Routing - decimal places for unit of measure conversion quantity

Hello all,
in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
Where in customizing can I change that?
Thanks
Anne

Hello,
thanks for the answers.
The UoM is LB.
I've already checked CUNI, but I can not find LB..?
Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
Thanks
Anne

Similar Messages

  • 3 decimal places for unit of measure KG

    Hi,
    I would like to create a production order. In the field total quant I would like to give the 3 decimal places of mesure KG.
    Error: "Only 2 decimal places are permitted for unit of measure KG"
    Where can I customize the system, so that 3 decimal places have been permited.
    thanks
    Desy

    thanks
    I've seen the place in Customizing where I will maintain it.
    Now I only have display authorization for class SS
    I will speak with our Basis for more authorization.
    Thanks
    Desy

  • Decimal places for unit of measure

    Dear All ,
    If i change the Decimal Places for rounding in Customizing for Unit of measure ( CUNI tcode) for KG as 6 from 3 whether it will calculate with the 6 decimal places like 0.004756 ( earlier with 3 decimal places it will calculate any multiplication with 0.004 now i want the same with 0.004756 Kg )
    whether it will work ?
    and where it will impact

    Hi
    No it will not work like that. And it depend on the transaction where you enter that. In case of Purchase order quntity field it will be always with 2 decimal places because field MENGE has 2 decimal places only. If your system is already live then it is not advisible to do such changes.
    Regards
    Antony

  • Changing number of decimal places for Unit of Measure

    Hi All,
    I have a requirement to convert a quantity in one unit of measure to another (custom) unit of measure.
    The issue is that the custom unit of measure has 4 decimal places (customer requirement). I found function module MD_CONVERT_MATERIAL_UNIT which does the trick for regular, 3 decimal places, UoM's. It won't output 4 decimal places since the output data type is EKPO-MENGE, which has 3 decimal places.
    Does anyone have experience with trying to convert material's UoMs into 4 or more decimal places?
    Thanks!

    <b>round_f_to_15_decs</b>  round variable of type f to 15 decimals
    Sometimes type F (float) is used to represent exact data (Amounts, Quantities):
    if values are to big to be represented as Packed (> 31 decimals)
    to significally improve performance of calculations, e.g. in statistical reports
    G_DECIMAL_PLACES_GET
    REPORT Z_ROUNDING .
    DATA: float TYPE f,
          amount TYPE p DECIMALS 2,
          correctamount TYPE p DECIMALS 2,
          chars(5) TYPE c value '1.005'.
    CLASS cl_abap_math DEFINITION LOAD.
    correctamount = chars.
    WRITE: / 'Exactly:', chars,
           / 'Correct Amount:',  correctamount.
    float = chars.
    amount = float.
    skip 2.
    WRITE: / '==== Usual Processing:',
           / 'Float:', float,
           / 'Decimals 3:', float DECIMALS 3,
           / 'Decimals 2:', float DECIMALS 2,
           / 'Amount:',  amount.
    float = cl_abap_math=>round_f_to_15_decs( float ).
    amount = float.
    skip 2.
    WRITE: / '==== Correct Processing:',
           / 'Float:', float,
           / 'Decimals 3:', float DECIMALS 3,
           / 'Decimals 2:', float DECIMALS 2,
           / 'Amount:',  amount.

  • How to allows decimal place for unit of measure of order confirmation

    Hi Guys
    we have some special cases here that need to confirm the order quantity as decimal place,is that possible made some customizing in code CO11N? or have some ways support it .....
    ex. work order A   10 EA
    - operation 1   : colse 10 EA
    - operation 2   : close 4.5 EA
    Regards/Eric

    Hi,
    You can set a UoM to allow decimals in transaction CUNI. But i fail to understand why you would want to set EA to have decimals.
    If a material is to be managed in decimals then evaluate the usage of a different UoM which allows for decimals.
    Regards,
    Vivek

  • DECIMAL PLACE UN UNIT OF MEASURE

    Dear Friends
    is ther any way to maintain decimal place during alternate  unit of measure.  FOr Ex 1  bar = 23.34 Kg. without rounding 100 bar = 2334 kg. i already maintained decimal in CUNI. still not able to maintain decimal.
    Thanks and Regards
    Madhavan

    Yes you should be able to maintain this. Ensure that you allow decimals for the UOM Kg in CUNI it should allow this conversion you are referring to. You should put decimal places for both display and conversion.
    Edited by: Hemalatha Raghavendran on Jul 20, 2009 4:33 PM

  • Upto 4 decimal point for unit of measure

    hi,
    We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3,   SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
    best rgds,

    Dear Eric,
    To change decimal places of Materials follow this:
    IMG - SAP NetWeaver - General Settings - Check Units of Measurement
    select Units of Measurement & select required Unit of Measure & set decimal places.
    Hope this helps...
    Give points if useful...
    Thanks,
    Jignesh Mehta

