Routing with change numbers.

Hello friends,
I'm trying to do the following. Can someone please explain what the problem could be
In routing creation, there is a problem.
Step:1 I enter the material number, plant and change number.
Step:2 Entered the usage(1) and status (4) in the header screen
Step:3 In the operations screen, I type in the work centre, controlkey, description and press enter
Now, the problem is activity types related to the work centre are not defaulted into the Activitytype fields..
However, if I don't put the change number in the initial screen and repeat the same process, it defaults all the activity types in those fields..
What role do you think the change number is playing? What could be the problem? We need to have the change numbers,so we can't avoid them. How do I get those activity types defaulted while having the change number at the same time? Is it I'm missing anything in the config again? Any ideas?
Many thanks
Shiv

Hi,
Check in work center if activity types are defined as parameter in Standard Value Key because activity types are copied from work center standard value key
Regards
Sunil Kumar

Similar Messages

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

RV220W - in routing mode changes external Ip with router IP

Good day.
I just installed one RV220W in my network, in routing mode (not NAT) using on WAN port public Ip 193.111.184.xxx and on LAN side on IP from my company public C class (212.100.143.0). It's working, but main ang huge problem is than Router is changing any IP coming from intenet with it's own 212.100.143.xxx IP, which mess up everything (logs, counters, etc).
It was using 1.0.1.0 firmware, I switched to 1.0.0.26 but nothing changed.
Also I have a VPN - gate to gate with another location (RV042), and all computers from other side of tunnel reports same router IP 212.100.143.xxx when accesing servers from my side, which also is bad.
Previously I user an RV082 for this joB and everything was great, except 100 Mb WAN/LAN ports of RV082, which I will use until get Rv220W working right.
Any idea is apreciated.
Thank you,
Catalin Burla

I have changed this weekend from a DSL using a Linksys by Cisco WAG54G2 to a Cisco RV220W Small Business Router and just found out the same problem. This is serious for me, for one, it completely destroys SPAM blocking with DNS blacklists.
This is how it looked when using the linksys:
Apr 9 03:18:17 vanroodewierda postfix/smtpd[49507]: connect from 189-041-10-204.xd-dynamic.ctbcnetsuper.com.br[189.41.10.204]
Apr 9 03:18:18 vanroodewierda postfix/smtpd[49507]: NOQUEUE: reject: RCPT from 189-041-10-204.xd-dynamic.ctbcnetsuper.com.br[189.41.10.204]: 554 5.7.1 Service unavailable; Client host [189.41.10.204] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=189.41.10.204; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<189-041-10-204.xd-dynamic.ctbcnetsuper.com.br>
This is how it looks when using the RV220W:
Apr 10 18:34:29 vanroodewierda postfix/smtpd[31608]: connect from ciscorouter.rna.nl[192.168.2.254]
And thus DNSBL is not possible. My RV220W uses One-to-One NAT to route one of the 5 outside WAN IP addresses I to the mail server on the LAN. Because I do not get the external IP address passed on to the inside, postfix has nothing to go on. I tried instead to use the normal port forwarding in the IPv4 rules on my main WAN IP address, but that doesn't help.
How and where can I report this and how long will it take Cisco to fix something like this? Because this is very important for me (and my users) and I'll have to return the router and buy another brand if it takes too long.

How can I make a column of sums out of a repeating pattern of 24 changing numbers

How can I make a column of sums out of a repeating pattern of 24 changing numbers in Numbers.
I have a long list of 8760 numbers of which I need to take the sum (and store in a column) of each 24 numbers.

