Row of an output goes automatically down after printing 1/2 screen?

I have installed oracle 10g xe R8 in oel 4 which is running on vmware. When i see the records in the table by giving query "SELECT * FROM table_name;" in plsql, then the row of an output shown goes automatically to second line after printing half screen. In this way whole table gets mess i.e. looks irregular.
thanks in advance

Did you mean in SQL*Plus?
SQL*Plus is a very basic command-line tool and doesn't handle wide result sets well without some manual formatting. Also the default settings are not very helpful - I think linesize defaults to a tiny 80 characters and pagesize an absurd 12 lines. Setting linesize to a larger figure will allow longer rows to be displayed without wrapping (although the terminal within which SQL*Plus is running may need adjusting too). However, the describe command unhelpfully adjusts its output to match the current linesize, which is why I use a script desc.sql as a wrapper.
Of course none of this is relevant if you are not using SQL*Plus.

Similar Messages

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Adobe Photoshop CS2 shuts itself down after printing..

Not sure whether I'm in the right place to post this..
In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
The Photoshop CS2 is version 9.0
I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
Regards,
Meru
iMacs Mac OS X (10.4.8)
eMacs, iBook G4s Mac OS X (10.3.9)

Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

Internal screen shuts down after suspending on multi-screen configuration

Hello,
I upgraded (very) recently to OS X Mavericks on my MacBook Pro, which is plugged on a second screen via VGA. I wanted to suspend the activity on my computer, so I chose "Suspend activity" and then I closed the display panel to get the computer to "sleep".
When I open the display, the internal screen remains off and is no longer detected by the system. When I go to "System Preferences" and select "Monitors", I get only the second screen preferences.
In addition to that, the background is the one set on the first screen, but adapted to the correct resolution (I use a 1920x1080 screen, the internal one is 1440x900). When I do a screenshot, only the second screen is included.
The only way to recover from this problem is to disconnect the VGA adapter and to reconnect it then.
Am I reporting this problem in the correct place, and if not, where do I need to report it?
Thank you.

Spinning wheels are not a facet of Classic operating systems. Identify your Mac with this tip:
http://discussions.apple.com/docs/DOC-6413 and post to the appropriate forum: http://discussions.apple.com/docs/DOC-2463 after checking this tip on what may be slowing you down: http://discussions.apple.com/docs/DOC-6921

Sattelite LAptop slow down after 1 sek blue screen

Hy Together sorry for my bad english.
This morning after working a little bit with word. a blue screen appeared fpr 1 sek an the Laptop crashes.
Now it is still starting windows but is too slow to work.
Need from start up to the first window screen nearly 15min. An it is not possible to work.
Now it works with Vista
In this way i wanted to install win vista with the recovery CD but in cant format Drive C. If i put the CD in i have only the possibility to start the normal windows. Can someone please give me some Ideas where I have to look. Perhaps something is damaged?
In which way can i clear the Drive C an reinstall Windows Vista?
Or is it possible to install Windows7? My Laptop has two Graphic Apapters an a Raid HDD System.
Thanks a lot
Winger

Hi and thanks for joining the HP forums. Please see the information at the link below for help resolving your issue:
http://www.laptopproblemfixed.com/laptop-shuts-off-when-ac-adapter-plugged-in/.
Thanks.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Automatic pdf after printing

Hi all - can anyone help
I want to create a script that automatically generates a pdf from a file once it has been sent to print.
I also want it to save the generated pdf in the same folder as the saved file.
I am guessing this is possible somehow. Any help would be gratefully received.
Thanks
Angus

I have neither application so I can't be certain that what I suggest is the best option for your situation. For multi-purpose PDF printing however, I generally recommend the installation of a software printer such as the one provided by Acrobat or this free one.
Your workflow would have to be set up to print first to the software printer, and then to the hardware printer. I'm not sure Automator will like that, and I'm pretty sure Automator won't know where to put the PDF files without some help from AppleScript. I can help with the AppleScript, but you'll need to reconfigure it to work on your machine.

Adobe Reader does not close after printing.

