Roxio Creator 2009 And Desktop 4.7

I just reinstalled Vista 32 on my pc. I also just installed Roxio Creator 2009, and I need to reinstall my Blackberry Desktop software. I see that the latest version is 4.7, and it comes in two flavors: with and without Roxio Media Manager.
I suspect that, because I have Roxio's latest version, I don't want the Media Manager from Blackberry Desktop Manager. If I were to load both, I might create conflicts or other problems. Am I correct to rely upon Roxio Creator 2009 and load the Desktop 4.7 without Roxio Media Manager?
I'd like to keep my pc as clean as possible. Reinstalling software is no fun.
Solved!
Go to Solution.

Hello Stecyk,
You are indeed correct, if you were to install Media Manager with other Roxio software installed, it will cause conflicts and possibly break both apps.
If you do not want to use Media Manager, you can always enable mass storage mode on your BlackBerry and drag and drop the files via My computer.
Enable Mass storage mode:
http://www.blackberry.com/btsc/KB13564
Roxio Media Creator becomes corrupt when BlackBerry Desktop Software with Roxio Media Manager is installed
http://www.blackberry.com/btsc/KB14476
Hope that helps!
Cheers

Similar Messages

Roxio Creator 2009 No Longer Works

I am using Vista 32 bit O/S with all the patches.
When I upgraded to the latest Desktop version (version 96) of the software recently, I found that my Roxio Creator 2009 no longer works. I can't even open the application up. When I go to start the Roxio software, I just get a message that "Roxio Creator has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
Any suggestions for getting my Roxio Creator software to function again?
Solved!
Go to Solution.

What does this have to do with Blackberry?
Before the upgrade, it worked. After the upgrade, it doesn't work. That's what it has to do with BlackBerry.
Did this occur after installing DM?
Yes.
Did you install Roxio Media Manager?
Not to my knowledge, although I am not certain. I tried to avoid installing the Roxio Media Manager. I just see on my Desktop software:
- Applications
- Organizer
- Media Sync
- Music
- Pictures
- Videos
When I go About BlackBerry Desktop Software and View details on installed components, I don't see anything related to Roxio.
Where do I check to be sure?
If so, that does interfere with other installations of Roxio. You'll need to uninstall Roxio Media manager and reinstall your othe Roxio software.
Again, I don't believe that I loaded Roxio Media Manager. I am not sure where to check.
If required, how do I uninstall Roxio Media Manager from BlackBerry new desktop software?
Additional Comment Below
If you follow this thread, you will see that I deliberately tried to keep my Roxio and BlackBerry software separate: http://bit.ly/crTlum (points to BlackBerry forum post)
I would appreciate further advice and assistance.

Creative MediaSource 5 and Roxio Creator 2009 Incompatabilit

Hi,
I would just like to bring to your attention what appears to be a program incompatability between one of the Roxio 2009 Creator Suite applications and Creai've MediaSource 5.
When the end-user installs the suite, and updates, and reboots, if the user were then to launch Creative MediaSource 5, it will launch the Windows Installer and begin configuring CinePlayer and ask for the install media.
This will happen everytime the application is launched.
If you require any further information for diagnostics purposes, please let me know.
Andrew.

I?have both?Roxio Creator Suite 2009 ultimate version ..0 build B0E and Mediasource 5.20.23 on my PC (XP SP3) and do not observe that. Mediasource organiser or player open normally, no windows installer launch. Roxio Cineplayer works normally, as do all other parts of the suite.
However, I have not (yet) had?any updates to creator 2009 offered, so maybe that update you mention?is what causes the problem in your case. On the Roxio boards, some report getting offered an update, others not. You could check out there, see if anyone has similar problem, or post there.
http://forums.support.roxio.com/index.php?act=idx
Message Edited by JRosenfeld on -03-2008 2:04 AMMessage Edited by JRosenfeld on -03-2008 2: AM

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences I-Photo. Does anyone know what the problem could be?

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?

Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie

Photoshop Premiere Elements 11 and Roxio Creator

Hi,
when installing the above software there was a message saying 'Unable to stop Roxio Creator' but the installation continued and seems to be fine.
I do not use Roxio Creator I think it came with the PC (Dell).
Will this cause problems in the future and should I remove it?
Thanks.

