Routing changes

Hi Friends,
How can we check changes made in Routing for a particular peroid for a plant?
CA60/ CA61 is of no use , as it can be used for 1 mat. or for 1 group at a time.
Please help.
Thanks & Regards,
Sandeep

Dear,
Go to AUT10 enter period and T.Code CA02 then execute it.
Regards,
R.Brahmankar

Similar Messages

  • Mass change on Backflushing box in Routing change when several Alt. BOM

    Hello Gurus,
    Is there a standard program to tick the box Backflushing in Routing change ?
    It tried to manage it with LSMW but unfortunately there is one major difficulty: more than one Alternative BOM.
    When I click on CompAlloc, SAP displays a list of all Alternative BOM existing for the selection.
    We can manage this list only with mouse click which LSMW doesn't manage properly.
    Second problem is to tick in one shot all the box item.
    Scenario I used:
    Transaction CA02.
    Enter Material / Plant / Group.
    Diplay List of Operations.
    Click on CompAlloc.
    Click on one Alternative BOM -> Here is the problem 1
    Display List of Material Component Overview.
    Tick Backflushing for all items displayed -> Here is the problem 2
    Many thanks.
    Stéphane

    Hello Veerabathiran Suresh,
    My situation is slightly different.  I have a ONE specific material that needs to be backflushed on the MANY materials it is being consumed by.  Using CEWB I call all the BOM's that are using this material.  Unfortunately CEWB only allows me to view only one material assignment and BOM it belongs to at a time for this specific material. 
    I am assuming the individual that started this thread needed MANY materials for ONE specific BOM backflushed.  One material assignment needs to be viewed in this scenario.
    Can it be done in mass, in my situation explained above (MANY BOM's using this ONE material and changing those backflush indicators)?

  • How to see BOM and Routing changes

    Hi,
          Can anyone help me in finding the changes made in BOM and Routing

    Hi,
    why open two thread for same question in this forum, pls close any one
    Routing changes: CA60
    BOM changes : CS80
    or
    Goto CS03, enter Material, Plant and Bom Usage.
    Goto Alternate Overview of BOM.
    Select the BOM.
    In the Menu Bar, Click Environment -> Change documents.
    Regards,
    Sankaran
    Regards,
    Sankaran

  • Routing Change display

    Could any one help to get  the routing changes for a material.

    Hi
    If your question is solved, make a habbit to close the question and reward points as a way to thanks.
    regards
    Srinivas

  • AirPrint - iPhone 5 can not find printer after router change

    AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

    I'd look to HP for support.
    Here's an HP Airprint-related trouble-shooting page:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
    Lots more info on the HP support site.

  • Monitoring/Traps for Route Changes: OSPF

    Hello all.  Silly question time.
    I'm running OSPF on Cisco 6500s and would like to be notified when route changes happen.
    I can't figure a way to get that notification.  I've found all sorts of traps available to alert me to all sorts of OSPF information; but I can't find anything specific to route changes.
    I'm using Solarwinds Orion as well.
    I have to be missing something simple but I can't seem to figure out what that is.  Does anyone know how to get the info/trap sent to Orion I'm loking for?
    Any help is greatly appreciated.
    Hamp

    See this discussion for a great explanation by Joe that should be what your looking for when neighbors change ocurr.
    https://supportforums.cisco.com/message/3066375

  • Yoga 2 11 drops signal on Airport router - change router settings?

    i have spent several hours with Lenovo tech supports (all perfectly friendly), trying to fix the issue of the Yoga 2 11 consistently dropping the wifi connection at my workplace.  Two important considerations:
    * It's not entirely on the Yoga, as it does not have this issue with home wifi, coffee shop wifi, etc.
    * And several other PC and Mac desktop and laptops have no trouble with the workplace wifi.  The problem is definitely the way that the Yoga interacts with the Airport router.
    Lenovo tech support has made numerous changes to my drivers, system settings, and so on, but cannot fix the problem. The next solution is to return the Yoga to factory settings -- a solution I'm convinced will not work as I've already returned one laptop to Best Buy for the same problem. In other words, two Yogas, directly out of the box (presumably with factory settings), had this issue.
    My question is -- is there possibly a way I can change the Airport router settings (or set up a new network entirely) that might be more compatible with the Yoga 2 11 with Intel Wireless-N 7260 card?  If I can't get the Yoga to talk to the router, maybe the router can be changed to talk to the Yoga. 

    Which model AirPort Base Station do you have?
    To determine that open AirPort Utility, select your base station, then position your cursor over the base station's name. Reply with the text shown adjacent to "model".

  • HP Photosmart B209a no longer connecting to wireless since modem/router change

    I recently had to change from a Motorola Surfboard modem and Netgear router (both at least 5 years old). The new modem/router combo is a C3700 Docsis 3.0. My HP Photosmart Plus printer model B209a no longer connects to the wireless network.  I've tried both push button and pin. I get a WPS failed to connect. When I print network settings my network is listed but the printer shows as being offline with no active conection . Firmware is EIL1FNO926AR and shows up as the latest revision for the printer. Under 802.11 Wireless the mac address is given and status is disconnected.  By the way, the printer and modem/router are approximately 3 feet apart on the same desk.
    Any ideas as to what to do to get my printer back online or is incompatible with the new modem/router?
    Thanks
    This question was solved.
    View Solution.

    Replacing your wireless router try here.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Route Change Log Report

    Please advise how to sort out change logs of route on existing order lines from tables SE16 CDHDR/CDPOS. Since there's no available tranaction Code \ Report for user to track change history.
    If any other solution available, please advise it as well.
    Thanks in advance!
    Regards.......

