Routing long text-reg

Hi,
Is there nay table to see routing long text field for the multiple material

Dear,
Please refer these threads,
Table for routing operation text?
Re: Long text indicator
Regards,
R.Brahmankar

Similar Messages

Routing long text editor change

Hi,
When we go to Routing long text and try to open it, it will open one word document.
My requirement is, I want to change that word document as Notepad (text editor) for particular user.
Please tell me is it possible to change that word doc to text doc, If yes then how to make settings?
Regards,
Chetan

Hi Chetan,
Even I have the same problem ! I had raised a SAP ticket & waiting for the response...
Now can tell me how/what should i do to change to get a particular editor???
Awaiting for your response..
~Guru

Standard LSMW to load Routing Long text

We are migrating data to sap for Routings. We are using SAP best practices to load the data into sap using idocs. But we dont have idoc structure to load Long Text.
Do you know a LSMW standard direct input to upload the routing long text.
Please help me out.

Yes, you can upload long texts to pretty much any application, routings, boms, material masters, etc.
In LSMW select the following direct input method:
Object               0001   Long texts
Method               0001   (No selection)
Program Name         /SAPDMC/SAP_LSMW_IMP
Program Type         D   Direct Input
You can define the following as constants in field mapping and conversion rule.
TDOBJECT C(010) Text: 'ROUTING'
TDID C(004) Text ID : 'PLKO'           <<< if you're uploading to header
TDSPRAS C(001) Language : 'EN'
TDFORMAT C(002) Paragraph format for text line : '*'
If you want upload to operations etc look at the following table
ROUTING     PLFH     Long Text
ROUTING     PLFL     Long Text
ROUTING     PLFT     Long text
ROUTING     PLFV     Long Text
ROUTING     PLKO     Long Text
ROUTING     PLPH     Long text
ROUTING     PLPO     Long Text
internally SAP stores, routing group with zeros padded on the left. For example if your routing group is 200 it will be stored as 00000200 so in your flat file either you have to pad the zeros or in the LSMW you need to use the conversion exit function module.
You can following link below if you want to deeper understanding on this subject.
Re: LSMW : Long text not visible after the import of data

Routing Long text not populated using LSMW

I need help with the ROUTING LONG TEXT using LSMW. I'm using the standard LSMW direct input program /SAPDMC/SAP_LSMW_IMP . I'm confused with NAME field while loading the data. I have tried to create the routing long text manually after successful creation i opened the Longtext at header screen and opened GOTO--> HEADER there i have seen TEXT NAME is constructed based on CLIENT || N || GROUP || GROUPCOUNTER || INTERNAL_COUNTER (CLIENT||N||PLNTY||PLNNR||PLNAL||ZAEHL - field names) I used the same logic to construct the test data for another routings which were created and doesn't have the long text. I have run the lsmw program and executed successfully but when i open the routing in CA03 i dont see the long text populated.
Test data used looks like this:
OBJECT NAME TDID SPRAS TEXTFORM TEXTLINE
ROUTING N500000890100000001 PLKO E * THIS IS A TEST1
ROUTING N500000890100000001 PLKO E * THIS IS A TEST2
ROUTING N500000890100000001 PLKO E * THIS IS LINE3
ROUTING N500000910100000001 PLKO E * LONGTEXT1
ROUTING N500000910100000001 PLKO E * LONGTEXT2
My question here is do i need to construct the NAME as i have mentioned above or do i need to just send the Routing Group number into the file for the NAME field. Help me understand what do i need to populate into NAME field.
Please help with the mistake i have done.
Pretty much appriectiated for your replies.

