Row Total in PLD

How can I show in the Offert document the total of the row including the VAT instead the without VAT ?
There is a variable 0 , if I use variable 185 this show the same.
Giuseppe

Giuseppe,
Could you get this total without VAT and the VAT value in the same row in PLD? If yes, add a new Formula Field to sum them.
Thanks,
Gordon

Similar Messages

Showing Zero Unit Price/Row Total

Hi,
We currently allow posting rows for item sales with zero unit price. I am having trouble showing the unit price and row total as "$0.00" instead of a blank field with PLD. Both of these fields are system variables (80 and 84), neither field is linked to itself, and neither field has the 'Suppress zeros' box checked. Any possible solution to this? Thank you.

Hi there,
You could try using a formula type field and multiplying your system variable field by 1.
- Say for example your Unit Price field has a Unique ID of F_100.
- Create a new line Formula field and set its value to Round(F_100*1,2).
- This will display your zero value unit price as 0.00.
- Note that I'm only using Round() to display zeros after the decimal place, otherwise the zero value unit price would appear as 0. So change the number of decimals as required.
- Unfortunately this removes the currency code display from the value so you will need to re-display it if required, you can do this using a database type field and selecting the Price Currency field.
Do the same for row total. Hope that helps.
Regards,
Andrew.

Discoverer Report Row Total

We are running Oracle BI Discoverer Viewer version 11.1.1.4.0. When we upgraded to this version we lost some functionality. In the previous version the report displayed the number of rows the query returned. Now the row totals display only under certain conditions. For instance, I have a inventory report name INV-REP-120 and it prompts the user for 6 parameters & displays 6 columns of data. One of the parameters is named ‘Keyword' and I’ll use this one in the problem description. When I set the keyword parameter to ‘HINGE’ The bar at the top of the results sheet it displays:
‘Rows 1-25 of 81, Columns 1-6 of 9’
When I change the keyword to ‘TUBE’ the viewer displays:
‘Rows 1-25, Columns 1-6 of 9’
The total rows are not displayed but the number of pages. It appears that if the total number of rows is less than 200 then the row total is displayed. I changed the rows displayed from 25 to 100 and scrolled down to the last page and now the reports displays:
‘451 – 458 of 458, Columns 1-6 of 9’
When I use the key word TEE I get :
‘Rows 1-50, Columns 1-6 of 9’
There are 596 tees, which would be about 12 pages of 50 rows. I noticed that at the top of table there is a field ‘Page 1 of 5.’ It looks like if there are more than 5 pages it does not display the total number of rows.
There seems to be some interaction between the total number of rows the number of rows per page and perhaps a setup on the back-end that determines whether or not the row total is displayed. How can I configure the viewer at the front-end and/or back-end to consistently display the row total for a report? Is there a Discoverer preference located in the pref.txt in the apps server that controls this?

Hi,
You can inform to your SP to edit the table EUL4_documents
and ask him to modify the name of the report that is stored in the column DOC_NAME .There is absolutely no necessary to open the work book that is stored in the database and change the work book name
Regards
Swamy!

Row total percentage of Column

Have a request to display both the row and column totals in a pivot table, no problem. But what about also including a the percentage that each row total represents of the column total:
Example:
orders
Item jan feb march total % of total
a 1 3 5 9 40%
b 2 2 3 7 33%
c 3 1 2 6 27%
total 6 6 10 22 100%
Thanks.....

In the pivot table view click on the measures and "Duplicate" the measures column and display the total as percentage of the row or column based on your requirement. That way you will be able to display both the toals and percentages together
hope it helps
Thanks
Prash

Row Total issue in table view

Hi,
I am using 11.1.1.5. In table view we have 4 dim and 5 facts. I need row total only for 3 facts. Whenever I set total using sigma(E) I am getting total for all 5 facts. How to calculate row total only for 3 facts only?.
Thanks.

977610 wrote:
Hi,
I am using 11.1.1.5. In table view we have 4 dim and 5 facts. I need row total only for 3 facts. Whenever I set total using sigma(E) I am getting total for all 5 facts. How to calculate row total only for 3 facts only?.
Thanks.In Criteria mode, click on the fx button and change the aggregation rule from "Default" to "None."