    Dear,
    Thanks for your quick reply, I know that we can see this in VA02, I have a set of 200 Sales Orders, Now the Question is :
    Is there any report \ Tcode where I can see all the changes made in the routes at a time?????
    Hope you understand the question.
    Regards..................

  • Problems after router change

    I have just changed my wireless router and am having problems connecting with iChat video. I have tested it with Apple testers on my old router (802.11g/b) and it works perfectly but it will not connect with my new one (802.11n) although it does work OK from one of my computers to the other - perhaps a local network issue? The message I get is that I have been disconnected because no data has been received in the last 10 seconds. The routers are the same make (Netgear) and I have populated each of them with much the same data regarding Firewall rules etc. Any help would be appreciated. I could just go back to the old one but I'm hoping for better speeds and range from the new one so would like to get it working.

    Hi,
    The DG834G Netgear that I had would not work without the DOS being Off and the Pings being allowed.
    Do you still have the Port Forwarding setting Enabled ?
    I am curious about the VPN.
    Some VPNs are set up with an Internet connection as part of the process.
    It sounds like this one is not. iChat cannot resolve two connections to the Internet (Wifi and Ethernet at the same time for instance)
    The No Data for 10 Secs message means you were connected (even if you did not see any Video or hear any Audio).
    The message means that iChat did not end the chat and that an external event did, such as pulling an Ethernet cable, router failure, turning off the Mac's Airport card.
    DOS work on a threshold basis and if it receives "Too much Data, Too Quickly" it cuts the port that this is happening on to "Protect" the whole connection.
    This threshold cannot be changed and tends to be lower than iChat can Stream video over modern connection speeds.
    I would try two things separately.
    The SIP ALG is something I did not have on my Netgear.
    iChat Uses SIP so I would try it with that ON.
    Also try setting iChat menu > Preferences > Video Section > Bandwidth Limit to 500kbps
    iChat 5 Can "See" your whole Internet Connection speed. (iChat 4 and Earlier was limited to a max of 1.5Mbps set in System Preferences > Quicktime > Streaming - a setting that does not exist in Snow Leopard)
    It could be that the new router allows faster throughput and that you have moved to iChat 5 meaning you are bumping into the DOS threshold.
    Of course the issue could be at the other end. The log is not that specific about which end "Cut" the connection.
    7:34 PM Sunday; July 25, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Rate Routing Changes

    Hi All,
    Is there a possibilty to find out the changes made in the Rate Routing of a BOM regarding to Component Allocation over a period of time.
    Regards,
    R. Vijayakumar

    Dear Rajavelu,
    Try the standard report CA60,for task list type R - Rate Routing,include the check box for for all the options under Detailed Change
    documentation for and execute the report for some date range for any material and plant combination,this will satisfy your
    requirement.
    Regards
    S Mangalraj

  • Routing change idoc in SAP  LOIROU01/02

    Hi All,
    Has anyone used routing idoc LOIROU01/02 for change routing and allocate operations for BOM in SAP using we19 test tool. If so, please give me the minimum fields need to pass in we19 for LOIROU01/02 idoc to allocate an operation to a BOM component. It is urgent and any help is appreciated
    Thanks
    Ricky

    Hi All
    I am using we19 test tool to process routing idoc LOIROU02 (inbound processing)with some test values. After executing using standard inbound function module in R/3 4.7, I am getting a status 53 ( application document posted). This idoc is used for changing routings in PP module to allocate operations for BOM components in a master BOM material and Group. After processing, I went to routing transaction and checked but nothing is updated for operations. Do anyone knows why then the application document is successfully posted and giving status 53.
    Any response is appreciated
    Thanks

  • My ipad 2 won't find it's current location since router change.

    My ipad 2 32gb wifi won't find it's current location. I've recently changed my old router from orange with a new one from orange and now my ipad can't find current location. I've looked at the settings for both the ipad and the router and should all work. Help?

    Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.
    If that doesn't fix the problem then go to Settings>General>Reset, then Reset Network Settings.

  • Require Operation Increment fiels as optional in ca02(Routing change)

    Dear Friends,
    I have a business requiremnt for which i require *Operation Increment(plpod-vintv)*  field as optional  instead of mandatory .
    This field come at the time of changing Routing in CA02 while assigning the reference operation set to material.
    Due to this the operation number in the Routing deferred from the operation number in the reference operation set .
    Please suggest me possible way to overcome this problem.

    Tran - SPO
    Go to Production > Basic Data > Routing > Control Data > Field Selection.
    Here you can make fields as optional.
    Regards
    RAJESH DANGLE
    do reward if problem solved.

  • HP P1102w, router changed and IP printer address listed as 0.0.0.0

    This printer was a star til Comcast forced a change of wireless routers, since then I cannot reconnect printer to allow for wireless printing. When I print the  Self test page, thhe IP addresses are listed as 0.0.0.0
    My network admin cannot help me unless I get a new IP address.
    Any ideas how to proceed

    Hi,
    It sounds like the new Comcast router is not providing wireless services or that are perhaps the service is not compatible with your printer.  I suspect that the old Linksys was a 2.4 ghz model.  I would ask Comcast if the router is providing access point services for 2.4 ghz and to verify that the service is active. The wireless service from what I understand is not free. Another possibility is that the new Comcast router is providing IP version 6 which is different than the Linksys which only provided IP version 4 addressing which is another question to ask Comcast about.
    If Comcast indicates that the wireless service is active for IP version 4 then download the diagnostic tools and run the Network diagnostic in the Print and Scan Doctor utility.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for