When I right click on a .PDF in Windows and choose Print, the file prints but then Adobe Reader remains minimized on the task bar. How can I get Reader to automatically close after printing?
Adobe Reader 9.3.0
Windows XP SP3

Yes , i had tried it lot but i didn't found the way....
www.hostyourspace.co.uk

Satellite P10 automatically goes into Standby after 15 minutes

My Satellite P10 automatically goes into Standby after 15 minutes. This is a setting that is controlled by the Toshiba Power Management settings, or the Toshiba Console.
When I change the settings there the system still goes into Standby after 15 minutes. When I go to Control Panel/Performance and Maintenance/Power Options, it tells me to go to the Toshiba Power Management to change the settings, but I can still see the settings in grey stating 15 minutes standby time.
But in the Toshiba Power Management I can't seem to be able to ajust Standby settings so that they actually work. There must be a trick to it..
Can anyone help me figure it out?
Thanks a lot,
Lerak

Thank you for your replies. As I now understand it there are 3 power management utilities fighting for control of the power management settings:
1) The windows OS power options("Power Option Properties, from the control panel/performance and maintenance/power options);
this utility is overridden by:
2) Toshiba Power management;
and
3) the "power save modes", activated by pressing the Function key and the F2 key, which in turn can override the Toshiba Power management.
If this last Function/F2 combination is used to change the power save modes, the windows OS power settings (which are shown in grey and cannot be changed because this is overridden by the Toshiba Power management) DO actually change.
Hold down the Function key (Fn) and press F2, holding down the Fn key. Each time you then press the F2 key again you scroll down the different "Power Schemes". The last mode is called: Toshiba Power Management. One would think that by choosing this setting the Toshiba Power management utility would effectively take over control of the power settings. Unfortunately this does not seem to be the case..
At least using this last option provides a workaround. Some of the "Power Schemes" disable the standby options.

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

What do I do if an iPod shuts down after going into sleep mode

My friends iPod keeps shutting down after it goes into sleep mode. I just fixed it up (restored it, had to dry it out after it fell into water) and now it does that. Everything else works fine but if I put it in sleep mode or put it into sleep mode it shuts down. How do I fix this because I've never seen this happen before.

Hey Tecmo_SB_Guy,
I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate.
1. Windows key + Q to open the Search Bar
2. Type "power"
3. Click Settings under the Search Bar
4. Select Power Options from the results on the left.
5. In Power Options, Click Change when the computer sleeps, on the left.
6. Set the Put the computer to sleep setting so that it fits your usage best.
7. Click Change advanced power settings, at the bottom.
8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
9. Click Apply to save changes.
If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
I hope these suggestions help! Please let me know if you have any questions
Attachments:
PowerHibernateNever.jpg ‏59 KB

VOD - application goes down after a while (only some instances)

