RPM installation error on Linux 4 during installation of R12
On Linux 4 during pre-requisite steps of R12 i found following error.
rpm -ivh gcc-3.4.6-3.i386.rpm
warning: gcc-3.4.6-3.i386.rpm: V3 DSA signature: NOKEY, key ID 0c98ff9d
error: Failed dependencies:
cpp = 3.4.6-3 is needed by gcc-3.4.6-3.i386
Please guide me.
Best Regards,
Download and install cpp-3.4.6-8.i386.rpm from:
http://lwn.net/Alerts/232723/
Similar Messages
-
Error in ECC6 During installation
Dear all
Error in ECC6 During installation , the following contents is get from sapnst_dev.log
148556: if ( componentToBeCalled == 'NW_Usage_Types_Configuration_BI_ind_ind_ind_ind')
148557:
148560: if ( componentToBeCalled == 'NW_Call_Offline_CTC_ind_ind_ind_ind')
148561:
148564: }
ERROR 2008-06-27 07:43:37 [iaxxejsbas.cpp:178]
EJS_ErrorReporter
FJS-00003 TypeError: spStringRE.exec(labelString) has no properties (in script NW_Onehost|ind|ind|ind|ind, line 63483: ???)
ERROR 2008-06-27 07:43:37
FCO-00011 The step validateContent with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent was executed with status ERROR .
TRACE
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
INFO 2008-06-27 07:45:05 [iaxxgenimp.cpp:782]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent".Up !?
-
What do I do with error code 1935 during installation?
What do I do with error code 1935 during installation?
Error 1935 : Acrobat Help / Error 1935 | Install | Acrobat, Reader | Windows: http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Assembly component Microsoft.VC80.CRT | Install | CS4, CS5, CS5.5 products | Windows : http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html -
Cs6 installation error, inconsistency in the installer database, exit code 15
Hi,
I'm trying to install Photoshop CS6 on my new Mac.
After 2% have been installed, I get the error message "CS6 installation error, inconsistency in the installer database."
The error summary file shows exit code 15 and 0 fatal errors/errors/warnings.
I have seen other threads in this forum with the same error and I have tried the suggestions made there but so far, no luck.
My Photoshop CS6 is a downloaded version from the Adobe webpage. Everything works well until the actual installation starts.
These are the actions I have tried:
1. Restart and reinstall
2. Adobe cleaner tool (no result since there was nothing to clean)
3. I have deactivated the software from my old computer
4. Tried to install in safe mode
5. I have been in touch with Adobe support, did not get much support at all. After some time I was told to start a discussion in this forum.
Please help... spent two days on this already.Jeff, thank you for your answer.
I have tried to follow the instructions on the link you provided. So far I have not succeded though.
I downloaded the latest version of the Adobe Application Manager. But for some reason, when I start the application, the Creative Cloud application starts... I don't know what I am doing wrong in this step. I do not use creative cloud and Photoshop CS6 is not available for installation there, only Photoshop CC.
How do I install the software through Adobe Application Manager and not the installer that was provided with the download of Photoshop CS6? -
Indesign standard version installation error for Mac OS: "installer failed to initialize. Please download Adobe Support Advisor to detect problem". Transferred by application over to new laptop, application considered damaged, with instructions to reinstall. Attempting from downloaded file.
go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774 -
Error code 50 during installation
I keep getting error code 50 during my CC desktop update installation. What do I need to do?
Error 50 https://forums.adobe.com/thread/1432237 may help
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
R12.1.1 installation error on linux oel6.1 os
Hello Sir,
I double checked pre requisites of R12.1.1 Installation Note.761566.1 and i am getting following error
./rapidwiz
Rapid Install Wizard is validating your file system......
4 dvd labels found
Rapid Install Wizard will now launch the Java Interface.....