BP Aging Anamolies (Period amounts and Row total anamoly)

Hi All,
Is there a known bug with the Customer Receivables Ageing Report and Suppliers Liabilities Ageing Report in SAP B1 v2005A PL 18?
When trying to produce Backdated BP Aging report;
1. The Total amount for several BP accounts reflected on the ageing report match the respective BP account balance as at the selected date, but the ageing amounts across the page (ageing intervals) do NOT correctly cross-add to the row Total
2 The Grand total of the Total column of the ageing report does NOT agree to the balance of the corresponding GL control account as at the "Posting date: To"
3. The rogue BP accounts involved all seem to have had some "reversing" transactions which give rise to the variance, such as: JE debits which have been included in the calculation of the account balance/row Total (often = Nil) of the BP report, but do NOT appear to have been included in the total of the interval in which the JEs occurred.
Incoming Payments that have been cancelled, such that the debit transaction (the reversal) has been included in the calculation of the account/row Total (often = Nil) of the BP report, but does NOT appear to have been included in the total of the interval in which the cancellation occurred.
Report Selection Criteria:
Customer/Supplier group: All
Interval: Periods
Ageing date:
From: blank
To: prior end-of-period date
Posting date:
From: blank
To: prior end-of-period date
Due date
From: blank
To: blank
Document date:
From: blank
To: blank
By Journal postings:
Display Customers/Suppliers with Zero Balance = Yes
Display Reconciled Transactions = No
Consider Reconciliation Data = Yes
Thanks in advance
Regards
Devinder

Hi Gordon,
Thannks a lot for pointing to the thread; however this thread does not answer my query. I am sure there must be SAP Note that explains my issue however I am waiting for someone to point me in the right direction.
Thanks once again
Regards
Devinder

SSRS - % percentage ROW TOTALS don't calculate correctly in a Table Matrix

SSRS - Report Builder 3.0
I have created a report with a MATRIX table with a TOTAL ROW and a TOTAL COLUMN and the total column is calculating correctly but the ROW totals is not calculating correctly
The screen shot below is of the Matrix table in the Report Builder 3.0 "Designer view"
When I run the report the column totals the percentage is averaged correctly, but the ROW TOTALS do not, some are close but i need them to be accurate.
If you take the same data into excel the total percentage calculates correctly - if you compare the excel with the SSRS some rows do calculate close, but not accurate. the total column calculates correctly
FY13-Q4
FY14-Q1
FY14-Q2
FY14-Q3
Total
100%
89%
65%
68%
80%
50%
72%
43%
45%
52%
100%
91%
63%
69%
81%
10%
17%
29%
31%
22%
100%
96%
67%
76%
85%
70%
70%
53%
64%
64%
90%
93%
90%
82%
89%
74%
75%
59%
62%
68%
I Need the totals rows and columns to average the percentage correctly in the SSRS report.
Please help...
-Isaack

Hi Katherine Xiong,
The formula (SSRS Expression) i am using is the following
=Sum(IIf(Fields!AnswerText.Value = "Yes", 1, 0)) / (Sum(IIf(Fields!AnswerText.Value = "No", 1, 0)) + Sum(IIf(Fields!AnswerText.Value = "Yes", 1, 0)) + Sum(IIf(Fields!AnswerText.Value
= "n/a", 0, 0)))
Basically if field value = "YES" it counts, if the answer = "No" if the value is = "n/a" it should not count in the total score percentage
I get the correct PERCENTAGE on the 1st aggregate, but when the table has multiple aggregates the percentage is never accurate.
The Table below is using the above formula, the 1st aggregate is correct but if you get the average percentage from the 1st column it should be 86.2% is the accurate number, sometimes close but i want to report accurate numbers and not doubt SSRS reports
compared to excel reports.
TOTAL ROW (highlighted on the screenshot in Yellow) is incorrect aggregate averages %, the correct average are the following
[86.2%] [71.5%] [75.5%] [87.87%] [90.2%] [69.9%] [92.8%]
-Isaack

Stored procedure for Total in Header from row totals

Hi Experts,
I have read all notes written before regarding that how can we solve that problem if we would like to display on header a rowtotal. But i cannot solve it when i need it dinamically.
I copy the following query into SBP_SP_Transactionnotification but while im adding the document it doesnt refresh . I have to go back then i can see the row totals in my field.
IF @object_type = '18'
BEGIN
UPDATE OPCH SET U_ONELT =
(SELECT SUM(U_ONELTR) FROM DBO.PCH1 T0 WHERE T0.DOCENTRY = @list_of_cols_val_tab_del)
WHERE DOCENTRY = @list_of_cols_val_tab_del
END
How shall I modify this query?
Thanks in advance.
Eszter

This is the code you could use
IF @transaction_type = 'A' AND @object_type = '18'
BEGIN
UPDATE OPCH SET U_ONELT =
(SELECT SUM((T0.QUANTITYT0.PRICE)-(T0.QUANTITYT0.U_ONELTR)) FROM [DBO\].[PCH1\] T0 WHERE T0.DOCENTRY = @list_of_cols_val_tab_del)
WHERE DOCENTRY = @list_of_cols_val_tab_del
END
You can access this Stored Procedure from SQL Server Management Studio......Click on Databases...Select your database...Programmability.....Stored Procedure dbo.SBO_SP_TransactionNotification...Right click....select Modify
Copy the above code in the body ...You would probably see some thing like ADD YOUR CODE HERE....
Once you copied this code. Click the Execute button and you see should get the message
Command(s) completed successfully.
Close SQL Server and you should be good to go...
Suda

