RPRAPR00 and Central Adress Management

Hi Experts,
Is there a step by step explanation on how to create Vendors out of employees in SAP HR? I try to use RPRAPA00, but because Central Adress Management is active, I get an error in the Batch Input on the adress. Street and house number are two seperate fields on the CAM screen, the Batch Input program concatenated the two fields into one.
Hope you can help!
Marco

solved

Similar Messages

Creating Vendors (RPRAPA00) and Central Adress Management

Hi Experts,
Is there a step by step explanation on how to create Vendors out of employees in SAP HR? I try to use RPRAPA00, but because Central Adress Management is active, I get an error in the Batch Input on the adress. Street and house number are two seperate fields on the CAM screen, the Batch Input program concatenated the two fields into one.
Hope you can help!
Marco

Solved by creating a Z-version of the program

PRAA in combination with central address management

Hello,
In our system we have central adress management activated. All the
personell nrs are entered with the correct address (sreetname and
housenumber in 2 separate fields). We use this information to create
the corresponding vendor numbers in FI (transaction PRAA).
However, with transaction PRAA both the address (streetname and
housenumber) are copied into one field (streetname). As a consequence,
the corresponding batch input session, which is using program SAPMF02K,
cannot automatically (in bcakground) create all the vendors, since we
always get a message about central address management. (Streetname does
not exist, because it wrongly contains both the streetname as well as
the housnumber.)
The field USE_ZAV which is automatically ENTERED in the background
processing of the SAPMF02K batch job, is causing this address check.
We think this is a bug.
Ideally the PRAA should be entering the streetname and housnumber in 2
separate fields in FI-vendor master data, of the automatic check of
field USE_ZAV should not be entered in this batch input background
processing.
Can you please give us some advice on how to deal with this situation?
Kind regards
Karinne Van Goethem
SAP Consultant - Holland Casino

XXX

Central Contract Management in case of Classic Scenario

Hi,
At our current implementation, requirement is to implement both Service procurement(with hierarchy) and Central Conract Management. I was exploring the possibility of utilizing Central Contract Management with Classic scenario.
Will the Central Contracts created in this fashion be available in Sourcing Cockpit for the buyer to select against Purchase Requisitions? Will the Central Contract be visible at all in SRM in this case ?
Please respond only with reference to Classic scenario.
Thanks,
Abhilash

Yes the Central Contract will be available in the Sourcing Cockpit, both local and classic scenario's. Yes the Central Contracts will be available for the creation of Purchase Requisitions in R/3 and to assign SOS in R/3.
Do know that for SRM 7.0 PI is required for setting up Central Contracts. This is promised to change with the release of EHP1 for SRM (due june 2010).
Kind regards,
Tim

Solman_setup and central&local solution manager SLD

Hello,
I'm configuring our solution mananger system with transaction solman_setup. The local SLD of the solution manager will also be the central SLD of all our systems. After finishg the basic configuration in solman_setup, and go to "managed system configuration", I can only see the only solution manager system, as ABAP and as JAVA, but no more systems (right, as I haven't defined more systems).
I cannot create more ABAP system with the link "maintain technical systems", the ABAP option when I select create isn't there.
If I create another type of system as a test, for example, third party, the transaction SMSY can see this new system, but the SLD in http://<my_solution_manager_system>:50000/sld doesn't show this new system at all.
Where must I create the systems? and how can I connect the SLD and the SMSY transaction? Should I "add SLD" at the Administration in http://<my_solution_manager_system>:50000/sld and put the suolution manager itsefl system?
Thanks in advance for your help and best regards,
Ana

Hi,
To ensure a system is registering into the SLD and synchronising with SMSY, go to transaction RZ70 and define the Host and Service.
Also, set up a user for accessing the SLD in transaction SLDAPICUST. The user has to exist in the Java stack to log into the SLD.
Also ensure your RFCs are correctly set up for LCRSAPRFC and SAPSLDAPI as per this link:
https://cw.sdn.sap.com/cw/docs/DOC-37953?treeid=DOC-7936
Then use transaction SLDCHECK to ensure your connection is working.
Finally enable SLD synchronisation into SMSY by transaction SMSY > Goto > Setup System Landscape Maintenance. Define the same host and port of your SLD and schedule the data transfer.
This should pick up the system once the landscape_fetch background job executes into SMSY.
You can use this approach for all your managed systems and is the most logical way to connect systems to the SLD.
Regards,
-Rohan

Error-IM258-This refers to an error in central status management.

Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 11:10 AM
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 2:28 PM

Dear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar

Using central Solution Manager for monitoring multiple customers

Hello,
We are working on monitoring SAP systems of several customers. For every customer we have configured central monitoring on Solution Manager system of that customer. All satellite systems are added to RZ21 and CCMS agents are configured correctly. On the Solution Manager, in RZ20 we have created a rule based monitor specific to the needs of customer, and that monitor is used for the whole landscape of every customer.
But now I need to configure our central Solution Manager system which will collect CCMS data from all satellite systems of all customers on one place in RZ20. That central Solution Manager system should have direct connection only to customer Solution Manager systems and not to their satellite systems. Is this possible? If yes, can you please explain me how to do it or point me to documentation? I was unable to find solution.
To make this more clear I made a picture of desired configuration:
https://picasaweb.google.com/108686894540363563900/SAP#slideshow/5571983242527848482
Edited by: Dejan Terzic on Feb 10, 2011 10:04 AM

Hi Dejan,
as far as I know this is not possible.
we had similar issues, every time we migrated a new customer to or datacenter. Our solution was, to register the CCMS agents to two systems for a period of migration.
Sometime ago, I found a question for that an SDN:
Using another CEN for Solution Manager
I know, that this is not your question exactly, but it is the right direction...
Kind regards

Multi-Site WAN With Centralized Call Manager

The customer has HQ with 15 Branches. Head quarter has about 4300 Phones, and Branches has:
Branch 1 = 420
Branch 2 = 256
Branch 3 = 385
Brnach 4 = 298
Branch 5 = 262
Branch 6 = 171
Branch 7 = 200
Branch 8 = 97
Branch 9 = 198
Branch 10 = 254
Branch 11 = 269
Branch 12 = 224
Branch 13 = 90
I would still like to propose Centralized Call Manager Cluster with SRST, but little confused since the number of phones per branch is very high.
What would be best deployment model for this type of scenerio along with VoiceMail and CER.

Of course you can use CME/CUE, but the problem is that you need 3845 for SRST with CME/CUE, which cost a lot of money CISCO3845-CCME/K9 is $16495 plus CUE ($3000, not include voice mail subscriber box).
So I will agree what people suggest here.
I have centralized design (Publisher, subscriber) at Main Location, and another subscriber at remote site coz 500 users. I chose put subscriber there rather than use 3845 with SRST.
They share voice box at Main site (Unified).
The rest of remote site use SRST for backup.
Large remote site with T1 PRI with SRST if WAN down.
Small remote site with vic2-2fxo/4fxo with SRST if WAN down.
You can read the SRND here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_book09186a00806e8a79.html
Also, you can design multiple cluster depends the location of main and branches. For example, half office located at West Coast, another half at East Coast. If I were you, I will create two clusters.
Again, it depends a lot of things, for example bandwidth, round-trip delay etc...
Hopefully, thats can help you.
Ken

Difference between Consolidation, Harmonization and Central master data man

Hi ..Expertise
Consolidation is use to identify duplicate records and merge them into one record.
Harmonization is the process of pushing the new cleansed data back out to your partner systems.
Central master data management means you create records within MDM and then you distribute (Syndicate) this centrally created data to your Remote Systems.
My Question is her after Consolidation both Harmonization and Central master data management is doing the same thing i.e. sending the clean data to the other system. What is the difference between these two? Please explain me with an example or scenario..

Hi Yugandhar,
There are three basic scenarios that we follow in MDM:
Data Consolidation
Data Harmonization
Central Master Data Management
Consolidation :
Conolidation (matching , normalization, cleansing) and storage of master data imported from client system. Entails capabilities to identify identical and similar objects spread across the local systems , build consolidated master data.
Key Capabilities:
1. Cleansing and de-duplication
2. Data normalization including categorization and taxonomy management
3. New interactive consolidation capabilities
Data Harmonization :
In case of Harmonization we generally aim at reaching high quality master data within heterogeneous system landscapes. Here the main focus is on ensuring high quality of master data within the connected systems and then distributing the Master data
Key Capabilities:
1. Automated synchronization of globally relevant master data information
2. New Interactive distribution capabilities
Central Master Data Management :
In case of CMDM, it is not always the scenario that the Client wants to go for the above two scenario`s, but CMDM is always required as it helps us to maintain the Business data effectively and efficiently.
After MDM is put into the business scenario all the operations related to the Master records are done in MDM only. For Eg: Creating a record, Deleting a record, Distributing a record etc.
Now it is the work of CMDM to centrally maintain the data and check that no duplicate enteries can be created.
And all the various systems that are attached to MDM gets the updates from CMDM with the help of Syndication Process or Distribution Process.
Key Capabilities:
1. Central creation and maintenance of data
2. Ongoing master data quality
Hope this would be helpful !!!!!!!!!
Regards,
Parul

CRM - IS-M Central Address Management

Hi Guys,
Can we integrate CRM (7.0) with IS-M Central Address Management.
In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code.
CRM can download standard ERP Regional Structure (Address Management), but I'm not sure if and what type of integration we can have with Media Central Address Management.
Any inputs are welcomed.
Best regards,
Renato Petrulis

Close since no answer for so long.