[root@katams rapidwiz]# Exception in thread "main" java.lang.UnsatisfiedLinkError: /d01/StageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.load0(Unknown Source)
at java.lang.System.load(Unknown Source)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
For this Error i checked Doc [ID 824249.1] and i queried for rpm checking
$rpm -q --qf '%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n' libXi
i am getting libXi-1.3-3.el6 (x86_64)
according to this doc i need to install following rpms
libXi-1.0.1-3.1 (x86_64)
libXi-1.0.1-3.1 (i386)
and i checked this link: Re: rapidwiz won't start - Exception in thread "main" java.lang.UnsatisfiedLink and
I downloaded the rpm and i tried to install but i am unable to install these rpm's How can install these rpm's
Please help me this scenario.
Thank You,
SatishHello Sir,
Installation was started and database is up and running
but application is not coming up when start the application getting error and i checked installation log file it shows some errors
RW-50016: Error: - {0} was not created:
File = {1}
AC-00439: Creation of file /tmp/tmpPROD_katams.xml failed
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00446: File not found: java.io.FileNotFoundException: /tmp/tmpPROD_katams.xml (No such file or directory)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00446: File not found: java.io.FileNotFoundException: /tmp/tmpPROD_katams.xml (No such file or directory)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /d01/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 125
Configuration Upload
RW-50016: Error: - Database ORACLE_HOME environment file was not created:
File = null/%s_dbSid%.env
I checked /etc/hosts file also
[applmgr@katams etc]$ more /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.153.153 katams.oracle.com katams
[applmgr@katams etc]$ ping katams
PING katams.oracle.com (192.168.153.153) 56(84) bytes of data.
64 bytes from katams.oracle.com (192.168.153.153): icmp_seq=1 ttl=64 time=0.062 ms
64 bytes from katams.oracle.com (192.168.153.153): icmp_seq=2 ttl=64 time=0.081 ms
^C
--- katams.oracle.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1633ms
rtt min/avg/max/mdev = 0.062/0.071/0.081/0.012 ms
[applmgr@katams etc]$ ping katams.oracle.com
PING katams.oracle.com (192.168.153.153) 56(84) bytes of data.
64 bytes from katams.oracle.com (192.168.153.153): icmp_seq=1 ttl=64 time=0.071 ms
^C
--- katams.oracle.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 975ms
rtt min/avg/max/mdev = 0.071/0.071/0.071/0.000 ms
[applmgr@katams etc]$
and i tried to run the autoconfig also but it is getting errors.
Please help me in this scenario -
How To solve the error FJS 0012 during installation IDES4.7
Hi,
I got an error FJS00012 during installation of IDES4.7. How to solve the problem? is there any way to solve the problem..... please suggest me.... and send a mail to [email protected]..
regards
SankarPlease post the relevant parts of the logfile, I don'T think, someone here knows all the error messages out of his head..
Markus -
OIM9101 installation error in linux
Hi All,
We need to install OIM 9101 on Linux with Weblogic on clustered mode.
We have created a single instance of Oracle Database and created the schema.
Weblogic is installed, yet to configure the cluster mode.
While installing OIM 9101 we are getting the following error.
Installing Oracle Identity Manager. Please wait...
|-----------|-----------|-----------|------------|
0% 25% 50% 75% 100%
|||||||||||
1. Yes
2. No
JAVA_HOME exists on this system and it has been modified since installation. Do
you want to restore this environment variable? [1]1
|-----------|-----------|-----------|------------|
0% 25% 50% 75% 100%
|||||||||||
userLanguage = en
userCountry = US
java.io.IOException: Cannot run program "/opt/oracle/xellerate/config/keytool_svr.sh" (in directory "/opt/oracle/xellerate/config"): java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
at java.lang.Runtime.exec(Runtime.java:593)
at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source)
Actually we had JRockit installed earlier on the same environment, later we switched to Sun JDK.
But the error seems to be that still Sun JDK is not reflected in the environment.
Can anyone suggest on the same?
Thanks in Advance
ShrinathHi,
I am facing same problem,did u get any resolution for the problem faced........
