Routing operation details printing

Hi Team,
I need to print the supply area (While creating work center in CR01, we will assign the supply area to the work center) information agains the each operation of the routing.
From which table we can extract this supply area which is assigned to a particular work center to print?
your valuable answer will be very much appreciated.
regards
psk

Hi psk,
I am not sure but you can check table P3000. There is field PRVBE (supply area) in it.
Also, check transaction code OP42.
Regards,
Rahul Mahajan

Similar Messages

  • Track Changes made in Routing Operation Detail

    Hi gurus,
    I need your help with Routings.
    We have a process where if a change is made into the Routing, we have the Change Master process and a Change number is assigned to this Routing.
    For example, if a change is made into the Description of the "Operation" into the Routing, I can see this change with transaction CA60 and CA61.
    But, if a change is made into the "Operation Details" i.e.:  change the labour data or the overlapping data (where before it was Required overlapping and now is No overlapping); this kind of change into my Routing is not showed in transactions CA60 or CA61.
    I checked that a changed was made because the "Changed on" field was updated and "Changed by" field.
    Then, I checked the tables CHDHR and CDPOS and I can see that a document was created with the changed that I did, but, it does not show the detail of my change (i.e. old value was: Required overlapping, new value is: No overlapping).
    Do you know where I can see that my change was made? Or, is it possible to track these kinds of changes into SAP? where and how?
    Many thanks for your time and your feedback will be very well appreciated!
    Regards,
    Sandra

    Hi,
    Look for the change history in change header and change positions.
    The tables are CDHDR and CDPOS.
    Regards,
    Renjith Michael.

  • Mass change in routing - operation details - machine times

    Dear all,
    I want to do mass change in machine times of aprox 20 materials in routing.
    So can anyone guide me for the procedure.
    Thanks.
    Edited by: sapsarang on Aug 19, 2009 1:39 PM

    HI ,
    As suggested by Mervin,better option is record in LSMW for CA02 transaction.
    For creating LSMW ,please refer the link which explain the step by step procedure.
    http://nabiljirani.com/SAP/SAP%20ABAP/SAP%20brain/LSMW_STEPS.doc
    https://wiki.sdn.sap.com/wiki/display/CRM/LearningLSMWStepbyStep!!!
    Hope it helps
    Edited by: Girish  Adaviswamy on Aug 20, 2009 6:59 AM
    Edited by: Girish  Adaviswamy on Aug 20, 2009 7:00 AM

  • User Specif Felilds in Routing operation details screen

    Hi Techies,
    Here I want some information regarding
    User Specific feilds:
    Here we can have
    4 - Text boxes,
    2- Value Boxes
    2- Quantity Boxes
    2-Indicators.
    Can any one explain the relevance of these feilds and how can they control the flow..
    Thanks in advance
    Regards,
    Kiran

    Hello Kiran,
    This user fields are information fields. They don't have any control parametes.Unless you want to influence the process by user exit or any other enhancement, this field are for information only.
    The data from this field can be viewed in production order and used in shopfloor docs(print). Orelse the other option was is to  use this in confirmation screen(with userexit) for additional information.
    Reg
    Samson

  • How to fetch Routing Sub Operation details

    hi all,
    I am downloading routing details from tables MAPL PLKO PLPO . But I am unable to find routing sub operation details.
    Could you all help me how and from where to retrieve the information
    Thanks.

    Routing
    <b>PLPO          Routing Operation Details
    PLKO         Routing Header Details
    MAPL         Routing Link to Material
    PLAB          Relationships - Standard Network
    PLAS          Task List - Selection of Operations
    PLMZ         Component Allocation
    PLPH          CAPP Sub-operations
    PLFH          PRT Allocation
    PLWP         Maintenance Package Allocation
    PLMK         Inspection Characteristics
    PLAH</b>
    Engineering Change Management
    AENR        Customer and priority
    AEOI          Revision Numbers
    Work Center
    CRHD         Workcenter Header Data
    CRCA         Workcenter Capacity Allocation
    CRCO         Workcenter Cost Center Assignment
    CRHH          Hierarchy Header
    CRHS           Hierarchy Structure
    CRTX          Workcenter Text
    KAKO         Capacity Header
    KAZY          Intervals of Capacity
    Bill of Material
    STPO          BOM Item Details
    STPU          BOM Sub Items (designators)
    STKO         BOM Header Details
    MAST         BOM Group to Material
    STZU          BOM History Records
    STAS          BOM Item Selection
    STPF           BOM Explosion Structure
    Line Design
    LDLH          Line Hierarchy Header
    LDLP          Line Hierarchy Items
    LDLT          Line Hierarchy Takt Times
    LDLBC       Takts/No. Individual Capacities per Line
    LDLBH       Line Balance Header 
    LDLBP        Line Balance Items
    LDLBT        Line Hierarchy Entry and Exit Takts
    PRT's
    CRFH          PRT Master Data
    CRVD_A     Link of PRT to Document
    CRVD_B     Link of Document to PRT
    CRVE_A     Assignment of PRT data to Equipment
    CRVE_B     Assignment of equipment to PRT data
    CRVM_A    Link of PRT data to Material
    CRVM_B    Link of Material to PRT data
    CRVS_A     Link of PRT Internal number to PRT External number
    CRVS_B     Link of PRT External number to PRT Internal number 
    Thanks
    Seshu

