Routing error for LSMw

hi i am getting ths error whiled assigning materials to operations,
You cannot edit the task list object with activity type.
i am using direct input to upload routing material assignment to operation and this is my structure.
my source structure
GRP
GRPCT
OPERAT
ALTNATIVEBOM
HEAMEA
PLANT
MATER

Dear,
For component allocation to routing I will suggest you to go for BDC.
If you are using LSMW the please refer the OSS Note 736263 and Note 831465 - Component assignments to BOM
Regards,
R.Brahmankar

Similar Messages

Routing error for HTTP to JDBC scenarion

Getting following error: please advise.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-BS_POC_TEMP_Sender</SAP:P1>
<SAP:P2>-POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -BS_POC_TEMP_Sender to receiver -POC_DB_Temp_Receiver_Channel,http://xys.com/xi/projects/syn/n1.IM_POC_TEMP_DB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hey
Check the URL you have provided the sender system for HTTP.then check if you have configured receiver agreement/receiver determination for that combination of sender and receiver
The messages which is coming in sxmb_moni is unable to find any receiver side configuration for the sender attributes( like sender party/service or sender interface name).
Thanx
Aamir

How To Track the Errors For LSMW Idoc

Hello Expert
While working on Material Master Idoc getting an error message
Error 51 Application not posted
Details: IDoc included in IDoc packet containing an error: transfer it separately
How do i tackle this
Thanks

Hi,
I hope idoc is failing because of problem with the application data. Its not because of RFC. You told that you were getting 51, it means inbound idoc...if its problem with RFC, before creation of idoc itself it should be there...but now idoc created successfully and tried to post / create application document. there it was failing.
Can you give details some thing like, which inbound FM you are using to post the idoc & idoc type.
Regards,
DJ
reward, if its useful

Error in LSMW while specifying file for Material Cassification and Info Rec

Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
Amit

Hi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn

LSMW Errors for Excel file upload

Hi all,
We've loaded an Excel file with 20,000+ records into SAP using LSMW and a background run. However, the LSMW returned errors for about 2,000 of those records and seems to have processed the other 18,000. Questions as follows:
1. Is there a way to extract the 2000 records into another Excel file?
2. If so, how can I isolate the 2000 records so that I can reload them with correct information? I do not want to have to go through each record one by one to find them.
3. How can I identify what the problem was for a record that produced an error?
Thanks in advance. Points will be awarded for helpful answers.

u have used LSMW which will normally create a Session which will be executed using SM35 in background mode...Goto the session and click on errors...the errors are been shown up..U can correct there itself or else prepare another one with correct data and do a lsmw once again.

Error in LSMW for ME11

Hi,
I am getting error while creating LSMW for ME11, No QM info record exists for vendor xxxx.
How will I know for vendor QM info record to be maintained.
Smitha

this problem has actually nothing to do with LSMW, you get the same error without LSMW
In your material master QM view is a control key, and based on the cusotmizing of the control key it requires a Q-info record.

Button/Branch Routing Error:ERR-7621 Could not determine workspace for app

We are getting an error for one of our applications that is only occurring in Production and we are unable to reproduce in any of our other environments.
When the user clicks a button on one specific page (Save, Back, Add) the user is getting the following error:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7621 Could not determine workspace for application (:) on application accept.
The Back button is the one that doesn't make sense why it is not working as it is a simple redirect to the previous page.
Version: Application Express 2.2.1.00.04
Please help as this issue is affecting our customer from processing orders. I have looked for this error previously, but none seem related to Buttons/Branches. Let me know if you need anymore information.
Thank you,
Amy

Amy,
I imported the same file into the workspace that I used to import into production.
Perfect.
Do you need me to take an export from production directly and reimport?
No but if you could email me that file, I might be able to spot something. I can't find anything wrong with what I see so far. Send to [email protected], to my attention, please.
Also, if you would change your OTN user profile and handle to include your first name, that would help us.
Scott

First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy Chapman

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IDOC generation error in LSMW

while loading the data for customer master i have basic data, sales data and conmpany code data in my data structure. I am trying to upload only sales data through IDOC . I have assigned the sales data text file to the sales data structure. For the rest of the structures I am not attaching any files. While processing the IDOC it displays and error "EDI: Table passed to EDI_SEGMENTS_ADD_BLOCK is empty"
Do I need to attach files to the other 2 structures defined in LSMW ,if I am not maitaining the data for the same.
If any one has document related to IDOC data uploading in LSMW , please send it to [email protected]
points will be rewarded for useful info

Hi Pratap,
You can go through this link for LSMW Documentation.
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
Reward points if helpful.
Regards,
Harini

Creat Job for LSMW (periodical data transfer)- idoc BLAORD

Hi,
We are trying to create job for LSMW (thru frame program for periodic data transfer) for idoc BLAORD (Purchasing contract)
When I am running the job that I created, the job is cancelled and the error is:
"Upload from front-end is not possible in batch mode.
Message no. /SAPDMC/LSMW_OBJ_070 020"
How can I correct that? so I will be able to run a job (the job mast run background?)
Thanks,
Tal Sasson

Hello,
I was also receiving the same message /SAPDMC/LSMW_OBJ_070 020 even though I specified in /SAPDMC/SAP_LSMW_INTERFACE the server path. The problem was that in LSMW->Specify Files you have to delete the definition of front-end files and define application server files.
That Flag File (Path and Name) (field /SAPDMC/LSOINP-FILENAME in program /SAPDMC/SAP_LSMW_INTERFACE) is kind of useless since it is ignored anyway and files defined in LSMW object are imported and they have to be read anyway if you use more than one file.
Regards,
Peter

How to handle BEA-382108 error in route error handler?