Hello Guys,
I have a simple VOD application running on FMS 3.5.5 which I need to stream continuously but I'm unable to identify the correct configuration to do so. I removed as much limit details as I could from those XML file: Server.xml, Application.xml and VHost.xml.
Basically I have arround 15 different streams but all of sudden some of them, NOT ALL, goes down with no explanation (as I could see).
As per logs, there is no much details but "application unloaded".
Can someone pls help me to identify what else needs to be changed in order to have those stream playing continuously? Usually they went down after some hours in idle state. But I'm not sure whether it's related to CPU/Memory usage. My server has 8GB of memory, and when I start playing all those stream the memory goes down till 52mb free (50mb to 53mb usually). "All" memory is allocated to cache, and it seems there is no problem with that.
Server.xml
<Root>
 <Server>
 <NetworkingIPv6 enable="false" />
 <CrossDomainPath></CrossDomainPath>
 <Plugins>
 <UserDefined>
 <UserKey1>
 This data can be retrieved by FMS plug-in.
 Please look at Auth Adaptor sample for details.
 </UserKey1>
 <UserKey2>
 This data can be retrieved by FMS plug-in.
 Please look at Auth Adaptor sample for details.
 </UserKey2>
 </UserDefined>
 <FilePlugin enabled="true">
 <MaxNumberOfRequests>0</MaxNumberOfRequests>
 <Content type="Streams">true</Content>
 <Content type="SWF">false</Content>
 </FilePlugin>
 </Plugins>
 <SSL>
 <SSLRandomSeed>16</SSLRandomSeed>
 <SSLSessionCacheGC>5</SSLSessionCacheGC>
 <SSLClientCtx>
 <SSLVerifyCertificate>true</SSLVerifyCertificate>
 <SSLCACertificatePath></SSLCACertificatePath>
 <SSLCACertificateFile></SSLCACertificateFile>
 <SSLVerifyDepth>9</SSLVerifyDepth>
 <SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
 </SSLClientCtx>
 </SSL>
 <Process>
 <UID>${SERVER.PROCESS_UID}</UID>
 <GID>${SERVER.PROCESS_GID}</GID>
 </Process>
 <Mask>017</Mask>
 <LicenseInfo>${SERVER.LICENSEINFO}</LicenseInfo>
 <LicenseInfoEx></LicenseInfoEx>
 <ReadBufferSize>4096</ReadBufferSize>
 <AdminServer>
 <CrossDomainPath></CrossDomainPath>
 <RTMP>
 <RTMPE enabled="true"></RTMPE>
 </RTMP>
 <HostPort>${SERVER.ADMINSERVER_HOSTPORT}</HostPort>
 <IpcHostPort>localhost:11110</IpcHostPort>
 <SocketGC>60</SocketGC>
 <Process>
 <UID>${SERVER.PROCESS_UID}</UID>
 <GID>${SERVER.PROCESS_GID}</GID>
 </Process>
 <AdminElem>false</AdminElem>
 <Allow>all</Allow>
 <Deny></Deny>
 <Order>Allow,Deny</Order>
 </AdminServer>
 <AutoCloseIdleClients enable="false">
 <CheckInterval>-1</CheckInterval>
 <MaxIdleTime>-1</MaxIdleTime>
 </AutoCloseIdleClients>
 <ResourceLimits>
 <FLVCachePurge>60</FLVCachePurge>
 <FLVCache>
 <FileCheckInterval>120</FileCheckInterval>
 <MaxSize>${SERVER.FLVCACHE_MAXSIZE}</MaxSize>
 <MaxKeyframeCacheSize>0</MaxKeyframeCacheSize>
 </FLVCache>
 <RecBuffer>
 <MaxFlushTime>5</MaxFlushTime>
 <MaxFlushSize>256</MaxFlushSize>
 <AllowedVideoLag></AllowedVideoLag>
 <MaxSize>512000</MaxSize>
 <MaxTimestampSkew>-1</MaxTimestampSkew>
 </RecBuffer>
 <CPUMonitor>1</CPUMonitor>
 <ThreadPoolGC>20</ThreadPoolGC>
 <MsgPoolGC>60</MsgPoolGC>
 <ApplicationGC>-1</ApplicationGC>
 <FLVCacheSize>10</FLVCacheSize>
 <SocketGC>60</SocketGC>
 <ProcVMSizeMonitorInterval>60</ProcVMSizeMonitorInterval>
 <ProcVMSizeWarn>1800</ProcVMSizeWarn>
 <ProcVMSizeNominal>1600</ProcVMSizeNominal>
 <SSLSessionCacheGC>5</SSLSessionCacheGC>
 <Connector>
 <HTTP>
 <MinConnectionThreads>0</MinConnectionThreads>
 <MaxConnectionThreads>0</MaxConnectionThreads>
 <MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
 <HandleCache>
 <MaxSize>100</MaxSize>
 <IdleTime>30</IdleTime>
 <TrimSize>0.2</TrimSize>
 <GCInterval>60</GCInterval>
 </HandleCache>
 </HTTP>
