Rpmbuild fails with No such file or directory

Hi
OS Oracle Linux 6 Update 2 (64bit)
Linux 2.6.32-300.3.1.el6uek.x86_64
Following command fails
rpmbuild --rebuild virtualiron-4.5.16-11.src.rpm
error: File /root/rpmbuild/SOURCES/virtualiron-%{PACKAGE_VERSION}-11-src.tar.gz:
No such file or directory
Any ideas how to resolve this issue.

Moderator Action:
This thread has been moved from the Oracle Linux forum
to the Virtual Iron forum, for closer topic alignment.
You don't have a Linux issue.
You seem to have a V.I. issue that is perhaps all described in the V.I. documentation.

Similar Messages

  • Disk Utility "restore" fails with "no such file or directory"

    Some time back, perhaps a LONG time ago, I successfully used Disk Utility's "restore" function to "clone" my Mac OS X partition onto an external disk, before I upgraded the OS on my internal drive.
    This weekend I tried to do it again, and failed on every attempt.
    My first attempt was on my MacBook. At very end (the progress "bar" was all blue) it died saying that there was an error (2), "no such file or directory". I think the external drive probably isn't GUID, which would make it non-bootable, but I'd still think "restore" itself should work.
    Okay, let's try my Power Mac G5, which is where it worked several releases ago. Same thing.
    Okay, one more try... Booted into safe mode (in case background activity accounts for the missing file/directory), did the restore again, failed again.
    I realize that SuperDuper or Carbon Copy Cloner or other tools may be "better", but since this worked once it seems like it still should.
    Any ideas?
    Doug

    Did you:
    A. Repair the hard drive and permissions prior to cloning?
    B. Erase the destination drive before cloning?
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
    For added precaution you can boot into safe mode before doing the clone.

  • Burst to file fails with "no such file or directory"

    I have followed the example tutorial of bursting to a file at http://www.oracle.com/technology/obe/obe_bi/bipub/advance/advance.htm#t4s2 When I schedule a report to run immediately, the report fails and gives back the following information about 1 of 6 deliveries
    Delivery Key 123456789
    Delivery Type FILE
    Status Failed
    System Message C:\BIP/123456789.pdf (No such file or directory)
    I have created a BIP folder on my local hardrive, but is there anything else I have to do? Does the database server have to have permission to go to my IP address or subnet?
    Alex.

    Thanks for the info, I tried the following in my query
    select
    emp_emp KEY,
    'hr_employee' TEMPLATE,
    'RTF' TEMPLATE_FORMAT,
    'en-US' LOCALE,
    'PDF' OUTPUT_FORMAT,
    'FILE' DEL_CHANNEL,
    '//111.222.333.444/BIP' PARAMETER1,
    emp_emp || '.pdf' PARAMETER2
    from...
    and allowed my local C:BIP to be shared on the network and even allowed network users to change my files on this share.
    When I scheduled the report I got the same error message:
    Delivery Key 123456789
    Delivery Type FILE
    Status Failed
    System Message /111.222.333.444/BIP/123456789.pdf (No such file or directory)
    I noticed the "System Message" above dropped one of the slashes from my query. Do I still need to have the unix box where the database server resides have permission to access my subnet, or is the something else that is missing?
    Alex.

  • Btrfs send error - No such file or directory

    Hello,
    I have the following setup in my UX31A laptop.
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda7
    UUID=617b35f9-b0a9-4562-b6b6-ab4eea3eff99 / btrfs rw,noatime,compress=lzo,ssd,discard,space_cache,autodefrag,inode_cache,subvol=root 0 0
    # /dev/sda7
    UUID=617b35f9-b0a9-4562-b6b6-ab4eea3eff99 /home btrfs rw,noatime,compress=lzo,ssd,discard,space_cache,autodefrag,inode_cache,subvol=home 0 0
    # /dev/sda5
    UUID=5D37-A7ED /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
    UUID=e08eaf4d-f932-4cce-8086-8d4913e3dfab none swap defaults 0 0
    btrfs filesystem show
    Label: none uuid: 617b35f9-b0a9-4562-b6b6-ab4eea3eff99
    Total devices 1 FS bytes used 19.74GiB
    devid 1 size 66.82GiB used 39.04GiB path /dev/sda7
    Label: btrfs uuid: 3b31413b-081e-458f-87c2-b16276ceea94
    Total devices 1 FS bytes used 12.42GiB
    devid 1 size 638.53GiB used 15.04GiB path /dev/sdc2
    Btrfs v3.12
    btrfs sub list /
    ID 257 gen 20039 top level 5 path root
    ID 258 gen 20039 top level 5 path home
    ID 273 gen 19987 top level 5 path home/cesar/Downloads
    ID 281 gen 19997 top level 5 path home/.snapshot
    ID 282 gen 1391 top level 5 path home/.snapshot/back_clean_system
    ID 283 gen 7169 top level 5 path home/.snapshot/back_home
    ID 284 gen 7243 top level 5 path home/.snapshot/back_system_gnome
    ID 310 gen 19996 top level 5 path home/.snapshot/back_system_23-03-14
    ID 311 gen 19998 top level 5 path home/.snapshot/back_home_23-03-14
    btrfs sub list /run/media/cesar/btrfs/
    ID 257 gen 69 top level 5 path backup
    ID 258 gen 40 top level 5 path backup/back_clean_system
    ID 260 gen 45 top level 5 path backup/back_home
    ID 263 gen 59 top level 5 path backup/back_system_gnome
    Here's the deal, when I try to send a backup from my system to the external disk with the the following command
    btrfs send -v /home/.snapshot/back_home_23-03-14/ | btrfs receive -v /run/media/cesar/btrfs/backup
    this error appears even though the folder clearly exists 
    At subvol /home/.snapshot/back_home_23-03-14/
    ERROR: open home/.snapshot/back_home_23-03-14 failed. No such file or directory
    If I boot the computer from the arch live image, I can send snapshots from one filesystem to another without a problem.
    What might be my error?
    Last edited by cfsc (2014-03-23 23:09:13)

    When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.

  • Looking for Users but Terminal says No such file or directory

    Hi I'm trying to delete something out of my DVD Studio Pro cache but when I look for the Library it has gone. I've tried calling it up in Terminal with 'chflags nohidden ~/Library' and it comes back with No such file or directory. Has anyone lost their library completely?
    Thanks,
    Des

    Are you entering that command with the quotes? If so remove them. Also, use Go to folder (Cmd-shift-g) and enter just ~/Library. I bet everything is still there.

  • Errinfo, "no such file or directory" --- what file???

