RPT_MOPZ_COPY_STACK_XML shows SC version differs for JAVA and DUAL-Stack xml files

Hi All,
I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. Systems are identical. However, report shows below..
"Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
and
Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
Please help check how to resolve the issue.
SAP notes mentioned in below KBA were already obsolete. Solution Manager system just upgraded to 7.1 SP11.
1711612 - RPT_MOPZ_COPY_STACK_XML Report Troubleshooting.
We would appreciate your response for us to resolve this issue. Thanks.
Regards,
Philip

Hi Jansi, Divyanshu,
Both system have the same patch levels.
Here the situation, SYS1 is where we generated the stack xml file. Afterwards, used that stack file to upgrade SYS1.
Now we built SYS2, ensuring it has the same components version with the un-upgraded version of SYS1, so yes they have same patch number for same components, for this issue, kernel and jvm.
Thus, instead of running MOPZ for SYS2, we used RPT_MOPZ_COPY_STACK_XML to convert the stack file of SYS1 to be used for SYS2.
This is where we encountered below messages, when performing the copy.
"Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
and
Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
We previously used SOLMAN 7.0 SP23, and the report is working fine there. Then recently, solman was upgraded to 7.1 SP11, and now the report is not working with the above issue.
We would appreciate if you could share actions on how we can fix the issue.
Regards,
Philip

Similar Messages

  • RPT_MOPZ_COPY_STACK_XML shows SC version differs

    Hi All,
    I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. System is identical. However, report shows "Software Component Version MDM_CONNECTOR710.711[01200615320200018572] differs between <System1> and <System2>".
    However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
    Please refer to screenshots below.
    Could anyone advise to resolve this or any workaround? Thanks.
    Regards,
    Philip

    Hello,
    Are you sure that the versions are the same?
    If the MDM CONNECTOR 710.711 differs in Support Package level or patch level, the check will be wrong. What is the complete entry in LMDB or SMSY for this software component in the two systems?
    Best regards,
    Miguel Ariño

  • Is this a good way for loading and handling an xml file?

    I'm new to xml files, but it seems to me that a good way to handle them may be this:
    - create an xmltype table with a unique xmltype column
    - load the xml file in the xmltype column of the table
    - writing a procedure for scanning the whole column of the table by using the extractvalue built-in function for inserting the different nodes of the xml file (just loaded) in the final tables (to link correctly the father and son tags with foreign keys)
    Does it seem to you a good way to load the nodes of a xml file in a relation database?
    Thanks!

    Is this the 10gR2 Express Edition you mentioned over in How to load a XML file into a table or a different version?

  • USB sync cable different for CDMA and GSM version phones?

    I recently ordered a USB sync cable for Iphone 4S from ebay. I want to know whether the USB sync cable for Iphone 4S is different for CDMA and GSM version phones? And if they are then what are the likely consequences if they are interchanged and used inadvertantly.

    All recent iDevices use the same type of connector/cable.
    Stedman

  • SMSY for ERP JAVA and ABAP Stack

    Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
    I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
    I am using Somlam 7.1 on Oracle Linux system.
    ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
    J12 and T12 systems are connected via JCO.
    SLD has been defined for both stacks and they are using the local SLD for the SolMan.
    Your help is much appriciated.

    Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
    In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
    I was reading SAP Note 1344564, It states
    III.Some Main Instances include other Main Instances (E.g., in SAP
    ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
    EP Core.). If the including Main Instance is installed, it's not
    necessary to mark the included Main Instance(s) for relevance.
    Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
    Your input is appreciated.
    Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

  • I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

    I was just watching / streaming TV off Safari on my actual TV.
    I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
    Software update popped-up and said there was an update for Java and for SMC.
    I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
    It won't work in Mirroring or set up as an extended display.
    I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
    What could it be?!

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Any difference between webdynpro for java and webdynpro for abap ?

