Operating System (OS X 10.8.5 or later - the current version is 10.9.2)? Are you running a reasonably current version of iPhoto (9.4.3 or later - the current version is 9.5.1)?
If so, you can download this RAW compatibility update from mid-January. It supports your camera.
http://support.apple.com/kb/DL1717 -
ERROR: Final Cut cannot read the file just captured.
I get this message whenever I attempt to capture via DV NTSC using Capture Now.
I have used basic A/V, capture settings.
Please advise.Perhaps you are capturing to a drive not formatted as Mac OS Extended.
x
Maybe you are looking for
-
Removing Adobe imageready auto-process commands from Open With
Ever since installing photoshop cs2 with imageready cs2, whenever I go to open with> after right clicking on an image file, it gives me dozens of exe's such as "constrain to 64x64 pixels.exe" that I can open with file with. It makes the list so long
-
Hello. Im charging my ipod for like 40 min now... and still wont open, when i get lucky it only shows the low battery sign.. im so mad. can anyone help me?
-
Looking for tool like virus/worm simulator to verfiy/test working of different Signatures specially related to worm/virus
-
How can I change the default publish preview player from HTML to Flash in Adobe Flash CS5.5??
-
IChat AV 5.0.3 requires password every time I launch the program
Does anyone know why this is happening? After the recent 10.6.4 update, every time I launch iChat a dialog box pops up with my MobileMe account name, which has a check box next to it, and an input field below it which prompts me to type in my MobileM