    I've got a situation where I'm seeing hundreds of cp exec with "no such file or directory". I'm wondering what the best way to find out which file/path "cp" was initiating against so to rectify the problem or have the developer put in a fix to his/her application.
    Sample output (this is a 120 second run):
    errinfo -cn cp
    EXEC SYSCALL ERR COUNT DESC
    cp stat64 2 9 No such file or directory
    cp open 2 10 No such file or directory
    cp xstat 2 280 No such file or directory
    Thanks in advance for any help.

    I suppose that cp will check if the target exists before copying a file..
    If you run
    cp source destination
    it will probably do 'stat' on 'destination', to ensure that the file doesn't exists before attempting the actually copy..
    .7/M.

  • ORA-27369: job of type EXECUTABLE failed with exit code: No such file or directory

    Hi,
    I am using the scheduler to take backup of the dev database and it was working fine. Then I added notification to the scripts and then the scheduler started failing with the following code .
    BEGIN dbms_scheduler.run_job('BACKUP_DEV'); END;
    ERROR at line 1:
    ORA-27369: job of type EXECUTABLE failed with exit code: No such file or
    directory
    ORA-06512: at "SYS.DBMS_ISCHED", line 150
    ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
    ORA-06512: at line 1
    Here' the original which has no issues
    #!/bin/bash -x
    echo $@
    if [ -z "$ORACLE_HOME" ]; then
    source /path/oracle/.bash_profile
    fi
    RMAN="${ORACLE_HOME}/bin/rman";
    ${RMAN} $@
    exit $?
    And here's the one which gives me the errors. Also if I run this script from command line it works perfectly fine
    #!/bin/bash -x
    echo $@
    if [ -z "$ORACLE_HOME" ]; then
    source /path/oracle/.bash_profile
    fi
    RMAN="${ORACLE_HOME}/bin/rman";
    exec >> temp_log
    ${RMAN} $@
    /usr/bin/mailx -s "Backup status of $ORACLE_SID " [email protected] < temp_log
    /usr/bin/rm temp_log
    exit $?
    Pls let me know what could be the reason that the script fails with the scheduler.

    Hi,
    The user oracle who owns the scheduler already has permissions for the mailx and the same script is able to send notifications when run manully. Do I need to set additional permissions for scheduler ?
    Also the db version is 10.2.0.5.
    Thanks

  • Getting "Warning: The file upload failed.No such file or directory." while trying to upload image using af:inputFile

    Hi,
    I have a <af:inputFile> component which will upload only image file and render  the corresponding image...
    It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
    I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
    And in BPM whenever i upload PNG file it throws this error.
    Please help.

    For some files like Images with .png extensions it gives following error :
    java.io.IOException: No such file or directory
      at java.io.UnixFileSystem.createFileExclusively(Native Method)
      at java.io.File.checkAndCreate(File.java:1705)
      at java.io.File.createTempFile0(File.java:1726)
      at java.io.File.createTempFile(File.java:1803)
      at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
      at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
      at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
      at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
      at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
      at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
      at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
      at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
      at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
      at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
      at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
      at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  • Failed at step EXEC spawning /bin/plymouth: No such file or directory

    Hi guys, Yet Another Plymouth Problem:
    I just did a system update. Haven't done this for several months and problems with /bin happened, as expected. Anyway, after update completed, the system won't boot normally:
    If I type ^d boot continues with no problems and all services are started as expected. I have trouble finding what causes the system to go to emergency mode. The /srv/nfs/trunk/ seems to be mounted at a second attempt.
    An excerpt from journalctl -xb, right after the xfs messages :
    Sep 18 00:55:50 xxxlinux systemd[1]: Startup finished in 2.322s (kernel) + 1.350s (userspace) = 3.672s.
    -- Subject: System start-up is now complete
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- All system services necessary queued for starting at boot have been
    -- successfully started. Note that this does not mean that the machine is
    -- now idle as services might still be busy with completing start-up.
    -- Kernel start-up required 2322291 microseconds.
    -- Initial RAM disk start-up required INITRD_USEC microseconds.
    -- Userspace start-up required 1350682 microseconds.
    Sep 18 00:55:50 xxxlinux systemd[168]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
    -- Subject: Process /bin/plymouth could not be executed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/641257651c1b4ec9a8624d7a40a9e1e7
    -- The process /bin/plymouth could not be executed and failed.
    -- The error number returned while executing this process is 2.
    Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Version 2013.1.13 external FUSE 29
    Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Mounted /dev/sdb6 (Read-Write, label "", NTFS 3.1)
    Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Cmdline options: rw,uid=1000,gid=100,dmask=022,fmask=133
    Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Mount options: rw,allow_other,nonempty,relatime,default_permissions,fsname=/dev/sdb6,blkdev,blk
    Sep 18 00:55:50 xxxlinux ntfs-3g[294]: Global ownership and permissions enforced, configuration type 7
    Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:0: [sde] Attached SCSI removable disk
    Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:1: [sdf] Attached SCSI removable disk
    Sep 18 00:55:50 xxxlinux kernel: scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:2: [sdg] Attached SCSI removable disk
    Sep 18 00:55:50 xxxlinux kernel: sd 6:0:0:3: [sdh] Attached SCSI removable disk
    After I press ^d:
    Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Sound Card.
    -- Subject: Unit sound.target has begun shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sound.target has begun shutting down.
    Sep 18 00:56:21 xxxlinux systemd[1]: Stopped target Sound Card.
    -- Subject: Unit sound.target has finished shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/9d1aaa27d60140bd96365438aad20286
    -- Unit sound.target has finished shutting down.
    Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Emergency Mode.
    -- Subject: Unit emergency.target has begun shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit emergency.target has begun shutting down.
    Sep 18 00:56:21 xxxlinux systemd[1]: Stopped target Emergency Mode.
    -- Subject: Unit emergency.target has finished shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/9d1aaa27d60140bd96365438aad20286
    -- Unit emergency.target has finished shutting down.
    Sep 18 00:56:21 xxxlinux systemd[1]: Stopping Emergency Shell...
    -- Subject: Unit emergency.service has begun shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit emergency.service has begun shutting down.
    And the system boots.
    I found a thread explaining that there is a sysV runlevel specified in kernel boot line. I am not sure if I am looking at the proper file, but my /boot/grub/grub.cfg does not contain "runlevel".
    I also found it may be a problem of software RAID, but I am not using it neither LVM, plain mounts by UUID.
    I ran pacman -S linux, /etc/mkinitcpio.conf does not contain a reference to plymouth: HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    Just checked with my laptop, both computers run systemd-204-3, neither have /bin/plymouth, but the laptop does not fail with this message
    Just tell me if you need more information.