If your computer came with Roxio, and it is in your startup list so it runs every time you start your computer, you MAY have problems creating a DVD
Do you know how to analyze what is in your startup, and STOP a program from starting every time you start your computer?
If not, search at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
This is about Encore, but the idea is the same when it comes to PreElements and writing a DVD
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and
then use the FREE http://www.imgburn.com/index.php?act=download to write files or
folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like
his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as
the box label (Memorex is notorious for buying "anything" and putting it inside a
Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your
burner has the best chance to create "good, well formed" laser burn holes... since no
DVD player is required to read a burned disc, having a "good" one from a high quality
blank will help
Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable
Two layer

Roxio Creator 2010 not installing on Windows 7

I recently installed Window 7 Home Premium via a clean install. Have been reinstalling programs as time permits. Had to upgrade to Roxio Creator 2010 as my older version would not work. First attempt at install gave an error stating that the installation had been interrupted. As I recall, it was when the installation routine was trying to install DirectX 9. This doesn't make sense since my computer shows DirectX 12 as being installed. The installation ended.
Subsequent tries at the installation have resulted in stoppages with the message "Setup has determined that your configuration does not support any of the included products".
I have been going back and forth with Roxio tech support without success. Thought that I would try here.
They have told me to uninstall Microsoft.NET Framework 3.5.1, then update both DirectX and Microsoft.NET Framework.
Microsoft.NET Framework (any version) does NOT appear in the "Uninstall or change programs" listing. It does, however, appear in the "Turn Windows features on or off" listing. It was first found to be turned off. I subsequently turned on all of its features. I understand that .NET is 'built-in' to W7. Is that why it doesn't appear in the "Uninstall...." list or do I have a problem there?
I downloaded dotnetfx35.exe and dotNetFx35setup.exe from the MS site. The User Account Control box appears when either is selected. When the "Yes" box is selected, each program appears to terminate without further action. Does this mean that the installation was previously completed?
When I tried the DirectX update, I got a message that I was at the latest level.
Roxio's "Clean Install" routine, their knowledgebase article 000207CR, was performed at least four times under different circumstances without success.

I had the same problem with the install at the point where the Roxio 2010 installer gets stuck on installing Microsoft.Net v3,5 SP1. I went back and forth with Roxio tech support and Microsoft for two weeks. Thanks to my IT background, I finally got Roxio Creator 2010 installed.
Here is the fix:
1.   Go to http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en and download "dotNetFx35setup.exe". Save it to your desktop.
2.   Go to "Turn Windows Features on or off" Deselect Microsoft.net 3.5 SP1.
3.   Then right click on the Roxio Digital downloaded file and choose the Compatibility mode tab.
4.   Change the Compatibility mode to "Windows Vista (Service Pack 2)".
5.   Use an unpacking program such as "WinRar" to Unpack the Digital download to a specific location.
6.   After unpacking, go to unpacked folder location "RoxioCreator2010".
7.   Then open the folder "DOTNETFX_351" and go to folder "wcu" and open the folder, go to folder "dotNetFramework" and open the folder.
8.   Replace the file "dotNetFx35setup.exe" you downloaded with the file in this folder.
9.   Then right click on the file "dotNetFx35setup" and change the compatibility mode to "Windows Vista (Service Pack 2)".
10. Now run the Roxio Installer. The installer will take at least 15 minutes or more to finish.
Good Luck!

WIndows 7 Ultimate WMP won't play MPG after installing Roxio Creator NXT Pro - Event ID 1000 (100)

HP dv7t-6100 CTO Quad Edition Win 7 Ultimate SP1 fully updated (sfc, CHKDSK and Malwarebytes scanned - all clean)
Seems like a simple DLL conflict per the Event Viewer details below:
Faulting application name: wmplayer.exe, version: 12.0.7601.18150, time stamp: 0x518c6df8
Faulting module name: dsfOggDemux2.dll, version: 0.80.15035.0, time stamp: 0x4f86e998
Exception code: 0xc0000005
Fault offset: 0x000042b7
Faulting process id: 0x1394
Faulting application start time: 0x01cf17b19b615a49
Faulting application path: C:\Program Files (x86)\Windows Media Player\wmplayer.exe
Faulting module path: C:\Program Files (x86)\Common Files\Roxio Shared\OGG_Flac Codecs\dsfOggDemux2.dll
Report Id: de83bdca-83a4-11e3-b32d-2c27d7a9fbb9
I uninstalled Roxio Creator NXT Pro (& used their cleanup program and CCleaner only on Roxio remnants) and the problem disappeared. Did a complete re-install of Roxio and the same problem came back. Curious as to why WMP would link to a Roxio
DLL anyway. BTW: Windows Media Center plays the same MPG files (w Roxiol) just fine so maybe not worth the $$$ below. Had no problem with WMP & Roxio Creator 2011 but the USB video capture device failed so I had to upgrade.
Per incident: Roxio wants $25 / MS wants $49. Thought I'd try "free" here first, not sure who owns this problem.
(I guess the ~$49 Roxio Easy VHS to DVD Converter package has NO SUPPORT and 65% ONE STAR Amazon reviews - support only for their "Premium Products") Maybe if they sold stuff that worked none of them would
need "support"!
TIA,
JCN

