Routing change idoc in SAP LOIROU01/02

Hi All,
Has anyone used routing idoc LOIROU01/02 for change routing and allocate operations for BOM in SAP using we19 test tool. If so, please give me the minimum fields need to pass in we19 for LOIROU01/02 idoc to allocate an operation to a BOM component. It is urgent and any help is appreciated
Thanks
Ricky

Hi All
I am using we19 test tool to process routing idoc LOIROU02 (inbound processing)with some test values. After executing using standard inbound function module in R/3 4.7, I am getting a status 53 ( application document posted). This idoc is used for changing routings in PP module to allocate operations for BOM components in a master BOM material and Group. After processing, I went to routing transaction and checked but nothing is updated for operations. Do anyone knows why then the application document is successfully posted and giving status 53.
Any response is appreciated
Thanks

Similar Messages

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

Send Idoc to SAP in sequence and roll back if the last one fails

Hi All
I have a scenario like this.
System Ajore --> XI - > R/3
Ajore is a manufacturing system
Send material from Ajore to SAP through XI and create MATMAS idoc in SAP
Send change number from the Ajore to SAP through XI and create ECMMAS idoc in SAP
Send Bill of materials from the Ajore to SAP through XI and create BOMMAT idoc in SAP
All these will should be send in the sequence MATMAS, ECMMAS, BOMMAT to SAP. How can I achieve the sequence operation through XI?
Second challenge is when I send the BOMMAT to SAP and if it fails, then all the processed MATMAS, ECMMAS sent to SAP should be rolled back.
Is it possible to achieve using XI?
The reqmt is very urgent. Any help is really appreciated.
Thanks
Ricky

Hi Satish,
Thanks for the reply. Do I need to do event driven message processsing in XI for this? The other way is to schedule the RBDAPP01 in R/3 to post idocs in sequence based on the message type and Partner number
Does this makes sense?
And any idea bout the second question for roll back?
Thanks

Why to use chnage pointers for master data idoc why not the change idoc

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Hi,
It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
Regards,
Ferry Lianto

Mass change on Backflushing box in Routing change when several Alt. BOM

Hello Gurus,
Is there a standard program to tick the box Backflushing in Routing change ?
It tried to manage it with LSMW but unfortunately there is one major difficulty: more than one Alternative BOM.
When I click on CompAlloc, SAP displays a list of all Alternative BOM existing for the selection.
We can manage this list only with mouse click which LSMW doesn't manage properly.
Second problem is to tick in one shot all the box item.
Scenario I used:
Transaction CA02.
Enter Material / Plant / Group.
Diplay List of Operations.
Click on CompAlloc.
Click on one Alternative BOM -> Here is the problem 1
Display List of Material Component Overview.
Tick Backflushing for all items displayed -> Here is the problem 2
Many thanks.
Stéphane

Hello Veerabathiran Suresh,
My situation is slightly different. I have a ONE specific material that needs to be backflushed on the MANY materials it is being consumed by. Using CEWB I call all the BOM's that are using this material. Unfortunately CEWB only allows me to view only one material assignment and BOM it belongs to at a time for this specific material.
I am assuming the individual that started this thread needed MANY materials for ONE specific BOM backflushed. One material assignment needs to be viewed in this scenario.
Can it be done in mass, in my situation explained above (MANY BOM's using this ONE material and changing those backflush indicators)?

Missing IDOCS from SAP to BODI

I have an issue of missing idocs from sap going to BODI.
Idocs are received by BODI trough adapter, but there are idocs that are missing but are successfully sent by SAP. When trying to resend the idocs it was successfully received by BODI.
We thought that it is an intermittent connection issue, so we try to send idoc from SAP while the adapter was down. The idoc was successfully sent from SAP. Then we try to start again the adapter and it was loaded after sometime.
Iu2019m now out of idea on why does the idocs went missing. Can someone help me?
Thanks in advance.

Hi Parida,
IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
Run the Program RBDMOIND in SE38...
Changed on :<Date>
IDocs/Commit Work :100
Display IDoc not sent- Check the Check Box.
Now you will get list of un posted IDocs
Ramesh

Post Idoc from SAP to Thirdparty using XI

Dear Friends,
My requirement is sending the Idoc from SAP to Thirdparty system,but Thirdparty system also receive the Idoc format only.
so IDoc to Idoc scenario but SAP to Thirdparty system it is possible or not.
please tell me how ?
Regards,
Shalini Shah

You can use SAP Business Connector(BC) to convert IDOC to IDOC-XML at the third party legacy system.
With Business Connector see the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://www.erpgenie.com/mysap/bus_connector.htm
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

Flags in IDOC for change IDOCs

Hi,
If we have an order or delivery created using the standard create IDOC then how does the changes happen using the another standard change IDOC.
The problem i am facing is as follows:
we have a flat file which maps to create IDOC,
The same flat file maps to change IDOC. the problem is change IDOC has flags which need to be set, and only then the changes happen for the corresponding fields, as we dont know what fields will have changed values XI wont be able to set these flags.
Note: create and change routing conditions are properly identified.
Is there any better solution in XI side or should it be done from the sender side where in they have to set the flags in the sending structure.

Yeah you are right about everything, but the problem here is the changes that come in flat file have all the fields populated irrescpective of whether a field is actually having the change or not.
May be i shouldnt have used the word flag but should have used a ctrl field
and the idoc is such that we have a two segment
lets say we item segment which has qty, vloume , material.....
and there is control item segment which has ctrl qty , ctrl volume, ctrl material.....
so now the case is qty field can be updated if ctrl qty has X in it. its true also for the rest of the fields.
Now the problem is the flat file cant send these X in the ctrl fields. and XI cant put X in all the ctrl fields as if we do it that way its not updating the actual updated fields

Re-triggering Idocs from SAP Communication layer

Hi,
Our webmethods middleware went down for 4 hours. We are trying to see if there is a quick way to retrigger Idocs from SAP for around 3000 doc (various doc, PO, SO, Delivery, Shipment etc). Trying to see if we can change the status in SAP and retrigger (without writing a program). Is there a way to do it. Any pointers would be useful.
Thanks,
Anand

There is no quick way to resend IDocs that have already passed. I worked at a client in the past that had written a custom program to change the status of an IDoc. The report program had a similar selection screen to WE05, but current status and new status as parameters. The program would retrieve IDocs based on the selection criteria and update EDIDC-STATUS to '30'. You can then resend the IDocs using RSEOUT00.
You do not need to modify EDIDS.

Sales Order iDoc from SAP SCM 7.0

Hi Experts
I have two question fro you guys.
1. Can we generate VMI sales order idoc from SAP SCM 7.0? I know is can generate xml message. If we can generate idoc for VMI sales order from SAP SCM , please give me some direction or path to explore.
2. Can I use idoc to to create to VMI sales order in ECC skiping CIF. But the changes in ECC to these order should use the CIF to update the VMI orders in SAP SCM.
Please share your experience on this.

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

Reg: If changes done in SAP BO Analysis office, then Changes can be done in SAP BW in respective targets. But, is it possible to do the same changes in SAP ECC? How?

Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
Karteek

We are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC               BI               BO Analysis office
1 ------------->   1   ---------->         1   ------
                                                                        |
                                                                        | (Now Data is changed in Analysis office from 1 to 2)
                                                                        |
(?) <--------------   2 <----------         2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek

Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

Routing change idoc in SAP LOIROU01/02

Similar Messages

Maybe you are looking for