Rows Per Page doesn't affect the number of records displayed

I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
Has anyone else experienced this problem?
Tony

Yes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
Report Template
Pagination Scheme
Enable Partial Page Refresh
Display Position
Number of Rows/Number of Rows Item
Maximum Row Count

Similar Messages

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to change the number of records displayed on personnel profile?

Hi Experts！
1.The thing which I would like to do is as a title.
2.And There is a part it is considered that is a change part.
However, the method of changing that is not known.
I need your help also with the direction and right or wrong which the modification method of the number of display records understands.
Best Regards！

Hi jyothi.
thank you for your reply!
>Change the visible row count as 1 and check.
I changed.
but change was not shown in the display of the number of the line.
when 「rendering style 」was changed, change was shown in the display of the number of th lines.
but we need 「row repeat」 style.
regards.

Set Maximum Rows Per Page not working

I want to display 50 rows per page and I tried the below but still I can see the default 15 rows per page.
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
Set to = 50
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Rows Per Page Selector
Removed the check mark and still shows 15 rows per page.

Run your report. Set the Rows to 50. Press Go. Select 'Save Report' from the 'magic wheel' menu and next select 'Save as default report settings'.
It is a rather long way, but seems the only one...
Roel

HOw to fix No of Rows per page in SSRS

HI,
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
Thanks in Advance.

I need to do 100 rows per page. I tried the technique above but I am still just getting about 16 rows per page. (I believe I followed the instructions correctly.)
I know...100 rows is a ton but the users want it (and, thus, my boss wants it). They only display the report; they do not print it.
Here is what I did...
1. Right click on the table
2. Select Properties
3. Select the Groups tab
4. Select Add...
5. Enter a group Name: "Group_for_PageBreak" (I have no other groups)
6. Enter an expression: =Ceiling(RowNumber(Nothing)/100)
7. Uncheck "Include group header" and "Include group footer"
8. Check "Page break at start"
9. Select "OK"
Re #6, I also read to try this so I did: =CInt(Ceiling(RowNumber(Nothing)/100))
Re #8, I also tried "Page break at end"
Is "Details grouping..." relevant?
Thanks.

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

The number of rows per page is greyed out when running in background?

Hi,
For a customized transaction the number of rows per page cannot be set when running in background.
While a background job is created in SM36 after entering the report name and the selection variant name in the properties of Format the rows and columns field is greyed out.It was not editable.
Is there any settings to be done or in the custom program any code change needs to be done?
Thanks in advance.
Regards,
Sharon.

Hi Gabriel,
After double clicking the format only the rows field is not set to edit.It was greyed out.Is it anything related to the printer settings that will be maintained for a user?
Regards,
Sharon.

How to set number of rows in "Rows Per Page Selector" in Interactive Report

Hi Guys,
Is there any way to set the number of rows in "Rows Per Page Selector" in Interactive Report. By default it is set to 15.
I know one way is to change the number of rows when you are running the report and then set that as 'Default Report Setting'.
If anybody is aware of any other way, please let me know.
Cheers,
Ashish Agarwal
http://www.dbcon.com.sg

Hi Pavel,
can you please specify your question more clearly. If you are on NW 7.0 you can determine a number of colums for your filter item with following command:
COLUMNS
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
If you meant the amount of rows within the analysis item you can use following command within your analysis item:
BLOCK_ROWS_SIZE (numbers of rows displayed at once)
BLOCK_ROWS_STEP_SIZE (numbers of rows to be scrolled for one step)
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/489d39d342de00e10000000a11402f/content.htm
Brgds,
Marcel
Edited by: Marcel Landsfried on Feb 10, 2009 7:45 PM
Edited due to wrong url

Problem with number of rows per page ....

Hi,
I have a updatable report .This is a dynamic report which can have more than 100 columns depending on the table name .I have set number of rows =15 in layout and pagination .Its displaying 15 rows per page .My requirement is 50 rows per page .So i changed to 50 in layout and pagination .Its displaying 50 rows per page .But when i select some button in that page or move to other tab i get "page not found "error .If i replace back to 15 rows per page ,everything works fine ...Dont know why this is happening ..Please help..
Thanks in advance ....

