Routing Issue between router and Access Server

Hi,
We have a Lucent MAX TNT access server, having TAOS version 9.0.9. I
have configured
the default route so that all dialup user traffic is diverted towards
cisco 2611 series router but this
only happens with the IP subnets configured on MAX TNT and cisco router
ethernet interfaces.
We need a solution in which dailup users on MAX TNT with IPs from any network can
be routed towards the cisco router in order to reach the internet cloud accross the Router.

Muhammad
Your message states that you have configured the access server with a default route pointing to the 2611 router. But it does not say whether you have configured a route on the 2611 pointing to the access server for the address range used by the dial pool which the access server uses to assign addresses to dial up users. I suspect this is your problem. I believe that the 2611 needs a route to that address space and that the 2611 needs to advertise that address range if there are any other routers in your network.
HTH
Rick

Similar Messages

Data type conversion issues between Oracle and SQL Server

Hi there, I am using Heterogeneous Services to insert into a SQL Server database. I am running into an issue between data types regarding Oracle's VARCHAR2 and trying to insert that into a SQL Server MONEY data type. I tried using the TO_NUMBER() function to convert my VARCHAR2 to a number, but that didn't seem to help.
Does anyone have any advice on how to work around this??
Thanks for any help,
ivalum21

ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "MY_PACKAGE_NAME", line 263
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_Execute: DB_ODBC_ENGINE (1645): ;
[Microsoft][ODBC SQL Server Driver][SQL Server]Disallowed implicit conversion
from data type varchar to data type money, table 'tableA',
column 'total_amount'. Use the CONVERT function to run this query. (SQL
State: 37000; SQL Code: 260)
ORA-02063: preceding 2 lines from SQLSERVER_LINK
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 875
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 791
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 1156
ORA-06512: at line 1
That is what I get when I take out the TO_NUMBER()
Message was edited by:
ivalum21

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Question about transfer between oracle and sql server

Could i program to transfer lots of data between Oracle and SQL Server quickly?
I have tried make two connection between two databases, but it took me lots of time to transfer data.
How could I do it?
Thanks

Hi,
If you need to move data fast, then use the Oracle Migration Workbench to Generate SQL Server BCP data extraction scripts and Oracle SQL Loader files.
This is the fastest way to migrate the data.
In the Oracle Model UI tab of the Oracle Migration Workbench, right mouse click on the tables folder. there is a menu option to 'Generate SQL Loader ...' scripts. This will help you migrate your data efficiently.
Regards
John

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Database link between oracle and sql server

dear all,
i m a newbie to oracle and i need your help to know how to create a database link between oracle and sql server.my oracle version 10.2.0.3 and platform is redhat linux 5.7.your help appreciated.
thanks in advance.

[oracle@localhost ~]$ rpm -qa | grep -i odbc
php-odbc-4.3.9-3.15
unixODBC-kde-2.2.11-1.RHEL4.1
MyODBC-2.50.39-21.RHEL4.1
postgresql-odbc-7.3-8.RHEL4.1
freeradius-unixODBC-1.0.1-3.RHEL4.3
qt-ODBC-3.3.3-9.3
unixODBC-devel-2.2.11-1.RHEL4.1
unixODBC-2.2.11-1.RHEL4.1
is this showing odbc installed in os?

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Shared file system between Int and ext server(DMZ) in R12.1.3 for iRec

Dear Friends,
we are using R12.1.3 and we planned to use iRec module.
so we decided to go with External web tier and it will be placed in DMZ for external users.
Is it possible to have shared file system between internal and external web server when external server is in DMZ?
Is it safe to go with shared application Tier file system between internal and external server (or) to have seperate file system in externel web tier?
Regards,
DB

Take a look at Note 380490.1 DMZ Deployment for R12.
Also For Specific Load balancer 727171.1 Up to 12.x but alot of the information is still usefull based on hardware loadbalancer
Also Note 1309013.1 has some good information on SSO/OAM Intergration with E-Business Suite

What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Time Capsule as DHCP Router and DNS server for larger network - too taxing?

