Roxio Creator 2009 No Longer Works

I am using Vista 32 bit O/S with all the patches.
When I upgraded to the latest Desktop version (version 96) of the software recently, I found that my Roxio Creator 2009 no longer works.  I can't even open the application up.  When I go to start the Roxio software, I just get a message that "Roxio Creator has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."
Any suggestions for getting my Roxio Creator software to function again?
Solved!
Go to Solution.

What does this have to do with Blackberry?
Before the upgrade, it worked.  After the upgrade, it doesn't work.  That's what it has to do with BlackBerry.
Did this occur after installing DM?
Yes.
Did you install Roxio Media Manager?
Not to my knowledge, although I am not certain.  I tried to avoid installing the Roxio Media Manager.  I just see on my Desktop software:
- Applications
- Organizer
- Media Sync
  - Music
  - Pictures
  - Videos
When I go About BlackBerry Desktop Software and View details on installed components, I don't see anything related to Roxio.
Where do I check to be sure?
If so, that does interfere with other installations of Roxio.  You'll need to uninstall Roxio Media manager and reinstall your othe Roxio software.
Again, I don't believe that I loaded Roxio Media Manager.  I am not sure where to check. 
If required, how do I uninstall Roxio Media Manager from BlackBerry new desktop software?
Additional Comment Below
If you follow this thread, you will see that I deliberately tried to keep my Roxio and BlackBerry software separate:  http://bit.ly/crTlum  (points to BlackBerry forum post)
I would appreciate further advice and assistance.

Similar Messages

  • Roxio Creator 2009 And Desktop 4.7

    I just reinstalled Vista 32 on my pc.  I also just installed Roxio Creator 2009, and I need to reinstall my Blackberry Desktop software.  I see that the latest version is 4.7, and it comes in two flavors: with and without Roxio Media Manager.  
    I suspect that, because I have Roxio's latest version, I don't want the Media Manager from Blackberry Desktop Manager.  If I were to load both, I might create conflicts or other problems.  Am I correct to rely upon Roxio Creator 2009 and load the Desktop 4.7 without Roxio Media Manager?  
    I'd like to keep my pc as clean as possible.  Reinstalling  software is no fun.
    Solved!
    Go to Solution.

    Hello Stecyk,
    You are indeed correct, if you were to install Media Manager with other Roxio software installed, it will cause conflicts and possibly break both apps.
    If you do not want to use Media Manager, you can always enable mass storage mode on your BlackBerry and drag and drop the files via My computer.
    Enable Mass storage mode:
    http://www.blackberry.com/btsc/KB13564
    Roxio Media Creator becomes corrupt when BlackBerry Desktop Software with Roxio Media Manager is installed
    http://www.blackberry.com/btsc/KB14476 
    Hope that helps!
    Cheers 

  • Creative MediaSource 5 and Roxio Creator 2009 Incompatabilit

    Hi,
    I would just like to bring to your attention what appears to be a program incompatability between one of the Roxio 2009 Creator Suite applications and Creai've MediaSource 5.
    When the end-user installs the suite, and updates, and reboots, if the user were then to launch Creative MediaSource 5, it will launch the Windows Installer and begin configuring CinePlayer and ask for the install media.
    This will happen everytime the application is launched.
    If you require any further information for diagnostics purposes, please let me know.
    Andrew.

    I?have both?Roxio Creator Suite 2009 ultimate version ..0 build B0E and Mediasource 5.20.23 on my PC (XP SP3) and do not observe that. Mediasource organiser or player open normally, no windows installer launch. Roxio Cineplayer works normally, as do all other parts of the suite.
    However, I have not (yet) had?any updates to creator 2009 offered, so maybe that update you mention?is what causes the problem in your case. On the Roxio boards, some report getting offered an update, others not. You could check out there, see if anyone has similar problem, or post there.
    http://forums.support.roxio.com/index.php?act=idx
    Message Edited by JRosenfeld on -03-2008 2:04 AMMessage Edited by JRosenfeld on -03-2008 2: AM

  • Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

    Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

    You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
    First you will have to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
    Then you can install PSE from scratch.

