Routing interface
HI,
With Standard SAPMEINT I dont see any interface available for routing update from SAPME TO SAP ERP in MII ? is there any ?
Thanks,
Raveen
Ramya,
Please take a look at Doc ID: Note:131898.1 which describes about BOM and Routing Interface with sample code.
Thanks,
Sudhakar
Similar Messages
-
Bill and Routing Interface concurrent program is not processing component
Hi All,
While running Bill and Routing Interface concurrent program,not processing the component item(Line Item) from bom_inventory_comps_interface,still it show process flag as 1. where as billing item(Header Item) is successfully done..i have tried with all the option by giving component sequence id and batch id still it is not processing component item..
Is it recommendable to give bill sequence id and component sequence id in interface table using bom_inventory_component_s sequence..
I will be very pleased if i listen from u guys... Plz help me in resolving this issue..
My Header Insert Stmt..
INSERT INTO apps.bom_bill_of_mtls_interface@system_link_visma
(assembly_item_id, organization_id,
alternate_bom_designator, last_update_date,
last_updated_by, creation_date, created_by,
revision, item_number, item_description,
implementation_date, transaction_type,
process_flag, assembly_type, batch_id
VALUES (l_inv_item_id, l_org_id,
NULL, SYSDATE,
1318, SYSDATE, 1318,
l_revision, l_item_num, l_description,
SYSDATE, 'CREATE',
1, 1, 10003535
Component Insert stmt
INSERT INTO apps.bom_inventory_comps_interface@system_link_visma
(operation_seq_num, component_item_id,
item_num, basis_type, component_quantity,
auto_request_material, effectivity_date,
disable_date, planning_factor,
component_yield_factor,
enforce_int_requirements,
include_in_cost_rollup, wip_supply_type,
supply_subinventory, supply_locator_id,
check_atp, optional,
mutually_exclusive_options,
low_quantity, high_quantity,
so_basis, shipping_allowed,
include_on_ship_docs, required_to_ship,
required_for_revenue, component_remarks,
transaction_type, process_flag,
assembly_item_id, component_item_number,
batch_id,component_sequence_id
VALUES (l_operation_seq, l_comp_item_id,
cur2.item_sequence, l_basis, cur2.quantity,
l_auto_request_mtls, cur2.from_date,
cur2.TO_DATE, cur2.planning_factor,
cur2.yield_factor,
l_enforce_int_requirements,
l_include_in_cost_rollup, l_supply_type,
l_supply_subinventory, NULL,
l_check_atp, l_optional,
l_mutually_exclusive_options,
cur2.minimum_quantity, cur2.maximum_quantity,
l_sale_order_basis, l_shippable_flag,
l_include_on_ship_docs, l_required_to_ship,
l_required_for_revenue, cur2.comments,
'CREATE', 1,
l_inv_item_id, l_comp_item_num,
10003535,apps.bom_inventory_components_s.nextval@system_link_visma
For Subcomponent Insert Stmt
INSERT INTO apps.bom_sub_comps_interface@system_link_visma
(substitute_component_id,
substitute_item_quantity,
assembly_item_id, component_item_id,
operation_seq_num, organization_id,
substitute_comp_number,
component_item_number,
assembly_item_number,
transaction_type, process_flag,
enforce_int_requirements,
effectivity_date,component_sequence_id,batch_id
VALUES (l_sub_comp_item_id,
cur3.quantity,
l_inv_item_id, l_comp_item_id,
cur2.operation_sequence, l_org_id,
l_sub_comp_item_num,
l_comp_item_num,
l_item_num,
'CREATE', 1,
l_enforce_int_requirements,
SYSDATE,apps.bom_inventory_components_s.currval@system_link_visma,10003535
Thanks
Raman Sharma
Edited by: 929841 on May 4, 2012 12:28 AM
Edited by: 929841 on May 4, 2012 2:58 AMYou need to populate the organization_id or organization_code in bom_inventory_comps_interface.