Ok, let me say first that I'm no networking expert, but I have tried to learn a decent amount over the years. I haven't got quite gotten o the level of combing router event logs, though I intend to do that as my next step. My question here though is if my overall network strategy is flawed.
My setup at home is one that may be a bit more extensive than most users have:
Cable modem -> Time Capsule -> Multiple gigabit switches (business grade) -> Wired Cat5e throughout the house and 2 Airport Extremes. I don't know how many total wired and wireless clients I have, but it may be between 30 and 40 (only a few are computers with the rest being game systems, networked DVRs, audio streamers, NAS, etc)
At the moment, the Time Capsule only backs up one machine - a MBP (I have external HDDs connected directly to the desktops). I don't use the TC's HDD for anything else. Also, I have the network configured so that the TC handles DHCP addressing and NAT. The Airport Extremes are in bridge mode.
For the most part, everything works very well. Internet speeds are good, audio streaming works well, no problems with TC backups, etc. The only issue I've run into are dropouts when streaming video content on the network from one device to another (not form the internet). Basically, the stream will pause and then an error will pop up on screen saying that there was a network problem. Now, I know that the specific devices themselves may have issues of their own, but since it's happened on more than one system, I'm wondering if there is a common network culprit- expecting the Time Capsule to handle its duties especially while it is doing a backup.
Here are a few thoughts I have:
1 - From a technical standpoint, I don't know if all client to client network traffic goes through the TC. I was thinking that communication could happen between devices on the same switch without having to go up to the TC and then back down, but maybe I'm wrong. If I am wrong, that certainly is a bottleneck right there. I'm not segregating the video streamers to their own subnet on a new router to isolate the traffic. I'm also not sure if the bottleneck is impacted by static vs dynamic IP addressing. IOW, I don't know if setting the devices up with static IPs would change the flow of traffic to not have to go through the TC (just flow across the switch) or not.
2 - Long ago in a different network setup, I had allowed the wireless access points to assign IPs. However, I found that doing so sometimes created problems accessing some of those devices from a computer or device on a different subnet. As such, I switched over to having the router connected to the modem do all the IP addressing. Maybe this is a bad idea given the temporary nature that some devices will hop on and off the network.
3 - Additionally, in the interests of getting better wireless coverage over the whole house, I switched to using 2 airport extremes configured to use the same SSID (so that devices moving around the house wouldn't need to specifically change networks in order to get better signal). I guess I could let one of those 2 handle IP addressing while the other is in bridge mode (pointing to the primary Extreme vs the TC).
4 - Kind of getting back to the TC as the bottleneck, maybe it shouldn't handle network wide DHCP and NAT duties. If TC backups take network priority, such that other kinds of traffic could hiccup, then I probably need to rethink where the TC should exist in the network. Or, maybe it would be enough to just have the stream sensitive components be on their own subnet.
I know there are potentially multiple flaws in my current strategy, so any suggestions or attempts at correcting my assumptions would be helpful.
Thanks!
Jeff
Message was edited by: Rgbyhkr
Message was edited by: Rgbyhkr

Welcome to the discussions!
1 - Everything goes through the router when it is setup to handle DHCP and NAT
2 - You want your main router, the TC, to handle all DHCP and NAT functions. It will handle up to 250+ connections, so 30-40 devices won't be much of a challenge
3 - Keep both AirPort Extremes in bridge mode to allow the TC to handle the things in #2 above. If you setup an Airport Extreme to give out IP addresses, you'll create a Double NAT issue on your network...which can slow down communications between devices...the thing you are trying to avoid. If you use Xbox live or other interactive services, the online features will not function with a Double NAT on your network.
4 - You want the TC to handle all DHCP and NAT functions as in #2. I assume that you have no single run of CAT5e more than 300 feet.
5 - If you want to create separate sub nets correctly (the AirPorts won't allow you to do this as they are designed for basic home networking), you'll need to look at routers for professional and commercial use, like Cisco.
With as many devices as you have, you may be running out of bandwidth at times. If you only notice the issue during Time Machine backups, and you don't need to backup each hour, take a look at Time Machine Editor to setup backups whenever you like, maybe once a day at 2 AM when things on the network are quiet.
My suggestions are of course opinions. Hopefully you'll receive some other possibly differing views.

Router and access point

Likely either or. Of course if you "need" wireless you have to have an AP somewhere and many of them are capable of serving up DHCP and doing many functions of a small broadband thingy (I won't call these things "routers", "thingy" seems more appropriate) :)

which one i should use a router or access point to create a home network lab where i can play around with the DNS and DHCP configuration without changing the ISP router setting??
This topic first appeared in the Spiceworks Community

Router and access point connected to FIOS router

Here's my situation. Just installed Verizon Fios which supplies their own Actiontec Wireless router. I have an existing network which comprises a WRTG54Gv6 which was connected to a DSL modem for internet access originally and a WAP54G accesss point as a Repeater to extend the network wirelessly. I have quite a few wired and wireless connection to this netwrok and wish to retain these devices. My question is, based on where I had to connect the new FIOS router(which is where the access point is) can I connect the WAP54 to the FIOS router(through a switch) and allow the combined WAP54/WRT54G network to still provide my network services and deactivate the wireless service from the FIOS router. How do I configure the FIOS router, the WRTG54 and the WAP54(if change neded).
Thanks in advanced if anyone can help.

Easiest way to configure the Verizon FIOS with Linksys is - Leave the Verizon FIOS unplugged from the Linksys Router and disconnect it's power cable.
1. Connect a computer to the Linksys Router it's Internet Port...
2. Access the web interface of the Linksys Router, change it's default address to 10.10.10.1 and leave it's DHCP Server Settings 'Enabled'. Once done you should Power cycle the Linksys Router.Don't change the Router Mode.
3.Connect Verizon FIOS from it's Ethernet Port to the Linksys Router on the Internet Port.
4. See if you can access the Internet...
You can also have a look at this link to connect two routers.However, both the router's used in the link are linksys routers but you can still follow the link.

My router and access point reboots when trying to stream content from iOS devices or mac to my apple tv.

the zycel N series access point and cisco router reboots when i try to stream or mirror onto apple tv using air play. What can be the cause of the problem?

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Routing Issue between router and Access Server

Similar Messages

Maybe you are looking for