ROUTING TO MONO OUTPUT

Does anyone know if there's a way to route directly from a track to a mono output without having to use the pan knob. basically a mono track with no pan knob then...
the reason the do this as i'm mixing out of the box and each track is going out an individual output. would be great to not have to use the pan. the way you can do it in PT....
any ideas?

try this
http://discussions.apple.com/thread.jspa?messageID=1721589&#1721589

Similar Messages

Logic 8 Mono Output

Hi Everybody!
I'm getting crazy to find out how to get mono output on my tracks.
Basically i need to send mono outputs to my SSL matrix, to be able to use its sum engine.
I don't feel comfortable using the pan pot on the stereo outputs...
Is there a chance that APPLE can solve this issue and bring logic to protools level?
Tnx!

patrizio wrote:
Hi Everybody!
I'm getting crazy to find out how to get mono output on my tracks.
Basically i need to send mono outputs to my SSL matrix, to be able to use its sum engine.
I don't feel comfortable using the pan pot on the stereo outputs...
Is there a chance that APPLE can solve this issue and bring logic to protools level?
Tnx!
Unfortunately, there is no easy way to get a Mono output from Logic.
You kinda have to pan the stuff into a stereo output.
Yay... not.
This is why most of my final mixes I am doing on Pro Tools HD. Easier to set up routing, and no chance of it mistakenly getting changed by a pan pot.
Now, all you PT haters out there, join the party and bash me... thhhpthhhtp!!!

Routing of counter output

Using LabVIEW 2009, I'd like to route the output of ctr0 to several PFIs. I've reviewed many of the posts, but I'm still a little confused on how to route to multiple outputs.
It seems there are three possibilities - DAQmx Connect Terminals, DAQmx Export Signal, and DAQmx Channel property node.
Is it possible to route a ctr0 pulse to multiple outputs? If so, which of these options is best? (I assume I would make multiple calls to the Connect Terminals or Export Signal) Is there a limit to the # of outputs I can drive with a ctr0 signal?
Thanks.
Solved!
Go to Solution.

Hi rls,
The easiest way to accomplish this is to use the DAQmx Export Signal VI. You can route the signal to multiple routes by selecting to Browse... rather than selecting a single PFI line and then CTRL+Click on the routes to be made. I was able to do this on a PCI 6251 M-series multifunction card without any issues.
Best,
Adam
Academic Product Manager
National Intruments

Why won't Logic let me do a mono output?

I've done everything in the book. I can't get Logic to give me just a single analog output for a mono audio track. Even switched the main analog outputs in the Environment Window to mono and created the extra mono tracks for Output 2,4,6,8. Logic tech support says just Pan your audio channels to the L or R, thus forcing a mono output. Thats a nice trick Logic tech support but a **** Professional Audio Workstation should have the simple option of a freaking mono output don't ya think!!!!
Ok i'm done venting... let me know what you all do for a mono output. My interface is a Rosetta 800 if that is part of the problem. Thanks everyone!

I've done everything in the book. I can't get Logic
to give me just a single analog output for a mono
audio track. Even switched the main analog outputs in
the Environment Window to mono and created the extra
mono tracks for Output 2,4,6,8. Logic tech support
says just Pan your audio channels to the L or R, thus
forcing a mono output. Thats a nice trick Logic tech
support but a **** Professional Audio Workstation
should have the simple option of a freaking mono
output don't ya think!!!!
Ok i'm done venting... let me know what you all do
for a mono output. My interface is a Rosetta 800 if
that is part of the problem. Thanks everyone!
1. When you staretd Logix thefirt time did you run the Logic Setup Assistant so that it would create Outputs foir you or start with an included template so thatyou would have them?
2. On the Ouput object in the lower left hand corner you will see a symbol with 2 circles. If you click on it it will change to one. This is what the link that the responder above posted is showing you.
BTW, when I try new software that tons of people are using successfully and I cannot get it do do something as basic as this I reaact by thinking, "What am I not understanding about the program?" rather than "What is the matter with this p.o.s., how can they call it pro?"
Please allow me to suggest to you that it is a far more constructive way not only of approaching software but approaching life.

How to create a mono output from a mono aux send?

Trying to create a mono output from a mono aux send but option available is only a stereo output. Any way to force a mono output?

Yes - I'm aware of the mono vs stereo. Let me outline more precisely what I'm attempting to do. (By the way, I know this can be done as I do it easily in MOTU's Digital Performer.) The desire is to create a mono send inside Logic that I can then send out through my MOTU interface into a Lex 300 reverb unit. I then take the analog outputs from the Lex 300 and bring them back into Logic. I want the send to be mono as I am mostly sending from mono recorded instruments and voices. So chain would look like this:
Track 1
Send Bus 8
_Bus 8 Mono output_
MOTU 2408 Input
Patch Bay cable
Lex 300 Mono input ///
(now coming out)
Lex 300 Stereo Out
patch bay
MOTU Stereo Inputs 15/16
Logic Stereo Input 15/16
Mix.
The problem with the chain is that I cannot select a _mono output_ - it only allows for a stereo output. I can pan it one way or the other but it still does not seem to function correctly and toggling the mono/stereo button does not change the fact that this is still a stereo output. I hope this does not make it more complicated - it seems like there should be a simple solution. Any ideas? Thanks.