    # Intel SSD 1
    UUID=775642a3-f485-4cc6-b9d5-c336aa276c39 / xfs rw,relatime,attr2,inode64,noquota 0 1
    # Intel SSD 2
    UUID=75232369-0f3f-45f5-99fe-234089a1ea8e /boot xfs rw,relatime,attr2,inode64,noquota 0 2
    # Intel SSD 3
    UUID=595fa411-2c31-48e1-960b-fad259460248 /home xfs rw,relatime,attr2,inode64,noquota 0 2
    # WD 1T 1
    UUID=4fcb28a9-66fe-4463-9f31-e325d62d5017 /mnt/wd1 xfs rw,relatime,attr2,inode64,noquota 0 2
    # WD 1T 2
    UUID=4803c5db-72a3-4cd5-ad94-f7de2de2ea09 /mnt/wd2 xfs rw,relatime,attr2,inode64,noquota 0 2
    # WD 1T 3
    UUID=b937ce12-31a4-4816-9630-d53cab774a7e /mnt/wd3 xfs rw,relatime,attr2,inode64,noquota 0 2
    # SG 320G 1 1
    UUID=76fd28c6-1541-40bd-958b-cd05d787ff7b /mnt/sg1_1 xfs rw,relatime,attr2,inode64,noquota 0 2
    # SG 320G 2 1
    UUID=789845B4984571A4 /mnt/sg2_5 ntfs-3g uid=1000,gid=users,dmask=022,fmask=133 0 0
    UUID=32BC47F9BC47B5DF /mnt/sg2_6 ntfs-3g uid=1000,gid=users,dmask=022,fmask=133 0 0
    tmpfs /tmp tmpfs nodev,nosuid,size=20G 0 0
    # NFS mounts
    /mnt/multimedia /srv/nfs/multimedia none bind 0 0
    /mnt/images /srv/nfs/images none bind 0 0
    /mnt/trunk /srv/nfs/trunk none bind 0 0
    [2] ognyan@xxxlinux : ~ >ll /mnt/
    total 40K
    drwxr-xr-x 8 root root 124 Jun 13 01:22 .
    drwxr-xr-x 18 root root 4.0K Sep 17 23:52 ..
    lrwxrwxrwx 1 root root 3 Jun 4 17:16 images -> wd1
    lrwxrwxrwx 1 root root 3 Jun 4 17:16 multimedia -> wd2
    drwxr-xr-x 23 ognyan users 4.0K Sep 19 14:37 sg1_1
    drwxr-xr-x 1 ognyan users 8.0K Mar 30 21:28 sg2_5
    drwxr-xr-x 1 ognyan users 12K Mar 30 21:28 sg2_6
    lrwxrwxrwx 1 root root 3 Jun 3 21:27 srv -> wd3
    lrwxrwxrwx 1 root root 5 Jun 4 17:15 trunk -> sg1_1
    drwxr-sr-x 203 ognyan users 8.0K Aug 4 20:53 wd1
    drwxr-xr-x 5 root root 41 Sep 19 10:32 wd2
    drwxr-xr-x 8 root root 76 Aug 31 23:13 wd3
    Last edited by bigblondewolf (2013-09-19 22:15:36)

  • 10.2.0.4 Agent startup fails "/libjvm.so, because No such file or directory

    Hi Team,
    10.2.0.4 Agent startup fails with below errors.Customer is having 30 agents in failover on the same system .Issue is happening for his newly installed agents and existing agents also.
    When he stop few agents(like 26th agent and 27th agent... ) and he able to start the agent which is failed to start with below error.Issue looks like lack of some resources to start the agent.
    oracle@sorapx2:/u00/app/oracle/ [AGENTFSP] emctl status agent
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    sh: 28400 Killed
    /usr/lib/hpux32/dld.so: Cannot map text for library</pkg/FSP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/hotspot/libjvm.so>: mmap(0x0, 0xd51870, 0x5, 0x41, 3, 0x0) returns Not enough space.
    oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] emctl start agent
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    sh: 20806 Killed
    Agent is already running
    oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] emctl upload agent
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    sh: 22988 Killed
    /usr/lib/hpux32/dld.so: Cannot map text for library</pkg/FSP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/hotspot/libjvm.so>: mmap(0x0, 0xd51870, 0x5, 0x41, 3, 0x0) returns Not enough space.
    + No issues with space:
    oracle@sorapx2:/pkg/FSP/u00/app/oracle/product/agent10g/ [AGENTFSP] bdf .
    Filesystem kbytes used avail %used Mounted on
    /dev/vgfsp1/lvol1 5144576 1973904 3146008 39% /pkg/FSP/u00
    Agent also gives below error:
    oracle@sorapx2:/u00/app/oracle/emdiag/log/ [AGENTGCP] emctl status agent
    Error: failed to load /pkg/GCP/u00/app/oracle/product/agent10g/jdk/jre/lib/IA64N/server/libjvm.so, because No such file or directory
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    sh: 25923 Killed
    /usr/lib/hpux32/dld.so: Cannot map text for library</pkg/GCP/u00/app/oracle/product/agent10g/lib32/libclntsh.so.10.1>: mmap(0x0, 0x21cded0, 0x5, 0x41, 3, 0x0) returns Not enough space.
    Here emctl agent start command is trying to to load a 32 bit library in stead of the 64 bit.which is causing the issue:
    There are a 32 Bit Library and a 64Bit Library available for the agent
    oracle@vorakx2:/pkg/HYK/u00/app/oracle/product/agent10g/lib/ [HYK]
    file libagtsh.so.1.0
    libagtsh.so.1.0: ELF-64 shared object file - IA64
    oracle@vorakx2:/pkg/HYK/u00/app/oracle/product/agent10g/lib32/ [HYK]
    file libagtsh.so.1.0
    libagtsh.so.1.0: ELF-32 shared object file - IA64
    set below things properly still same problem.:
    export ORACLE_HOME=<path of the agent10g installation>
    export PATH=$ORACLE_HOME/bin:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib
    Please suggest me further
    +what emctl status agent is loading 32 bit library
    +how to resolve the "Not enough space."
    Environment Details:
    10.2.0.4 OMS
    10.2.0.4 Agent
    Operating System HP-UX B.11.31 U (64)
    SR 3-4636880901
    Thanks
    Narendra

    Hi Narendra,
    I just checked the link and it was ok. So maybe try again?
    Copy/past Alain's post:
    Hi,
    -Buf cache is too high: SAM->kernel-> change dbc_pct_max from 50% to 10%.
    -Whith GPM and command "extract" you can find which process consumme too much memory.
    -Install lastest Quality Pack.
    -With 32 bits processes, you can have problem with memory quadrant restriction. <= you have 64 bit so this is not of use to you
    -Check kernel parameter related to max memory used by each process: maxdsiz
    -Verify with swapinfo -tam and GPM -> memory.
    See doc http://docs.hp.com/en/1218/mem_mgt.html
    http://docs.hp.com/en/5580/Misconfigured_Resources.pdf
    Alain.
    Eric