You asked the same question in two different forums multiple times:
Standard LSMW to load Routing Long text
Re: LSMW : Long text not visible after the import of data
Please use same one thread for one question.
I gave you most of the needed information assuming you know how to do LSMW in the first thread itself.
You need to have the following fields in your source structure in addition to other fields like long text
MANDT
PLNTY
PLNNR
PLNAL
ZAEHL
In the step Maintain Field Mapping and Conversion Rules assign the source field MANDT to the variable NAME and then again place the cursor on the variable NAME and assign variable PLNTY, (now you have two source field assigned to same variable) similarly assign all the remaining 3 source fields PLNNR, PLNAL, ZAEHL. (now you have 5 source field assigned to same variable).
Now select the variable NAME by placing the cursor click on Rule (Insert Rule) and select the radio button Concatenation .
Make sure that in your input file you have leading zeros for PLNNR PLNAL and ZAEHL etc. like below
50000089, 01, 00000001
Also, you don't need maintain the value of OBJECT, TDID, SPRAS, TEXTFORM as source fields. You can directly maintain them as constants in Maintain Field Mapping and Conversion Rules by click on the push button Rule .

Comma in long text of routing comma is appearing sepecial character

Hi Experts,
When I am trying to insert comma in long text of routing comma is appearing as sepecial character like <<,>> in long text preview. Please advice how insert comma.
Regards,
Sandy
Edited by: Sandy2 on Apr 20, 2011 10:30 AM

Try to use Line Editor instead of GUI editor ie
from long text screen Goto--> Change Editor and try
a®

Printing long text from Routing instead of Production order for an order.

Hi Gurus,
When a production order prints it is printing the long text from the routing master rather than the long text on the actual production order.
This field is used to provide specific instructions in special circumstances in addition to the standard text.
I need system to be changed so that printing takes long text from production order.
Please help me.
Naveen.A

Hi,
In the production order long text, the text we are maintaining is only for information. It can't be able to print. In Production order, copies all the masters and the texts which we are maintaining in the masters only will be able to print. Standard SAP will not print the production order long text.
Regards,
V. Suresh

Reg UD long text

Hi,
Please let me know which table to be seen to get the details of longtext in Usage decision, we can see in QAVE but here we will only know that long text is there but we will not get what is given in long text.
Regards
Venkat

Hi,
You can use function module READ_TEXT with text ID = QAVE and text object = QPRUEFLOS.
Regards,
Roderick

Reg sap script long text

Hi experts,
I have one problemin bseg-sgtxt field. i develop sap script for payment print prog, In my script my field is bseg-sgtxt(item text). and this field lenght is 50 char. i want more then 50 char through this field in my script. for that i use long text button... this long text stored in EENO_DYNP and field name is ZEILE , but it is a structure...so my question is
1) How can i retrive this long text field in my script
2) Can u give me example with this coding..
3) How can i concate bseg-sgtxt with EENO_DYNP-ZEILE
I need code example for that....
Pl help me its urgent
zeni

hi,
the long text of a document are stored into the standard text table and u can read it with the function READ_TEXT.
call this function in this way
>CONCATENATE bseg-bukrs bseg-belnr bseg-buzei INTO name.
>CALL FUNCTION 'READ_TEXT'
> EXPORTING
>    id                      = '0001'
>    language                = sy-langu
>    name                    = name
>    object                  = 'DOC_ITEM' " identified FI document
> TABLES
>    lines                   = t_line
> EXCEPTIONS
>    id                      = 1
>    language                = 2
>    name                    = 3
>    not_found               = 4
>    object                  = 5
>    reference_check         = 6
>    wrong_access_to_archive = 7
>    OTHERS                  = 8.
the id of the text you can find in SPRO transaction under
Financial accounting->Financial accounting Global Settings ->Document->line Item-> Define Text Identifications for Line Items
here you can find all ID of the standard text that are configurated in your system.
now you can concatenate BSEG-SGTXT with the standard text of the document item .
bye
Marco