I am installing OIM 9101 on Linux RHEL 5.4 with Weblogic 10.3 on clustered mode.
While installing OIM 9101 I am receiving the following error.
After the installation is completed till 25% I am receiving the below mentioned error. I have set the JAVA_HOME and PATH variables in the console where i am running the installer and I have tried setting it in the bash_profile as well.
Has anyone faced this issue before and any idea about what is causing this issue and what is the workaround to avoid this.
ERROR
Installing Oracle Identity Manager. Please wait...
0% 25% 50% 75% 100%
1. Yes
2. No
JAVA_HOME exists on this system and it has been modified since installation. Do
you want to restore this environment variable? [1]1
0% 25% 50% 75% 100%
userLanguage = en
userCountry = US
java.io.IOException: Cannot run program "/opt/oracle/xellerate/config/keytool_svr.sh" (in directory "/opt/oracle/xellerate/config"): java.io.IOException: error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
at java.lang.Runtime.exec(Runtime.java:593)
at com.installshield.util.Java2ProcessExec.processExec(Unknown Source)
at com.installshield.util.ProcessExec.executeProcess(Unknown Source)
at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(Unknown Source) -
LMS4.1 Installation error code 2203 during Visual-C
Hello,
During installation of LMS4.1 short before finish, there was this error 2203 shown we had to confirm by OK several times.
It was during the installation tried to update Visual-C 2005 Redistrubuted.
It has nott been written into the install_log.
The 1st impression is that everything else is working fine, Processes I expecting are running.
Can we ignore this? If not could DotNet3.5.1 be the cause and it will be good enough to remove DotNet3.5 without need
the high time consuming de and new installation of LMS?
thx for answer,
SteffenHello George54701,
The following article provides steps that can help get iTunes successfully updated.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
Error RW:50004 during install of R12 on win 2003
Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad. -
Error (MUT-02041) during Installation of Enterprise Portal 6.0
Hi,
I have got a serious problem during the installation of SAP EP 6.0.
<b>Background Information:</b>
I succesfully installed Netweaver '04 Web AS Java 6.40 system. Operating System is Red Hat Enterprise Linux 3. SAP Database is MaxDB 7.50.
<b>Problem Description:</b>
During step 2 (Deploy JDBC Libraries) of the portal installation process the installation routine stops with error code MUT - 02041.
<b>Complete Error Message:</b>
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile /tmp/sapinst_instdir/NW04SR1/EP/EP/callSdmViaSapist.log.
<b>Output of Logfile:</b>
Error: Aborted: development component 'com.sapportal.datadirect'/'sap.com'/'SAP AG'/'609.20041012102246.0000':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: Error: Cannot connect to HOST: [CG-DEV-SERVER] with user name: [Administrator]
Check your login information.
Exception is: com.sap.engine.services.jndi.persistent.exception.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
Error: -
At least one of the Deployments failed -
<b>What I tried do solve the problem:</b>
I used the Visual Administrator tool to check the user "Administrator". (I used the user "Administrator" to connect to the J2EE Engine - localhost, port 50004).
Administrator is not locked, is member of group Administrators, member of group Authenticed Users, member of group Everyone, is valid until year 2500 and has 80 succesful logon counts.
The user looks fine to me. I do not know what else I could check to solve the problem. Anything I forgot to check? I am grateful for any kind of help (pointer to docs, advise, step by step solution).
Cheers Martin
Message was edited by: Martin KellermannHi,
here an uodate of the progress I am making to solve the problem described above.
Due to the output of the logfile (User not authorized), I think the "Administration" user does not have enough rights to perform the required actions needed for the installation.
Well, I looked it up (Visual Administrator --> Cluster --> Server 0 ... --> Services --> Security Provider -->Runtime --> Policy Configurations --> "service.naming" in "Components" List --> Security Roles).
According to http://help.sap.com/saphelp_webas630/helpdata/en/de/83343ecc7f892ee10000000a114084/frameset.htm, all users and groups that are granted permission "jndi_all_operations" can perform all operations available in the naming system.