 <RTMP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>32</MaxIOThreads>
 <NumCRThreads>0</NumCRThreads>
 <MinConnectionThreads>0</MinConnectionThreads>
 <MaxConnectionThreads>0</MaxConnectionThreads>
 <MaxConnectionQueueSize>-1</MaxConnectionQueueSize>
 </RTMP>
 </Connector>
 <Protocol>
 <RTMP>
 <Edge>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 <MaxConnectionRate>-1</MaxConnectionRate>
 </Edge>
 <Core>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </Core>
 <Admin>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </Admin>
 <SocketSndBuf>0</SocketSndBuf>
 <SocketRcvBuf>0</SocketRcvBuf>
 <DiffServ>0</DiffServ>
 <DiffServMask>0</DiffServMask>
 </RTMP>
 <ECCP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 <CoreTimeout>30</CoreTimeout>
 </ECCP>
 <ACCP>
 <MinIOThreads>0</MinIOThreads>
 <MaxIOThreads>0</MaxIOThreads>
 <SocketTableSize>-1</SocketTableSize>
 <SocketOverflowBuckets>-1</SocketOverflowBuckets>
 </ACCP>
 </Protocol>
 <IPCQueues>
 <GlobalQueue>
 <HeapSize>2048</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </GlobalQueue>
 <EdgeCore>
 <HeapSize>1024</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </EdgeCore>
 <Services>
 <HeapSize>2048</HeapSize>
 <MaxQueueSize>10</MaxQueueSize>
 </Services>
 </IPCQueues>
 <MessageCache enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </MessageCache>
 <SmallMemPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </SmallMemPool>
 <LargeMemPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </LargeMemPool>
 <SegmentsPool enable="false">
 <MaxCacheUnits>4096</MaxCacheUnits>
 <MaxCacheSize>100</MaxCacheSize>
 <MaxUnitSize>16</MaxUnitSize>
 <FreeRatio>0.125</FreeRatio>
 <GlobalRatio>0.4</GlobalRatio>
 <MaxAge>1000000</MaxAge>
 <UpdateInterval>1024</UpdateInterval>
 <FreeMemRatio>0.5</FreeMemRatio>
 </SegmentsPool>
 <Master>
 <CoreGC>-1</CoreGC>
 <CoreExitDelay>20</CoreExitDelay>
 </Master>
 <Edge>
 <MinEventQueueThreads>2</MinEventQueueThreads>
 <MaxEventQueueThreads>-2</MaxEventQueueThreads>
 <NumSchedQueues>1</NumSchedQueues>
 </Edge>
 </ResourceLimits>
 <Logging>
 <Time>local</Time>
 <RetryNumber>0</RetryNumber>
 <RetrySleep>100</RetrySleep>
 <RecordsNumber>-1</RecordsNumber>
 <TerminatingCharacters>CRLF</TerminatingCharacters>
 <Access>
 <Enable>true</Enable>
 <Scope>server</Scope>
 <Checkpoints enable="false">
 <CheckInterval>60</CheckInterval>
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 </Access>
 <Diagnostic>
 <Enable>true</Enable>
 </Diagnostic>
 <Application>
 <Enable>true</Enable>
 </Application>
 <AuthEvent>
 <Enable>true</Enable>
 </AuthEvent>
 <AuthMessage>
 <Enable>true</Enable>
 </AuthMessage>
 <FileIO>
 <Enable>true</Enable>
 </FileIO>
 </Logging>
 <Localhost>localhost</Localhost>
 <PublicIP></PublicIP>
 <SWFVerification>
 <SWFFolder></SWFFolder>
 <DirLevelSWFScan>1</DirLevelSWFScan>
 <MaxInitDelay>5</MaxInitDelay>
 <MinGoodVersion></MinGoodVersion>
 <Cache>
 <TTL>1440</TTL>
 <UpdateInterval>5</UpdateInterval>
 </Cache>
 </SWFVerification>
 <Streams>
 <StreamLogLevel>warning</StreamLogLevel>
 <Mp4>
 <Playback>
 <VideoAutoBufferReadSize>153600</VideoAutoBufferReadSize>
 <AudioAutoBufferReadSize>51200</AudioAutoBufferReadSize>
 <OtherAutoBufferReadSize>1024</OtherAutoBufferReadSize>
 <EnableAggMsgs>true</EnableAggMsgs>
 <MaxAggMsgSize>65536</MaxAggMsgSize>
 <MaxTracks>64</MaxTracks>
 <MaxSampleSize>16777216</MaxSampleSize>
 <AllowAnyAVCProfile>false</AllowAnyAVCProfile>
 <AllowAnyAACProfile>false</AllowAnyAACProfile>
 </Playback>
 <Recording>
 <MaxELSTEntries>100</MaxELSTEntries>
 <MaxDataSampleDescriptions>10</MaxDataSampleDescriptions>
 <MaxAudioSampleDescriptions>10</MaxAudioSampleDescriptions>
 <MaxVideoSampleDescriptions>10</MaxVideoSampleDescriptions>
