# row for Master data report

Hi,
I created a report on Master data object. I am seeing a line on this report with # filled in for key field as well. How to hide this line completely?
Thanks,
Dona

Sudheer, thanks for the solution. But I would like to display my key object as well in the report. Also wouldn't exclusion be a hindrance to performace?
is there any other solution not to display the # key value that is part of Master data architecture?

Similar Messages

  • Best Practice for Master Data Reporting

    Dear SAP-Experts,
    We face a challenge at the moment and we are still trying to find the right approach to it:
    Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
    Questions they want to answer here are for example:
    - How many active Materials/SKUs do we have?
    - Which country/Sales Org has adopted certain Materials?
    - How many Series do we have?
    - How many SKUs below to a specific season
    - How many SKUs are in a certain product lifecycle
    - etc.
    The challenge is, that the Master Data is stored in tables with different keys in the R/3.
    The keys in these tables are on various levels (a selection below):
    - Material
    - Material / Sales Org / Distribution Channel
    - Material / Grid Value
    - Material / Grid Value / Sales Org / Distribution Channel
    - Material / Grid Value / Sales Org / Distribution Channel / Season
    - Material / Plant
    - Material / Plant / Category
    - Material / Sales Org / Category
    etc.
    So even though the information is available on different detail  levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
    Best regards
    Lukas

    Pass a reference to the parent into the modal popup. Then you
    can reference anything in the parent scope.
    I haven't done this i 2.0 yet so I can't give you code. I'll
    post if I do.
    Oh, also, you can reference the parent using parentDocument.
    So in the popup you could do:
    parentDocument.myPublicVariable = "whatever";
    Tracy

  • Error while creating Data Source for master data attributes

    Hi BI Experts,
    Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
    I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
    Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as   ,
    and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is  MAT_NUMBER and MAT_NAME (with say 100 data in the file)
    same is the result when I am trying to load the text data too columns maintained are
    (LANGUAGE MAT_NUMBER Short Description)(same 100 data).
    now i used to rsa1old transaction  to upload the file using 3.5 version.i created info source for master data/text/hierarchies for  IOSP_Mat
    now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
    When I monitored ,I figured the data has not been even uploaded to the PSA level.
    Can you BI experts tell me the answer for this.
    Thanks,
    Srijith

    apologies to all of you for late response,
    was busy with some other activities.
    I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
    Thanks again for your quick response.
    Once again sorry to all of you for my late response
    Thanks,
    Sri

  • Master Data Report

    Hi,
    I want to create a master data report which contains just charactristics no key figures.
    For excample I want to show which client has which type of rate.
    How can I do this?
    Everytime I get an error message that I have to determine a key figure in the report.
    THanks
    Johannes

    Thanks I understand that I have to use a workaround like this.
    But can I display characterisitc values in the query like a key figure value?
    Customer | Rate
    Client 1    | AAA
    Client 2    | BBB
    Clinet 3    | AAA
    Thanks
    Johannes

  • Withholding tax master data report changes in SAP FI

    Hi All,
    In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax master data report.
    Changes only functionality has to be added to the selection screen of the report, the report has to display changes made to the tax master data with in a range of period, this was achieved easily by making program changes. Only issue now is when we do it in development client its showing us properly but when we do it in production it is not working because when ever we do any configuration changes we do it in the development client and transport it to production client so the changes done to any configuration with respect to WHT are not recorded in the production environment as they are transported from development client.
    So, we are unable to achieve this in production client, please help me out with this issue.
    Tthanks in advance

    hi
    i need field
    withholding tax exemption no, exemption from date, todate, Exemption reason, 
    as a master data it is saved in vendor master data > withholding tax accounting
    but i need where it is saved in transaction data.
    thanks

  • Excel 2012 SP1 plagin for Master Data Services - Bugs ???

    Excel 2012 SP1 plagin for Master Data Services 32bit or 64bit
    1.  
    My entity A has 50,000 records.
    Entity B has a domain attribute "City" from entity A.
    I successfully add new records to the entity B, but after refresh I cannot see any data in the domain attribute "City" for new records (empty cels)!!! Although in the Web client (or through SSMS in table)  I can see the data in "City"
    attribute (e.g. code_095 {Moscow}).
    If I reduce the number of records in the entity A to 20 000, then I see code_095 {Moscow} in Excel 2012 SP1 plagin for MDS.
    Bug???
    2.
    Why Excel 2012 SP1 plagin for MDS resets the format cells ???  Bug???
    3.
    I have created rows for my own headings (business captions) above the MDS-table in the Excel-worksheet.
    Excel 2012 SP1 plagin for MDS: Why after applying the filter (query from server) Excel-worksheet completely recreated ?
    And all my row headers have been removed!!! What the hell ?
    from Moscow with money

    Superbluesman, is this still an issue? This looks like a bug. Did you file a Connect Item?
       Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Master Data Reporting........data flow model

    I will be working on Master Data reporting. I heard that this can be done by loading data from a Datasource into an InfoObject. I would like to see a data model for this scenario. Can anyone help me on this?

    Hi:
    If you want to be more specific.
    Open the InfoObject in change mode.
    Go to Tab - Master Data/Texts
    Here, if you go down, you will see a box for "InfoArea". Open this box and pick an InfoArea.
    THis will do2 things.
    1) It will allow you to create reports in the InfoObject.
    2) It will allow you to Update the Master Data using any InfoSOurce.
    Ram C.