Here's one way. I've reduced the example, taking groups of five numbers from a set of 20. I've used 3 as the data number in all cases to make the sum easily recognizable.
Original column of numbers in Data::column A.
Data::B2 (and filled down): =QUOTIENT(ROW()+3,5)
This adds 3 to the row number, then divides by 5, returning the quotient and ignoring the remainder.
The result is a 'group number' for each group of five rows.
Sums of each group are reported in the Sums table.
Sums::A2 (and filled down): =ROW()-1
Sums::B2 (anf filled down): =SUMIF(Data::$B,A2,Data::$A)
For your example, assuming the 8760 numbers are listed in column A of a table named Data, starting at cell A2:
Add a second column to the table (column B).
In B2 enter the QUOTIENT formula above, with these two revisions:
=QUOTIENT(ROW()+22,24)
Fill down to all cells in the column.
Provided you have named the first table "Data", both formulas in the Sums table will be as written above. You will need to extend the Sums table to 366 rows (including the Header row) to accommodate all 365 groups of 24.
Regards,
Barry
PS: For details on the functions used, see the iWork Formulas and Functions User Guide. You can download the guide via the Help menu in Numbers '09.

Application Express 3.1 + BI-Publisher + problem with formating numbers

Hello together!
I use the Oracle BI Publisher Template Builder for Word (10.1.3.4) to generate RTF-Templates. I upload these templates in Oracle Apex (Advanced support-->BI-Publisher/OC4J as print service).
It works well, but I have a problem with formating numbers.
In Template Builder I define following number formats, for example: #.##0 for numbers like 1.454.234 and #.##0,00 for numbers like 54,80
In Template-Builder Preview it looks well.
But whatever I do, in use with Oracle Apex dots and comma are allready interchances in the printout.
That means,
1.454.234 become 1,454,234 in PDF-Report
54,80 become 54.80 in PDF-Report
Other than that, the layout is exactly the same like in Template Builder defined.
What's wrong?
Do I have to change any country parameter?
Juliane

I also had the same problem. I tried with normal formating of 99g99g999d99 instead of ##,##,##0.00 and it has resulted correct way.

Creation of sub item with serial numbers in outbound delivery

Hi All,
We need to create a sub item for an Outbound Delivery main item in change mode with serial numbers for sub item.
Process flow:
1. Sales order item created with main item
2. Outbound Delivery created with main item
3. Outbound Delivery interfaced to external logistics sytem
4. External logistics system pick the main item and a sub item (packaging) from warehosue and ship to customer
5. External logistics sytems send delivery pick confirmation interface with main item details and serial numbers for sub item
Now we have to create a sub item with serial numbers in the delivery referencing the same main item.
NB: Delivey can have multiple similar main items but there is only material number in SAP for sub item. Hence the requirement to identify relevant sub item serial numbers to each delivery main item.
Can you kindly tell me in what possible ways we can create sub item with serial numbers for a deliveyr main item in change mode.
Thanks in advance
Best Regards
Veer

Hi,
Does anybody have an answer?
Thanks in advance.

Business Partner records with large numbers of addresses -- Move-in issue

Friends,
Our recent CCS implementation (ECC6.0ehp3 & CRM2007) included the creation of some Business Partner records with large numbers of addresses. Most of these are associated with housing authorities, large developers and large apartment complex owners. Some of the Business Partners have over 1000 address records and one particular BP has over 6000 addresses that were migrated from our Legacy System. We are experiencing very long run times to try to execute move in's and move out's due to the system reading the volume of addresses attached to the Business Partner. In many cases, the system simply times out before it can execute the transaction. SAP's suggestion is that we run a BAPI to cleanse the addresses and also to implement a BADI to prevent the creation of excess addresses.
Two questions surrounding the implementation of this code. Will the BAPI to cleanse the addresses, wipe out all address records except for the standard address? That presents an issue to ensure that the standard address on the BP record is the correct address that we will have identified as the proper mailing address. Second question is around the BADI to prevent the creation of excess addresses. It looks like this BADI is going to prevent the move in address from updating the standard address on the BP record which in the vast majority of cases is exactly what we would want.
Does anyone have any experience with this situation of excess BP addresses and how did you handle the manipulation and cleansing of the data and how do you maintain it going forward?
Our solution is ECC6.0Ehp3 with CRM2007...latest patch level
Specifically, SAP suggested we apply/review these notes:
Note 1249787 - Performance problem during move-in with huge addresses
**applied this ....did not help
Note 861528 - Performance in move-in for partner w/ large no of addresses
**older ISU4.7 note
Directly from our SAP message:
use the function module
BAPI_BUPA_ADDRESS_REMOVE or run BAPI_ISUPARTNER_CHANGE to delete
unnecessary business partner addresses.
Use BAdI ISU_MOVEIN_CUSTOMIZE to avoid the creation of unnecessary
business partner addresses (cf. note 706686) in the future for that
business partner.
Note 706686 - Move-in: Avoid unnecessary business partner addresses
Does anyone have any suggestions and have you used above notes/FMs to resolve something like this?
Thanks,
Nick