  • [SOLVED]fail to build package: no such file or directory error

    EDIT1: read my last post
    I'm getting an error while installing pacman-color from the aur repository. I'm still a newbie so my only guess is to make such directory? why should I have to do that? anyone help?
    ==> Validating source files with md5sums...
        pacman-3.4.2.tar.gz ... Passed
        pacman-color-3.4.2-1.patch ... Passed
        color.conf ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    /tmp/yaourt-tmp-root/aur-pacman-color/./PKGBUILD: line 21: cd: pacman-3.4.2: No such file or directory
        Aborting...
    ==> ERROR: Makepkg was unable to build pacman-color.
    Last edited by aluser (2011-01-21 04:48:16)

    Here once again a failed attempt after removing pacman-color. I am beginning to think that maybe running yaourt as sudo is probably a bad idea. I think that may have had something to do with it.
    archuser@archws ~ % sudo yaourt -S abiword-light <11:54>
    Password:
    ==> Downloading abiword-light PKGBUILD from AUR...
    x PKGBUILD
    Comment by: mango on Thu, 25 Mar 2010 21:53:12 +0000
    ./configure --prefix=/usr \
    --disable-spell \
    --disable-print
    Comment by: chessboxing on Wed, 19 May 2010 14:33:51 +0000
    doesn't want to build
    rule 23: make: command not found
    == ERROR: Build Failed.
    Aborting...
    Eventhough I Had to install flex psiconv, it didn't help.
    Its a minefield man.
    Comment by: sHyLoCk on Wed, 02 Jun 2010 13:54:43 +0000
    http://aur.archlinux.org/packages.php?ID=37738
    Comment by: zenny on Thu, 02 Sep 2010 05:59:05 +0000
    Quite confusing statements. Below sHyLoCk recommends http://aur.archlinux.org/packages.php?ID=37738 on June 2 2010 and on June 27 he declares his recommended package obsolet and ask a TU to delete! The problem with the sHyLoCk package is there is not page setup option. So I installed this package, it has got the page setup menu, but once I click the option, the application dies with the following output (Maybe helpful to debug for the maintainer, I am not an expert):
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_container_foreach: assertion `GTK_IS_CONTAINER (container)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_get_label: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_markup: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_label_set_text: assertion `GTK_IS_LABEL (label)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_spin_button_set_value: assertion `GTK_IS_SPIN_BUTTON (spin_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): GLib-GObject-WARNING **: invalid (NULL) pointer instance
    (abiword:32455): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_set_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_clear: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_pack_start: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_cell_layout_set_attributes: assertion `GTK_IS_CELL_LAYOUT (cell_layout)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_append: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_list_store_set_valist: assertion `GTK_IS_LIST_STORE (list_store)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_combo_box_get_model: assertion `GTK_IS_COMBO_BOX (combo_box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
    (abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_image_set_from_pixmap: assertion `mask == NULL || GDK_IS_PIXMAP (mask)' failed
    (abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (abiword:32455): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_box_pack: assertion `GTK_IS_BOX (box)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_toggle_button_set_active: assertion `GTK_IS_TOGGLE_BUTTON (toggle_button)' failed
    (abiword:32455): Gtk-CRITICAL **: gtk_widget_get_colormap: assertion `GTK_IS_WIDGET (widget)' failed
    (abiword:32455): Gdk-CRITICAL **: gdk_pixmap_colormap_create_from_xpm_d: assertion `drawable != NULL || colormap != NULL' failed
    Aborted
    First Submitted: Wed, 15 Apr 2009 17:01:46 +0000
    abiword-light 2.8.6-2 : A fully-featured word processor without some gnome dependencies
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> abiword-light dependencies:
    - fribidi>=0.10.9 (already installed)
    - wv>=1.2.4 (already installed)
    - libglade>=2.0 (already installed)
    - pkgconfig (already installed)
    ==> Continue building abiword-light ? [Y/n]
    ==> ---------------------------------------
    ==>
    ==> Building and installing package
    ==> WARNING: Building package as root is dangerous.
    Please run yaourt as a non-privileged user.
    ==> Making package: abiword-light 2.8.6-2 (Fri Jan 21 11:54:35 JST 2011)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Downloading abiword-2.8.6.tar.gz...
    --2011-01-21 11:54:35-- http://www.abisource.com/downloads/abiword/2.8.6/source/abiword-2.8.6.tar.gz
    Resolving www.abisource.com... 130.89.149.216
    Connecting to www.abisource.com|130.89.149.216|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 9218827 (8.8M) [application/x-gzip]
    Saving to: "abiword-2.8.6.tar.gz.part"
    100%[=======================================>] 9,218,827 414K/s in 28s
    2011-01-21 11:55:04 (325 KB/s) - "abiword-2.8.6.tar.gz.part" saved [9218827/9218827]
    ==> Validating source files with md5sums...
    abiword-2.8.6.tar.gz ... Passed
    ==> Extracting Sources...
    ==> Starting build()...
    /tmp/yaourt-tmp-root/aur-abiword-light/./PKGBUILD: line 16: cd: /tmp/yaourt-tmp-root/aur-abiword-light/src/abiword-2.8.6/: No such file or directory
    Aborting...
    ==> ERROR: Makepkg was unable to build abiword-light.
    ==> Restart building abiword-light ? [y/N]
    ==> --------------------------------------
    ==> archuser@archws ~ % <11:find /usr/{bin,lib} -type f -size 0
    /usr/lib/python3.1/tkinter/test/__init__.py
    /usr/lib/python3.1/tkinter/test/test_ttk/__init__.py
    /usr/lib/python3.1/tkinter/test/test_tkinter/__init__.py
    /usr/lib/python3.1/test/nullcert.pem
    /usr/lib/python3.1/site-packages/ranger/gui/__init__.py
    /usr/lib/python3.1/email/mime/__init__.py
    /usr/lib/python3.1/email/test/__init__.py
    /usr/lib/python3.1/urllib/__init__.py
    /usr/lib/python3.1/sqlite3/test/__init__.py
    /usr/lib/python3.1/pydoc_data/__init__.py
    /usr/lib/python3.1/lib2to3/tests/data/fixers/myfixes/__init__.py
    /usr/lib/python2.7/test/nullcert.pem
    /usr/lib/python2.7/site-packages/git_remote_helpers/git/__init__.py
    /usr/lib/python2.7/site-packages/OpenGL/GL/MESAX/__init__.py
    /usr/lib/python2.7/site-packages/OpenGL/GL/VERSION/__init__.py
    /usr/lib/python2.7/site-packages/OpenGL/GLU/EXT/__init__.py
    /usr/lib/python2.7/site-packages/OpenGL/AGL/__init__.py
    /usr/lib/python2.7/site-packages/pychess/__init__.py
    /usr/lib/python2.7/site-packages/pychess/widgets/__init__.py
    /usr/lib/python2.7/site-packages/pychess/Utils/__init__.py
    /usr/lib/python2.7/site-packages/pychess/Utils/lutils/__init__.py
    /usr/lib/python2.7/site-packages/pychess/ic/__init__.py
    /usr/lib/python2.7/site-packages/pychess/ic/managers/__init__.py
    /usr/lib/python2.7/site-packages/pychess/System/__init__.py
    /usr/lib/python2.7/site-packages/pychess/Players/__init__.py
    /usr/lib/python2.7/site-packages/pychess/gfx/__init__.py
    /usr/lib/python2.7/site-packages/xml2po/modes/__init__.py
    /usr/lib/python2.7/site-packages/numpy/distutils/tests/gen_ext/__init__.py
    /usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_ext/__init__.py
    /usr/lib/python2.7/site-packages/numpy/distutils/tests/pyrex_ext/__init__.py
    /usr/lib/python2.7/site-packages/numpy/distutils/tests/swig_ext/__init__.py
    /usr/lib/python2.7/site-packages/numpy/distutils/tests/f2py_f90_ext/__init__.py
    /usr/lib/python2.7/site-packages/bzrlib/util/__init__.py
    /usr/lib/python2.7/site-packages/bzrlib/util/configobj/__init__.py
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/__init__.py
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_LINK_FAILED
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_EXCEPTION
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNPARSEABLE
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_FAILED
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/TESTS_INVALID
    /usr/lib/python2.7/site-packages/pygame/tests/util/build_page/libs/build_client/test_fixtures/BUILD_FAILED_UNKNOWN
    /usr/lib/python2.7/site-packages/pygame/examples/__init__.py
    /usr/lib/python2.7/site-packages/gtk-2.0/egg/__init__.py
    /usr/lib/python2.7/site-packages/gtk-2.0/gi/overrides/__init__.py
    /usr/lib/python2.7/site-packages/sonata/__init__.py
    /usr/lib/python2.7/site-packages/sonata/plugins/__init__.py
    /usr/lib/python2.7/email/mime/__init__.py
    /usr/lib/python2.7/email/test/__init__.py
    /usr/lib/python2.7/sqlite3/test/__init__.py
    /usr/lib/python2.7/pydoc_data/__init__.py
    /usr/lib/python2.7/bsddb/test/__init__.py
    /usr/lib/python2.7/lib-tk/test/test_ttk/__init__.py
    /usr/lib/python2.7/lib-tk/test/test_tkinter/__init__.py
    /usr/lib/python2.7/lib2to3/tests/data/fixers/myfixes/__init__.py
    /usr/lib/purple-2/perl/auto/Purple/Purple.bs
    /usr/lib/perl5/vendor_perl/auto/HTML/Parser/Parser.bs
    /usr/lib/perl5/vendor_perl/auto/XML/Parser/Expat/Expat.bs
    /usr/lib/perl5/vendor_perl/auto/Crypt/SSLeay/SSLeay.bs
    /usr/lib/perl5/vendor_perl/auto/Irssi/Irssi.bs
    /usr/lib/perl5/vendor_perl/auto/Irssi/UI/UI.bs
    /usr/lib/perl5/vendor_perl/auto/Irssi/Irc/Irc.bs
    /usr/lib/perl5/vendor_perl/auto/Irssi/TextUI/TextUI.bs
    /usr/lib/pidgin/perl/auto/Pidgin/Pidgin.bs
    /usr/lib/firefox-3.6/.autoreg
    archuser@archws ~ %
    Last edited by aluser (2011-01-21 03:02:22)