Here is a minimal insert
INSERT INTO bom.bom_inventory_comps_interface
(operation_seq_num, last_update_date, last_updated_by,
creation_date, created_by, process_flag, transaction_type,
bom_item_type,
effectivity_date, organization_code, assembly_item_number,
item_num, component_item_number, component_quantity
VALUES (1 -- op_seq_num
,SYSDATE, 1433
,SYSDATE, 1433, 1 -- process_flag
,'Create',
4 -- bom_item_type 1 Model; 2 Option class; 3 Planning; 4 Standard; 5 Product family
,SYSDATE - 1, 'PUB', 'SSGPARENT1' -- assembly_item_number
,10 --item_num
, 'SSGCOMP1' -- component_item_number
, 10 --qty
)Sandeep Gandhi -
I press reset and now i can't get into router interface?
Yestoday i was just experimenting with my router. I set up a restriction for 12am to 12:05am to see if it will block my sister's internet just for the fun.
However it did not work.
Today my internet was slow because of my sister's laptop. Probably downloading some soft of content. I decide to press the reset button therefore her connection would be taken off.
However now i want to fix that. I understand how to get into my router's interface:
-By going to my computer and then typing 192.168.1.1 on top...
-Yestoday when i did that it worked. I was able to get into router interface, but now i can't. It gives me "cannot find server"
I don't understand why i can't get into my router's set up~
Can this be fixed?it might be that the reaosn why you're not accessing up the router's set-up page is because the computer connected to it is not getting a valid IP adress already...
to check this...
go to START, then RUN
type in cmd
in the command line, type in ipconfig
take note of your IP adress... that's the computer IP adress..
Now, take note of your default gateway... that is equivalent to your router's IP adress...
in the same window, type in (ping default gateway #) ping 192.168.1.1 . if it replies, then your router's interface should be able to open up
launch internet explorer, then type in http://192.168.1.1
"a helping hand in a community makes the world a universe" -
Network Routings not imported through "Bill and Routing Interface" program
Hi,
I wanted to import Network routing to Shop Floor Manager hence I am using bom_op_routings_interface and then I am running "Bill and Routing Interface" program. But import program is errored with "You do not have access to items of type standard, so you may not be able to insert, update or delete routings ot this item type".
Highly appreciate if any one clarify why this error is issued by Import program.
Thanks in advance.
Subramanyam.Please see if the solution in (BOM API Bom_Rtg_Pub.Process_Rtg is not Creating or Updating Maintenance Routings [ID 761976.1]) helps.
Thanks,
Hussein -
ACE bridge and routed interface in the same context
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
I am wondering if it is possible to configure one ACE context to support both routed and bridge interface?
I would like to have a bridge-mode context but in the same time I would like to have a separated OOB interface for management.
If it is possible how they could interact to each other?
Thank you in advance for any answer
Regards
Lukasz/* Style Definitions */
table.MsoNormalTable
{mso-style-name:Standardowy;
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Hello
We've just tried to configure bridged and routed interfaces at the same time in the lab and we've had a problem.
When we added the def gw for the bridged config we noticed that we had an issue with the traffic src by the rservers in the routed config.
When we deleted the new def gw, the problem disappeared.
I am attaching the lab config.
When we added to it the following line
ip route 0.0.0.0 0.0.0.0 10.1.1.163
reals B1-B10 could not communicate to the outside world.
Do you know why it does not worked and what could we do to fix it ?
Thank you in advance.
Regards
Lukas -
Extending VLANs across routed interfaces
Hello;
I'm trying to create a L3 core network. The core equipment will be Cisco 3750 enhanced. My idea is make each link between core 3750 a routed interface, with /30 IP addresses.
The problem is the customer needs some VLANs extended across the full enterprise. Is there any way to encapsulate the VLAN inside routed interface?
Thanks in advance.I realize this thread is 5+ years old, but I feel like commenting anyway.
If you want to encapsulate the vlan across that link, you won't be able to use routed interfaces. You will need to use a layer 2 trunk(dot1q). Therefore, I wouldn't bother with the /30 addresses unless you want to monitor that specific link by IP. In that case, use a special VLAN just for those two interfaces and put your /30 addresses on the vlan interfaces.