I checked and found out that jndi_all_operations is merely a role reference to security role "administrators". Group "Administrators" is assigend to security role "administrator". As I mention before, user "Administrator" is member of group "Administrators". I think user "Administrator" has been granted all required permissions.
Am I wrong, what else could cause such an error message! Need some guideance.
Martin -
Oracle 10g installation error in linux...
Hi,
i am getting following error when installing oracle 10g(10.2.0.1) in RHEL4.i have installed following required packages also.
binutils-2.15.92.0.2-21
compat-db-4.1.25-9
control-center-2.8.0-12.rhel4.5
gcc-3.4.6-3
gcc-c++-3.4.6-3
glibc-2.3.4-2.25
glibc-common-2.3.4-2.25
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.6-3
libstdc++-devel-3.4.6-3
make-3.80-6.EL4
pdksh-5.2.14-30.3
sysstat-5.0.5-11.rhel4
xscreensaver-4.18-5.rhel4.11
libaio-0.3.105-2
installActions2009-03-18_09-04-11AM.log
INFO: rm -f nnfgt.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/10.2.0/db_1/bin/gennfgt > nnfgt.c ;\
/usr/bin/gcc -c nnfgt.c ;\
rm -f /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ;\
mv nnfgt.o /u01/app/oracle/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/10.2.0/db_1/lib/libn10.a /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o ; fi)
INFO: /bin/sh: /usr/bin/gcc: No such file or directory
INFO: mv:
INFO: cannot stat `nnfgt.o'
INFO: : No such file or directory
INFO:
INFO: /usr/bin/ar: /u01/app/oracle/10.2.0/db_1/lib/nnfgt.o: No such file or directory
INFO: make: *** [nnfgt.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'nnfgt.o' of makefile '/u01/app/oracle/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-03-18_09-04-11AM.log' for details.
Exception Severity: 1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Thanks,what bit oracle software are You trying to install on what bit linux? 32bit for both?
show
uname -a
Required packages are these:
binutils-2.15.92.0.2-18
compat-libstdc++-33.2.3-47.3
elfutils-libelf-0.97-5
elfutils-libelf-devel-0.97-5
gcc-3.4.5-2
gcc-c++-3.4.5-2
glibc-2.3.4-2.19
glibc-common-2.3.4-2.19
glibc-devel-2.3.4-2.19
glibc-headers-2.3.4-2.19
libaio-devel-0.3.105-2
libaio-0.3.105-2
libgcc-3.4.5
libstdc++-3.4.5-2
libstdc++-devel-3.4.5-2
make-3.80-5
sysstat-5.0.5
unixODBC-2.2.11
unixODBC-devel-2.2.11
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
control-center-2.8.0-12
gnome-libs-1.4.1.2.90-44.1
pdksh-5.2.14-30
xorg-x11-deprecated-libs-6.8.1-23.EL
openmotif21-2.1.30-11.RHEL4.2 (Required to install Oracle Demos)
do you have them all?
querry with
rpm -aq | grep ....
If You have metalink access then read metalink note 401705.1 -
Hi,
While I am trying to install Oracle software on RAC setup.I am getting following linking error message at OUI. If I ignore the massage and clink on "continue" then database software is installed successfully.
Configuration detail.