Nick:
One thing to understand is that the badi and bapi are just the tools or mechanisms that will enable you to fix this situation. You or your development team will need to define the rules under which these tools are used. Lets take them one at a time.
BAPI - the bapi for business partner address maintenance. It would seem that you need to create a program which first read the partners and the addresses assigned to them and then compares these addresses to each other to find duplicate addresses. These duplicates then can be removed provided they are not used elsewhere in the system (i.e. contract account).
BADI - the badi for business partner address maintenance. Here you would need to identify the particular scenarios where addresses should not be copied. I would expect that most move-ins would meet the criteria of adding the address and changing the standard address. But for some, i.e. landlords or housing complexes, you might not add an address because it already exists for the business partner, and you might not change the standard address because those accounts do not fall under that scenario. This will take some thinking and design to ensure that the address add/change functions are executed under the right circumstances.
regards,
bill.

Problem with Purchase Order creation with Random numbers .

Hi Experts
Currently i am facing an issue with Bapi BAPI_PO_CREATE1 to create Purchase order with random numbers for example items 1, 3,5.
Please let me know the settings .
Thanks in Advance

Hi Neha,
A reset of the release strategy only takes place if
- the changeability of the release indicator is set to '4' in
   case of a purchase requisition and '4' or '6' in case of
   another purchasing document (purchase order, request for
   quotation, contract, scheduling agreement),
- the document is still subject to the previous release
   strategy,
- the new TOTAL NET ORDER VALUE is higher than the old one.
The total net order value is linked to CEKKO-GNETW for a purchase order,
CEBAN-GSWRT for a purchase requisition item-wise release and CEBAN-GFWRT
for a purchase requisition overall release.
If you have maintained a Tolerance for value changes during release
(V_161S-TLFAE), the release strategy is reset when the value of the
document is higher than the percentage you have specified and if the
document is still subject to the previous release strategy.
Review the SAP note 365604 and 493900 for more
information about Release strategy.
Regards,
Ashwini.