(a) My account is an administrator account.
(b) I did try turning WMP and WMC on and off independently within and without Roxio installed. Without Roxio WMP works fine. WMC works either way.
(c) I did several more uninstalls / re-installs of Roxio product including using Revo Unistaller and Roxio's c2011_systemclean.bat "clean-up uninstall tool"). None of which worked and even made it worse (see below).
My original key question still is: Why does WMP fault via a Roxio dll? dsfOggDemux2.dll (codec). How is this even possible for there to be such a linkage?
After all this effort now a clean reinstall of Roxio NXT Pro leaves me with this -->
RoxioCentrtalFx.exe (their master gatewte interface) will not start-up with this new error (and un-fixable):
Faulting application name: RoxioCentralFx.exe, version: 5.0.0.0, time stamp: 0x50077c71
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
Exception code: 0xe0434352
Fault offset: 0x0000c41f
Faulting process id: 0x1a40
Faulting application start time: 0x01cf1846d5b6b1cb
Faulting application path: C:\Program Files (x86)\Roxio Creator NXT\Roxio Central\RoxioCentralFx.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 18f55045-843a-11e3-981e-2c27d7a9fbb9
Although the two Roxio programs I use will start via shortcuts: mediacapture14.exe &
mediamanager14.exe
When the later program occasionally stops working, the application error, is via ntdll.dll which I noticed was updated in a series of Windows updates (about 12-14 of them) around the 8/27/2013 timeframe. I kind of don't believe in co-incidences.
My one and only Roxio Forum responder kind of suggested "why you and nobody else?" (having these problems, i.e., I am the crazy nut job here) to which I referred him to the hundreds of reviews on Amazon, etc that gave Roxio 2012 products, etc ONE STAR or
less (about 50% out of >300). I NEVER had this much trouble with Roxio 2009-2011. Must be that new Corel culture ownership sinking in.

Getting sound into roxio creator 9

last year I purchased an HP with windows 7. There are some radio programs I record from the internet with creator 9 but since windows 7 and realtek HD I can't get any audio from the soundcard to use the record feature. My older computer with windows xp and the same roxio program worked great. What's my problem?

EMC 9 was not designed for Windows 7 nor was Creator 2009. Creator 2010 is the current application made for Windows 7. I have all three versions.
If you are using Sound Editor then when you click on record audio you should see another window or drop down tab to select the audio source.
Go over to the Roxio support BB and post the question under the Legacy Applications EMC 9 and see what you get for an answer.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Photoshop Elements 12 vs. Roxio Creator

I currently own Roxio Creator 2011 from Costco. Now I see that Costco is selling PSE 12
Powered by Roxio. Is this a full featured PSE 12 or a slimmed downed version? Is it compatible
with Creator? Is PSE 12 that much better than Creator? Should I purchase at Costco or at
Adobe? Thanks

If your computer came with Roxio, and it is in your startup list so it runs every time you start your computer, you MAY have problems creating a DVD
Do you know how to analyze what is in your startup, and STOP a program from starting every time you start your computer?
If not, search at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
This is about Encore, but the idea is the same when it comes to PreElements and writing a DVD
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and
then use the FREE http://www.imgburn.com/index.php?act=download to write files or
folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like
his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as
the box label (Memorex is notorious for buying "anything" and putting it inside a
Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your
burner has the best chance to create "good, well formed" laser burn holes... since no
DVD player is required to read a burned disc, having a "good" one from a high quality
blank will help
Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable
Two layer

Double installation (laptop and desktop) team

as team member, does the members have still the opportunity to have a double installation (lap top and desktop) ?