1. OEL 5.4 (2 Nodes)
2. ASM
3. Clusterware 11.2.0.2
4. Installed RPM details checked from following link and looking fine.
http://download.oracle.com/docs/cd/E11882_01/install.112/e16769/toc.htm#BHCGAEJA
After investigated the issue I found following error message in make.log
/usr/bin/make -f ins_ctx.mk install ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/dbhome_1/gcc -o ctxload -m32 -L/u01/app/oracle/product/11.2.0.2/dbhome_1/ctx/lib/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/stubs/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ -lirc -lipgo /u01/app/oracle/product/11.2.0.2/dbhome_1/ctx/lib/sdrz.o -lctxs11 -lctx11 -lctxs11 -lzx11 -lgx11 -lctx11 -lzx11 -lgx11 -lclntsh `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnro11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnnz11 -lzt11 -lztkg11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lmm -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnro11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/product/11.2.0.2/dbhome_1/lib -lm `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/sysliblist` -ldl -lm -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib//libirc.a when searching for -lirc
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib//libirc.a when searching for -lirc
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/libirc.a when searching for -lirc
/usr/bin/ld: cannot find -lirc
collect2: ld returned 1 exit status
make: *** [ctxload] Error 1
Kindly suggest what can be done to resolve the issue.
Thanks-
RajdeepHi,
I have 64-bit machine on which OEL 5.4 O/S os installed.I used correct version of Oracle database (11.2.0.2) software to install.
Please refer the output of versions are used.
uname -a
Linux Node-01 2.6.18-164.el5 #1 SMP Thu Sep 3 04:15:13 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Following are the database software setup used for installation.
p10098816_112020_Linux-x86-64_1of7.zip
p10098816_112020_Linux-x86-64_2of7.zip
For any doubt of version, I used same setup to install database software version (11.2.0.1) and succeed in that.But when tried for 11.2.0.2 installation on same setup then failed. I feel this is some other issue.
Thanks-
Rajdeep -
CF MX 7 Installation Errors on Linux
I have been planning to put a production web server up using
Fedora Core 5 and Cold Fusion MX 7 for some time - Mainly because
the updates on FC5 are done so much more frequenntly than most
other versions of Linux I've used.
So far, the only production web servers I've had up have been
Windows, but I've really enjoyed how well Fedora has run my DNS and
email in the arenas of stability and performance.
So, I thought it'd be best to try a test install on FC5
first. I installed the normal packages for a web server including
Apache, and I
disabled SE Linux to begin with (I might tighten it down
later).
I logged in as root, and attempted the CF Installation, and I
received a series of errors that did not show up in
/var/log/messages or anywhere else I could find. I also tried doing
a chmod on all the installation directories to 777 (all privs
granted for all users), and I verified all directories and files
exist. I'm curious if anyone else has had this problem. I
copy/pasted the context of what I saw below for reference. Any
suggestions would be appreciated. Thanks!
Bob Wiley
[root@localhost ~]# ./coldfusion-702-lin.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot
open
shared
object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open
shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open
shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open
shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open
shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open
shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot
open
shared
object file: No such file or directory
/tmp/install.dir.8552/Linux/resource/jre/bin/java: error
while loading
shared libraries: libpthread.so.0: cannot open shared object
file: No
such
file or directory
[root@localhost ~]#Thanks for the plug Melvin.
I've recently addressed this specific problem with libc.so.6
in a comprehensive blog entry on Running ColdFusion 7.02 on Fedora
Core 6:
http://www.talkingtree.com/blog/index.cfm/2006/12/6/Running-ColdFusion-MX-7-on-Fedora-Core -6-Linux
Maybe you are looking for
-
How to find the Size of a Folder &also list the sub folder and files in it
In my program I want to know the size of a folder . The input given is the path of the folder and the ouptut should be the list of files and subfolders with their size. What is the function we have to use for this? Thank you
-
Hello, Of the several products we develop, one, a Java program, uses the Java Help help system (logically). The others use a standard Winhelp help system (developed in Robohelp). Our current workflow for developing a help system for the Java program
-
How do you change text bubble color on iPhone4?
I do not want to Jailbreak my iphone4 but I want to change the bubble color on my texts. I see on the iOS 4 preview that the text bubble color is light blue. How do I change mine?
-
Help on testing algorithm time
Hello everybody: I want to ask a question about testing algorithm time. In my program, I always got the encryption time is zero. And some times is 15ms or 16ms. I test the time like this (ignore the unnecessary part): long startTime = TimeCounter.sta
-
is it possible to join table PLPO and PLMZ? When I join, it doesn't give the correct data. Thanks.