DIAPI posting Delivery Document with Serial Numbers SP1

Release 2005A, SP1 PL4 seems to have broken code that worked with SP00. When trying to create a Delivery Document that contains Serial Numbers, an error is generated: Error -1, General Error. When adding a delievery document which does not contain serial numbers, the document adds successfully.
The following code loops through a recordset to create documents, add expenses and add serial numbers when appropriate. Is this a new 'feature' or can we make a coding change to eliminate this error?
Sample code:
    Try
      oSalesOrder = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
      RecSet = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      RecSet2 = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      RecSet3 = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      RecSet4 = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      RecSet5 = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      RecSet6 = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      '-- Select Documents to process and loop through recordset
      lsSQL = "SELECT DocEntry FROM DeliveryTable WHERE ProcessResult IS NULL Group by DocEntry"
      RecSet.DoQuery(lsSQL)
      While Not RecSet.EoF
        oSalesOrder.GetByKey(RecSet.Fields.Item(0).Value)
        If bDocuments(piCompany).DelDraft = False Then
          oDelivery = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
        Else
          oDelivery = oCompany(piCompany).GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDrafts)
        End If
        oDelivery.CardCode = oSalesOrder.CardCode
        oDelivery.Comments = "Based On Sales Order " & oSalesOrder.DocNum & "."
        oDelivery.DocDate = Today
        oDelivery.ContactPersonCode = oSalesOrder.ContactPersonCode
        oDelivery.DocCurrency = oSalesOrder.DocCurrency
        oDelivery.DocDueDate = Today
        If bDocuments(piCompany).DelDraft = True Then
          oDelivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
        End If
        '-- Handle Expenses for Document
        Dim ExpenseLoop As Integer
        Dim ExpenseCount As Integer = 0
        For ExpenseLoop = oSalesOrder.Expenses.Count - 1 To 0 Step -1
        ExpenseCount += 1
          '-- Create new Expense if needed
          If ExpenseCount > oDelivery.Expenses.Count Then
            oDelivery.Expenses.Add()
          End If
          oSalesOrder.Expenses.SetCurrentLine(ExpenseLoop)
          '-- Copy all non-readonly properties
          If oSalesOrder.Expenses.LineTotal > 0 Then
            oDelivery.Expenses.BaseDocEntry = oSalesOrder.Expenses.BaseDocEntry
            oDelivery.Expenses.BaseDocLine = oSalesOrder.Expenses.BaseDocLine
            oDelivery.Expenses.BaseDocType = oSalesOrder.Expenses.BaseDocType
            oDelivery.Expenses.DeductibleTaxSum = oSalesOrder.Expenses.DeductibleTaxSum
            oDelivery.Expenses.DistributionMethod = oSalesOrder.Expenses.DistributionMethod
            oDelivery.Expenses.ExpenseCode = oSalesOrder.Expenses.ExpenseCode
            oDelivery.Expenses.LineTotal = oSalesOrder.Expenses.LineTotal
            oDelivery.Expenses.Remarks = oSalesOrder.Expenses.Remarks
            oDelivery.Expenses.TaxCode = oSalesOrder.Expenses.TaxCode
            oDelivery.Expenses.VatGroup = oSalesOrder.Expenses.VatGroup
          End If
        Next ExpenseLoop
        Dim i As Integer = 0
        Dim liMinRef As Integer = -1
        For x = 0 To oSalesOrder.Lines.Count - 1
          lsSQL = "SELECT ISNULL(MIN(CAST(LineRef as int)),999999) as MinLineRef FROM DeliveryTable WHERE DocEntry = " & RecSet.Fields.Item(0).Value & " AND CAST(LineRef as int) > " & liMinRef
          RecSet5.DoQuery(lsSQL)
          If Not RecSet5.EoF Then
            '-- It's possible that the DeliveryTable has less records then the RDR1 table - if that's the case
            '-- we may be at the end, so set the liMinRef field to something out of range
            liMinRef = RecSet5.Fields.Item(0).Value
          End If
          '-- get line items for each document
          lsSQL = "Select * from DeliveryTable WHERE DocEntry = " & RecSet.Fields.Item(0).Value & " AND LineRef = " & x & " AND ProcessResult IS Null"
          RecSet2.DoQuery(lsSQL)
          RecSet2.MoveFirst()
          While Not RecSet2.EoF
            '-- We need to walk through the SO to find the item that we are receiving based on the LineNum
            Dim liCurrentLine As Integer = x
            Dim lbFound As Boolean = False
            While liCurrentLine <= (oSalesOrder.Lines.Count - 1)
              '-- We need to get the PO Line number (x is NOT the LineRef)
              oSalesOrder.Lines.SetCurrentLine(liCurrentLine)
              If oSalesOrder.Lines.LineNum = liMinRef Then
