RPM Upload/Download Project Data u2013 No Selection list for Application system

When trying to upload from project or download to project from/to application SAP Project System there is no selection list under the drop down field for Application system. As I understand from the RPM guides, this is the logical system. We have defined the logical systems in IMG. Is there some other configuration we are missing?
We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
Any help appreciated

Hi,
Have you deleted cache and tried it again.
Pramod

Similar Messages

  • Error while download the data to an Excel sheet for ECC report from EP

    Hi experts,
    I had created a report program which will download the data to an Excel sheet using SAP OLE object
    For this report i had created a tcode too. The report which i developed is perfectly working fine in SAPGUI. But if i download the data to an Excel sheet for the same report throught SAP EP.I am getting the  error that "Error in excel downlaod"
    I analyed by putting dubigg point and it throws exception while calling Function module.
    The excpetion is " OLE object id not found".
    Can any body gives a light on this why i'm not able download the excel in ep?
    Thanks,
    JB

    Hello,
    (by the way I came here to ask my question and is my first time visit but...)
    The problem is obvious: How do you expect OLE handler can "touch" the local PC Excel through a web browser? I believe that is not possible. That means (at least for me) that I have to create the whole documents before I return them to the user. That is why I use XML Office documents generation or you can try to hack some Export to excel features of ERP reports.
    Regards Otto

  • Limit selection list for variables

    Hello Experts.
    Is there a way to limit the selection list for variables?  For example, there are many possible currency values for 0CURRENCY, but I want allow the user to choose only one of these choices USD, EUR, or HKD.  I would rather not do a validation check subsequent to the users making their selection.
    I must use 0CURRENCY rather than copying it to another characteristic and entering only those three keys in master data.
    Any ideas?
    Kind regards,
    Aron
    Edited by: Aron Weaver on Oct 1, 2010 1:08 AM

    If you are using the standard info object which is referring to '0CURRENCY' then it mayn't be possible to restrict the 'F4' list to few currencies in the standard BEx environment. There are couple of options to limit the 'F4' selections using the web template /BSP technology.

  • Open qty errin Selection list For Ref Doc. screen while converting to order

    Hi SAP Gurus,
    For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
    Can you please help me?
    Thanks,
    Ketan

    Hi Senthilkumar,
    I really appreciate for your kind Hint of SEL ID.
    I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
    Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
    Regards,

  • Is it possible to change values in pagination select list for a report?

    The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
    Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
    APEX version 3.0
    Thanks

    Figured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.

  • "Key and Text" values in variable selection list for a field

    Hi,
          we have created the variable for the one of the navigation attributes of the "0customer" field .
          for the customer field in BEX settings we are having "Text" as display.
          for the navigation field in BEX settings we are having "Key" as display.
          while running the reports in the variable selection list for some reports we having both KEY and text for selection and for others only text are displayed,
        we have checked the BEX settings in field and query level there are same.
    Please help us here.

    Check the setting again in the Query level and then maku sure you save it. Come out of the query and then re-open the query and execute, you can see the chages in the output.

  • HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications.  How is this possible. Can someone help me understand this.  Thanks.

    I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications.  How is this possible. Can someone help me understand this. 

    I assume you are including the STIX font as part of your epub files?     
    Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
    http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

  • Oracle 10g - Date format in SELECT query for CFOUTPUT

    Hello, everyone.
    The project that I am working on in the dev environment is connected to an Oracle 11g database, but the production side is Oracle 10g.
    I have a page that is erroring in production (but not development) when it gets to a date that it needs to display.
    A co-worker mentioned that, in 10g, if a date/time is being SELECTed, you have to put it in to_char(), so I did that.
    But it's still erroring, and I'm not getting an error message, so I'm assuming that I have an incorrect format for the date in the SELECT.
    What is the proper format for SELECTing a date/time when using to_char()?  Right now, I have SELECT to_char(create_date,'MM-DD-YYYY HH:MI') FROM tableA .  Is this not correct for CF to output?
    Thank you,
    ^_^