Can't send mono outputs from Logic 9 to my Motu Ultralite

Hi all, any help would be most appreciated. I want to send mono channels from Logic 9 to my Soundcraft mixer via my Motu Ultralite in order to try out some live dubbing. When I set a channel to mono nothing comes out of the Motu. I can make it work by panning things left and right but surely there is a better way?! I went through all the mono outputs but none seem to work.
Any ideas?
Cheers
Jamie

Work
I have a Powermac G5 at work and tried with the Mail Client and with Entourage. Both were successfull.
Home
My ISP at home is All2Easy.net, but I also recently signed up for MSN, I'm not sure if you can even set up the computer to send through MSN though. I have tried smtp.email.msn.com but can't get it to work (not sure if it is because I can't send anything, or if they are the wrong settings)
I have it set to "log-in requires authentication". The settings hadn't changed when the problems started occuring though. An interesting new development is that I can't connect through All2Easy anymore (I chose them for the price).

Stereo Record, Mono output

I have been recording voices through a Samson microphone on my pc (using Soundbooth CS4) and thought that I was recording in a stereo format, however I seem to be getting mono output. The only way that I can tell is by putting on headphones and hearing the recording (finished .wav) on one side only (the left).
What am I doing wrong and is there a way to correct what has already been recorded without re-recording it? I would like the stereo like render with sound coming from both headphones, etc..
Thanks

Sounds like you had a similar problem to one I just solved for myself. Your recording is coming out of only one speaker because it was recorded using only one channel in a stereo recording format. You have to change it to a mono recording. Here's how...
Under the "file" drop down, choose "Export" and then choose "Channels to Mono". It will save both channels of a stereo recording as single, individual Mono .wav files with a "L" or "R" designation for right or left channel. Simply keep the one with your recording on it and discard the other that will be blank. You can then keep the file as a .wav file or as I did, do a "save as" to create my desired .mp3 file (or whatever format you require).
This new file will now play as a mono recording through both speakers. Worked like a charm for me - hope this helps!

E-Mu Mono Output question

Sorrry but this whole patchmix business is confusing
Anyway, i plugged the Left Output of my E-Mu 1212m to a full range speaker, and so like u'd figure it acted as a left speaker..
i'm wonderng how you could change it to a Mono Output so my one speaker gets both Left and Right channels.
(without manual panning of course, i've found that you can't really get too "loud" without distortion)
any help would be appreciated

Hey,
As you only have one speaker, then you can plug one side of the output straight to it and you will get mono if it's from a mono source.
If it's from a stereo source coming into PatchMix (from ASIO or WDM etc), or Mono (from a mono in), then you need to centre pan it.
If it starts to distort, then turn down the mono-panned channel slightly, and turn everything else down until you get the balance back.
ATB,
~Jen~

How to make dual mono output from one mono track

Please forgive my complete ignorance of music mixing/sound board terminology: I'm only using Logic Pro X because Apple deliberately made it impossible to use Soundtrack Pro as part of a roundtrip with FCPx. Soundtrack Pro is what I've always used for editing audio for video.
I recorded two tracks with the video: microphone on the right and and lavalier on the left. The mic was just a backup and the lav track is what I want to use. I imported the audio into LPx and now I want to use only the left channel but I want it to output equally on both channels. I've searched all over for a simple explaination (at least one who is not a music editor can understand) and haven't found one.
How can I do this? Thanks.
Second question: I found the little icon that lets makes the timeline scroll to follow the playhead (ridiculous that FCPx doesn't have this) but I can only make it work for one clip at at time. Is there a way to turn it on permanently?

On the Channels Strip (of the Audio Track with the Audio Region), ctr+click on the left segment of the Input Button. That opens a popup menu where you can select Left (only the left channel of the Audio Region is played as mono), or Right (only the right channel of the Audio Region is played as mono).
Once the signal flow of the Channel Strip is mono (one channel), you can use the "Mono➤Stereo" version of some plugins to convert the Channel Strip to a stereo channel.
About your second question. If you are referring to the little blue "Catch Playhead Button", that automatically scrolls the Workspace when the Playhead reaches the right border to keep the Workspace visible. You also can also enable the "Scroll in Play" mode in the local View Menu. That one locks the Playhead in the center and scroll the Workspace "underneath"
However if you are referring to that little Play icon in the left upper corner of the Region Header (only visible in the Editor), that one, the "Solo Play Button", only plays that Region in solo mode. It is basically a combination of "Play " and "Solo" in on button. You can find all those little informations and much more in my graphically enhanced manual "Logic Pro X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Verizon G1100 Quantum Gateway router spurious 5Ghz output channel