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

Central Contract Management

Dear SAP Experts,
I have a few questions regarding our implementation of SRM and ECC.
FYI, we are planning to use SRM 7.01 and ECC 6.05 as backend.
We’re planning to utilize Central Contract Management functionality in SRM, where we negotiate the price in SRM then we distribute the contract to ECC. In ECC we create PR, which have reference to this contract (contract number in SRM is different with ECC). So this PR will have assigned source of supply, is it possible for us then to create PO automatically from tcode ME59? The reason we ask this because we see in documentation that every PO in ECC created with reference to contact in SRM, ECC will need to check first the current price in the SRM contract, so we would like to confirm whether it is working if we use ME59 (we plan to use ME59 as background job and unfortunately we don’t have the testing system yet to verify this).
We’re planning to have PR created in ECC. However we would like to utilize MDM catalog as well. Is it possible that during PR creation we can select items from the catalog?
We’re planning to have implement SRM 7.01 in 2 waves. In first wave we will only use Self Service Procurement and Strategic Sourcing (using classic deployment where the leading PO is in ECC). However in the second wave, we’re planning to implement SUS (Supplier Collaboration). In SUS, we would like to activate the business function, so the vendor will response RFx and participate in auction from SUS itself. The question is…is it possible for us to have it planned like this? For example, in first wave, the RFx and auction will use SRM server itself, however in the second wave, we will switch it to SUS. Our concern is that the switch will happen to the productive server already. Is this okay?
Thanks
Varian

Hi,
When you distribute the central contract to ECC system, it creates a new contract in ECC system.
When you create PR, you can assign this contract as source of supply.
Then automatic PO creation if your settings for automatic PO is maintained.
In ECC 6.04 also catalog integration is possible. So for your version 6.05 there is absolutely no problem. The same OCI interface parameters have to be maintained in MM system for catalog.
Your two stage implementation is absolutely possible.
With Regards,
Malay

OSM - Central Order Managment - Service Order Managment

Hi!
I'm studing OSM. Now, I have a problem. How the request Order passes from COM (Central Order Managment) to the SOM (Service Order Managment) ?
Thanks

Hi !
I'm studing OSM too, I have been reading documentation and I Understand that COM and SOM are booth in a Single Orchestration process that can be designed in
"Design Studio" as a plug in of the Eclipse Plataform, when you talk about "how the request Order passes from COM to SOM" I asume that you understand the
process to get the income message that comes from a external system as a file .XSD and then the Orchestration process have to convert that file in a XML that understand the OSM, then the OSM have to map each products or items or services into a fulfillment plan that specifies how to fulfill that products or services or orders, and all of this components are entities that you have to define in the Orchestration process and that entities or components are in the Environmet of the Design Studio, some of this components are: "Orchestation Sequence" , "Order Item Specification", "Product Class", "Fulfillment Mode" , "Orchestration Stages" , "Order Recognition Rules", "Process", "Descomposition Rules" , "Automated or manual Tasks", "Data Dictionary".
For more information about Concepts read "Order and Service Management 7.0.2 Documentation" in this documentation you can find the next topics:
Communications Order and Service Management Concepts:
3 Order Request Processing
About Receiving Orders
Understanding Order Input and Request Processing
Understanding Order Recognition
Defining Recognition Rules in Design Studio
Recognition Rule Errors
Understanding Order Validation
Understanding Order Transformation
Understanding Order Creation
4 Orchestration Orders
Understanding Orchestration Plans
Understanding Orchestration Models
Understanding Decomposition Rules
Understanding Fulfillment Modes
Understanding Orchestration Stages, Sequences, and Processes
Modeling Orchestration Stages in Design Studio
Modeling Orchestration Sequences in Design Studio
Viewing Decomposition and Dependencies Graphically
About Creating a Cartridge for Orchestration Orders
Understanding Order Items and Order Components
Understanding Order Component Control Data
About Modeling Order Items in Design Studio
About Modeling Order Components in Design Studio
Understanding Dependencies
About Compensating Dependencies in Orchestration Plans
About Modeling Dependencies in Design Studio
Understanding Product Specifications
About Importing Product Classes in Design Studio
About Creating Product Specifications in Design Studio
About Defining Order Components in Product Specifications
You can fin this documentation at: https://edelivery.oracle.com
Regards.
Lucas.

Error by opening the Central configuration manager

Hi Gurus,
i have a problem with my system.
I installed Enteprise XI 3.0, Crystal, CR, Xcelsius.
By trying to install Live office i receive an error.
I open the Central configuration manager and received this:" The procedure entry pint? Can stack Dump@SLogger@CXLib400@SA_NXZ could not be located in the dynamic link library CXLIBW-4-0.dll"
I can´t start nor stop in CCM.
Do you have any solution?
Thank you for your input.
Pat

Hello Gilo,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Cut position and central person

Hi,
I have the following problem. I develop an entering interface in order to manage the rights users, a user can be entitled to certain catalogues.
I would like to log the validity dates of positions and central persons, i.e a user between 01.01.2006 and 31.07.2006 has some attributes, is attached to this organizational unit, and between 01.08.2006 to 31.12.9999 he has others attributes under an other unit.
How I could make?
Thanks a lot
David WACHE
[email protected]

Hi
HR_CENTRALPERSON_DELETE is working fine.
Can you tell me how to delete position from Org unit. I want to delete it using FM or program.
How to execute this program BUPA_TEST_DELETE?
I gave Business partner as input, but it does not delete...anything. pls guide how to exeute.
Any FM available.
Regards
Chandra

RPRAPR00 and Central Adress Management

Similar Messages

Maybe you are looking for