To show Local Currency row total in FC documents

Hi All
is there any possible to show LC row total on the screen when I enter a FC document in SAP B1?
Thanks in advance.
Regards,
Catea k
Edited by: Catea k on Aug 31, 2010 6:55 AM

Hi,
You could use UDF for header level and assigned query formatted search to the udf so that the value in the udf is automatically entered.
You could also use SDK code to display LC total of document beside FC total document. The same solution is applicable for row level of document.
JimM

Remove the word "Total" in Row Totals in Pivot Tables

Hi,
Is it possible to remove the word "Total" that appears in Row Totals in Pivot Tables?
Eg. If there are 2 Dimension Columns -- Year and Month .... and if we do row totals on Year
The total appears as *'2008 Total'* or *'2009 Total'* etc. i.e. Each of the Values is followed by the word 'Total'.
However, i would like the totals to display only the values '2008' or '2009' without the word 'Total'.
Is this possible in OBIEE 11.1.1.5.0 ?
Thanks,
Ab

Hi ,
Goto Total -> Format label and type in @.This will remove the word"Total". I have tested this in 10g, try this and let me know if it works in 11g.
Rgds,
Dpka

Row totals in datagrid

Hi,
I have a datagrid with 5 rows and 3 columns and i am able to
load data into it using http service but i want to calculate totals
of each row and i have to print them on the labels placed below the
datagrid for each column
i want to calculate the row totals and display it on the
label
plz find me some solution
thanks

I guess one way to do it would be to calculate the total from
your webservice (I am guessing you're using php to generate an xml
file) and then pass that to your flex project using the http
service.
or you could simply write a script for it within your
project.

BAM : Crosstab : Need to get percentage of row total for each cell

Hi,
I am new to BAM. I have a requirement for which I am using crosstab. Basically, I need to show number instances per human task per user. Human Task is the row header, user is the column header, and I am using count(instance id) to fetch the count of instances. I am able to show the sum of values for each row and column, but I also need to show the percentage for each cell(based on row total).
I do not know if it is possible to fetch the total for further calculations. I believe the calculated field will be processed for each cell, and hence there will be no sum available.
Also, crosstab does not have a percent of total aggregate function.
Kindly advise.
Regards,
Himanshu

Hi,
For constructing summary, COLLECT is very useful.
1. Create one new internal table STAB having two fields.
a) licensetype
b) cnt
2. Suppose your original internal table is itab.
Loop at ITAB.
STAB-licensetype = itab-licensetype.
STAB-CNT = 1.
COLLECT STAB.
EndLoop.
3. In this way, you will get DISTINCT license types, and their count.
Hope this helps.
regards,
amit m.

Repeate Row Totals on every horizontal pages in Crosstab.

Hi
I have a crosstab which grows multiple page horizontally.
I have Row totals that are displayed on the left of summary. I want to display this totals on every horizontal page.
Can anyone tell mw how to achieve this.
I am using Crystal Reports XI with SP as data source.

Hi Narayan
Right Click on the Cross Tab->Cross-Tab Expert-> Customize Style tab.
Select the 'Horizontal' option under summarized Fields:
Select the 'Repeat Row Labels' option under 'Grid Options'
Click 'OK'
However it is not possible to dispaly the row totals for the data dispalyed on that particular page.
Because the data is calulated for the entire cross-tab.
Hope this helps you.
Please let us know if you need any further information.
Regards
Ashwini Yadav

Document Settings - Calculate the row total using the unit price

Hi All,
I'm using SAP2007A PL37, the option "Calculate the row total using the unit price" in Document Settings is no longer available. Is there any updates on this issue?
Thank you,

Hi Marlon,
In 2007A, by default, new database would be created without this
checkbox activated.
However, there is a way to bring this checkbox back to the configuration
screen, even if it is a DB newly created in 2007A. In order to do so it
is necessary to do as follows:
1) Open B1 2007A
2) Go to Help -> Support Desk -> Activation Request
3) Copy the ASCII string that appears in the top textbox ("Customer
Request Code").
4) Open a Support ticket stating that you want the "Calculate Row Total
by Unit Price" checkbox activated for the specified system (Copy the
string in the step 2) into a text file and attach it to the message).
5) VERY IMPORTANT: State in the message also the Business Impact leading to this request. In your case you should just say that your AddOn needs this option changed in order to work correctly.
6) You will receive a reply from B1 Support with a number to be entered
in the "SAP Support Code" textbox in Help -> Support Desk -> Activation
Request
7) Click on OK and the checkbox will be displayed thereafter.
Hope this can be helpful.
Best Regards
Helen Sun

Row Total

Using a formatted search is there a method to total a column for several row items? Eg Total gross profit for a sales order.
Regards
Zabe

Hi Zabe,
I was just going over some older posts when I saw yours again.
In the meantime, I know the answer: No, this is regrettably not possible for unsaved data.
Regards,
Frank

Row Total in PLD

Similar Messages

Maybe you are looking for