  • Basic question on Master data reporting on ODS

    Hello All,
    Recently I had a requirement, where they need to see the master data report ( with its attributes and attributes of attributes (transitive attribute)). Hence I loaded the master data on a ODS, to turn on the Navigational attributes.........
    For e.g.:  Requirement:
    Master data :                       0EQUIPMENT
    ATTRIBUTE:                        0SHIP_TO
    ATTRIBUTE of ATTRIBUTE:  0SHIP_TO_REGION
    Question: The report is working fine...... but I have a doubt whether the report (built on the ODS with no Key figures) will populate the master data for which there is no Key figures are maintained in ECC???
    Please let me know your ideas and views.......

    Hi........
    I think it will be better if u use Infoobject to store master data......here also u can turn attributes to Navigational attribute....u can activate that  infoobject as dataprovider and do the Reporting as you do it now for the ods object. .........The master data approach will additionally give you the possibility to add navigational attributes to fulfil more reporting requirements..........In RSA1.............Infoprovider >> Right click >> Insert that Infoobject as Infoprovider............
    Regards,
    Debjani.......

  • How to do Stastical Setup for Master data Loading

    Hi All
    Thanks a lot for all guys,who are helping me a lot.
    I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
    But what is the procedure for MAster data in SBIW-Tcode.
    Regards
    Balaji

    Hi,
    <i>Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?</i>
    Actually this will decrease the time of transaction data loading .So it improves the loading performance ,  not reporting performance.
    <i>Now I got a doubt from where this Master Data is been loading? and how to load this data.</i>
    2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
    For example 0materail is the Master characterstic.
    And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
    0MATERIAL_ATTR
    0MATERIAL_LGEN_HIER
    0MATERIAL_LKLS_HIER
    0MATERIAL_TEXT
    With rgds,
    Anil Kumar Sharma .P

  • What is Master data reporting

    Hi friends
                     what is Master data reporting. can anyone please explain elobarately.

    Hi
        How to report on Master data like for Material master, If i want to have report on Material and the price of that material,Cost of the material. What are the steps we have to follow to get report. Can we get report directly from master data objects or we have to send the data to data targets like Infocubes,DSO. If we have hierarchies in master data, what is the procedure.
    Thanks&Regards
    Bramhananda Reddy

  • About delta loading for master data attribute

    Hi all,
    We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    Thanks a lot

    Hi...
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
    1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
    2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
    3) then Delta.......
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    1) Make the QM status red.........to set back the init pointer.......
    2) Repeat the load.....
    After that.........if again load failed with Update mode R.....
    1) delete the init flag.......
    2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
    3) then Delta.......
    Regards,
    Debjani.....

  • Unable to generate "Export data source" for Master data infoobject

    Hi Gurus,
    I'm in BW 3.5
    I need to generate "Export data source" for a master data info object.
    I followed below steps:
        I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
        In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource  was successful"
    Problem:
    Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
    Could anyone please help ????
    Thanks,
    Venkat

    Hi Venkat,
    I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
    However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
    If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
    Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
    -Vikram

  • Creation of OLAP Variable for Master data

    Dear BW Experts,
    How to Create OLAP Variable for Master data  in SAP BW? What is the use of OLAP Variable?

    The entry column Type (Variable) on the Select Data tabpage indicates a variable time frame in which the data should be requested. The variables are not replaced by concrete values until a request is made. There are eight options:
    Variable            Data request        Description
    0
                          Yesterday
                                            (12am – 12am)
    1
                         Last week
                                            (Monday-Sunday)
    2
                           Last month
                                            (1. (First day - last day of previous month)
    3
                           Last quarter
                                           (1. (First day - last day of previous quarter)
    4
                           Last year
                                          (01. (January 1 – Dec 31 of previous year)
    5
                      User time selection
                                               See below
    6
                       ABAP routines
                                               See below
    7
                         <b>OLAP variables</b>
                                                See below
    <b>Time selections with the help of the variables 0 to 4.</b>
    The variables 0-4 only refer to date fields of the data type DATS.
    <b>User time selection</b>
    Type 5 gives you a free selection of all fields.
    If you select this variable for a field, confirm the selection, and then choose Detail for Type, an additional dialog box appears. In this dialog box you can freely limit the values of the fields and determine the next period value and the number of periods until a repetition.
    Variables are placeholders for values and are not replaced by concrete values until a data request is made. You can also use a Variable for selections when requesting data for an InfoObject, if you choose type 7, confirm the selection, and then choose Detail for Type.

  • Error handling for master data with direct update

    Hi guys,
    For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
    But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
    Many thanks,
    / Christian

    Hi Christian -
    Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
    second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
    hope it helps
    regards
    Vikash

  • Why to use chnage  pointers for  master data idoc why not  the  change idoc

    Hi Gurus,
    I have  one doubt about  Idoc.
    When changes to master  data has to be sent Change pointers are configured and  used. (CDPOS & CDHDR). In case of  the  transaction data change change idoc  is  used as is the case with orders (we  use ORDCHG for  ORDERS message type to send  the  chnage details to a  order which was already sent to other system.
    Why we can't use  change  idoc or  message type whatever, instead of  Chnage pointers in case of  master data or  vice versa in case  of transaction data.
    Your valuable  input  will be rewarded with suitable  points!!
    -B S B.

    Hi,
    It was a good question ... SAP seems never designed the change pointer to handle transactional data IDocs. Only for master data IDocs distribution purposes.
    It may due to volume data ... the transactional data can change many times within a day compare with master data which hardly change or once a while.
    Regards,
    Ferry Lianto

Maybe you are looking for