  • I dropped my 2009 MacBook Pro and it will no longer work; I need to re-install the OS software to hopefully restore it: what disk(s) do I use?

    I dropped my 2009 MacBook Pro and it will no longer work; I need to re-install the OS software to hopefully restore it: what OS disk(s) do I use?  This may sound like a stupid question but I'm seeking to buy something inexpensive and need to know if a higher version (other than what was initially installed) will work.

    Bekah1996,
    since you didn’t receive its original grey installation DVDs when you purchased it, you’ll need to contact Apple directly to purchase a replacement pair. (The grey installation discs aren’t available in the Apple stores.) Some Mid 2009 models originally came with 10.5.7 (Leopard), and some originally came with 10.6.0 or 10.6.2 (Snow Leopard). If yours had 10.5.7 installed, then you’ll probably receive a 10.5.7 set of grey discs from Apple. If you’d like to upgrade its OS to anything newer, then you’d also need to purchase the white retail Snow Leopard DVD — but you should wait to see what Apple sends you, since if they send you a 10.6.0 or 10.6.2 set, you wouldn’t need to purchase the white Snow Leopard disc.

  • WIndows 7 Ultimate WMP won't play MPG after installing Roxio Creator NXT Pro - Event ID 1000 (100)

    HP dv7t-6100 CTO Quad Edition Win 7 Ultimate SP1 fully updated (sfc, CHKDSK and Malwarebytes scanned - all clean)
    Seems like a simple DLL conflict per the Event Viewer details below:
    Faulting application name: wmplayer.exe, version: 12.0.7601.18150, time stamp: 0x518c6df8
    Faulting module name: dsfOggDemux2.dll, version: 0.80.15035.0, time stamp: 0x4f86e998
    Exception code: 0xc0000005
    Fault offset: 0x000042b7
    Faulting process id: 0x1394
    Faulting application start time: 0x01cf17b19b615a49
    Faulting application path: C:\Program Files (x86)\Windows Media Player\wmplayer.exe
    Faulting module path: C:\Program Files (x86)\Common Files\Roxio Shared\OGG_Flac Codecs\dsfOggDemux2.dll
    Report Id: de83bdca-83a4-11e3-b32d-2c27d7a9fbb9
    I uninstalled Roxio Creator NXT Pro (& used their cleanup program and CCleaner only on Roxio remnants) and the problem disappeared.  Did a complete re-install of Roxio and the same problem came back.  Curious as to why WMP would link to a Roxio
    DLL anyway.  BTW: Windows Media Center plays the same MPG files (w Roxiol) just fine so maybe not worth the $$$ below.  Had no problem with WMP &  Roxio Creator 2011 but the USB video capture device failed so I had to upgrade.
    Per incident: Roxio wants $25 / MS wants $49.  Thought I'd try "free" here first, not sure who owns this problem.
    (I guess the ~$49 Roxio Easy VHS to DVD Converter package has NO SUPPORT and 65% ONE STAR Amazon reviews - support only for their "Premium Products")   Maybe if they sold stuff that worked none of them would
    need "support"!
    TIA,
    JCN

    (a)  My account is an administrator account.
    (b) I did try turning WMP and WMC on and off independently within and without Roxio installed.  Without Roxio WMP works fine.  WMC works either way.
    (c) I did several more uninstalls / re-installs of Roxio product including using Revo Unistaller and Roxio's c2011_systemclean.bat "clean-up uninstall tool").  None of which worked and even made it worse (see below).
    My original key question still is:  Why does WMP fault via a Roxio dll?  dsfOggDemux2.dll (codec).  How is this even possible for there to be such a linkage?
    After all this effort now a clean reinstall of Roxio NXT Pro leaves me with this -->
    RoxioCentrtalFx.exe (their master gatewte interface) will not start-up with this new error (and un-fixable):
    Faulting application name: RoxioCentralFx.exe, version: 5.0.0.0, time stamp: 0x50077c71
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
    Exception code: 0xe0434352
    Fault offset: 0x0000c41f
    Faulting process id: 0x1a40
    Faulting application start time: 0x01cf1846d5b6b1cb
    Faulting application path: C:\Program Files (x86)\Roxio Creator NXT\Roxio Central\RoxioCentralFx.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: 18f55045-843a-11e3-981e-2c27d7a9fbb9
    Although the two Roxio programs I use will start via shortcuts:  mediacapture14.exe &
    mediamanager14.exe
    When the later program occasionally stops working, the application error, is via ntdll.dll which I noticed was updated in a series of Windows updates (about 12-14 of them) around the 8/27/2013 timeframe.  I kind of don't believe in co-incidences.
    My one and only Roxio Forum responder kind of suggested "why you and nobody else?" (having these problems, i.e., I am the crazy nut job here) to which I referred him to the hundreds of reviews on Amazon, etc that gave Roxio 2012 products, etc ONE STAR or
    less (about 50% out of >300).  I NEVER had this much trouble with Roxio 2009-2011.  Must be that new Corel culture ownership sinking in.

