RPLDAP_EXTRACT - Error when updating the LDAP directory

I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AM

Hi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp

Similar Messages

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when Updating the posted AR Document

Hi all
When i try to update the due date in the Posted AR Document it gives me an error stating that "This entry already exists in ADO1 Table(ODBC)"...
But i can update the same in the super user login... I thought it was an authorization problem... But the user updated few documents... for the rest he gets this error...
Marikannan

Hello Marikannan,
Please run the checking query:
Select T0.docentry, T0.objtype, T1.docentry
from ADO1 T0 Left join ADOC T1 on
T0.Docentry = T1.docentry and T0.objtype = T1.objtype and
T0.loginstanc = T1.loginstanc
where T1.docentry is null
If there is any result from this query, I think you should create a support ticke and send it
to the SAP Support Center.
Regards
Helen

Error when updating the Request again after deleting it .

Hi
Actually I deleted few requests(some red ,some green) to load the request in order in the ODS for each date. While again updating the same requests from the PSA,
I am getting this error in the monitor.
"Deletion of M version from ODS terminated"
What should i look for ?
Please advise,
Thanks and regards,
Priya.
Few lines from the monitor:#
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
Deletion (messages): Errors occurred
Delete running: ODS ZCCD0003 , from 71504 to 71938
Deletion of request 71938 from ODS ZCCD0003 successful
Deletion of request 71938 from ODS ZCCD0003 successful
Deletion of request 71938 from ODS ZCCD0003 successful
You want to delete request 0000057118 , but it is already updated
Deletion of request 71938 from ODS ZCCD0003 successful
Deletion of request 71876 from ODS ZCCD0003 successful
Deletion of request 71504 from ODS ZCCD0003 successful
Deletion of M version from ODS ZCCD0003 completed successfully
Delete running: ODS ZCCD0003 , from 71504 to 71876
You want to delete request 0000057118 , but it is already updated
No data request exists for request number 71876
No data request exists for request number 71504
No data request exists for request number 71,504
<b><i>Deletion of M version from ODS terminated</i></b>
Deletion of M version from ODS ZCCD0003 completed successfully
Delete running: ODS ZCCD0003 , from 71504 to 71876
You want to delete request 0000057118 , but it is already updated
No data request exists for request number 71876
No data request exists for request number 71504
No data request exists for request number 71,504
Deletion of M version from ODS terminated
Deletion of M version from ODS ZCCD0003 completed successfully
Delete running: ODS ZCCD0003 , from 71504 to 71876
Deletion of request 71876 from ODS ZCCD0003 successful
Deletion of request 71504 from ODS ZCCD0003 successful
Error :Deletion of M version from ODS terminated

Hi Roberto,
I just want to know in SM50 how do we recognise that the process is running for what request.
Everytime I see only this status:
0 DIA 2004 Running Yes SAPLTHFB 400 Disdgnl01.
What does this report do? and how do we understand the
details ......
Can i have some link as well where I can get more information about the process overview.
Thanks a lot for all your help,
Priya.

E71 says "Update error" when updating the Mobile V...

Hi to everybody.
I must say mobile VPN client (IPsec) is a pain in the ***. It's incredible how problematic is this software. I'm trying to connect to my VPN server (Linux-based) using Openswan, and after trying for some months, I cannot connect it.
I decided to update the client, and I tried to install the last version (mVPN 3.1 build 090519). But, no matter what version I use, the answer is the same:
UPDATE ERROR
Please, help me with that. And if you know where can I addres the IPSec Openswan issues with this client, please, tell me... I don't have a clue in how to put this f***** client to work!!!

Hello Marikannan,
Please run the checking query:
Select T0.docentry, T0.objtype, T1.docentry
from ADO1 T0 Left join ADOC T1 on
T0.Docentry = T1.docentry and T0.objtype = T1.objtype and
T0.loginstanc = T1.loginstanc
where T1.docentry is null
If there is any result from this query, I think you should create a support ticke and send it
to the SAP Support Center.
Regards
Helen

Iphone 5s error when updating the latest version of ios.