So just to clarify this: like the OP: I use CC on my MacBook Pro and Mac Pro at home. At work, I had been using a 2009 iMac with CS5 installed on it. I just got them to let me buy a brand-new iMac, and I'd like to install CC on that.
So, is my assumption correct that I can install CC on 3 computers, and as long as it's only activated on 2 of them at any given time, it's fine?
Thanks for any info you can give me.

Roxio Creator download for clean install?

I have an A58 and have done a clean install of Windows 7. I'm able to download and install almost everything I need except the Roxio Creator Small Business Edition that came pre-installed.
Does anyone know where it is available for download?
I have found the following link which allows you to download, but it is not supported for the A58 only the A62, and when installing it says not supported in A58 environment
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-72359
Any info greatly appreciated, it's the last thing I need.
Thanks

Hi,
On your machine you should have a directory called C:\SWTOOLS\APPS (before any upgrade).
That should contain the Roxio version for your machine.
Mats
Thinkpad T400s, X61s, X41, 600

IMAC Intel Early 2009 and iphoto

Hope you can help me. I have an early 2009 iMac desktop with these specs
20 inch
OSX 10.9.4
2.66 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3 (I believe I upgraded this to 8 gb)
I have the iphoto program that came with the mac, version 8.1.2
I would like to update to a newer version of iPhoto so that perhaps the photo stream would go to the iMac. Also need to spend some time organizing thousands of photo files so I'd like to be in the latest version.
Problem is that the latest (free?) iphoto has bad reviews. Am I better off not updating at this point? I thought you have to pay for iPhoto? Is the free iPhoto just an app for iPad? I don't see full version. Should I update to a later operating system?
I hesitate to update because older machines don't always work well with new releases. I appreciate any feedback / pros/ cons you can share. Thanks.

Problem is that the latest (free?) iphoto has bad reviews.
The latest iPhoto, 9.6, works fine. Listening to the few bad reviews (out of litterally millions of users) is like judging the health of a city by what you see in one of its hospital's emergency rooms. Remember those having problems are more likely to post than those who are rolling along without a problem.
Your model iMac, Mac9,1, can run Yosemite which is a free upgrade. You'll have no memory problems with what you have. However, since you are currently running iPhoto 8.1.2, iPhoto 9.6 will require a purchase from the App Store.
If you don't want to upgrade to Yosemite and want to upgrade to iPhoto 9 you'll need to purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com. They Yosemite route will be less costly.
What every you do prepare your Mac for any upgrade and always have a backup before embarking on such an upgrade.
By the way, as part of preparing or even in you continue with Mavericks I would download and apply the OS X Mavericks 10.9.5 Update (Combo) updater. Be sure to repair disk permissions before upgrading the system and after.

Web application and desktop application?

Hi everyone,
I am new to this platform.I have a basic doubts that whats the difference between developing application in flex as a web application and desktop application from programming point of view?Can we use same code in both cases?
Please guide me....
Thanks

Hi and welcome,
The main difference between a web application and a desktop application is that web applications do not have access and can't manipulate your local system ( you can't open a window that displays all your local files, you can't delete, rename, edit local files and so on ). Obviously, this is just one difference, there are many more ( the best would be if you google for "web aplication vs desktop application" because the same rules apply for 99% if not all the platforms you can find out there ).
Desktop applications can have full control of your local system ( obviously, we have to take in consideration the platform we are using because since AIR is quite new in the desktop application field it is also more limited than other languages that have been used successfully to create desktop applications for years and year; like ce C# or C++ and so on ).
Another important difference is that desktop applications usually need to be installed in order to function where on the other hand, web applications can run in the browser without you having to install the aplication you are about to view on your computer ( in some cases, like of the Flash and Flex platforms, you only require a "special player" that can display the content you are trying to access... for Flash and Flex applications you need the Flash Player installed for your browser ).
So, before jumping into a project/platform you need to know your target. If you goal is to offer a fast, easy to access and no install required application to your users then you'll usually go with a web application. If your application needs to work with local files, maybe local databases, or it needs more control over the user's PC and so on, then you'll most likely go with a desktop application.
With kind regards,
Barna Biro

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal. I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model)

Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Roxio Creator 2009 And Desktop 4.7

Similar Messages

Maybe you are looking for