Hi,
I have a proxy service with error handler at route level. when any wrong inputs are given to this proxy the Biz will generate fault with error as BEA-382108
having error message as XPATH can only be done for XML or MFL content. This is error is handled by system error handler but not by route error handler.
Can any tell me how to handle this error in route error handler...?

In route Error Handler.
Add If condition and add fn:contains($fault,"BEA-382108") in the if condition, and add your code/logic that you want to implement in case of this error in IF condiiton.
Let me know if this helps.
Regards,
Karan

Error in LSMW : Enter a Valid Value

Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
Tulasi

Perform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin

Router Error Codes

Hello, I am trying to find one of my router error codes, however I can't seem to locate the manual below.
Can someone tell me how to find it?
Error code from the ICM CallRouter process. For information about a specific Router ErrorCode, refer to the Error Messages section of the *** ICM Master Help ***.
Thanks!

Barry,
This link should provide directions for looking up other codes...
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_qanda_item09186a008024d1ef.shtml
Remember to rate helpful posts...

Where to fix errors in lsmw?

where to fix errors in lsmw?

hi sunil
refer the following link
it will give u full step by step process for lsmw
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
In the field mappings and conversion rules,
in the global section,define an internal table.
data : begin of it_errors occurs 0,
desc type string,
end of it_errors.
and where ever you have wrong or empty values for the fields,populate error there to the internal table.
for example, if Material no is blank,i have to give err msg
IF NOT MATMAS_MRPVIEW-MATNR IS INITIAL.
BMM00-MATNR = MATMAS_MRPVIEW-MATNR.
else.
IT_ERROR-DESC = 'Material no is empty'.
append it_error.
SKIP_RECORD. "to skip further processing of this error record.
ENDIF.
like this you populate all the error records to that IT_ERRORS internal table.
and finally download it using GUI_DOWNLOAD in the event
'__END_OF_PROCESSING__'
there is another way also, you can create a Session in the LSMW, and record the error records in the session then process the error records in the session
regards
navjot
reward and close all ur threads
Message was edited by:
navjot sharma

DMVPN and %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) Error

%DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7)
I had pre-allocated tunnel ip's to remote spokes , some of them were implemented and put into production. Some of them got the config but the tunnel interfaces were left at shut.
Its because of this reason that the DMVPN HUB keeps getting nhrp request from one of the inactive spokes. Following is the sh ip nhrp extract :-
10.x.x22/32
   Tunnel0 created 00:02:58, expire 00:00:06
   Type: incomplete, Flags: negative
   Cache hits: 7
I just cant seem to find the spoke WAN ip to identify it. I tried debugs but just cant get it.
From HUB:-
Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
Nov 30 10:36:32: NHRP: Send Resolution Request via Tunnel0 vrf 0, packet size: 86
Nov 30 10:36:32: (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
Nov 30 10:36:32:      shtl: 4(NSAP), sstl: 0(NSAP)
Nov 30 10:36:32:      pktsz: 86 extoff: 52
Nov 30 10:36:32: (M) flags: "router auth src-stable nat ", reqid: 46113
Nov 30 10:36:32:      src NBMA: 20.x.x.x.
Nov 30 10:36:32:      src protocol: 10.x.x.1, dst protocol: 10.x.x.22
Nov 30 10:36:32: (C-1) code: no error(0)
Nov 30 10:36:32:        prefix: 32, mtu: 17912, hd_time: 360
Nov 30 10:36:32:        addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0, pref: 0 Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
So my question is , How do i find out the spoke wan ip , so i can do something about it. For now, its just filling up my logs on HUb router...not good ;-))

Hello Marcin,
If tunnel interface is shut no NHRP activity should be going, on top, in debugs you point the hub is sending resolution request, not receiving it.
Agree, I expected the same, but unfortunately this is not the case. Spoke does sent out NHRP requests even with Tunnel status as admin shut.
If your hub does not have NHS, it will not know where to send it's resolution request.
I am still on DMVPN Phase 1, so Spokes dont talk to other spokes yet.
Are you positive that there is nothing that is sending packets towards 10.x.x.22 on hub side (sniffer trace of classyfing ACL on "LAN")?
Other then a spoke, it cant be anthing, as the subnet is dedicted for tunnel interface's.
If you know it's not a misconfig and there is no traffic on hub side initiated to 10.x.x.22, try removing and adding full tunnel configuration. i.e. we want to make sure that crypto socket gets closed and restrated.
I can do this over weekend, but i am sure this is not going to fix the problem, reason being, that the HUB was setup before anything else and then we started migrating spokes from primary legacy gre tunnels to dmvpn tunnel as primary and legacy as a backup.
Guess, I am still looking for the answer...Is there a WAN acl that i can use to filter the successfully migrated spokes and log the deny message as in to know what remote wan ip carries along the tunnel ip of .22 or any other debug ??

Routing error for LSMw

Similar Messages

Maybe you are looking for