If you want fast fail over on a layer 2 link, well then, use Rapid STP. The goal should be to get rid of those flat VLANs that span the core and switch to your original plan of routed interfaces using EIGRP or OSPF. -
All of the QOS configuration guidance I've seen in the documentation on this website refers to 6500 switched interfaces (switchport mode access/trunk).
Is the QOS configuration different on a 6500 routed interface. For instance on an interface between two core switches in a routed (Layer 3) core?
I have already reviewed all of the IOS-related 6500 Cisco documents I could find, and the latest QOS SRND with no luck finding info on this issue.
Thanks
GregThis URL should help you:
http://www.cisco.com/application/pdf/en/us/guest/products/ps708/c2001/ccmigration_09186a00801a90cc.pdf -
Hi All,
I am new to Oracle Apps.
Kindly let me know ,is there any document to process to do the Routing conversion.
Any document with sample code will be of great help.
Thanks in advance.
RamyaRamya,
Please take a look at Doc ID: Note:131898.1 which describes about BOM and Routing Interface with sample code.
Thanks,
Sudhakar -
I have 2 3750G-24 as the core of my voice/data network. I have 2 vlans (voice,data) and it seems like when I cross the routed interfaces (virtual vlanX interfaces) I lose my qos tagging. I have tried route-maps and policy maps but they are not working (the policy maps are not supported on virtual interfaces)
Anyone with a solution?? I have searched cisco.com and unless i am blind, have not found what I am looking for.Here is the edge switchport config-
End user port-----
interface FastEthernet0/1
switchport access vlan 50
switchport trunk encapsulation dot1q
switchport trunk native vlan 50
switchport mode trunk
switchport voice vlan 10
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
wrr-queue bandwidth 20 1 80 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree portfast
Gigabit uplink port------------
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
mls qos trust cos
auto qos voip trust
wrr-queue bandwidth 20 1 80 1
wrr-queue queue-limit 80 1 20 1
wrr-queue cos-map 1 0 1 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
end
Here is the core switch-
interface GigabitEthernet1/0/24
switchport trunk encapsulation dot1q
switchport mode trunk
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust cos
no mdix auto
auto qos voip trust
end
Core Vlan Interfaces----
interface Vlan1
no ip address
interface Vlan2
description Data Vlan
ip address 10.199.0.29 255.255.252.0
interface Vlan10
description Voice Vlan
ip address 10.199.10.1 255.255.255.0
All of the qos settings are a result of using Auto QoS -
Limit traffic on router interface
Dear all,
how can i limit Upload/download bandwith on router interface.
please help me
thanks with regards
vikas kumarHI,
You can police the traffic in ingress/egress but the support may depend of your hardware. Please refer to the following link for more information:
http://www.cisco.com/en/US/partner/docs/ios/qos/configuration/guide/polcing_shping_oview_ps6350_TSD_Products_Configuration_Guide_Chapter.html
HTH
Laurent. -
Hi,
Is there anyway to create redundant inerfaces on a single router?
Essentially, what I am trying to do is to imitate HSRP but on a single router.
Whenever you try to add a second interface that exists within the same network as an existing routed interface, the IOS will prevent it.
Can you use Bridge Groups? Or maybe something funky with secondary interfaces?
Other suggestions?Hi
i feel u need something line with backup for ur primay interface .. if yes have u tried backup interface option in ur router ??
if not can you look onto that option and check whther it fits onto ur requirement??
regds -
Router Interface Cards - Routing Feature
Dear Team,
I have a Cisco 3945 Router and have all the slots available with me. The interface card that I am looking for should have the same functionality as HWIC-2FE.
I need a 4 or 8 port Routed Ethernet Card. I looked for "VWIC3-4MFT-T1/E1" interface card as I was unable to find 8 port card.
Please let me know if this card can be used as a Routed Interface Card (I need to terminate different ISP Links on this card).
Regards,
Farhan.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Believe the module you mention provides serial ports, not Ethernet ports. Also believe it supports routing.
Higher density Ethernet cards often support routing via VLANs (you can dedicate a VLAN per port), but not as routed ports.