 </Recording>
 </Mp4>
 <Raw>
 <EnableAggMsgs>true</EnableAggMsgs>
 <MaxAggMsgSize>65536</MaxAggMsgSize>
 </Raw>
 </Streams>
 <Httpd enabled="${SERVER.HTTPD_ENABLED}">
 <Directory>Apache2.2</Directory>
 <Program>bin/httpd</Program>
 <Options>-f ./conf/httpd.conf</Options>
 <Service>FMSHttpd</Service>
 </Httpd>
 </Server>
 <ServerDomain></ServerDomain>
</Root>
Application.xml
<Application>
 <Process>
 <Scope></Scope>
 <Distribute numprocs="3">Instances</Distribute>
 <LifeTime>
 <RollOver></RollOver>
 <MaxCores></MaxCores>
 </LifeTime>
 <MaxFailures>2</MaxFailures>
 <RecoveryTime>0</RecoveryTime>
 </Process>
 <LoadOnStartup>false</LoadOnStartup>
 <MaxAppIdleTime>-1</MaxAppIdleTime>
 <JSEngine>
 <RuntimeSize>1024</RuntimeSize>
 <MaxGCSkipCount>-1</MaxGCSkipCount>
 <MaxTimeOut>0</MaxTimeOut>
 <ScriptLibPath>${APP.JS_SCRIPTLIBPATH}</ScriptLibPath>
 <XMLSocket>
 <MaxUnprocessedChars>4096</MaxUnprocessedChars>
 </XMLSocket>
 <NetConnection>
 <ObjectEncoding>AMF3</ObjectEncoding>
 </NetConnection>
 <Security>
 <RPC enable="false">
 <Client>
 <Method>
 <Allow></Allow>
 </Method>
 </Client>
 <NetConnection>
 <Method>
 <Allow>onStatus</Allow>
 </Method>
 </NetConnection>
 <SharedObject>
 <Method>
 <Allow></Allow>
 </Method>
 </SharedObject>
 <Stream>
 <Method>
 <Allow>onStatus</Allow>
 </Method>
 </Stream>
 </RPC>
 </Security>
 </JSEngine>
 <StreamManager>
 <StorageDir></StorageDir>
 <QualifiedStreamsMapping enable="false" />
 <DuplicateDir appName="true"></DuplicateDir>
 <CachePrefix type="path">?IP?</CachePrefix>
 <CacheUpdateInterval></CacheUpdateInterval>
 <MaxBufferRetries>128</MaxBufferRetries>
 <ThrottleBoundaryRequest enable="false">8</ThrottleBoundaryRequest>
 <ThrottleLoads enable="true">8</ThrottleLoads>
 <ThrottleDisplayInterval>64</ThrottleDisplayInterval>
 <EnhancedSeek zone="client">true</EnhancedSeek>
 <KeyFrameInterval>60000</KeyFrameInterval>
 <MaxStreamsBeforeGC>-1</MaxStreamsBeforeGC>
 <Audio>
 <CombineSamples>
 <Subscribers>8</Subscribers>
 <LoCPU>60</LoCPU>
 <HiCPU>80</HiCPU>
 <MaxSamples>0</MaxSamples>
 </CombineSamples>
 <SendSilence>
 <Interval></Interval>
 </SendSilence>
 <NotifyAudioStop enabled="false">
 <Duration></Duration>
 </NotifyAudioStop>
 </Audio>
 <Live>
 <AccumulatedIFrames>
 <MaxTime>-1</MaxTime>
 <MaxSize>-1</MaxSize>
 </AccumulatedIFrames>
 <Queue enabled="true">
 <MaxQueueSize>4096</MaxQueueSize>
 <MaxQueueDelay>500</MaxQueueDelay>
 <FlushOnData>true</FlushOnData>
 <AggregateMessages enabled="true">
 <MaxAggMsgSize>-1</MaxAggMsgSize>
 </AggregateMessages>
 </Queue>
 <PublishTimeout>2000</PublishTimeout>
 <MaxLatency>500</MaxLatency>
 <StartClockOnPublish>false</StartClockOnPublish>
 <EraseOnPublish>true</EraseOnPublish>
 </Live>
 <SendDuplicateStart>true</SendDuplicateStart>
 <SendDuplicateOnMetaData>true</SendDuplicateOnMetaData>
 <Recording>
 <MaxSize>-1</MaxSize>
 <MaxSizeCap>-1</MaxSizeCap>
 <MaxDuration>-1</MaxDuration>
 <MaxDurationCap>-1</MaxDurationCap>
</Recording>
 </StreamManager>
 <SharedObjManager>
 <StorageDir></StorageDir>
 <DuplicateDir appName="true"></DuplicateDir>
 <ResyncDepth>-1</ResyncDepth>
 <LockTimeOut>-1</LockTimeOut>
 <AutoCommit>true</AutoCommit>
 <MaxProperties>-1</MaxProperties>
 <MaxPropertySize>-1</MaxPropertySize>
 </SharedObjManager>
 <AllowHTTPTunnel>true</AllowHTTPTunnel>
 <Client>
 <WindowsPerAck>2</WindowsPerAck>
 <Bandwidth override="yes">
 <ServerToClient>2500000</ServerToClient>
 <ClientToServer>2500000</ClientToServer>
 </Bandwidth>
 <BandwidthCap override="no">
 <ServerToClient>5000000</ServerToClient>
 <ClientToServer>5000000</ClientToServer>
 </BandwidthCap>
 <BandwidthDetection enabled="true">
 <MaxRate>-1</MaxRate>
 <DataSize>16384</DataSize>
 <MaxWait>2</MaxWait>