    Please see my original post ("I have a page erroring in production (but not in development) when it gets to a date that it needs to display.")  Sorry if it came across as vague.  It made sense, to me, when I typed it.  But, then, I'm usually typing fast just to get the question out there, when I'm in a hurry.
    Haven't done a CFDUMP, yet, as every time I make a change in development that needs to be tested in production, I have to notify my supervisor that there are files that need to be copied into production, which can sometimes take a while, so I try to do troubleshooting on dev side - it's a pain in the you-know-what, but that's the kind of environment I'm working in.
    As it turns out, changing the format in the SELECT to_char() did the trick.  If anyone else has this issue with Oracle 10g, I'm now using SELECT to_char(create_date,'YYYY/MM/DD HH:MI') FROM tableA, and now the CFOUTPUT is processing the whole page.  I guess the MM-DD-YYYY threw CF into a tizzy, breaking the process?
    Anyhoo, it's working, now.  Thank you, Dan and Adam, for your thoughts on this.
    ^_^

  • Upload / Download document to KM Content Server from WebDynpro Application

    I have a requirement where I need to upload / download document into / from KM Content Server from my WebDynpro Application.
    Is it technically possible and if Yes, can I get any Sample code for this.

    Hi Tahzeeb,
    first of all i would point you to the JavaDocs for KMC API.
    https://media.sdn.sap.com/javadocs/NW04/SPS15/km/index.html
    And here is a small example of reading and storing KM resources.
    For reading:
         * Returns a resource as an InputStream from the KM repository
         * at the given path. The IUser is needed for authorization.
         * @param user      IUser for checking authorisation.
         * @param resPath   Path to the KM resource.
         * @return          Requested resource as a stream.
        private InputStream getKmResource(final IUser user, final String resPath)
            throws ResourceAccessException {
            try {
                final IResourceFactory factory = ResourceFactory.getInstance();
                final RID rid = RID.getRID(resPath);
                final IResource kmResource =
                    factory.getResource(
                        rid,
                        new ResourceContext(getDeprecatedIUser(user)));
                if (kmResource == null) {
                    throw new ResourceNotFoundException(
                        "KM resource not found: " + resPath,
                        resPath);
                return kmResource.getContent().getInputStream();
            catch (WcmException e) {
                throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
    And for writing:
         * Stores a resource in the KM repository at the given path with the given name and mimetype.
         * Content is taken from the given inputstream.
         * @param user          IUser for checking authorisation.
         * @param resName   Name of the resource
         * @param resPath     Path to the resource
         * @param mimeType MimeType of the resource
         * @param inputStream  Resource content
         * @throws ResourceAccessException
        private void putKmResource(
            final IUser user,
            final String resName,
            final String resPath,
            final String mimeType,
            final InputStream inputStream)
            throws ResourceAccessException {
            try {
                final ResourceContext rContext = new ResourceContext(getDeprecatedIUser(user));
                final RID rid = RID.getRID(resPath);
                final ICollection kmCollection =
                    (ICollection) ResourceFactory.getInstance().getResource(rid, rContext);
                if (kmCollection == null) {
                    throw new ResourceNotFoundException(
                        "KM resource not found: " + resPath,
                        resPath);
                else {
                    IContent kmContent = new Content(inputStream, mimeType, -1);
                    IResource kmResource = kmCollection.createResource(resName, null, kmContent);
            catch (ResourceException e) {
                throw new ResourceAccessException("Error accessing KM resource: " + resPath, e, resPath);
            finally {
                try {
                    inputStream.close();
                catch (IOException e1) {
                    throw new ResourceAccessException("Error closing InputStream when accessing " + resPath, e1, resPath);
    Hope that helps for a start.
    Best regards,
      ok

  • Data display in Select List

    Okay, here's an easy one for you gurus. I've searched the forum but I can't seem to find how to control this.
    I've got a couple select lists on my page. When I click to get the list of values some of the select lists diplay the data downwards, below the field. However there's one select list that displays the data upwards. Why is this one doing this? Only difference I can see as this one has more data than the others.
    Thanks for your help!

    My guess would be that it's a browser-specific decision based on the size of the list and its proximity to the bottom of the visible portion of the page. Try a different browser and/or scrolling the box closer to the top of the screen.
    -David

  • Updating a table with the data from the select list

    I have 2 select lists on a page...first select list displays vendor no and vendor name from the table vendor (vendor_no, vendor_name, address, city, state, zip, ph no)
    second list displays contact no and contact name from the table contact (contact_no, contact_name, email_addrs)
    i have a submit button...once it is clicked the vendor_no from the first list and the contact_no from the second list must be inserted into the third table vendor_contact (vendor_contact_no, contact_no, vendor_no) and also there must be a condition to check if the entry already exists or not...can any one tell me how this can be done...

