Routine names in Transport Connection and Actual Routine names in Transform
Hi Experts,
We are working in BI7.0 environment. This is a fresh system and we finished with development and I am doing transports at the moment from Devp to Test system. I am seeing Routine names in Transport Connection but could not check the routine names in the Transformation rules. Routines were written by an ABAPer who is not here now.
How should I know the routine's name so that I can check/uncheck to transport the routines into Test System?
Thanks in Advance.
Best Regards,
Chandu.
It is resolved.
Thanks,
Chandu
Similar Messages
-
Regarding Transport Request and related program names
Hi All,
I have a issue with picking Pro<b>gram Names</b> from <b>Transport Request</b> names.
I am using <b>E071</b> table to pick up all the <b>Objects/Program Names</b> based on <b>TR's</b>.
But for the <b>TR's</b> which are having <b>D-Modifiable status</b> i am not getting any entries from <b>E071</b> table.
Can anybody give me alternate table which will give us All Program names under a T<b>R</b> based on T<b>R</b> for which status is <b>D</b>.
Thanks in advance.
Thanks,
Deep.Hi Deep,
When the transport request is not released (i.e it is in Modifiable status) all the objects are linked to the tasks under the transport request. So if you are trying to get all the objects in the transport request(in modifiable status), first you have to get all the tasks under the transport request and get the objects under each task from E071 table.
You can get the taskes under the transport request by selecting from E070 table
select * from E070 where STRKORR = <your transport request numer>
then you can get all the objects for each task .
- Kalyan -
Need help creating a script to read the name of a folder (which is the AD Username) and adding that name into the permissions of that folder.
I have over 100 folders which I need to add the AD user to read and write to their own folder
Hope you guys understand what I meanJust to add, Mac in intergrated into AD and all I need is help in creating the script
Thanks -
How do I change the 'Sent' folder to display the persons name I sent to and NOT my name?
Today BT Mail told me my BT Internet account had been migrated from the old Yahoo (defunct) account to their own new BT Mail. So I am using IMAP and therefore had to delete my account on my devices and set up again in order to continue to receive my mail.
I have duly followed their instructions and done this, and synced my calendar and contacts using their 'how to' web pages....
Now I am checking everything is ok.... and note that the 'Sent' folder now lists all the emails that I have sent under MY name. So if I'm looking for an email I sent to a particular person, I can't really, as all the emails are listed in my name. I have to open each one to find out who I sent the mail to. Very time wasting.
I have yet to update my iPhone with the same instructions - dialogue box currently stating 'cannot get mail' until I update the settings.... But I can see the 'sent' folder is showing sent emails in a list displaying the recipients' name... As it should do.
Question: How can I flip the display round to list the recipients' name in the sent list? I have looked but can't see how to do it. Thanks.Each account should have its own sent folder. Since mails may be sent from different accounts through different servers.
If you have moe than one account, and send mails from more than one of them then you will a sent folder for each account you sue to send emails from.
As to the names, it will show techncially the first recipient in the list or recipients iof there is mor ethan one. If that happens to be you then it will show you.
As to how to edit, there should be an edit link to the right of the original post.
For further posts the link appears at the bottom of the relevant post. This may not be visible if you are viewing the forum on the iPad only on a computer browser. -
Numbers: how do I turn on the feature that fills the cell with typing. In the previous versions, I could type a name or word and then a list of names/words with the same letters would appear. I could choose the name/word to enter into the cell. This saved many strokes. If I was typing a word with only one like it previously entered, that word would appear, grayed, and I could simply tab to the next cell, automatically entering that word in that cell. Is this feature in this version of Numbers? The autofill tab 1)I can't turn it on and 2) it doesn't seem to do the same thing.
Thanks.The developers failed to propagate that feature from version 2 to version 3. I believe it is on the short list of things to be restored in May 2014 or so.
Here's the full list as published by Apple:
Numbers
Customize toolbar
Improvements to zoom and window placement
Multi-column and range sort
Auto-complete text in cells
Page headers and footers
Improvements to AppleScript support
Jerry -
Can't see Update rules and infopackage in the transport connection
Hello, experts!