  • The DVD function of 2007 MacBook Pro (10.7.5) no longer works. Apple does repair, but referred to buy an external DVD player.  Purchased two, including the Apple, neither work on my model. Trying to burn DVD of 8MM video.  Any suggestions?

    I am trying to turn my Sony 8mm Handicam video into DVD through my MACBOOK PRO.  Unfortunately my DVD function no longer works.  Apple won't repair, no longer carries the parts.  Referred to Apple repair shop.  Gentleman there said it cost the same to purchase an external DVD player as repair the MACBOOK.  So far, I have purchased two, including Apple's.  Neither works with my MACBOOK.  Any ideas or suggestions?

    Hi rgneil:
    Yeah, keeping an older machine running has it's challenges.
    Have you tried one of the DVD burners from Other World Computing?  Their sales support can probably guide you to one that should work.  The OWC burner that I use with my 2009 17-inch MacBook Pro has FireWire and USB2 connectors.
    Are you using iMovie/iDVD or Final Cut Pro/DVD Studio Pro?  And, do you have Roxio Toast?
    If all else fails, you could try a stand alone DVD-Recorder.  You'd want to pick a model that supports external video input.  I have a LiteON DVD-Recorder that I patch VHS, Regular8 and Hi8 decks to now and again just to get stuff off tape to DVD-R.
    Report back on what works (or continues to not work) for you.
    Burn on!
    -Warren

  • Getting sound into roxio creator 9

    last year I purchased an HP with windows 7. There are some radio programs I record from the internet with creator 9  but since windows 7 and realtek HD I can't get any audio from the soundcard to use the record feature. My older computer with windows xp and the same roxio program worked great. What's my problem?

    EMC 9 was not designed for Windows 7 nor was Creator 2009.    Creator 2010 is the current application made for Windows 7. I have all three versions.
    If you are using Sound Editor then when you click on record audio you should see another window or drop down tab to select the audio source.
    Go over to the Roxio support BB and post the question under the Legacy Applications EMC 9 and see what you get for an answer.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • System password no longer works after 10.9.4 update