  • OPERATION DETAILS IN ROUTING

    Hi Experts
                  In the operation details of routing- CA01 there is control -either based on time or Quantity for every operation. What it mean. If time based is it denoting the time for the particular operation. What it mean if "quantity based " is preferred.Can I have details please.
    Also will you give a scenario with some operations mentioned where I can use routing.
    Pranav

    Hi Gajesh, Thanks
    I take your case - "Suppose you have 4 operation. Forming, lathing , quality checks and painting. Normaly in production system you will have a quality check in between the process".
    here check necessary in 3rd step - quality check. So am I to select time based / quantity based for operation -3 only ( because only it will have MIC ). Can I go without selecting time based / quantity based option also (if so how - what option i need select in the operation details for the 3rd operation). 
    Next, in CO11N. I confirm operation -1 ( here what option I hav to select - either partial confirmation / final confirmation). As per my logic, only partial confirmation need to be selected (what quantity I hav to enter here for yield- is it the total production order quantity = total target quantity).
    similarly, 2nd operation- lathing- I select partial confirmation- enter yield/scrap etc
    3rd operation is qc check- is it possible that production person will confirm this step in co11n itself without waiting for the qc person to confirm using QA32. ( here what yield to be entered and how if we use QA32 )
    4th -painting - finally ( as my logic goes -final confirmation selected and operation confirmed for the total production order quantity)
    Tell me if right. I noticed that if final confirmation option selected in the first operation itself, all the 4 operations can be confirmed in the co11n itself ( by selecting final confirmation option for all 4 operations)by the production department. Am i wrong somewhere. If this is so, how Qc person has control over the process.
    Also what yield /scrap quantity will be entered for each 4 operations in co11n ( is it mean the wastage occuring in each step =scrap and remaining quantity =yield). If so the final yield by operation -4 will be surely less than the production order quantity ( if wastage occurs during lathing/forming)
    regards,Pranav

  • Is there any option to maintain no of labours in routing operation wise?

    Hi Experts,
    I want to know the no of labours used to perform one operation.
    So is there any way so that I can know how many labours have been performed in one operation in routing?

    Hi,
    I'm having the same scenario.
    I maintained the formula for labour hours as
    Labour hoursno.of employees(Operation qty/Base Qty)
    No. of employees i'm giving in operation details.
    Actually i need to capture the no.of employees in actual also. If i maintain in standard value key, what is the impact will be happen. If i maintain in standard value key, i need to remove in the formula?
    Plz help me..
    Naren

  • Update required qualification in operation details for routings by LSMW

    Hi experts ,
    I have requirement to update required qualification in operation details for routings through LSMW.
    Is there any standard method which could be used to do the same.
    Please guide and help.Thanks in Advance.
    Regards,
    Jass Singh

    The locator which you put in the Routing Details screen are for Completion (Stocking) Subinv and locator. It has nothing to do with Backflushing.
    Now you can simply change the values as long as there are no new jobs created during the change.
    FYI you can always look at the jobs created during the day/period and see if the completion loctor values are correct from the Descrete Jobs form.

  • Routing operation split

    hi all,
    I have defined 2 splits in the work center. Operation split is ticked in routing.
    When I create an order for 10 units , it is getting split as 7.5 and 2.5. i would like to know where this proportion is defined if it can be ?
    Regards,
    Yogesh

    Yogesh,
    In the operation details you need to activate the Required Splitting indicator and maintain the minimum time for splitting, based on this system calculates the number of splits by dividing the processing time for the operation by the minimum processing time.
    Regards,
    Prasobh

  • Routing Operation Cost Relevancy blanking out

    We appear to be losing the cost relevancy on the operation detail screen in CA02 (routing updates). That is, when changing a routing other than the costing relevancy, the costing relevancy checkbox on the operation detail screen is changing from X to blank.
    Our logs do not show a change in this field so CA60 does not help. The problem is intermittent (translation we do not see the pattern).
    Has anyone experienced this behavior and if so, find a cause and/or solution?
    Thanks
    We are on ECC6 EHP3

    Refer OSS note - 430321, check if the symptom specified there matches with what you notice.
    If its not the case, then you might check back if it was caused due to some human intervention. If not then maybe you can log a call to SAP to have a look in your system.