  • [SOLVED] zsh: Failed to execute operation: No such file or directory

    I recently ordered a chromebook (acer c720) and have successfully replaced ChromeOS with Arch Linux. Things were going great the past 2 days but all of a sudden whenever I try to use tab completion on zsh (does not happen in bash or any other shell I've tested) I receive the message:
    Failed to execute operation: No such file or directory
    My .zprofile is:
    emulate sh -c 'source /etc/profile'
    #[[ -f ~/.zshrc ]] && . ~/.zshrc
    if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then
    startx
    fi
    My .zshenv is:
    export PATH=/home/zach/.bin:$PATH
    export EDITOR=nano
    export BROWSER=firefox
    [[ $(tty) = /dev/tty1 ]] && xrdb merge /home/zach/.config/xresources
    My .zshrc is:
    #source ~/.zshenv
    # Lines configured by zsh-newuser-install
    HISTFILE=~/.histfile
    HISTSIZE=100000
    SAVEHIST=100000
    HISTCONTROL=ignoredups
    setopt appendhistory autocd extendedglob nomatch
    bindkey -e
    # End of lines configured by zsh-newuser-install
    # The following lines were added by compinstall
    zstyle :compinstall filename '/home/zach/.zshrc'
    autoload -Uz compinit
    compinit
    # End of lines added by compinstall
    PS1=$'\e[1;36m%~\e[0m >>\e[1;36m>\e[0m%] '
    #Begin Aliases
    alias edit='$EDITOR'
    alias sedit='sudo $EDITOR'
    alias pacman='sudo pacman'
    # Listing
    alias ls='ls --color=auto --group-directories-first'
    alias lsl='ls --color=auto --group-directories-first -l'
    alias lsa='ls --color=auto --group-directories-first -al'
    alias lsp='ls --color=auto --group-directories-first -alp'
    # Moving/Copying
    alias cp='cp -r'
    alias rm='rm -r'
    alias ...='cd ../..'
    alias ....='cd ../../..'
    alias bd='cd -'
    alias mkdir='mkdir -p'
    # System
    alias systemctl='sudo systemctl'
    alias journalctl='sudo journalctl'
    alias cronedit='EDITOR=nano crontab -e'
    alias reload-daemons='sudo systemctl daemon-reload'
    alias enable='sudo systemctl enable'
    alias disable='sudo systemctl disable'
    alias start='sudo systemctl start'
    alias stop='sudo systemctl stop'
    Is there something I'm missing or not considering? The tab completion still works, it just displays that message every time inline and it's really annoying. Also I searched google, the wiki, and the forums for any information regarding this and either my search-fu isn't strong enough or it's not showing up elsewhere.
    Last edited by revoltorb (2014-09-13 14:05:44)

    Rename the "enable" and "disable" aliases. They are zsh hash table operators.