    YOU CAN READ MORE ABOUT IT HERE:
    Re: Issues after Software  OS X 10.9.4 (13E28) upgradeRe: Issues after Software OS X 10.9.4 (13E28) upgrade
    Same problem, here, updated, pw n longer works, HOW TO  FIX? Can’t install anything, any ideas?
    HERE IS MY ENTRSFO, HOPE IT HELPS:
    EtreCheck version: 1.9.12 (48)
    Report generated July 18, 2014 at 11:49:39 AM PDT
    Hardware Information:
      27" iMac (Early 2011)
      iMac - model: iMac12,2
      1 2.7 GHz Intel Core i5 CPU: 4 cores
      16 GB RAM
    Video Information:
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 1920 x 1080
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27
    Disk Information:
      ST31000528AS disk2 : (1 TB)
      EFI (disk2s1) <not mounted>: 209.7 MB
      Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)
      Recovery HD (disk2s3) <not mounted>: 650 MB
      OPTIARC DVD RW AD-5690H
      HGST HUS724020ALE640 disk0 : (2 TB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      disk0s2 (disk0s2) <not mounted>: 2 TB
      Boot OS X (disk0s3) <not mounted>: 134.2 MB
      HGST HUS724020ALE640 disk1 : (2 TB)
      EFI (disk1s1) <not mounted>: 209.7 MB
      disk1s2 (disk1s2) <not mounted>: 2 TB
      Boot OS X (disk1s3) <not mounted>: 134.2 MB
    USB Information:
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
    FireWire Information:
      LaCie d2 quadra (button) 400mbit - 800mbit max
      EFI (disk4s1) <not mounted>: 209.7 MB
      Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)
      Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)
      OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)
      Recovery HD (disk4s5) <not mounted>: 650 MB
      MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)
      Avid Mbox Pro 400mbit - 400mbit max
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
      G-Technology G-RAID with Thunderbolt
    Configuration files:
      /etc/hosts - Count: 18
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
      [loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support
      [loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support
      [loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support
      [not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
      [not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support
      [not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
      [not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
      [not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
      [loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
      [not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
      [not loaded] com.roxio.TDIXController (1.7) Support
      [not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
      [loaded] com.waves.driver.soundgrid (2.0.0) Support
    Startup Items:
      DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    Problem System Launch Daemons:
      [failed] com.apple.wdhelper.plist
    Launch Daemons:
      [running] at.obdev.littlesnitchd.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.line6.l6ksettingmgr.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.paceap.eden.licensed.plist Support
      [loaded] com.timesoftware.timemachineeditor.helper.plist Support
      [running] com.waves.daemon.SoundGridProtocolService.plist Support
      [loaded] PACESupport.plist Support
    Launch Agents:
      [running] at.obdev.LittleSnitchUIAgent.plist Support
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.avid.mboxpro.helper.plist Support
      [running] com.canon.MFManager.plist Support
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.wacom.pentablet.plist Support
    User Launch Agents:
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
      [failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
    User Login Items:
      iTunesHelper
      SpeechSynthesisServer
      uTorrent
      G-Technology Assistant
    Internet Plug-ins:
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
      EPPEX Plugin: Version: 10.0 Support
      iLokClientHelper: Version: 3.6 - SDK 10.5 Support
      DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support
      MagellanPlugIn: Version: 1.2 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
      GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      JavaAppletPlugin: Version: Java 7 Update 60 Check version
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
    Safari Extensions:
      Conduit Search for Safari: Version: 1.0
      Searchme: Version: 1.3
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
      ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
      UploadManager: Version: (null) - SDK 10.5 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      ContentManager: Version: (null) - SDK 10.5 Support
      RocketEngine: Version: (null) - SDK 10.5 Support
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      Line6AudioMIDI  Support
      Mbox Pro  Support
      YAMAHA-USBMIDIPatch  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB
      Destinations:
      TIME MACHINE [Local] (Last used)
      Total size: 1
      Total number of backups: 3
      Oldest backup: 2013-10-21 19:02:42 +0000
      Last backup: 2014-03-19 11:19:09 +0000
      Size of backup disk: Too small
      Backup size 1  < (Disk used 875.71 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          2% SGProtocolService
          1% DashboardClient
          1% WindowServer
          1% fontd
          0% Safari
    Top Processes by Memory:
      999 MB com.apple.SpeechRecognitionCore.speechrecognitiond
      459 MB DaisyDisk
      360 MB mds_stores
      180 MB Safari
      164 MB Mail
    Virtual Memory Information:
      8.79 GB Free RAM
      4.12 GB Active RAM
      1.46 GB Inactive RAM
      1.62 GB Wired RAM
      1.76 GB Page-ins
      9 MB Page-outs
    Like Show 0 Likes(0)

    Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
    NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
    Your or anyones HELP! is greatly appreciated!