Hello,
You can use Maximum Records per page property of Repeating
Frame.
Adi

Disabling the display maximum rows per page

My project include many reports with table view, displaying 100 rows.
There is always arrows icon with the option to display maximum rows per page.
If user click on that option the OBIEE crashed, since there are a lot of rows.
I cannot decrese this number since all rows are required for other charts views.
a. Is there a way to set this parameter only for the table view?
b. Is there a way to disable this icon or not presenting it to the user?
c. Is there global way to coonfigure the default displayed rows number (e.g. from 100 to 20)?

unfortunately, you are limited to the SRW built-ins in Reports as far as setting object properties is concerned. I have checked this with the Metalink staff and I did get an admission out of them that this is true.
You can set the property in the property palette, but I'm not sure that this helps you as I take it you have a condition you would like to implement. I wish I could help you further, but Reports is limited in some areas, and setting object properties programmatically is one of them.

Changing Maximum Number of Rows Per Page to Include

I am trying to change the "Maximum Number of Rows Per Page to Include" using Enterprise Manager > Coreapplication > Capacity Management > Performance.
It was default to 75. I need to change it to around 5,000. I have a report which generates 5,000 records and I use Agent to send it to our user at a scheduled time.
I change 75 to 5000, activate the changes and restart the BI. After restarting it automatically reverts back to 75.
Has anyone experienced this?
My instanceconfig has contains this:
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>5000000</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>5000000</DefaultRowsDisplayedInDownload>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>2000000</MaxVisibleSections>
</Table>
</Views>
Any help would be greatly appreciated.
Thanks!

Hi,
Editing in EM should change the settings. Stop all the services and restart
In the individual reports for tables and pivot tables >> Edit the table properties and add the number of 'Rows Per Page'
Hope this helped/ answered
Regards
MuRam

How to make a table to display perticular number of rows per page??

Hi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.

Hi Tony ,
Just wanted to know will this solution work ;
I am having a report and its using a grouping expression on “Group on
(=Field!Salelocation)” when it add another group on the details and have the page calculation such as (=Ceiling(RowNumber(Nothing)/20))
and assign the page break at to the point of saving its ok , when trying to upload the report then it throws the following error .
I have tried your solution trying to give the page calculation the upper group but still the following error comes back
“A group expression for the grouping ‘table2_Group1’ uses the RowNumber function with a scope parameter that is not valid. When used in a group expression, the
value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
A group expression for the grouping ‘table2_Group2’ uses the RowNumber function with a scope parameter that is not valid. When
used in a group expression, the value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
Will you able to assist me on this.

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

Limit the number of records per page in webi

Hello All,
How do i limit the number of records per page in webi?
i was asked to have not more than 20 records per page.
In " NUmber of Vertical records per page"(Quick display mode) the default value was 100, i am trying to set it to 20 ...but its not updating....its still taking 100.
I am on BO XI 3.1 Sp2 fix pack 3
Please let me know a way to accomplish this.Any inputs appreciated
Thanks

It can be done as follows:
1. create a variable at report level as:
v Test = Floor(RowIndex()/20)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section (also you can apply break).
4. Go to structure mode select section\break and go to properties tab and select the property "Start on new page".
Regards,
Rohit

Limit rows per page, include spacer and format last row on page break

Hello,
I am new to BI and would like some help with an issue I don't seem to be able to resolve?
I have a table that uses two xml group elements (2nd nested inside first) to produce my detail lines.
Example:-
First for-each loop runs over shipto details and within this another for-each loop runs over items related to that shipto, all of which results in multiple detail lines.
I need to limit the number of rows per page and should the data roll over to the next page I need to place a horizontal closing border on the first page's table (only using column borders).
Also when the data does not fill the page I need to add spacer rows to the page limit?
I have tried using examples found in these forums, position(), counters etc… but due to having the second detail loop I’m unable to get these working or I’m doing something wrong?
Your help would be greatly appreciated.

Hi BIPuser, thanks for the links.
I have tried some of the examples which I can get working with a single level of detail lines. However when I add the second level of detail lines the position() function seems to fail as my rowlimit appears to be ignored.
I am also unable to get the $lpp example working because the outer detail loop may only have one xml element and therefore BI assumes only one line is to be printed when in fact the inner xml element detail loop may have further multiple lines. I need to effectively count the outer & inner loops as one to determine the number of lines being processed.
Example of xml - My table for detail lines needs to include both ShipTo & item number lines grouped as shown, thereby counting & outputting 7 lines in this instance.
<INVOICE>
<On_Ship_To_S23> Outer loop
<On_itm_num_shr_row_S21> Inner Loop
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
<On_Ship_To_S23>
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
</INVOICE>

Rows Per Page doesn't affect the number of records displayed

Similar Messages

Maybe you are looking for