Reg how to retrieve long text

actually the requirement is given below , am stuck at fetching long text ......can anybody help me in retrieving the long text(suppose two or three lines) into single variable and passing it to read_text function module as per the condition
Plz reply ASAP............
i need to combine data from two tables n also add long text field in to the final internal table.
requirement is
IF QPMK- LTEXTKZ = u2018Xu2019 then Fetch the Long Text as
Language = P_SPARCHE,
TEXT ID = u2018QPMTu2019
Text Object = u2018QPMERKALu2019
Text Name = QPMK- MANDT + QPMK-ZAEHLER + QPMK-MKMNR + QPMK-VERSION + Language (single character)
Combine Values in a single internal table such that the table has only QPMK-MKMNR, QPMK-SORTFELD, QPMK-DUMMY20, QPMT-KURZTEXT, QPMT-LTEXTKZ, Long Text

hi abap_sap leaner,
try to avoid using + for combining multiple fields, instead use concatenate and then pass to text name,
then u have to loop line table(which contain long text) and store each value from the loop in a variable of length 1500.
pls refer the following,
hd_name = p_ebeln.
call function 'READ_TEXT'
    exporting
     client                        = sy-mandt
      id                            = 'A01'
      language                      = sy-langu
      name                          = hd_name
      object                        = 'EKKO'
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
   importing
     header                        = header
    tables
      lines                         = hd_lines
   exceptions
     id                            = 1
     language                      = 2
     name                          = 3
     not_found                     = 4
     object                        = 5
     reference_check               = 6
     wrong_access_to_archive       = 7
     others                        = 8
here u have to loop hd_lines and store hd_lines-tdline values in a variable for every time the loop executes....
finally the variable contains long text..
hope it will help...
regards..

Find a word in long text

Hi,
I need to find all the routing cards that don't contain a certain word in their long text. any suggestions???
Eti

Hi
Please check in following links.....you will find some solution.
How to search for a word in a text editor
Search in long text
Word Search
search word for '.'.
Regards
Sujit

How to print long Text & No of page settings in F-58

Dear Gurus,
Can anybody guide me reg. below:
01. user want to print long text also along with document.
02. When user printing F-58 Payment advice..where we can set no of pages
Pls guide me.
REgards,
Venkat

Hi,
a. Display Document FB03 and change current layout (Ctrl+F8) and choose GL Long Text (SKAT_TXT50).
Rgds.

How to download and upload long text for project, WBS , Network,

Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.

I don't think there is any BAPI to do it.
We are doing it by read_text & edit_text . required fields for text name can be fetched by following select
if not e_activity[] is initial.
    select aaufnr aaufpl baplzl bobjnr b~vornr
      into corresponding fields of table t_longtext
      from afko
        as a
    left join afvc
        as b
        on aaufpl = baufpl
       for all entries in e_activity
       where a~aufnr = e_activity-network
       and a~aufnr is not null.
endif.
      txtname = wa_longtext-objnr.
      replace c_nv in txtname with sy-mandt.

Long text not displayed in outpur of adhoc query

Hi,
I am trying to run an ad hoc query in which i need the Org unit long text in the output.
When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short text only.
Could you please suggest what changes i need to make to the infoset to view the long text of the Org unit.
elp will be highly appreciated.
sushil

The help text does not say that this is the case for routings (and I dont know it either as I never loaded text for routings).
Of course you can read your text with the function module, as you enter the keys like you done it to load the text.
But this is not a proof at all.
In 90 % where the text does not appear it is just a matter of the used key. maybe forgot to have leading zeros in the name field.
Best you enter a text manually in a route, then you use SE16 with table STXH to find this record, and then you compare the key fields of this record with the key fields of a record you created with the upload.
if this is all okay, then it might have to do with a text indicator in the normal tables of the routing.

