RPC server unavailable coming when running repadmin/replsummary command

Hi,
I have five windows server 2012 domain controller. In this 3 servers in one site and other two are in different sites.
Replication between the sites its seems working fine.
I ran the report for checking AD health.
Repadmin /showrepl ===> Its coming successful.
But when iam running this below command..
repadmin /replsummary ====> RPC server unavailable coming for server located in other site.
Again i ran DCDIAG command(DCDIAG /TEST:DNS /V /E /F:<e:\dns.log> ).Its coming like this...
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: test.int
Test1.test.int PASS FAIL n/a n/a n/a n/a n/a
Test2.test.int
PASS PASS PASS PASS WARN PASS n/a
Test3.test.int PASS PASS PASS PASS WARN PASS n/a
Test4.test.int PASS PASS PASS PASS WARN WARN n/a
Test5.test.int PASS FAIL n/a n/a n/a n/a n/a

Hi,
From your DCDiag result, the dcdiag \dnsbasic test failed.
To get more detailed error information, we can run dcdiag \dnsbasic command on Test1 and Test5.
Are test4 and test5 in the same site?
For more detailed information about this result, we can refer to the following link:
Dcdiag for DNS: Test details explained
http://social.technet.microsoft.com/wiki/contents/articles/17741.dcdiag-for-dns-test-details-explained.aspx
Best Regards,
Erin

Similar Messages

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

RPC server unavailable

Hello All:
    I know there are several post out there for this problem and I know there are fixes out there. But out situation is a little different I suppose. And we already tried the solution posted on note 833798, 824976 and several post previously and still unable to resolve this..
    There are two building in the company that needs access SBO. And this problem only happens in 1 build which server does not reside.
    SBO start just fine, it runs and everything looks ok. A add-on that use single sign on with getcompany() call starts and system crash. Not responding. When you force the application to close. A error message pop up saying RPC server unavailable.
    This same thing happens when we trying to run any DI-API add-on such as DTW...
    And everyhting works just fine on the other building. There is no fire wall between. There is a T1 line between the two building. From the network capture there is some kind of RDS package wrong format error messsage that coming back and forth.
    If anyone have see something similar, I really appreciate any suggestion at this point!!

They are all in 1 domain. Furthermore we used Domain Admin which has full rights for all system under domain. So it shouldn't be a user problem.
There is a bridging system in between the T1. But if we run the VPN then it should by pass the bridging system and directly access server.
SBO server /SQL DB / licenser server are all in 1 box which is a WS2003 SP1 64bits... I don't know if that information helps any!!
Again the people in the first building doesn't seem to have this problem at all.

800706BA RPC server unavailable in Report Generation toolkit

Hi all,
I've got a problem with LabVIEW 7.1.1 and Report Generation Toolkit (RGTK).RGTK is used to connect to MS-Word, create a new document from template and report test results. Works like a charme when stying local on the respective test machine.
LabVIEWs 'Automation Open' node as wella as other parts of the RGTK have an control 'machine name' so I suspected I could bring a report server into game. Tried it and get an error "0x800706BA - The RPC server is unavailable in myTestVI" (translated from German Windows error).
All the required subVIs to create a document have been put into a small test app. This one runs fine when running on the desired report server, but fail when opened and run on the devellopment machine.
I have searched extensively for that error code and have changed some port settings in the firewalls and some services settings with no success. Can anyone help me out?
BTW, on the remote machine a new process named WINWORD is started, but nothing more.
TIA!

Hi Lul,
The error 0x800706BA is, as you said, a windows error (and, btw, your translation was correct as the original title is "The RPC server is unavailable").
You can try to fix it with MicrosoftFixit :
http://go.microsoft.com/?linkid=9666880
Beside, more links that could be of some use :
Windows Update error 800706BA:
http://windows.microsoft.com/en-US/windows7/Windows-Update-error-800706BA
Microsoft answer about error 800706BA:
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/microsoft-updates-fail...
In addition, a KB which is also related to this "RPC Server unavailable" in our IT database:
How to fix MSI software update registration corruption issues:
http://support.microsoft.com/kb/971187
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

RPC Server unavailable -2147023174 ActiveX

Good Afternoon,
I am trying to control a Siqura IP Camera trough an ActiveX Control dll, when I Run the VI I get the following error on the call of the Second Automation Open.VI: RPC Server unavailable -2147023174.
I have tried to investigate why should I receive this error but for now have no clue.
Could anyone tell me why it is showing this error, you'll find enclosed a pic of my VI and a copy of the ActiveX dll I use (renamed txt because Ni would not allow posting .dll files.
Thanks in advance,
Attachments:
RPC Server Unavailable.JPG ‏90 KB
Siqura.Controls.txt ‏860 KB