  • Roxio Creator 2010 not installing on Windows 7

    I recently installed Window 7 Home Premium via a clean install.  Have been reinstalling programs as time permits.  Had to upgrade to Roxio Creator 2010 as my older version would not work.  First attempt at install gave an error stating that the installation had been interrupted.  As I recall, it was when the installation routine was trying to install DirectX 9.  This doesn't make sense since my computer shows DirectX 12 as being installed.  The installation ended.
    Subsequent tries at the installation have resulted in stoppages with the message "Setup has determined that your configuration does not support any of the included products".
    I have been going back and forth with Roxio tech support without success.  Thought that I would try here.
    They have told me to uninstall Microsoft.NET Framework 3.5.1, then update both DirectX and Microsoft.NET Framework.
    Microsoft.NET Framework (any version) does NOT appear in the "Uninstall or change programs" listing.  It does, however, appear in the "Turn Windows features on or off" listing.  It was first found to be turned off.  I subsequently turned on all of its features.  I understand that .NET is 'built-in' to W7.  Is that why it doesn't appear in the "Uninstall...." list or do I have a problem there?
    I downloaded dotnetfx35.exe and dotNetFx35setup.exe from the MS site.  The User Account Control box appears when either is selected.  When the "Yes" box is selected, each program appears to terminate without further action.  Does this mean that the installation was previously completed?
    When I tried the DirectX update, I got a message that I was at the latest level.
    Roxio's "Clean Install" routine, their knowledgebase article 000207CR, was performed at least four times under different circumstances without success.

    I had the same problem with the install at the point where the Roxio 2010 installer gets stuck on installing Microsoft.Net v3,5 SP1.  I went back and forth with Roxio tech support and Microsoft for two weeks.  Thanks to my IT background, I finally got Roxio Creator 2010 installed.
    Here is the fix:
    1.   Go to http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en and download "dotNetFx35setup.exe". Save it to your desktop.
    2.   Go to "Turn Windows Features on  or off" Deselect Microsoft.net 3.5 SP1.
    3.   Then right click on the Roxio Digital downloaded file and choose the Compatibility mode tab.
    4.   Change the Compatibility mode to "Windows Vista (Service Pack 2)".
    5.   Use an unpacking program such as "WinRar" to Unpack the Digital download to a specific location.
    6.   After unpacking, go to unpacked folder location "RoxioCreator2010".
    7.   Then open the folder "DOTNETFX_351" and go to folder "wcu" and open the folder, go to folder "dotNetFramework" and open the folder.
    8.   Replace the file "dotNetFx35setup.exe" you downloaded with the file in this folder.
    9.   Then right click on the file "dotNetFx35setup" and change the compatibility mode to "Windows Vista (Service Pack 2)".
    10. Now run the Roxio Installer.  The installer will take at least 15 minutes or more to finish.
    Good Luck!

  • USB device no longer works after 10.6.5 patch

    After installing the patch for 10.6.5 Thursday, my Belkin N52te no longer works. It has previously worked fine, and the system extension for it was able to see it, but now it says "No device connected". I have tried re-installing the driver, and 75% through the installation I get a message that the xxx.kext file was not installed correctly. I get this each time I attempt to re-install it.
    This gamepad has worked flawlessly for me since purchase in spring of '09 prior to this.
    Please don't tell me to update the driver, as Belkin's "latest" is Feb 09. I have contacted Belkin, and am waiting for a response.
    I found a suggestion of finding the old usb.kext file from the system backup I have on a second drive, and replacing the current one with it. If anyone thinks this will work, could they give me the exact name of the file to look for?
    It seems odd that Apple, after trying to get the Mac accepted as a viable gaming machine, should put out a patch that breaks one of the most widely used "speedpads" on the market. I have been an avid World of Warcraft player for close to 6 years now. The enjoyment I receive while playing WoW has been the driving reason for me to purchase 2 top of the line Mac Pro's in the past 4 years. Come on Apple, fix this, please!?
    Thanks,
    Dan K.

    February 2009? Snow Leopard wasn't even out yet. It is lucky it has worked for a year and a half.
    Come on Apple, fix this, please!?
    This is a user to user board. Check the terms of use, if you don't believe me. If you want Apple to fix something, here are the links:
    http://www.apple.com/feedback/
    http://bugreporter.apple.com/
    I found a suggestion of finding the old usb.kext file from the system backup I have on a second drive, and replacing the current one with it. If anyone thinks this will work, could they give me the exact name of the file to look for?
    While this may work, that's a jalopy of a solution. It might break in the next update, not being up to date itself, and some other extension might be dependent on it. Best to downgrade until you can get assurance that it will work with 10.6.5, if this is an important feature for you. You can either recover your backup, or if not available, see this tip:
    http://discussions.apple.com/thread.jspa?threadID=1308817&tstart=10

  • VueScan no longer works with Yosemite

    I have a MacBook Pro (15 Inch, Mid 2009) Processor,3.06 GMz Intel Core 2 Duo GMz Memory 8GB 2067 MHz DDR 3. After loading Yosemite (OS 10.10), VueScan no longer works. VueScan can't recognize my scanner.
    Any ideas.