 </BandwidthDetection>
 <MsgQueue>
 <Live>
 <MaxAudioLatency>2000</MaxAudioLatency>
 <MinBufferTime>8000</MinBufferTime>
 </Live>
 <Recorded>
 <MinBufferTime>2000</MinBufferTime>
 </Recorded>
 <Server>
 <BufferRatio>0.5</BufferRatio>
 <Prioritization>false</Prioritization>
 <MinQueuedVideo>64</MinQueuedVideo>
 </Server>
 <Diagnostic>
 <Enable>false</Enable>
 </Diagnostic>
 </MsgQueue>
 <HTTPTunnel>
 <IdlePostInterval>512</IdlePostInterval>
 <IdleAckInterval>512</IdleAckInterval>
 <MimeType>application/x-fcs</MimeType>
 <WriteBufferSize>16</WriteBufferSize>
 </HTTPTunnel>
 <MaxMessageSizeLosslessVideo>0</MaxMessageSizeLosslessVideo>
 <OutChunkSize>4096</OutChunkSize>
 <AggregateMessages enabled="true"></AggregateMessages>
 <Access>
 <FolderAccess>false</FolderAccess>
 <AudioSampleAccess enabled="false"></AudioSampleAccess>
 <VideoSampleAccess enabled="false"></VideoSampleAccess>
 </Access>
 <UserAgent override="yes">
 <Bits from="WIN 6,0,0,0" to="WIN 7,0,55,0">0x01</Bits>
 <Bits from="MAC 6,0,0,0" to="MAC 7,0,55,0">0x01</Bits>
 </UserAgent>
 </Client>
 <Debug>
 <MaxPendingDebugConnections>50</MaxPendingDebugConnections>
 <AllowDebugDefault>false</AllowDebugDefault>
 </Debug>
 <HTTP>
 <HTTP_1_0>false</HTTP_1_0>
 <Verbose>false</Verbose>
 <Connections>
 <MaxTimeout>60</MaxTimeout>
 <Reuse>true</Reuse>
 <Interface></Interface>
 </Connections>
 <Proxy>
 <Host></Host>
 <Port></Port>
 <Type>HTTP</Type>
 <Tunnel>false</Tunnel>
 <Username></Username>
 <Password></Password>
 </Proxy>
 <Redirect>
 <Allow>true</Allow>
 <Max>10</Max>
 <UnrestrictedAuth>true</UnrestrictedAuth>
 </Redirect>
 </HTTP>
 <SWFVerification enabled="false">
 <SWFFolder></SWFFolder>
 <MinGoodVersion></MinGoodVersion>
 <DirLevelSWFScan>1</DirLevelSWFScan>
 <MaxInitDelay>5</MaxInitDelay>
 <FirstHashTimeout>5</FirstHashTimeout>
 <FinalHashTimeout>60</FinalHashTimeout>
 <UserAgentExceptions>
 <Exception from="" to=""/>
 </UserAgentExceptions>
 <Cache>
 <TTL>1440</TTL>
 <UpdateInterval>5</UpdateInterval>
 </Cache>
 <ConnectionBlocking enabled="false"/>
 </SWFVerification>
 <Logging>
 <Access>
 <Checkpoints enable="false">
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 -->
 </Access>
 </Logging>
 <DisallowedProtocols></DisallowedProtocols>
</Application>
Vhost.xml
<VirtualHost>
 <AliasList>
 <Alias name="alias1"></Alias>
 </AliasList>
 <AppsDir>${VHOST.APPSDIR}</AppsDir>
 <ResourceLimits>
 <MaxConnections>-1</MaxConnections>
 <MaxEdgeConnections>-1</MaxEdgeConnections>
 <MaxAppInstances>15000</MaxAppInstances>
 <MaxStreams>250000</MaxStreams>
 <MaxSharedObjects>50000</MaxSharedObjects>
 <AppInstanceGC>-1</AppInstanceGC>
 </ResourceLimits>
 <VirtualKeys>
 </VirtualKeys>
 <VirtualDirectory>
 <Streams></Streams>
 </VirtualDirectory>
 <DNSSuffix></DNSSuffix>
 <Allow>all</Allow>
 <Proxy>
 <Mode>local</Mode>
 <RequestTimeout>2</RequestTimeout>
 <Anonymous>false</Anonymous>
 <CacheDir enabled="false" useAppName="true">
 <Path></Path>
 <MaxSize>32</MaxSize>
 </CacheDir>
 <LocalAddress></LocalAddress>
 <RouteTable protocol="">
 <RouteEntry></RouteEntry>
 </RouteTable>
 <EdgeAutoDiscovery>
 <Enabled>false</Enabled>
 <AllowOverride>true</AllowOverride>
 <WaitTime>1000</WaitTime>
 </EdgeAutoDiscovery>
 <SSL>
 <SSLVerifyCertificate>true</SSLVerifyCertificate>
 <SSLCACertificatePath></SSLCACertificatePath>
 <SSLCACertificateFile></SSLCACertificateFile>
 <SSLVerifyDepth>9</SSLVerifyDepth>
 <SSLCipherSuite>ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH</SSLCipherSuite>
 </SSL>
 -->
 <AggregateMessages enabled="true">
 </AggregateMessages>
 </Proxy>
 <Logging>
 <Access>
 <Checkpoints enable="false">
 <LogInterval>3600</LogInterval>
 </Checkpoints>
 -->
 </Access>
 </Logging>
</VirtualHost>