                lbFound = True
                Exit While
              End If
              liCurrentLine += 1
            End While
            If lbFound Then
              i += 1
              If i > oDelivery.Lines.Count Then
                oDelivery.Lines.Add()
              End If
              oDelivery.Lines.BaseEntry = oSalesOrder.DocEntry
              oDelivery.Lines.Quantity = RecSet2.Fields.Item(6).Value
              oDelivery.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
              oDelivery.Lines.LineTotal = oSalesOrder.Lines.LineTotal * (oDelivery.Lines.Quantity / oSalesOrder.Lines.Quantity)
              oDelivery.Lines.UserFields.Fields.Item("U_WhseLoc").Value = RecSet2.Fields.Item(8).Value
              oDelivery.Lines.AccountCode = oSalesOrder.Lines.AccountCode
              oDelivery.Lines.Address = oSalesOrder.Lines.Address
              oDelivery.Lines.Currency = oSalesOrder.Lines.Currency
              oDelivery.Lines.ItemCode = oSalesOrder.Lines.ItemCode
              oDelivery.Lines.BaseLine = liMinRef
              oDelivery.Lines.ItemDescription = oSalesOrder.Lines.ItemDescription
              oDelivery.Lines.WarehouseCode = oSalesOrder.Lines.WarehouseCode
              lsUserID = RecSet2.Fields.Item("UserID").Value
              '-- manage serial numbers
              j = -1
              lsSQL = "Select * from DeliverySerial WHERE DocEntry = " & oDelivery.Lines.BaseEntry & " AND LineRef = " & liMinRef
              lsSQL += " AND WIPLineRef = " & RecSet2.Fields.Item("WIPLineRef").Value
              RecSet3.DoQuery(lsSQL)
              While Not RecSet3.EoF
                '-- get the next SystemSerialNumber for the Inventory Item
                lsSQL = "EXEC " & gsDB(piCompany) & "xspGetSysSerial " & sparm(oDelivery.Lines.ItemCode) & ", " & sparm(RecSet3.Fields.Item("LotNo").Value)
                lsSQL += ", " & sparm(RecSet3.Fields.Item("ManSerNo").Value) & ", " & sparm(RecSet3.Fields.Item("IntSerNo").Value)
                lsSQL += ", " & RecSet3.Fields.Item("QTY").Value & ", " & sparm(oDelivery.Lines.WarehouseCode) & ", " & sparm(RecSet2.Fields.Item(8).Value)
                RecSet4.DoQuery(lsSQL)
                  j += 1
                  If j + 1 > oDelivery.Lines.SerialNumbers.Count Then
                    oDelivery.Lines.SerialNumbers.Add()
                  End If
                  oDelivery.Lines.SerialNumbers.SetCurrentLine(j)
                  oDelivery.Lines.SerialNumbers.BatchID = RecSet3.Fields.Item("LotNo").Value
                  oDelivery.Lines.SerialNumbers.ManufacturerSerialNumber = RecSet3.Fields.Item("ManSerNo").Value
                  oDelivery.Lines.SerialNumbers.InternalSerialNumber = RecSet3.Fields.Item("IntSerNo").Value
                  oDelivery.Lines.SerialNumbers.SystemSerialNumber = RecSet4.Fields.Item(0).Value
                  oDelivery.Lines.SerialNumbers.BaseLineNumber = oDelivery.Lines.BaseLine
                RecSet3.MoveNext()
              End While
              '-- 'end manage serial numbers
            End If
            RecSet2.MoveNext()
          End While
        Next x
        '-- now add object to SAP
        If 0 <> oDelivery.Add() Then
          Dim liError As Long
          Dim lsError As String
          Call oCompany(piCompany).GetLastError(liError, lsError)
          '-- write error code to table - Delivery document creation was unsuccessful
          lsSQL = "Update DeliveryTable SET ProcessResult = " & liError & ", ProcessDate = GetDate() WHERE DocEntry = " & oSalesOrder.DocEntry & " AND ProcessResult Is Null"
          RecSet2.DoQuery(lsSQL)
          lsuWriteEvent("AR Delivery", bDocuments(piCompany).DelDraft, oSalesOrder.DocEntry, liError, lsError, piCompany)
        Else
          lsuWriteEvent("AR Delivery", bDocuments(piCompany).DelDraft, oSalesOrder.DocEntry, 0, "Success", piCompany)
        End If
        RecSet.MoveNext()
      End While
    Catch
      LogErrorMessage(Err.Description)
    Finally
      If Not RecSet Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet)
      End If
      If Not RecSet2 Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet2)
      End If
      If Not RecSet3 Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet3)
      End If
      If Not RecSet4 Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet4)
      End If
      If Not RecSet5 Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet5)
      End If
      If Not RecSet6 Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(RecSet6)
      End If
      If Not oSalesOrder Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oSalesOrder)
      End If
      If Not oDelivery Is Nothing Then
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oDelivery)
      End If
      GC.WaitForPendingFinalizers()
    End Try