I need to transport newly created (and activated) update rules and infopackage from Dev to QA environment. When I open transport connection and select infosource, I don't see new update rules and infopackage. There are few update rules for different source systems in this infosource and I can see all of them in the transport connection except for this new one.
Your help is appreciated.
Thanks, Alina.in Transport connection please select ur higher level Object say Infocube...and collect data flow before then you will ur Update rules and IP
-
Cannot See Transfer Rules in Transport Connection
Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
NickBryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM -
File Adapter creating huge connections and not releasing.
Hi,
We see high no. of current connections in file adapter from weblogic console against eis/HAFileAdapter under deployments -> fileadapter -> monitoring -> Outbound Connection Pools and are concerned about the same. It seems like fileadapter is not releasing the connection and hence no. of connections are piling up over a days and depending upon the transactions. coz after a restart the values comes down from 36000 to 10 ( which is default initial connection).
But when i see at the datasource level i don't see that much number of active connections. Need to know why this is happening and is this behavior is expected?
We are using SOA 11g PS2
Below is the deployment plan for fileadpater in use:
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<value>oracle</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<value>eis/HAFileAdapter1</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<value>oracle</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<value>eis/HAFileAdapter_Wedb</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<value>oracle</value>
</variable>
</variable-definition>
<module-override>
<module-name>FileAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>/opt/soauser/products/soa11.1/Oracle_SOA1/soa/connectors/plan</config-root>
</deployment-plan>
-RohitHi Arik,
To answer your questions :
You are using HAFileAdapter in your processes JNDI defenitions? --Yes
Check in your HAFileAdapter Connection Pool if Shrinking Enabled is set to true. --Its set to true
I would recomend also to change the properties Test Connections On Reserve to true, and Test Frequency Seconds(900 is the default). --These properties are also in place
-Rohit -
Hi SAP Guys...
this is khaja...
can any one explain me the following one...
1.what is a Transport connection?.how do we collect the objects in Transport connection?.after collection how do keep into one request?.
Regrds.
khajaIn SE09 & SE10, under "Elements of the Query Builder" node, u can see the query names something like below, which is same as the technical name (not description) in Transport Connection..
4CXFEN58FRLEKDNDNG9AACM3I
4CXFENCWYQ74306TTABMKEKTA
In the Query Designer
tech. name : ZDZAS_MP01_Q101
Description : Number of Processes
But when comes to Transport Connection
Description : Number of Processes
tech. name : 4APUSIVVA4NN3QZK65YRJVROE
whatever tech.name in Transport Connection, that will apper in SE09 & SE10
Edited by: Mr. V on Mar 20, 2009 5:24 PM -
How to transport variants and scheduled background jobs
Hi all
Could anyone let me know if variants be transported .
also can scheduled background jobs transported.
Thanks in advanceHi,
Run the program RSTRANSP and give the name of the program and the variant name.
It will create a transport request for the variant.
the rest of the process is the same as is the case with all other transport requests.
Regards,
Raghu
Message was edited by:
Raghu Reddy -
Transport Connection of a Query
When I am in transport connection and choose my query, the characteristics and key figures are displayed. If I right click there are options:
Transport All Below
Do not Transport All Below
Add optional objects
Remove optional objects
What do these mean? ThanksHas to do with whether all related objects get transported along with the query, e.g. InfoCube, Update Rules, InfoObjects, Variables, etc. Normally, for a query, you would <b>not</b> want to transport the Infocube or InfoObjects. If you created new variable for the query, that would need to go.
Never used the Optional Objects. -
Shell Script to grep Job File name and Log File name from crontab -l
Hello,
I am new to shell scripting. I need to write a shell script where i can grep the name of file ie. .sh file and log file from crontab -l.
#51 18 * * * /home/oracle/refresh/refresh_ug634.sh > /home/oracle/refresh/refresh_ug634.sh.log 2>&1
#40 17 * * * /home/oracle/refresh/refresh_ux634.sh > /home/oracle/refresh/refresh_ux634.sh.log 2>&1
In crontab -l, there are many jobs, i need to grep job name like 'refresh_ug634.sh' and corresponding log name like 'refresh_ug634.sh.log '.
I am thinking of making a universal script that can grep job name, log name and hostname for one server.
Then, suppose i modify the refresh_ug634.sh script and call that universal script and echo those values when the script gets executed.