  • Decimal places in unit of measure in Sales order

    Hi,
    In the Sales Order application in PCUI, when I create a create an order for customer XYZ, and add product ABC for qty 1 which uses unit of measure PC, the qty is displayed with 3 decimals as 1,000 whereas if I use the unit of measure EA the quantity is displayed without the 3 decimals as 1. I need the unit of measure PC to not have the decimal places like in SAPGUI.
    Could anyone help me understand how this can be achieved?
    Thank you for help in advance.
    Regards,
    Priya

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • Decimal Points for Unit of Measurement

    Hi all
    For doing service entry in the QTY field can we put the value upto six decimal for any unit.
    in customisation for Unit of measurement can we configure this thing putting decimal places - six or is there any other setting is required
    Please help
    Thanks in advance
    Rajesh

    Hi,
    Yes in customisation for Unit of measurement you can customize it,
    but it will be valid whenver you use this UOM in the system.
    There is one thing also you can do
    The Quantity fields decimal points in service entry is by default 3 digits ,
    so to use 1,123456  quantity for lets say price 10 $
    you can multiply both sides with 1000
    i mean
    use 1123,456 for 10000 $
    just an idea
    Regards
    Hope it helps

  • Decimal Places in Unit of Measure

    Hi,
    I want to post a service entry sheet for an activity with 5 decimal values.Five decimal values is required  in order to arrive at exact value of service rendered.
    I tried changing the decimal values for the particular UOM in CUNI. Still iam not able to do service entry sheet.
    I require your solutions.
    Thanks,
    Karthik.

    Hi,
    Need to take help from ABAP consultant.
    Change the decimals from 3- 5 also need access key for same.
    Regards
    Gietesh

  • Difference between Decimal places for  Quatities and Units

    Can anyone please explain the difference between the followings -
    1. Number of Decimal places for  Quantities, and
    2. Number of Decimal places for Units
    In SAP B1 2007B General Settings.

    Hi,
    The Decimal places in the general setting indicates
    Amounts:Display of row and document details
    Prices:Display for price fields in documents,item  data,price lists
    Rates:Display of decimals in currency calculation
    Quantity:Display of quantity in documents and item data
    Percent:Display used in calculation of tax amounts and discounts
    Units:Display used in units(UoM) of items.
    Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
    Hope this is helpful

  • Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

    Hi,
    I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
    Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
    Thanks.
    Regards
    Mansi

    Hi Mansi,
    Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
    Regards,
    R.Brahmankar

  • Routing unit of measure conversion

    Dear guru ,
    I have a different unit of measure for one operation of my routing.
    Which is the problem if I maintain relation 1 to 1 in the routing unit of measure conversion ?
    Thanks.

    Dear  ,
    One operation of my routing have a different unit of measure (EA for operation , KG for routing).
    I don't know the exact conversion factor between operation and routing.
    This factor is only known after the confermation of the production order.
    Which problem occurs if i maintain relation 1 to 1 (numerator and denominator) in the routing unit of measure conversion.
    Thanks.

  • Automatically pick material master unit of measure conversion to routing

    I maintain finish goods conversion factor in material master u201CAdditional Data: Unit of measureu201D as M to KG and basic unit of measure for finish good in material master is in KG.
    I attached multiple operations for the finish goods material in routing.
    Some operations base unit of measure is M and others its KG.
    I want to pick material master unit of measure conversion automatically when Iu2019m creating routing for the finish good material in ca01. (Unit of measure conversion for header and operation of the operation)
    Can anyone letme know the SAP configuration for this.

    Hi!,
    Please expalin about the purpose of this requirement, because when you will create a order using that routing, at that time system will definately do the unit conversion automatically.
    Regards,
    Uday

  • Unit of measure conversion for CIN is not relevant for pricing

    During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
    Any light how to fix this issue?
    Thanks,
    Suseela. V

    Dear Suseela,
    You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
    Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
    Hope it will help. Thanks!
    Regards
    Indra

Maybe you are looking for

  • Steps to extend HzPuiPersonProfileVO

    All, I am trying to extend VO HzPuiPersonProfileVO....by adding the Hz_Education (Degree_Received column) table. Eventually, I will be adding a region to a page (imcPerProfile) and in that region will be this new attribute in table format. Question i

  • Busting does not work after XDOLOAD to different instance

    Oralce report - output XML template RTF burst control file all work in one instance, but after using XDOLOAD to move to another application instance on the same server, the bursting fails with a nullpointer.exception I have checked the OPP processor

  • Identify non-matched songs?

    After iTunes Match recognition and upload of non-matched songs in the iTunes catalog, how can I know wich musics was non matched? Thanks in advance for your answers.

  • Batch Convert PowerPoint to Movies file name issue

    I need to batch convert powerpoint presentations to movie. But the save option forces me to use the same name on every movie. I want it to just save the presentation with the same file name. So if the powerpoint is: MyPresentation.ppt then the movie

  • Running the browser in a captivate window

    I would like to create an elearning project, whereby I would have the user input some HTML code in in one window and then be able to render it through a browser in another window , dyamically. The idea is to run a real browser in some kind of a capti