We have narrowed down the issue to this:
If you are just adding a delivery document with serial numbers, the DIAPI works OK. If you are adding a delivery document which is based upon a sales order and add the 3 lines that reference it:
oDelivery.Lines.BaseEntry = oSalesOrder.DocEntry
oDelivery.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oDelivery.Lines.BaseLine = liMinRef
then you receive a error of -1, General error. This is functionality that did work in 2004 and 2005 SP00. I believe this is a bug.

Can i use a belkin wireless g router with an iMac

can i use a belkin wireless g router with an imac

It will work. The wireless card in iMacs (recent ones) work with n, g, and b networks. The g protocol is slower (54 mbs) versus n (130 mbs up to 300 mbs). My employer has hundreds of such access points and has been updating them all to n, but there are still some g routers they haven't gotten to, and they work fine. 54 mbs is not bad, it's about 5 megabytes/sec roughly. Typical actual throughput is lower than these numbers by ~ 50%, so doing a large Mac OS update download of 300 Megabytes would take about ~ 2 minutes with a g router, and maybe a bit less than 1 minute with an n router.

Still need help with changing hostname on Solaris 10

Hello.
I have some difficulties with changing host name of my computer.
It is DHCP Client.
AS I understand there are the following steps that I have to do:
1. Edit the /etc/default/dhcpagent file and change the line that reads the following:
#REQUEST_HOSTNAME=no
to
REQUEST_HOSTNAME=no
2. There are two empty /etc/hostname files: hostname and hostname6.
Do I have just to put there hostname?
3. /etc/hosts has what I need to change.
4. I was unable to find /etc/nodename. Do I have to create it? What properties should contain this file?
5. hostname <new hostname>
In previous time when I tried to change host name with Management Console my system crashed, I changed: /etc/hosts, but it didn't work.
Thank you.

Hello.
Using DHCP you may really have problems changing the hostname.
The fact is: The DNS server may assign your machine a host name which has nothing to do with the host name you sent to the DHCP server. Depending on the server (typically DHCP and DNS server are the same machine) nothing will really work. (This is the case with my configuration where the servers are located on a DSL router.)
I solved the problem the following way:
* I created two host names (MyMachine and MyMachineNet) in the /etc/hosts file (Solaris 10 and newer: /etc/inet/ipnodes must be changed, too.)
* "MyMachine" is 127.0.0.1 (localhost):
127.0.0.1 localhost MyMachine
192.168.178.100 MyMachineNet* I assigned the name "MyMachineNet" to the network interface in /etc/hostname.networkcard.
* I use DHCP
The computer name (in /etc/nodename) is "MyMachine". Some programs (e.g. Gnome !) establish a TCP/IP connection to "MyMachine" instead of "localhost" (I do not understand why). These programs are now satisfied because the host name "MyMachine" represents 127.0.0.1 (localhost).
I know that there is a switch that tells Solaris to take the machine name from DHCP/DNS instead of /etc/nodename. Unfortunately I forgot where it is.
Martin

Is there a real increase of performance using a 802.11ac router with a MacBook Pro 13 Retina?

Hi guys!
First of all, sorry for my english. I'm trying to improve myself!
I would like to know if could be a smart choice to change my router with a "802.11ac" router. Is there a real increase of performance?
Right now i'm using a 10mb in download and 10mb in upload connection (fibre optic).
Thank you!
Rocco

Your download speed from your ISP is not changed 10 MB download/upload speed.
http://www.speedtest.net/
Your transmit rate from router to computer will increase with simultaneous dual band 802.11ac
hold the option key and click on your WiFI in the upper right screen to see a breakdown.
802.11n will be held back

Working with Large Numbers

Hi there,
I am currently doing a school assignment and not looking for answers but just a little guidance.
I am working with large numbers and the modulo operator.
I might have some numbers such as :
int n = 221;
int e = 5;
int d = 77;
int message = 84;
int en = (int) (Math.pow(message, e) % n);
int dn = (int) (Math.pow(en, d) % n);Would there be a better way to do this kind of calculation. The dn value should come out the same as message. But I always get something different and I think I might be losing something in the fact that an int can only hold smaller values.