Hello guys,
thanks for replying.
All intances spent 24h playing/streaming as expected but today some of them went down.
Any idea why this core is being deactivated?
master.log
2011-04-20 16:30:54 16109 (i)2581172 System memory load (90) is now below the maximum threshold. -
2011-04-20 16:30:55 16109 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:18 16109 (i)2581226 Edge (16129) is no longer active. -
2011-04-20 18:36:18 16109 (w)2581255 Edge (16129) _defaultRoot__edge1 experienced 1 failure[s]! -
2011-04-20 18:36:18 16109 (i)2581224 Edge (28483) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1". -
2011-04-20 18:53:25 16109 (i)2581223 Core (16132) is no longer active. -
2011-04-20 18:53:25 16109 (i)2581221 Core (28621) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 18:57:25 16109 (i)2581223 Core (28621) is no longer active. -
2011-04-20 18:57:25 16109 (i)2581221 Core (28814) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app "registry" -inst "registry" -tag -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:registry:registry:".-
2011-04-20 19:00:15 16109 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:28 16109 (i)2581223 Core (16752) is no longer active. -
2011-04-20 19:00:28 16109 (w)2581256 Core (16752) _defaultRoot_:_defaultVHost_:::_1 experienced 1 failure[s]! -
2011-04-20 19:00:28 16109 (i)2581221 Core (29004) started, arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app -inst -tag "_1" -conf "/opt/adobe/fms/conf/Server.xml" -name "_defaultRoot_:_defaultVHost_:::_1".
core.log
2011-04-20 16:30:56 16132 (w)2581171 System memory load (91) is high. -
2011-04-20 18:36:16 16752 (i)2581247 Core (16752) disconnected from edge. -
2011-04-20 18:36:16 16548 (i)2581247 Core (16548) disconnected from edge. -
2011-04-20 18:36:16 16962 (i)2581247 Core (16962) disconnected from edge. -
2011-04-20 18:36:16 16132 (i)2581247 Core (16132) disconnected from edge. -
2011-04-20 18:36:21 16962 (i)2581246 Core (16962) sending register cmd to edge. -
2011-04-20 18:36:21 16752 (i)2581246 Core (16752) sending register cmd to edge. -
2011-04-20 18:36:21 16548 (i)2581246 Core (16548) sending register cmd to edge. -
2011-04-20 18:36:22 16132 (i)2581246 Core (16132) sending register cmd to edge. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:53:27 28621 (i)2581246 Core (28621) sending register cmd to edge. -
2011-04-20 18:53:30 28621 (w)2581171 System memory load (99) is high. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 18:57:27 28814 (i)2581246 Core (28814) sending register cmd to edge. -
2011-04-20 18:57:29 28814 (w)2581171 System memory load (99) is high. -
2011-04-20 19:00:16 16962 (i)2581172 System memory load (61) is now below the maximum threshold. -
2011-04-20 19:00:15 28814 (i)2581172 System memory load (66) is now below the maximum threshold. -
2011-04-20 19:00:16 16548 (i)2581172 System memory load (61) is now below the maximum threshold. -
#Date: 2011-04-20
#Fields: date time x-pid x-status x-ctx x-comment
2011-04-20 19:00:29 29004 (i)2581237 Starting admin app on core (29004). -
2011-04-20 19:00:29 29004 (i)2581238 Core (29004) connecting to admin. -
2011-04-20 19:00:29 29004 (i)2581231 Core (29004) connected to admin. -
2011-04-20 19:00:29 29004 (i)2581234 Core (29004) connection to admin accepted. -
2011-04-20 19:00:29 29004 (i)2581246 Core (29004) sending register cmd to edge. -
# free -m
 total used free shared buffers cached
Mem: 7993 6076 1917 0 4 34
-/+ buffers/cache: 6037 1956
Swap: 3147 1558 1589
thank you!

HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

PC is not going to sleep or shut down after upgrade to Windows10

Hello,I upgraded my laptop from win 8.1 to win 10.Now when I close the lid or press the power button, the computer turns the screen off, turns the WIFI off, no more hard disk activity but it is not going to sleep.Also when I shut it down it goes throught the same procedure but never turns off.To start again, I have to keep pressing the power button to turn it off, then turn it on again.I did the powercfg - energy and got this in the report, "USB Suspend:USB Device not Entering Selective Suspend"When the computer had just started, I don't get that message, it also goes to sleep and shuts down normally, while later, I get this message in the report and no longer sleeps or shuts down.Any suggestion ??Thanks

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15 Notebook and issues with sleep or shut down after upgrade to Windows 10. Try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. HP has been working closely with Microsoft on the development of Windows 10. I hope this helps. Thanks.

Firefox installation made my power saver function misfire - the system goes down after a few minutes of inactivity but then comes right back on again after a few seconds.

My power management scheme: turn off monitor after 2 min of inactivity; turn off hard discs after 5 min of inactivity. doesn't work reliably anymore. Usually, with Firefox installed, the system powers down after the preset times but then comes right back on again after a few seconds. If I restart the machine, my selected power management scheme works properly for a few cycles but then reverts to the mode of turning back on after a few seconds after having shut down.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric). Please help me. It is urgent for me. Thanks in advance.

Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
The product will pause longer between printed pages until it cools down.
Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options. Thanks,

Row of an output goes automatically down after printing 1/2 screen?

Similar Messages

Maybe you are looking for