Anyone seeing this situation? About a week ago I installed a new G1100 Quantum Gateway router without any problems. I have a desktop PC with a 5GHz WiFi adapter card and a Kindle Fire HD which use channel 149 at 5GHz. I also have an IBM Thinkpad using the 2.4GHz channel 11. The Kindle has a WiFi Analyzer app which allows me to view the activity on both 2.4GHz and 5GHz. Until about two days ago the WiFi analyzer and the Wireless Network Connection display on the desktop PC showed only one signal in the 5GHz band. Since then they both show two identical signals on channel 149 which have the same strength but different identification info. If I change the channel it just shifts both signals together. I spent almost an hour with a tech on live chat yesterday. He "looked" at the router and asked a lot of questions. He tried some things from his end with no change. He finally suggested doing a factory reset. I tried that today and still no change. I'm beginning too think I have a defective unit. The spurious output hasn't caused any problems so far but I find it very strange.

Since I posted the original inquiry, I have talked with Verizon tech people twice with no resolution. The last person agreed to send me another router. After a week or so it had not arrived so I inquired and the customer service rep couldn't find a tracking number. A second one was sent out and as luck would have it both arrived within a day or two of each other. So then I had three routers. I put one of them in service and got the same result, two signals on the same channel in the 5Ghz band. I then plugged in the other router but did not connect the FIOS cable to it, just let it sit there by itself. My WiFi scanner on the kindle showed only one signal at 5Ghz for this router and two signals for the router connected to FIOS. I then swapped routers, connecting the single signal router to FIOS and putting the two signal router aside. The WiFi scanner now showed two signals on the router which previously had only one signal at 5Ghz!!! The two signal router which was now not connected to FIOS still showed two signals also. Apparently, the routers initially have single signals when manufactured but FIOS software programs the device resulting in a different signal spectrum probably due to the security encoding algorithms utilized. By the way, depressing the factory reset button for 10 seconds or more does not return the router signal spectrum to a single signal. Also, I have not seen this characteristic in the 2.4Ghz band while using WEP encoding (my old laptop does not support anything else). The 5Ghz band uses WPA2.

80mhz reference clock to be routed to ctr output or pxi_trigger output

Hello Everybody,
If possible, I would like to route 6124 internal 80Mhz clock to any counter or RTSI outs. When I check daq card device routes on NI-MAX, I'm seeing that 80MhzTimeBase can be indirectly routed. However, I can manage to route it to Ctr1Source, for example, and I can't go any further. Please help me to get 80mhz clock as is from any outputs.
Thank you,

You really should be serious with you shift key when it comes to units and metric prefixes.
For the rest, propper use of the shift key eases reading!!
Have you tried a 1.2 MHz clock from a decent generator with a propper driver and cabling? My guess would be that the DCM PLL can't lock because of signal degration... routing clock signals isn't just a wire! (At least on a PCB board, in LabVIEW it's a different thing )
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

I want gnomeradio mono output

Hi, I'm using gnomeradio to listen to FM. I'm using a bttv card and it only has the ability to output stereo output. How can I convert it to mono, either by an .asoundrc or by another method? The bttv (card 1) is connected to my SB Audigy 2 Platinum's Analog-In port. Any tips, anyone?

Tried any of this http://alsa.opensrc.org/index.php/Talk:.asoundrc http://www.linuxquestions.org/questions … ke-815094/ ?
Last edited by karol (2010-07-27 15:15:07)

X-Fi Titanium only Mono output through Line-Out

Hi,
I have a problem with my x-fi titanium card. Since yesterday the output of the line-out is only mono. So the sound is always the same for right an left channel. I tried this in the mixer menue where you can test each channel if there is sound.
I already re-installed the newest drivers and changed PCI-E slot on my motherboard. The strange thing is in audio creation mode of the mixer I can see different amplitude for left and right channel of the output while testing.
After testing this whole thing I assume the amplifier of the card is broken and giving out the same signal to both channels.
Anymore suggestions?
regards,
Mik

are you using a mono cable with the card? Your card could very well be outputting stereo, and if you use a mono cable, you will end up with 1 channel sound.
Have you checked your mixer to make sure that you do not have the balance slider set to the left or right?

Mono output - can I use a mono mini-jack cable?

I'm outputting music mono from an iPad, to a mono system (Bose) currently using stereo mini jack output to twin RCA's with standard mono jack adaptors, this ties up two inputs on the Bose; can I simply use a mini jack mono from the Pad to standard jack mono cable (or even a mini jack mono to XLR)?
Sorry if it's a thickie question . . . . .

Yes. The iPod can connect with standard 3.5 mm plug

When issuing a 'show ip route' for a subnet which is not installed in the router's routing table, is it feasible to get the configured default route as the output/answer ?

I thought it was even recall I've seen this before but when tried a couple of days ago didnt get the answer I was expecting... tried to find some documentations but couldnt. Thanks for any clue on this.

Try show ip route 10.10.10.0 255.255.255.0 longer-prefixes
Hope it helps

ROUTING TO MONO OUTPUT

Similar Messages

Maybe you are looking for