  • Log filling up with kadmind: no such file or directory while initializing

    My log files are being spammed with
    "kadmind; No such file or directory while initializing, aborting"
    followed by edu.mit.kadmind exiting and respawning and then 4x:
    "krb5kdc: cannot initialize realm My-FQDM.NET - see log file for details"
    Not surprisingly, Kerberos logins do not work, for instance from iCal I get:
    "Cannot contact any KDC for requested realm"
    This is a brand new iMac with a brand new install of OS X Leopard, using "Standard" configuration. I'm a complete network admin newb and acknowledge that; I could really use some help getting Kerberos working, and failing that, getting it to stop respawning and spamming the error logs.
    Edit: Sorry, wrong forum, reposted here:
    http://discussions.apple.com/thread.jspa?threadID=1934679&tstart=0
    Message was edited by: Derek Jones3

    Hm, I definitely have a reverse PTR. But there's also definitely a problem with Kerberos. In the Directory, I click Edit for a user and get a GSSAPI Error (cannot find ticket for requested realm) followed by a "if you haven't dismissed the Kerberos authentication dialog by clicking 'Cancel', chances are there is a problem with Kerberos." Interestingly, there's never a dialog presented to me.
    In case it's relevant, as mentioned, this is a new iMac. It will not boot from the OS X Server Install DVD - I have to start out with the client version of OS X and run the installer from the disc, and then reboot sans install DVD. If I try to boot from the DVD it restarts over and over again. Enterprise support said this is "normal" since the install DVD comes with 10.5.4 - it won't boot from a machine that came with 10.5.6 client.
    Is it possible that something that the client version does with Kerberos (standalone machine?) doesn't get corrected in the Server install, preventing it from working? I'm postulizing this theory as I see in my error log shortly after boot:
    com.apple.KerberosAutoConfig[3244] Couldn't find KerberosClient config record

  • Issue with adadmin No such file or directory

    Hi, I was trying to apply patch 9239089 and got issues related to adrelink. After going through the forums, I tried few things and now adadmin is not working.. Please help.
    When I issue adadmin command all it gives is "sh: /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadminnew: No such file or directory"
    adpatch command is still working.