EJP wrote:
It might make sense in some contexts to have a positive and negative infinity.
Yes, perhaps that's a better name. Guess I was harking back to old COBOL days :-).(*)
But the reason these things exist in FP is because the hardware can actually deliver them. That rationale doesn't apply to BIgInteger.Actually, it does. All I'm talking about is a value that compares higher or lower than any other. That could be done either by a special internal sign value (my slight preference) or by simply adding code to compareTo(), equals() and hashCode() methods that takes the two constants into account (as they already do with ZERO and ONE).
Don't worry, I'm not holding my breath; but I have come across a few situations in which values like that would have been useful.
Winston
Edited by: YoungWinston on Mar 22, 2011 9:07 AM
(*) Actually, '±infinity' tends to suggest a valid arithmetic value, and I wasn't thinking of changing existing BigInteger/BigDecimal maths (except perhaps to throw an exception if either value is involved).

Duplicate Routing with dependencies

Hi all,
I'm trying to copy a Routing changing the Application (VERWE = 'C' instead of '1')
I'm using the FM CARO_ROUTING_READ to take the original Routing and then call FM BAPI_ROUTING_CREATE passing tables TASK, MATERIALTASKALLOCATION, SEQUENCE and OPERATION .
It works fine: duplicate all from the original but it doesn't copy the dependencies allocated in every single operation inside the routing.
Anyone have an Idea to copy these dependencies? maybe another FM, Bapi, or doing a select from a table? which one?
Thanks!
Best Regards

check the post:
BOM and Routing with Dependencies
-Murugesh AS

BGP default route advertisement - change preference

hi guys,
I would appreciate some assistance here. We have a primary head office & a DR site. Routers at both sites connect to our carrier for an IP VPN service using BGP. BGP configs on each router advertise a default route 0.0.0.0.
#sh ip bgp neighbors x.x.x.x advertised-routes
BGP table version is 358, local router ID is x.x.x.x
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Originating default network 0.0.0.0
Issue is, some of our remote sites prefer the DR router path for traffic destined to internet.
We are advertising multiple default routes to our carrier, and based on feedback from carrier, route with lowest MED is preferred.
This brings me to what i need to change from my side. Need to change the route preference so that from our remote offices, only the route to head office is preferred with DR site the least preferred route. I know there are multliple ways of doing this, however keen to get input from the experts out there.
DR site router has this BGP config currently applied:
router bgp XXXXX
bgp log-neighbor-changes
redistribute connected
redistribute ospf 1 match internal external 1 external 2
neighbor x.x.x.x remote-as XXXX
neighbor x.x.x.x default-originate
neighbor x.x.x.x soft-reconfiguration inbound
neighbor x.x.x.x route-map IMPORT-POLICY in
neighbor x.x.x.x route-map OPI-route-advertisement out
default-information originate
Removing the "neighbor x.x.x.x default-originate" is not an option, as we need to have the ability to failover to DR at any point.
Thanks in advance & if you need any further info pls advise.
Rama

Hi Milan,
Thanks. Answers below:
Does it provide an MPLS backbone to you? YES
Are you using the same AS number on all your sites or different ones? Same AS
Any way, what about advertising the default route from your DR site with the site AS number prepended several times (5 times, e.g.)? That's the thing I am struggling to understand as the route-map OPI-route-advertisement already has it prepended 2 times. Shouldn't that be enough to influence which route is least preferred?
route-map OPI-route-advertisement permit 20
match ip address prefix-list xxx default-route
set as-path prepend XXXXX XXXXX
If your provider would permit that and hasn't configured his routers to ignore the AS_PATH length (as him a question), it should make the default route advertised from your DR less preferred within your backbone. Will ask.
Given this, any other thoughts/questions?
Thanks, Rama

Routing with change numbers.

Similar Messages

Maybe you are looking for