    Did you download and install the latest driver (v12.34.0) for the HP4500 from HP?
    HP-ENVY-4500-series_v12.34.0.dmg
    More from HP info here:-
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-125217- 5&cc=us&dlc=en&lc=en&os=4182&product=5304877&sw_lang=

  • Pasting from a web page into a File-Save dialog no longer works; causes a freeze-up

    When I place an order on Amazon, I copy the order number, then print the invoice to .pdf. When the file save dialog comes up, I paste in the order number as part of the file name. I used to, that is. At some point the pasting part no longer worked: nothing (visible anyway) is pasted, but something is happening, as the file save process hangs, and I have to use task manager to kill it. Then, the print process is trashed - if you try to print again, you get an error - and I have to restart Firefox to clear that.
    This copy/paste procedure works fine in IE & Chrome.

    The only way I was able to reproduce what you described is to run the script after copying a picture.
    Here is a refined version.
    It make two attempts to grab text items from the clipboard.
    If both failed, it send an error message.
    --[SCRIPT table2text]
    Enregistrer le script en tant qu'Application ou Progiciel : table2text.app
    déplacer l'application créée dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:
    Il vous faudra peut-être créer le dossier Applications.
    Copiez vos données dans le Presse-papiers.
    menu Scripts > table2text
    Le presse-papiers sera alimenté par le composant Text ou utf8 du contenu initial.
    +++++++
    Save the script as an Application or an Application Bundle: table2text.app
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:
    Maybe you would have to create the folder Applications by yourself.
    Copy your block of datas to the Clipboard.
    menu Scripts > table2text
    The Clipboard will be filled with the text or the utf8 component of its original contents.
    Yvan KOENIG (Vallauris, FRANCE)
    4 février 2009
    --=====
    on run
    try
    set the clipboard to (the clipboard as text)
    on error
    try
    set the clipboard to (the clipboard as «class utf8»)
    on error
    if my parleFrancais() then
    error "Pas de données texte dans le presse-papiers !"
    else
    error "No valid text data in the Clipboard !"
    end if
    end try
    end try
    end run
    --=====
    on parleFrancais()
    local z
    try
    tell application theApp to set z to localized string "Cancel"
    on error
    set z to "Cancel"
    end try
    return (z = "Annuler")
    end parleFrancais
    --=====
    --[/SCRIPT]
    Yvan KOENIG (from FRANCE mercredi 4 février 2009 21:49:14)

  • Sharing photos to iCloud with Aper 3.6 no longer works

    Hello:
    It appears that the option to share photos to iCloud from within Aperture no longer works (option is there but is greyed out).  I think this occurred sometime during the recent update cycles to Yosemite and IOS but I haven't used it for some time so I'm not sure.  All I'm doing is selecting my photo and hitting share->iCloud which has worked well in the past.  I can see a fair amount of chatter about this and/or similar issues but I haven't been able to discern if anyone has come up with a solution.
    Any help / comments appreciated
    Dave
    Using Yosemite and Aper 3.6 on a late 2009 27 iMac (need a new one....soon)

    I believe I may have misspoke, was thinking about something else.
    You've probably been thinking of iCloud Photo Library (Beta) , see:  iCloud Photo Library beta FAQ - Apple Support . That is a real killer .
    iTunes Photo Sync will no longer upload photos to iOS 8 devices - iTunes will just show a prompt, that photos can now be uploaded using iCloud.
    My Photo Steam will no longer upload to iOS devices from the Macs. That is, what many users have reported, but I do not know any Apple Support document that confirms it.
    On iOS 8 devices is the Camera Roll no longer  visible.
    The only ways I know to upload from the Mac to iOS devices with iCloud Photo Library (Beta) active, is Mail, Dropbox, or https://www.icloud.com/#photos.

Maybe you are looking for