    Why not design your page just on your third table (vendor_contact), and those fields (which will already be defined as part of that table) can be defined there as your select lists. Then make sure you have a Primary Key (or Unique Key) defined on the table to prevent duplicates.
    It makes for a much cleaner looking page, and far easier to implement as well.
    Hope this made sense and helps.
    Bill Ferguson

  • AP Payment User Responsbility's Data Group to be assigned for application as Payables or Payments?

    Hi,
    I am in version R12.1.3 . I have a requirement to create a user who must have access only to create payments in AP module.So when i try to define a responsibility for this payment user
    there is a data group to be assigned. In this data group block for application there are 2 options i.e Payables & Payments? What should I select & what is the difference of selection one over the other?
    Appreciate your help.
    Thanks

    Hi,
    i did not see any difference .... I performed a test case, where i created a payment using the new responsibility i have created having data group application as Payments, the payment was successful ... Later i have modified the data group for this new responsibility from payments to payables, then the test payment i have made was also successful....
    Not sure about its impact, may be i am having responsibilities which has full access, hence i cannot see the difference in my environment ....
    Regards,
    Ivruksha

  • Multiple select list for one field in form

    Friends,
    I have a form , which is having many fields. One of the field are day/date. In this field i have to take 3 dropdown lists. like one for date, one for day and another for year. I have created three lov's for the day,date and year but for the field day/date i am able to apply only one lov. Any way so that i can display all the three lov for one field
    example
    day/date: day -- (dropdown list)
    date -- (dropdown list)
    year -- (dropdown list)
    thanks in advance
    adi
    Edited by: Adi's on Feb 16, 2010 11:46 PM
    Edited by: Adi's on Feb 16, 2010 11:47 PM
    Edited by: Adi's on Feb 16, 2010 11:52 PM

    nope, I just gave u an example to combime day , date and year fields in one select list, it does not matter whether they are in one table or multiple table and you dont require to create any tables for this, I assumed your lov for day / date / year are dynamic not static.
    Regards,
    Shijesh

  • How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across.  However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

    I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro.  I'm finding that it doesn't run as quickly as it used to. 
    A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library.  Keep all documents, pictures, music etc on the current hard drive. 
    I would be grateful if someone could help me with:
    1) installing OSX on the SSD without copying across data from the current hard drive
    2) transferring applications, system and library folders across to the SSD so that they still function
    3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
    However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
    If anyone could help with this, it would be much appreciated.

    If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
    Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD  using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
    There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
    Clinton

  • Onchange events when transforming select lists for EXTJS integration

    Hi,
    We have the folloiwng code that transforms select lists to extjs combo boxes
      var selectfield = Ext.query('select[class!="shuttle"][class!="multiselect"]');
      for (var r = 0; r < selectfield.length; r++) {
        //If there is an onchange event then don't convert as onchange is lost
        //This is used for cascading LOVs so we need to find a way of getting this to work
        if((selectfield[r].onchange == '' || selectfield[r].onchange == null) && ((r>0 && selectfield[r-1].onchange == null) || r==0) && selectfield[r].id != 'apexir_NUM_ROWS') {
          var newselect = new Ext.form.ComboBox({
            //hiddenId: selectfield[r].id,
            //hiddenName: selectfield[r].id,
            id: selectfield[r].id,
            typeAhead: true,
            triggerAction: 'all',
            transform: selectfield[r].id,
            width: selectfield[r].clientWidth+5,
            emptyText:'Please select...',
            forceSelection: true,
            maxHeight: 200,
            disabled: selectfield[r].disabled
      }The code does not convert select boxes that have onchange events as the code above seems to suggest they get lost when transforming. Does anyone know if that is the case, and if not how I amend the code to include the onchange events from the original select lists.
    Regards
    Paul

    Hi Vee,
    Thanks for pointing it out -- here at work the only version of IE I have is 6 and I assumed (as usually is the case) it was because of a bug in that specific version. However, I have the all-powerful, (allegedly) standards-compliant IE 9 at home and it behaved exactly the same way!
    So you cannot say this is due to an old, non-supported browser. Surely it fits in the bug category then? After all events should not be triggered at random...
    Thanks also for the suggestion to fix it. I didn't try it because, in the end, I found out that if I use onchange instead of onblur (in the text field) the problem doesn't occur! onblur would be better, but onchange works fine for what I need.
    Thanks
    Luis

Maybe you are looking for