  • Routing Operation item field update in configurable material

    Hi All
    Material is a configurable material ,which is having a selection options in a sales order and based on the selection options there is characteristics BOM quantity gets updated based on the formulae.
    If you go to routing and double click on the operation to see the details , you will see the unit of measure conversion with the header and Operation fields. I want BOM quantity should get updated in the operation field (UMREN).
    I was using the Reference characteristics with PLPOD table and UMREN field to update the value in the UMREN field. And i created a procedure with a logic and is assigned to configuration profile and the Routing operation.
    Process is MTO process, Production order is generated when the sales order is created. i checked in production order after creating a sales order, UMREN field is not updated and dont know what where i am doing mistake and i also checked in the Routing Master Data there also its not updating.
    Above mentioned is not an requirement but to calculate the costs accurately, we have to approach this way.
    Please suggest.
    Thanks,
    Quantum

    hi all,
    this problem is solved...its was a simple thing...go to extra in operation tab of routing, then go to references and there is an option of unlock....
    and bingo...the problem is solved.
    best regards,
    Maulin

  • Operation number not holding in Operation details screen for WM6.2

    Hi Experts,
    I have added custom statuses to operation object in WM6.2. When I am editing the operation,Operation number is displaying in operation details screen header.But when trying to execute custom statuses, the operation number is not holding in Operation tile view header as in the below screen snap.
    Thanks in advance.Kindly suggest.
    Thanks & Regards,
    Sravanthi Polu

    Hi sravanthi,
    Just make sure that when you are editing operation object for custom statuses change you are editing same object that you are seeing in operation details screen.
    I think this problem is due to different/stale operation object that is being edited for when you are calling Operation Edit Transaction for change status for (custom statuses).
    I recommend to check your Target for Button , Action and Edit Transaction for this (is it same operation object that is being seen on detail screen/being edited for).
    Regards,
    AK

  • How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

     i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
                                                      ​      thanks
                                                      ​               p.h.thakur 

    That is not correct sabretooth04,
    The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
    The specifications can be found in here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en​...
    ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Need to select all equipments (PRT) for a plan (routing) operation (PLPO)

    hi,
    I need to select all assigned equipments (PRT) for a plan (routing) operation (PLPO).
    Can anybody tell me the database table relation or is there a function module or a BAPI or something like this !?
    Thanks
    Olaf
    Edited by: Olaf Krüger on Feb 20, 2008 12:03 PM:  BADI to BAPI

    I suppose you have every PLPO needed (else look at function module WOSTS_TASKLIST_READ_FROM_DB)
    Then read
    PLMZ Allocation of bill of material items to operations
    STPO BOM item
    SELECT * FROM plmz INTO TABLE t_plmz
        FOR ALL ENTRIES IN t_plpo
        WHERE plnty = t_plpo-plnty
          AND plnnr = t_plpo-plnnr
          AND plnkn = t_plpo-plnkn.
      SELECT * FROM stpo INTO TABLE t_stpo
        FOR ALL ENTRIES IN t_plmz
        WHERE stlty = t_plmz-stlty
          AND stlnr = t_plmz-stlnr
          AND stlkn = t_plmz-stlkn.
    Regards

  • BAPI to update Routing operations

    Hi
    I want to update inspection characterstics in routing operations,
    can you plz suggest any BAPI to update.
    Regards,
    kranti

    Hi Dhirendra,
      I want to update Char.number,Material Insp characterstics,method and sampling Procedure.
    as u mentioned in that BAPI,    BAPI_QPMK_SAVEREPLICA,i have found,Material Insp characterstics,method these two parameters,
    so how can i uplopad Characterstic no and sampling procedure?
    Regards,
    Kranti

Maybe you are looking for

  • A better way to deal with lost hyperlinks when converting Robohelp to Printed doc?

    I have inherited a 750-page manual that is "single-sourced" in RoboHelp X5. When I generate printed documentation, all of my hyperlinks and converted to plain text. Everytime we release a new version of the manual with any changes, we have to re-gene

  • No sound or wifi widget

    my z2 with lollipop has lost widgets of sound, gps, wifi, etc so I don't have direct access o direct button on screen to silence my z2 or turn on/off my wifi those buttons are essentials!!!!!

  • Is it possible to recover an apple i web site

    Is it possible to recover an iweb site that has disappeared in conversion to i cloud?

  • Problem with space label missing

    Hi everyone, We have an application which update one database from another one. And we found a strange things with label. When we have for example this label "Test ", it seems that the blank part is cut by the dataset and then we have "Test" without

  • Printing with Adobe Air and Flex

    Hi I have an Advanced printing application, developped using C++. we want to port it to the web; we are studying Flex and Adobe Air to see if we can have what we want. the most important thing is to be capable to print automatically I mean without ch