The file I use is attached, however I believe I have determined one small issue. If I compile the attached vi. and move it to the server it will call the application locally. In other words, the app will be called on the local server when the code attached is compiled. I have configured the default security per a couple of posts on this topic, and have modified the DCOM settings for the interactive user. The same code attached does work for another server on the same network that runs Windows NT 4.0. The other machine ( the one I cannot call Name.exe from remotely) has windows server 2003 enterprise edition. I believe the code is simple and pretty much correct, however I seem to be having some problems with the Win server 2003 enterprise security. Please evrify that this code should work (open an exe called Name.exe, and return the value of a control "IP Dot". Have you seen any issues with Windows XP or Server 2003 Enterprise, that may cause DCOM communication issues with the sample code I have provided?
Attachments:
ontheroad.vi ‏53 KB

Method PrintToPrinter sometimes throws 'The RPC server Unavailable'

I am using ReportDocument.PrintToPrinter method in order to print a report in my asp.net 2.0 application
Some times this method throws exception 'The RPC server Unavailable'
but sometimes it works fine and prints the report to printer
Is there any setting on web server or print server I am missing?

I am using
Crystal Reports 2008 Runtime SP2
Version     12.2.2.453
I am printing on Network Printer
and OS is Windows XP Professional
Following is the piece of code I am running to print a report, sometimes rd.PrintToPrinter(Convert.ToInt32(sCopies), true, 1, 1); works prefectly fine but some times it throws RPC Server Unavailable )
try
     using (ReportDocument rd = new ReportDocument())
           rd.Load(sSourceFilePath);// rpt file
            rd.PrintOptions.PrinterName = vssDefaultPrinter; //\\PrintServ\LexE250dn
            rd.PrintToPrinter(Convert.ToInt32(sCopies), true, 1, 1);
   catch (Exception)
        throw;
Edited by: SainiAmritPal on Jan 5, 2010 6:40 PM

Hyper-v manager in windows 8.1 cannot connect to hyper-v server. RPC server unavailable

I am setting up a new server. I installed Hyper-V 2012 R2 on it and want to manage it remotely with Hyper-V manager from a Windows 8.1 computer. I am unable to communicate with the computer with the server. Hyper-V manager gives me the following error: RPC
Server Unavailable. Unable to establish communication between "the hypervserver" and "the W8.1station". Both computer are located in the same subnet and both are on the same domain.
I configured the server with a fixed IP, DNS, to accept pings, connected it to the domain and set it up to allow remote access and management. Although I do not think it is necessary, I added my domain account to the administrators group in the hyper-V server.
I can perfectly ping the server and remote into the server from the W8.1 station. From he server I can also ping the W8.1 station as well as exterior websites (DNS functionality is ok).
I have play with the firewall in both, the Hyper-V server and the management station and have not being able to get them to communicate. Blaming the Hyper-V server for all this and the great time that I have already spent on this problem, I borrowed a Windos
7 Pro computer, installed RSAT and enabled the Hyper-V manager in that computer. Launched the manager AND CONNECTED TO THE HYPER-V SERVER WITH NO PROBLEMS AT ALL !!!!!!!
I have read a lot already about this but most people having this issue are setting up servers in a workgroup environment, and almost nobody is using Windows 8.1 as the management station. Can someone PLEASE give me a hand with this problem??
Thanks to you all !!!

Hi reirem,
Please use the script " hvremote " to Verify configuration for errors via command "hvremote /show /target:othercomputername
Here is HvRemote script link :
http://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Getting "server unavailable error" when connecting to HFM via a Mobi dial

Since this morning I have been getting this error when I try to login to Hyperion: "The RPC server is unavailable"
Strangely, I can access the network drive and even pull Hyperion information through the excel add-in but cannot login through the 32bit client.
I am using Mobidial to access the system. Do you have any idea what the problem could be?

I run into similar problem. Pls let me know if anybody know the solution. Thank You !

Fail to add domain user into local group - RPC server unavailable

Hi all,
I have a server-1 which is join to domain A. I need to add a domain user from domain B to my server-1 local group. I keep getting "The RPC server is unavailable" error message.
But i try to use another server-2 which also belong to domain A and same network segment as server-1, i do not encounter this error while adding domain B user onto it.
The problematic server-1 is a Windows 2008 R2 SP1 server. It is install with IIS and MS SQL database 2008.
Just one thing i am guessing whether is it the cause of the problem. Before server-1 join to domain A, i did not disable windows firewall. I disable it only recently. Could this has cause the problem on my server-1?

Let's recap to make sure I understand exactly what you have going on:
- Server 1 and Server 2 are both on Domain A and in the same site, behind the same firewalls
- Adding a user from Domain B works on Server 1 but not Server 2.
- You get an RPC error while adding Domain B's user on Server 2.
Is Domain B on the other end of some firewall?
- Can you do a portqry to a DC in Domain B from Server 2 (http://www.microsoft.com/en-us/download/details.aspx?id=17148)
- Run this command: portqry -n <DomainBFQDN> -p both -o 53,135,389,3268
- We are testing DNS, RPC, LDAP and GC. Do you see anything come back as filtered or not listening?
- Do the same thing from Server 1 and compare the results.
This sounds like a connectivity problem.
Chris Ream

I keep getting a "server unavailable " MSG when trying to set up yahoo mail. any ideas?