Please can anyone help.
All i need to do is have footer in all the scripts running in crontab in one server.
job file name
log file name
hostname
Please suggest if any better solution. Thanks.957704 wrote:
I need help how to grep that information from crontab -l
Please can you provide some insight how to grep that shell script name from list of crontab -l jobs
crontab -l > cron.log -- exporting the contents to a file
cat cron.log|grep something -- need some commands to grep that infoYou are missing the point. This forum is for discussion of SQL and PL/SQL questions. What does your question have to do with SQL or PL/SQL.
It's like you just walked into a hardware store and asked where they keep the fresh produce.
I will point out one thing about your question. You are assuming every entry in the crontab has exactly the same format. consider this crontab:
#=========================================================================
# NOTE: If this is on a clustered environment, all changes to this crontab
# must be replicated on all other nodes of the cluster!
# minute (0 thru 59)
# hour (0 thru 23)
# day-of-month (1 thru 31)
# month (1 thru 12)
# weekday (0 thru 6, sunday thru saturday)
# command
#=========================================================================
00 01 1-2 * 1,3,5,7 /u01/scripts/myscript01 5 orcl dev
00 04 * * * /u01/scripts/myscript02 hr 365 >/u01/logs/myscript2.lis
00 6 * * * /u01/scripts/myscript03 >/u01/logs/myscript3.lisThe variations are endless.
When you get to an appropriate forum (this on is not it) it will be helpful to explain your business requirement, not just your proposed technical solution. -
I bought a iPad 2 last year and somehow it was put in my husbands name not mine. I want to know how to take his name off of it and use my name.
Hi Abbyzoey03,
If you mean change the device's name, this article can help:
iTunes and iOS: Change the name of your iPhone, iPad, or iPod
http://support.apple.com/kb/ht3965
Cheers!
- Ari -
Hi ,
I activated some of the update rules.
In transport request I am getting lot of objects in the tree
for Title ROUTINE.
I want to check these routine objects.
when I copies this technical name and try to find out in
metadata repository I dont get anything.
I want to see what these routine objects are and why it is
coming in transport request because Update rules are already
present in the transport request , then why these extra objects?
Thanks,
JeetuHi,
the routines of the update rules can be found in table RSUPDROUT.
These are the routine IDs listed in the transport.
If you go with this ID to the table RSAABAP you will see the exact code of the routine.
I hope this helps!
Best regards,
Paula Csete -
What are start and end routines in BI 7.0..
Hi,
Can you please explain and give me a sample code ?
thanksHi,
depending on your data flow you have to use the routines .
Start routines - start routines:
It is used to perform preliminary calculations.if you have any modifications required before the actual transformation is done, then you must write those routines in the start routine of 7.0.
End routines - new:
You can use an end routine to postprocess data after transformation on a package-by-package basis.
Expert routine - update routine :
You can use the expert routine if there are not sufficient functions to perform a transformation. The expert routine should be used as an interim solution until the necessary functions are available in the standard routine. You can use this to program the transformation yourself without using the available rule types. If you have already created transformation rules, the system deletes them once you have created an expert routine.
Also Check the below link for detail info.
Routine in Transformation.
Reg
Pra
Maybe you are looking for
-
How can I scale up the entire document?
I want to keep all ratios of text and image the same but bump the document up by a couple inches; how do I change the entire scale of a document? (I have an A master to work with)
-
Error in the appropriation of Order - KO88
After running the kon2, cost centers are maintained with a balance of zero. KO88 to run, and the order is also cleared, but the maintenance cost center to take back the balance. What can be? I checked the rule of appropriation and it is correct.
-
Sample for use of parameters in Forms
Problem: database has data for several years. i want to select a year to calculate data. the year must be a parameter, the calculation is a program unit. can anayone send me an example how to pass the paramnter (year). i'll be glad too with a descrip
-
I rented a movie through ATV2 tonight with a house full of kids especially for New Years Eve...a big occasion! The movie streamed ok, and we had perfect picture but no sound. When we watched trailers and other video we had both sound and picture, yet
-
Hi. I want to read all files in a folder. For example: if in a folder I have the three next files file1, file4 and file13. Of course in the beginning I don't know which is its names because this is random. I need open all and then add its names in a