SAVE TEXT not updating the database for Recipe Operation Long Texts

Hi,
We are trying to update the Recipe Operation long text using the FM SAVE_TEXT.
The FM is not throwing any error, but the changes are not reflecting in the database.
Text ID: PLPO
Text Object: ROUTING
Language: EN
Text Name: Concatenated string of ARBPL,PLNNR,OPRATIONCOUNTER
If someone faced similar scenarios, please share your inputs.
Thanks in advance,
Anand

After some more R & D, i got to know that the Long Text indicator should be enabled to get the changes reflected in the C203 recipe operation details.
In C202, if you pass two text lines for Operation long text, this Long text indicator is automatically enabled and its a non editable field.
Can some one provide inputs how to enable this through program?
Regards,
Anand

Upload Task List Operation long Text using SAVE_TEXT-Urgent

Hi ,
I am trying to create Task List Operation Long text using the function module ..
SAVE_TEXT .I am passing the following keys
Text Name       300ATEST057 0000000900000009
Language        EN
Text ID            PLPO Long Text
Text Object     ROUTING    Texts for task list types
But the long texts are not getting updated in the Task lists operations .
Can anyone please suggest whether SAVE_TEXT will work for Operation long Texts or not Are we missing something
.This is pretty urgent requirement .Award points are assured.
Regards
Sam

hi,
use function module create text
check the sample code
DATA: BEGIN OF itab OCCURS 0,
      asnum LIKE asmd-asnum, " Service No
      text(5000) TYPE c, " Long Text
      END OF itab.
*DATA: itab1 LIKE itab OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF itab1 OCCURS 0,
      asnum LIKE asmd-asnum, " Service No
      sequ type i,          " Text Sequence
      text(5000) TYPE c, " Long Text
      END OF itab1.
To create Long Text lines for CREATE_TEXT function module
DATA:BEGIN OF dt_lines OCCURS 0.
        INCLUDE STRUCTURE tline. " Long Text
DATA:END OF dt_lines.
Variable declarations for CREATE_TEXT function module
DATA : dl_name TYPE thead-tdname, " Object Name
       dl_lan TYPE thead-tdspras. " Language
Constants
Object ID for Long Text of Service Master
CONSTANTS:c_best TYPE thead-tdid VALUE 'LTXT',
          c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
for file splitting.
DATA: start TYPE i,
      len   TYPE i VALUE 92,
      totlen TYPE i,
      n TYPE i.
PARAMETERS p_file LIKE rlgrap-filename."input file
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Start Of Selection
START-OF-SELECTION.
*To Upload Flat file
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = itab
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
LOOP AT itab.
    itab1-asnum = itab-asnum.
    CLEAR: totlen,n, start.
    totlen = STRLEN( itab-text ).
    n = totlen / len.
    n = n + 1.
    DO n TIMES.
      itab1-text = itab-text+start(len).
      itab1-sequ = sy-index.
      start = start + len.
      APPEND itab1.
    ENDDO.
ENDLOOP.
delete itab1 where text is initial.
SORT itab1 BY asnum sequ.
LOOP AT itab1.
    dt_lines-tdformat = '*'.
    dt_lines-tdline = itab1-text.
    APPEND dt_lines.
Call the Function Module to Create Text
    AT END OF asnum.
      dl_lan = sy-langu.
      WRITE : / itab-asnum.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = itab1-asnum
        IMPORTING
          output = itab1-asnum.
      MOVE itab1-asnum TO dl_name.
      CALL FUNCTION 'CREATE_TEXT'
        EXPORTING
          fid         = c_best
          flanguage   = dl_lan
          fname       = dl_name
          fobject     = c_material
          save_direct = 'X'
          fformat     = '*'
        TABLES
          flines      = dt_lines
        EXCEPTIONS
          no_init     = 1
          no_save     = 2
          OTHERS      = 3.
      IF sy-subrc <> 0.
        WRITE:/ 'Long Text Creation failed for Service No'(001),
        itab1-asnum.
      ELSE.
        WRITE:/ 'Long Text Created Successfully for Service No'(002),
        itab1-asnum.
      ENDIF.
      REFRESH dt_lines.
    ENDAT.
ENDLOOP.
in text file give first field records in capitals
regards
siva

Routing long text-reg

Similar Messages

Maybe you are looking for