    Hi all:
       I would like to build one small system in EP.
       I can choose to use webdynpro for java and webdynpro for abap.
       I would like to ask any major difference between webdynpro for abap and webdynpro for java ?
       Is fpm supported in webdynpro for abap ?

    Hi,
    see this thread,
    ABAP Vs JAVA WebDynpro
    Regads,
    J.Joe

  • I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting/clean-up.

    I bought  my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
    Any tips or tricks are appreciated.
    Thank you!

    Time to see about the PRAM battery.
    By the way iOS and OS X are different systems.
    iOS is the operating system for iPads, iPhones, and iPod touch.
    Mac OS X is the operating system for Mac labelled computers.

  • Why is the Amber update different for ATT and Chin...

    Why is the Amber update different for ATT and China? For Lumia 520, it could tap to unlock but, in china, this function is disappeared disappear. Could you give an expain as the matching hardware, otherwise I think it's a definately discriminatory to Chinese.

    Double tap to unlock is not available for any 520, anywhere in the world. See link below. You should always check first before making allegations. 
    http://discussions.nokia.com/t5/Nokia-Lumia/quot-Missing-quot-new-features-in-Amber/td-p/2061872

  • Version mgmnt for RFQ and PO

    Dear gurus,
    pls explain about version management for RFQ and PO
    pls explain in detail

    SPRO –> Material Management –> Purchasing -> Version Management .
    After activating version management you can see the Version tab in ME53N near to source of supply tab in PR.
    http://help.sap.com/saphelp_srm30/helpdata/en/46/882fdd8bfc1743bd5ef8b532f94402/content.htm
    SAP Enterprise Buyer provides you with version management for purchasing documents. As a first step, you can display versions of purchase orders and contracts.
    The system creates a version in the background if you, as a purchaser, carry out one of the following actions:
    · You change a posted purchase order
    · You order a posted purchase order again
    · You change a contract that has already been released
    · You release an already released contract again
    In contrast to the change documents that retain a change history, a version displays the status of a document at a specific point in time.
    Version management provides a check for you as a purchaser, for example, if you wish to display a purchase order in the form in which you transferred it to the vendor on day X. A version provides clarity, for example, in negotiations on a contract.
    Features
    You can use versions as follows:
    · Display
    · Compare and list differences in tabular form. The comparison result has separate areas that can be displayed:
    Header data (including organizational data, tax and payment data; partner data and documents)
    Item data (including taxes and limits if they exist; partner data, documents; account assignment and conditions)
    · Archive, if it relates to transaction data (you can archive versions of purchase orders, but not contract versions)
    You cannot change or output versions. This is only possible for the active document.
    Also, visit the following thread:

  • Communicate link between Java and ABAP Stack for https

    I have configured https in both the java and abap stacks (we have a double stack configuration).  Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions. 
    The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
    I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name).  Where is this configured?  Any help is appreciated..

    Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
    Regards,
    Henrique.

  • I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

    I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
    Can someone advise as to whether i can do the following:
                                Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                      (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                            I
                    I                                         I                                                I                                                              I                                                I
          Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
    (used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
    I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
    Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
    I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
    (*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
    Kind Regards
    Joe

    The diagram was supposed to look more like this......
    Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                                I
         I                           I                          I                            I                                   I
    Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
    Sorry!
    Regards
    Joe

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • JAVA and ABAP stack support pakages

    Hi,
    I am new on installation of solution manager server.
    I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
    I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
    Thanks Reza

    Hello Reza,
    Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
    So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
    follow SAPnote # 19466 for help.
    Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
    I hope that makes things clear.
    Best Regards
    NIraj

  • Java and abap stack connection

    Hello,
    how to check connection b/w Java and ABAP stack.
    I am getting below error :
    SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
      <SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
    We did some upgrades of kernel and jvm and started getting this error.
    Please suggest

    Hi,
    Check this threads
    JCO_SYSTEM_FAILURE
    JCO_SYSTEM_FAILURE
    JCO_SYSTEM_FAILURE . Pls help
    Regards
    Ramesh

Maybe you are looking for