    Sorry. I missed that.. It is 12.1.1, Oracle Linux 6. I think database version is 10.1.2
    Here is the adrelink.log
    You are running adrelink, version 120.43.12010000.6
    Start of adrelink session
    Date/time is  Wed Jan 8 19:19:07 PST 2014
    Log file is  /home/oracle/ebs/apps/apps_st/appl/admin/VIS/log/adrelink.log
    Command line arguments are
       "force=n" "ranlib=n" "link_debug=n"
    "filelist=/home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/plkapp000.txt"
    Operating System Information (output of 'uname -a'):
    Linux ebs.amineni.com 2.6.32-300.3.1.el6uek.i686 #1 SMP Fri Dec 9 18:39:00
    EST 2011 i686 i686 i386 GNU/Linux
    Backup Mode is "file"
    Removing extra variables from the environment...
      adrelink will save the following variables (if set):
       - Generic:
    "PATH ORACLE_HOME TMPDIR TZ APPL_TOP APPLFENV PLATFORM LD_LIBRARY_PATH COBDIR
    LIBPATH NLS_LANG JAVA_TOP PERL5LIB"
       - Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
      Beginning pass 1.
       Processing 369 environment variables...
         357 removed; 12 saved.
      Beginning pass 2.
       Processing 12 environment variables...
         0 removed; 12 saved.
    Done removing extra environment variables.
    Removing Application products' bin directories from PATH ...
    Done removing Application products' bin directories from PATH
    Reading Oracle Applications environment file
    Your Oracle Applications environment file is
    /home/oracle/ebs/apps/apps_st/appl/VIS_ebs.env
    Removing $FND_TOP/$APPLBIN from PATH ...
    Done removing $FND_TOP/$APPLBIN from PATH
    Removing extra variables from the environment (again)...
      adrelink will save the following variables (if set):
       - Generic:
    "PATH ORACLE_HOME TMPDIR TZ LD_LIBRARY_PATH COBDIR LIBPATH NLS_LANG JAVA_TOP
    PERL5LIB"
       - Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
      Beginning pass 1.
       Processing 340 environment variables...
         331 removed; 9 saved.
      Beginning pass 2.
       Processing 9 environment variables...
         0 removed; 9 saved.
    Done removing extra environment variables (again).
    Re-reading critical environment variables ...
    Done re-reading critical environment variables
    ORACLE RDBMS   Version 10.1.0.5.0
    Oracle Reports Version 10.1.2
    Oracle Applications Release 12
    Current product is  AD
    LADLIB  is set to /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    Current product is  ALR
    LALRLIB  is set to /home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/libalr.a
    Current product is  AP
    LAPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/ap/12.0.0/lib/libap.a
    Current product is  AR
    LARLIB  is set to /home/oracle/ebs/apps/apps_st/appl/ar/12.0.0/lib/libar.a
    LARSRW  is set to /home/oracle/ebs/apps/apps_st/appl/ar/12.0.0/lib/xirar.o
    $(LARLIB)
    Current product is  BOM
    LBOMLIB  is set to /home/oracle/ebs/apps/apps_st/appl/bom/12.0.0/lib/libbom.a
    Current product is  CRP
    LCRPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a
    Current product is  CZ
    LCZLIB  is set to /home/oracle/ebs/apps/apps_st/appl/cz/12.0.0/lib/libcz.a
    Current product is  DT
    LDTLIB  is set to /home/oracle/ebs/apps/apps_st/appl/dt/12.0.0/lib/libdt.a
    Current product is  ENG
    LENGLIB  is set to /home/oracle/ebs/apps/apps_st/appl/eng/12.0.0/lib/libeng.a
    Current product is  FA
    LFALIB  is set to /home/oracle/ebs/apps/apps_st/appl/fa/12.0.0/lib/libfa.a
    LFASRW  is set to /home/oracle/ebs/apps/apps_st/appl/fa/12.0.0/lib/xirfa.o
    $(LFALIB)
    Current product is  FEM
    LFEMLIB  is set to /home/oracle/ebs/apps/apps_st/appl/fem/12.0.0/lib/libfem.a
    Current product is  FF
    LFFLIB  is set to /home/oracle/ebs/apps/apps_st/appl/ff/12.0.0/lib/libff.a
    Current product is  FND
    LFNDLIB  is set to /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a
    LFNDSRW  is set to /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/xirfnd.o
    $(LFNDLIB)
    Current product is  FTP
    LFTPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/ftp/12.0.0/lib/libftp.a
    Current product is  GL
    LGLLIB  is set to /home/oracle/ebs/apps/apps_st/appl/gl/12.0.0/lib/libgl.a
    Current product is  GMA
    LGMALIB  is set to /home/oracle/ebs/apps/apps_st/appl/gma/12.0.0/lib/libgma.a
    Current product is  GMF
    LGMFLIB  is set to /home/oracle/ebs/apps/apps_st/appl/gmf/12.0.0/lib/libgmf.a
    Current product is  GML
    LGMLLIB  is set to /home/oracle/ebs/apps/apps_st/appl/gml/12.0.0/lib/libgml.a
    Current product is  IBY
    LIBYLIB  is set to /home/oracle/ebs/apps/apps_st/appl/iby/12.0.0/lib/libiby.a
    Current product is  INV
    LINVLIB  is set to /home/oracle/ebs/apps/apps_st/appl/inv/12.0.0/lib/libinv.a
    Current product is  MRP
    LMRPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a
    Current product is  MSC
    LMSCLIB  is set to /home/oracle/ebs/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a
    Current product is  MSO
    LMSOLIB  is set to /home/oracle/ebs/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
    Current product is  MSR
    LMSRLIB  is set to /home/oracle/ebs/apps/apps_st/appl/msr/12.0.0/lib/libmsr.a
    Current product is  MST
    LMSTLIB  is set to /home/oracle/ebs/apps/apps_st/appl/mst/12.0.0/lib/libmst.a
    Current product is  MWA
    LMWALIB  is set to /home/oracle/ebs/apps/apps_st/appl/mwa/12.0.0/lib/libmwa.a
    Current product is  PA
    LPALIB  is set to /home/oracle/ebs/apps/apps_st/appl/pa/12.0.0/lib/libpa.a
    Current product is  PAY
    LPAYLIB  is set to /home/oracle/ebs/apps/apps_st/appl/pay/12.0.0/lib/libpay.a
    Current product is  PO
    LPOLIB  is set to /home/oracle/ebs/apps/apps_st/appl/po/12.0.0/lib/libpo.a
    LPOSRW  is set to /home/oracle/ebs/apps/apps_st/appl/po/12.0.0/lib/xirpo.o
    $(LPOLIB)
    Current product is  PON
    LPONLIB  is set to /home/oracle/ebs/apps/apps_st/appl/pon/12.0.0/lib/libpon.a
    Current product is  RG
    LRGLIB  is set to /home/oracle/ebs/apps/apps_st/appl/rg/12.0.0/lib/librg.a
    Current product is  WIP
    LWIPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/wip/12.0.0/lib/libwip.a
    Current product is  WPS
    LWPSLIB  is set to /home/oracle/ebs/apps/apps_st/appl/wps/12.0.0/lib/libwps.a
    Current product is  WSM
    LWSMLIB  is set to /home/oracle/ebs/apps/apps_st/appl/wsm/12.0.0/lib/libwsm.a
    Current product is  XDP
    LXDPLIB  is set to /home/oracle/ebs/apps/apps_st/appl/xdp/12.0.0/lib/libxdp.a
    LUSRLIB is /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/usrxit/libusr.a
    Not linking Oracle Applications with any Oracle mail product
    LALRSTUB is now set to
    /home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
    MAILLNK  is now set to
    /home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
    Creating prefix makefiles ...
    Done creating prefix makefiles
    The file /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/plkapp000.txt
    contains:
    ad bin adadmin
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin
    ad bin adadmin_wrapper
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper
    ad bin adaimgr
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr
    ad bin adchkdig
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
    ad bin adctrl
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl
    ad bin adctrl_wrapper
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper
    ad bin addefgen
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen
    ad bin addmimp
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
    ad bin adgenhnm
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm
    ad bin adgetreg
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg
    ad bin adident
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
    ad bin adjava
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
    ad bin adjkey
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
    ad bin admrgpch
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
    ad bin adncnv
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
    ad bin adodfcmp
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
    ad bin adpchnew
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
    ad bin adpatch_wrapper
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper
    ad bin adprmkey
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adprmkey
    ad bin adpwmask
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpwmask
    ad bin adregenv
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adregenv
    ad bin adsplice
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsplice
    ad bin adsplice_wrapper
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsplice_wrapper
    ad bin adsstart
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsstart
    ad bin adurs /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adurs
    ad bin adwait
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adwait
    ad bin adwrknew
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adwrknew
    Starting  link of product 'ad' on Wed Jan  8 19:19:27 PST 2014
    Current product is  ad
    Current product _TOP is  $AD_TOP
    Current prodarea is  /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0
    Relinking module 'adadmin' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15332.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin
    Starting  link of ad executable 'adadmin' on Wed Jan  8 19:19:27 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl  -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin.new \
                    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adadmin.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadminnew] Error
    1
    Done with link of ad executable 'adadmin' on Wed Jan  8 19:19:29 PST 2014
    Relink of module "adadmin" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adadmin_wrapper' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15361.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper
    Starting  link of ad executable 'adadmin_wrapper' on Wed Jan  8 19:19:29 PST
    2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper.new \
            /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adadmin_main.o
    -lsql10 -lclntsh  `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper]
    Error 1
    Done with link of ad executable 'adadmin_wrapper' on Wed Jan  8 19:19:29 PST
    2014
    Relink of module "adadmin_wrapper" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adaimgr' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15383.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr
    Starting  link of ad executable 'adaimgr' on Wed Jan  8 19:19:29 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl  -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr.new
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aimain.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr] Error 1
    Done with link of ad executable 'adaimgr' on Wed Jan  8 19:19:30 PST 2014
    Relink of module "adaimgr" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adchkdig' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15405.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
    Starting  link of ad executable 'adchkdig' on Wed Jan  8 19:19:30 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adchkdig.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig] Error 1
    Done with link of ad executable 'adchkdig' on Wed Jan  8 19:19:31 PST 2014
    Relink of module "adchkdig" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adctrl' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15427.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl
    Starting  link of ad executable 'adctrl' on Wed Jan  8 19:19:31 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl.new \
                    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aictrl.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrlnew] Error 1
    Done with link of ad executable 'adctrl' on Wed Jan  8 19:19:31 PST 2014
    Relink of module "adctrl" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adctrl_wrapper' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15449.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper
    Starting  link of ad executable 'adctrl_wrapper' on Wed Jan  8 19:19:31 PST
    2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper.new \
            /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adctrl_main.o
    -lsql10 -lclntsh  `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper]
    Error 1
    Done with link of ad executable 'adctrl_wrapper' on Wed Jan  8 19:19:32 PST
    2014
    Relink of module "adctrl_wrapper" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'addefgen' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15471.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen
    Starting  link of ad executable 'addefgen' on Wed Jan  8 19:19:32 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/addefgen.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen] Error 1
    Done with link of ad executable 'addefgen' on Wed Jan  8 19:19:32 PST 2014
    Relink of module "addefgen" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'addmimp' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15493.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
    Starting  link of ad executable 'addmimp' on Wed Jan  8 19:19:32 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/dmmmain.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp] Error 1
    Done with link of ad executable 'addmimp' on Wed Jan  8 19:19:33 PST 2014
    Relink of module "addmimp" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adgenhnm' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15516.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm
    Starting  link of ad executable 'adgenhnm' on Wed Jan  8 19:19:33 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adgenhomenum.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm] Error 1
    Done with link of ad executable 'adgenhnm' on Wed Jan  8 19:19:33 PST 2014
    Relink of module "adgenhnm" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adgetreg' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15539.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg
    Starting  link of ad executable 'adgetreg' on Wed Jan  8 19:19:33 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adgetregvalue.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg] Error 1
    Done with link of ad executable 'adgetreg' on Wed Jan  8 19:19:33 PST 2014
    Relink of module "adgetreg" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adident' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15561.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
    Starting  link of ad executable 'adident' on Wed Jan  8 19:19:34 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adident.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident] Error 1
    Done with link of ad executable 'adident' on Wed Jan  8 19:19:34 PST 2014
    Relink of module "adident" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adjava' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15583.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
    Starting  link of ad executable 'adjava' on Wed Jan  8 19:19:34 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adjava.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava] Error 1
    Done with link of ad executable 'adjava' on Wed Jan  8 19:19:35 PST 2014
    Relink of module "adjava" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adjkey' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15605.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
    Starting  link of ad executable 'adjkey' on Wed Jan  8 19:19:35 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adjkey.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey] Error 1
    Done with link of ad executable 'adjkey' on Wed Jan  8 19:19:35 PST 2014
    Relink of module "adjkey" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'admrgpch' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15627.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
    Starting  link of ad executable 'admrgpch' on Wed Jan  8 19:19:35 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/admpch.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch] Error 1
    Done with link of ad executable 'admrgpch' on Wed Jan  8 19:19:36 PST 2014
    Relink of module "admrgpch" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adncnv' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15649.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
    Starting  link of ad executable 'adncnv' on Wed Jan  8 19:19:36 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adncnv.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv] Error 1
    Done with link of ad executable 'adncnv' on Wed Jan  8 19:19:36 PST 2014
    Relink of module "adncnv" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adodfcmp' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15671.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
    Starting  link of ad executable 'adodfcmp' on Wed Jan  8 19:19:37 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aicodf.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp] Error 1
    Done with link of ad executable 'adodfcmp' on Wed Jan  8 19:19:37 PST 2014
    Relink of module "adodfcmp" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adpatch_wrapper' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15693.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper
    Starting  link of ad executable 'adpatch_wrapper' on Wed Jan  8 19:19:37 PST
    2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper.new \
            /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adpatch_main.o
    -lsql10 -lclntsh  `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper]
    Error 1
    Done with link of ad executable 'adpatch_wrapper' on Wed Jan  8 19:19:38 PST
    2014
    Relink of module "adpatch_wrapper" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adpchnew' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15717.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
    Starting  link of ad executable 'adpchnew' on Wed Jan  8 19:19:38 PST 2014
    gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
    -L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl  -o
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adpmain.o
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrbind.o
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrdump.o 
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrutl.o
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrcfd.o  
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrfs.o
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrval.o  
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrad.o
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrdl.o   
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrul.o \
      /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
    /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh 
    `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10
    -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10 -lmm  -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
    -lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`   
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10
    -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10  -lvsn10
    -lcommon10 -lgeneric10    -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
    -lnls10 -lclient10 -lnnetd10  -lvsn10 -lcommon10 -lgeneric10  -lcore10
    -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat
    /home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm  -lpthread
    /usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
    `__stack_chk_fail@GLIBC_2.4'
    collect2: ld returned 1 exit status
    make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew] Error 1
    Done with link of ad executable 'adpchnew' on Wed Jan  8 19:19:38 PST 2014
    Relink of module "adpchnew" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure.  Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Relinking module 'adprmkey' in product ad ...
    make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15740.mk
    /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adprmkey
    Starting  link of ad executable 'adprmkey' on Wed Jan  8 19:19:3