What you also do, if you have VLAN capable switch, use subinterfaces on a router port to a trunk port on the switch. -
Router Interface (7304 NSE100) QoS Input Scheduling
Guys,
I had great feedback on the Switch input scheduling question last week. Many thx to all online (and my colleagues at work) :)
If you can apply input scheduling on a switch port, ie the SP or default queues, can you apply input scheduling on a router interface?
switch
input-q----------PFC----------output-q
router
input-int---------cef-or-rp----------output-int
At the moment, most QoS for a router is done (in my expreience) on outbound scheduling, ie setting a CBWFQ bandwidth or priority and setting this policy-map outbound on the router egress interface
Should we be doing it inbound for traffic coming into a router interface before the packet gets cef switched (or sent to the RP for process or fast switching)?
So if two packets come into the router interface at the same time, based on a DSCP value, we should schedule a voice packet to be processed by CEF switching (or the RP) before an email packet?
I am just applying the switch methodology that I learned about last week to a router device. I know all routers have different archetectures, so will probably be spefific to a platform. I am using NSE100s (PXF based) on a 7304 platform.
Kindest regards,
KenJust to add i picked this from some site
GSR:
Engine 0: (Quad STM-1 POS/ATM, single STM-4 POS/ATM and others)
Engine 1: (single GEth, 8 FEth, DPT 2XSTM-4)
Engine 0 and 1 support CAR in sw; MDRR: in Engine 0 in sw
Engine 2: STM-16, Enhanced Quad OC-12/STM-4 Packet-over-SONET/SDH - 4 ports, MPLS-capable -, 8 and 16 STM-1, 3 GEth, Enhanced OC-48/STM-16 Packet-over-SONET/SDH.
no support of CAR, PIRC in hw instead; WRED in hw; MDRR in hw
(See also Quad OC-12/STM-4; Rel. Notes 12.0 S )
Engine 4: speed greater than 2.5 Gbps,
CAR, WRED, MDRR in hw
Note: no class-based shaping on GSR
But it supports DTS
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a00800811e5.html
Tuf luck but hope this helps -
Configuring 2 Router Interfaces to the same subnet
Hi There,
I have the following setup: Border router which has a serial interface connected to the ISP and 2 internal FE interfaces which need to be connected to 2 different switches in the LAN-side for redundancy. Of course, the 2 FE interfaces should have addresses from the same subnet; but when I try to assign those interfaces different IP addresses from the same subnet an error message reading Overlap in IP addresses appear to me.
The question is how can I assign the 2 interfaces different addresses from the same subnet to achieve redundancy? Thanks!
Regards,
Haithamhi Haitham
on the following link you can find configuratiion example.
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094663.shtml
remember to rate the post if it helps
regards
Devang -
Static MAC for a router interface
I have a Cisco 851 router that is setup as a VPN device. I have a managed switch connected to an interface on the 851. I want to be able to assign a static MAC for the paticular interface so that the connected switch is the only device allowed to connect to that port. However, the router must still be able to learn and pass traffic from MAC addresses of devices connected to the switch. Is this possible?
Interesting, thanks for the report/tip!
Maybe you are looking for
-
Should I do a clean OS install after buying second hand MacBook?
I just bought a second hand MacBook 2010 for my girlfriend. It came with a clean Lion installed. What is making me paranoid is that I use tracking software Prey on my own MBP and now how can I be sure that the new one hasn't got tracking software ins
-
I am trying to record tv shows on-line. I go to tv listings and click on a show but the 'record' and 'record series' buttons do not appear. I just installed FIOS 3 days ago with DVR service. Do I need to activate or register the DVR somewhere? T
-
hi, I want to convert SAPscript to Adobe PDF format and also want to store that PDF file to my local drive. I dont want to do it by program RSTXPDFT4. it should generate the PDF file automatically. If any one knows please help me.
-
Trace the reference Standard movement type from customized movement type
Hi, In my system there are few customized movement type. Can I know which Standard movement type was used as reference to create the customized movement type.
-
What is the easiest method to convert your Outlook Mail from MS Office 2011 for Mac, into Apple Mail?