I'Ve updated to the 8.0 version and some apps did not open. Now I've updated the 8.0.2 version and the minute i accepted terms and conditions the screen went black with the apple. Till then it was ok for me. But then it started flahing to a blue screen. Its not respondindg to the update correctly. Since then its been like four hours and its still the same.

Hi virgiinita,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot up after updating the iOS version. First, I'd like you to please try and reset the device. If the issue persists, then you will need to put the device into recovery mode, and restore it to its factory settings.
Turn your iOS device off and on (restart) and reset
If you can't update or restore your iPhone, iPad, or iPod touch
Take care,
Alex H.

Error when updating the firmware

I get this error after trying to install the new firmware ????????
this after the process of closing the tablet........
Tablet Xperia Z on stock 4.4.4
Galaxy S2 on 4.4.4
Solved!
Go to Solution.

PC Companion installed on my Win 7 machine detected the Xperia Z Tablet (312) asked if I wanted to update and started through the process.
I have tried it a number of different ways and always with the same result.
The update gets downloaded, the process starts and PC Companion says basically... "Your tablet will be shut down during the update, don't touch it!"
The tablet shuts off, I hear the USB disconnect tone on my PC. PC Companion continues for about 30 seconds and then displays this message.
"There is no software available for your phone"
It's sort of amusing that the same software that just informed me of an update and downloaded it is now telling me there is no update available!!!
I have changed USB ports, done a FULL reset of the Xperia Z including wiping all data. It's absolutely wiped clean and booting 4.4.2.
Common Sony... did you test this process first? I did searching on the forums and apparently this very same problem has been common on some of the Xperia's in the past.
This should be the simple part.

Javascript error when updating the jsf-impl.jar from 10.1.3.1 to 10.1.3.0

Hiya,
I have my application running on Jdeveloper 10.1.3.0. When I am upgrading the jsf-impl.jar file from 10.1.3.1 to my 10.1.3.0 , the application started giving javascript warning errors on every pages, although the functionality is working fine.
Any suggestion or idea is welcome.
Thanks in advance,
Amitabh

Two things.
First I suppose you mean you are upgrading from 101.3.0 to 10.1.3.1 and not downgrading it? Secondly, most web browsers allow you to show what JavaScript error exactly is being given. That info might also help. And when it is being given.
Jan Kettenis
null

Error when updating ODS

Hi,
We got an error when updating ODS.
The error message is "RSDRO_UPDATE_ODS".
Its fetching all the records and its giving an error "when saving the aggregation information for ODS".
We rectified the error.
But how to fix it permenantly, what might be the reason for this error.
Thanks in advance!!

hI,
I executed the program and there are no errors in the program and the program is active, but still we are often getting the error when updating the data in ODS.
Please suggest me what might be the problem behind this....
Thnaks in advance!!

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." c

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." Anyone have a fix for this?

Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

Error when running the apxldimg.sql to update the images direct from rel3.0

Hi everyone,
I'm new to APEX. I'm upgrading from v3.0 to v3.1. I'm on the post-installation, section on "Updating the Images Directory When Upgrading from Release 3.0", I ran into error below when running the apxldimg.sql script. Has anyone run into the is error before. If yes, how did you fix it?
Directory created.
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
ERROR at line 15:
ORA-06550: line 15, column 36:
PLS-00306: wrong number or types of arguments in call to 'XMLTYPE'
ORA-06550: line 15, column 25:
PL/SQL: Item ignored
ORA-06550: line 38, column 15:
PLS-00302: component 'EXISTSRESOURCE' must be declared
ORA-06550: line 38, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored

My team member found another post that ran into the same problem and the section is for 11g only. My db is 9.2.0.5.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

RPLDAP_EXTRACT - Error when updating the LDAP directory

Similar Messages

Maybe you are looking for