  • Disk Imag Failed to mount Reason: No such file or directory

    Hello,
    I've been trying to download firefox and msn messenger for my mac!
    Everytime i try to launch the .dmg it says 'Failed to mount' and the 'reason' is 'No such file or directory'
    This happens with everything i download!
    I dn't know what to do!
    I've searched it, found some soloutions but nothing works!
    Thanks Steve

    I've had this happen before, if I remember correctly it's just because of a corrupt download. Try downloading the .dmg files again and they should work. The other problem is it may be a permissions error. Where are the files located that you're trying to mount? Try putting them in your home directory. My first guess would be a corrupt download though.
    I was suprised to find no information in the support database, or on google for this erorr with disk images.
    Hope this helps.

Maybe you are looking for

  • HT5637 How do I download from iTunes Match to an iPad

    I have subscribed to iTunes Match and would like to download the music to an iPad in apple lossless format. I can download but don't know how to select the quality.

  • Photoshop "Unable to continue because of a hardware or system error.

    Originally installed adobe photoshop cs. This couldn't be activated and support was contact they advised to uninstall and install adobe photoshop cs2 with a serial  number provided that was provided with the link. CS couldn't be uninstalled due to th

  • Agent detail report shows calls outside the time range

    Hi all, I have an UCCX 7.0 SR5 call center. My problem is that the agent detail report is showing calls outside the defined time range on the historical reporting client. Those calls start slightly after the end time difined in the HR client. Is ther

  • DevNet Studio 8 Not Allowed for CS3 Upgrade

    I wanted to give a heads-up to all those that paid for Macromedia Studio 8 through their DevNet subscription. Adobe is not accommodating these paying customers in any upgrade path to CS3 Web or Web Premium. I just spent 47 minutes on the phone with c

  • Using UNIX DD to recover data on damaged drive

    My internal drive failed. I attempted to recover the data using Prosoft's Data Rescue II, but the program repeatedly crashed while trying to scan the drive. No love from Techtools, either. I tried creating a disk image with Disk Utility, but got an I