I'I'm trying to set up yahoo mail oan my iPod touch. I get the MSG. Server unavailable, try later. Any ideas how to set this up?

Have you looked at this previous discussion that is marked as correctly solved:
Keep getting "server unavailable" when setting up yahoo mail. Other mail sets up with no problem. Just yahoo with issues

Rpc server unavailable message during installation

I ordered a new cd from hp for my c3180 series all in one printer and during install it gives me a mesage that the RPC server is unavailable.How do I fix this? Now also my other little printer is not recognized as well...

Hello all.
I'm trying to install BPC 7 sp5 in a two server environment, but the installation stops with the error message "Cannot connect to . Please check report server name".
Environment:
Appserver: Win2003 R2 32 bit.
Sql server: Win2008 64 bit, Sql 2008 Server 64 bit.
Default installation of Report Server was used. So virtual directory is ReportServer. I can successfully connect to Report server from IE (http://ReportServerName/ReportServer). The installation user is a domain user and is member of the Administrators group on both servers. Ports 1433, 2383 and 80 are open.
So then I wonder if the error comes from the fact that we're using Windows 2008 as OS on sql server. Is it possible to use Win2008 on sql server?
Kind regards
Arild Bjørsvik.

HT4623 i keep getting the message activation server unavailable and when i try with i tunes it says no simm

i cannot activate my iphone im getting message server unavailable... when i try to activate with i tunes it says there is no sim

This is how I fixed it on my new iPhone 5S. Using the standard yahoo setting on my phone.
You will have to access "managing your app passwords" on your account profile for yahoo. Generate password for your app. For example: "My iPhone 5S'
Go to your Iphone and set up your yahoo mail account on your phone the normal way and you have to use the generated password. instead of the yahoo account password.
source:
http://virtualizeme.net/iphone-5-yahoo-mail-server-unavailable-fix/
I hope this helps,
cheers

RPC Server unavailable (without errer code)

I have installed Zebra Card Printer P330i and a HP Scanjet G4050 over USB cables connected onto the same Windows 7 PC. Individually, both appliances work separately fine but if Scanjet G4050 is installed either before or after the Zebra Card Printer, Card
Printer it becomes inoperable. Zebra Card Printer seems not to work at all and crashes finally with (RPC Server is not available). I have tried "net stop Spooler; sc config Spooler depend= RPCSS; net start Spooler" and many others but to no avail.
Is someone out there who has similar experience and got a solution for it? Would be extremely thankful.

Hi,
I suggest you check the printer's and scanner's properties under Control Panel\Hardware and Sound\Devices and Printers and see whether they use the same port settings.
If so, change the printer's port by following the user manual.
If it doesn't work, please post back the event log related to this issue and also use Process monitor to capture the system actions after you install them all and during you open the printer to repro the issue.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to use, please refer to this article:
Using Process Monitor to capture system events
http://www.sophos.com/en-us/support/knowledgebase/119038.aspx
Check the logs and see if there is any access denied error, if so, follow this article to solve it and check the issue again:
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
Kate Li
TechNet Community Support

Invalid group section error when running report containing command.

The error is the following (displayed in Dutch, spent some time changing the language settings, but still CR persists in showing the message in my mother tongue, but the gist of it is: invalid group section or something like that) Process error: Ultimo.Services.ReportService.Core.ReportingException: Error creating export file: LtapList02-01.rpt ---> CrystalDecisions.CrystalReports.Engine.InvalidArgumentException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. ---> System.Runtime.InteropServices.COMException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options) etc. The command is phrased thus: select * from {?DatabaseSchemaPrefix}applfn_LtapStructure(). The error is somehow associated with the parameter used in this command. If I remove it and replace it by the value used when running the report, the report runs successfully. Also, strangely, when I define a default value for the parameter in the command and programmatically add a value for it by the method call parameterFieldDefinition.CurrentValues.AddValue(), also the report will run flawlessly. Without the default value it will fail. But when I want to run the command without a value for the parameter (parameterFieldDefinition.CurrentValues.AddValue("")), so for it to be empty, while a default value is defined for it too, also, running the report will result in an error. My question is: has anyone ever seen this type of thing happening? And is there a solution?

Hi
Is it a Date Parameter., ! if so, look for format it is taking. because u said report runs well when default value is assigned. Hope, most probably the problem will be related to data format.
and
try to provide details regarding CR version and all., will be helpful to others to help you.

RPC server unavailable error message when trying to load printer software (hpd1300inkjet), winxp

When I try to load the sofware this is the error.
I would imagine this would occur w/any printer--so its not specific to the inkjet that I have.

Check that the Remote Procedure Call (RPC) service is running:
Control Panel - Administrative Tools - Services
Find Remote Procedure Call (RPC)
Right click on the service, then select Properties
Check the Service status: it should read Started
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

RPC server unavailable coming when running repadmin/replsummary command

Similar Messages

Maybe you are looking for