RPTIME00-10-20-30_Urgent

Hi,
i want to know what is RPTIME00-10-20-30.i know their meaning bt where cn i see this and do the necessary setttings.
plz tel me the steps to access this.
help wld be realy appreciated.
TC.
thanx in advance.

Did you check this <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/8a/9868bc46c411d189470000e829fbbd/frameset.htm">SAP Help</a> ?
~Suresh

Similar Messages

  • Generate absence quota through RPTIME00

    Dear Gurus,
    I have to generate absence quota of 2 days every month for all employees and the generated absence quota for the current month will be added in the quota of previous month e.g (2+2=4). I use negative time management and want to use RPTIME00 for this purpose. There are two conditions for quota generation
    1. If the employee leaves by any reason and termination date is greater than 15th will be allowed 2 days
    2. If the employee leaves by any reason and termination date is less than 15th of the month will not be allowed
    Similarly in case of joining of new employee
    1. If the employee Joins by the date is greater than 15th will be not allowed
    2. If the employee joins by the date is less than 15th of the month will be allowed
    What type of schema can I use for this purpose and what will be time management status in infotype 0007 as I am using negative time management. If any expert can explain the source code of schema for this purpose.
    Furthermore can I use the Report RPTQTA00 for generation of remaining annual absence quotas at the same time?
    Ali

    Hi,
    You can copy standard SAP schema for quota generation and customize. Quota name TQTA.
    You can read schema and see comments, help (F1) to understand what it's doing.
    Those quotas that are generated via schema cannot be generated manually.
    Cheers

  • Error while generating quotas using RPTIME00

    Hi ,
    I created the quotas and did configuration in T559E, t559L , t559D. given quomo return value as 01 and also maintained the same 01 in T559L for quota type sel. group .
    but when i tried to run report RPTIME00 i got the error as follows
    STOP: No rule under key $ TMON ****
    Technical error no. 57
    01.06.2008 processing terminated for EE 0009009
    please help me to solve out this error.
    Akhil

    Thanks Gurus...
    Now i am able to run PT60(after i assigned the grouping in emp sub group grouping for PCR and CAP)....but not able to see the absence quota in PT50...
    i maintained 10 leaves in T559E and the same value is refkectd in T559L also...but after running PT60 i am not able to see the quota in PT52
    please let me know the way to check the result.
    Akhil

  • Report RPTIME00 error

    Hi!
    I have an employee with infoset 0007:
    Start: 01.07.2011
    Time Mgmt status:  1-Time Evaluation of actual times
    The status infoset 0003 is in time evaluation section:
    Earl.pers.rec.date   01.07.2011   Pers.calendar from   01.01.2012
    PDC recalculation    01.07.2011
    When I run RPTIME00 for the employee with the params:
    Personnel Number: 00101698
    Time statement variant: SAP&TEDT
    Evaluation up to: 01.07.2011
    I get the next one log errors messages:
    Log: Time Evaluation
           General data
           Successful personnel numbers
           Personnel numbers with errors
           Personnel numbers ended early
               00101698 ANTONIO PEREZ
                   Start of pair formation changed from 20110630 to 20110701
                   Initialization 07/2011
                   01.07.2011 Friday
           Personnel Numbers Rejected
           Messages
               Personnel No.: 00101698
               Period to be evaluated 20110630 before earliest recalculation period 201107
           Statistics
               Selected personnel numbers                         1
               Successful runs for                                0
               including with errors                              0
               Processing not completed for                       1
               Rejected                                           0
               Total number of messages and error messages        2
    I think is trying evaluate 30.06.2011 but in the filter the day is: 01.07.2011 and if I change it by other day greater than 01.07.2011 I get the same error.
    How can I fix this error?
    Kind Regards,
    Julian.

    Hi!
    I paste part of the log
                   Start of pair formation changed from 20110630 to 20110701
                   Initialization 07/2011
                   01.07.2011 Friday
                   Final processing 07/2011
                       IF              EOM       If last day of period
                       ENDIF
           Personnel numbers with errors
           Personnel numbers ended early
           Personnel Numbers Rejected
           Messages
               Personnel No.: 00101698
               Period to be evaluated 20110630 before earliest recalculation period 201107
    Now it doesn't show error because I have copy and modify rules TE20, TE30 and I have changed the 'E' by 'I'.
    Kind regards,
    Julian.

  • RPTIME00 - Custom Internal Table , Custom Clsuter in Custom Function.

    Hello Guru,
    I have a requirement to create custom scheme with totally new custom function , rules .
    my question is it is possible to declare custom internal tables like TIP, TOP and cutom cluster to store results.
    if yes then how ?
    Thanks in adance

    My requirement is based on a project to develop new sap product which can handle complex crew management for industries like railways and airlines,product is still in protoype phase and will basicaly cover right from dispatching crew to various sites to generating there payroll. standard sap works on basis of day and time. but crew industory work on trip. a crew for example pilot fly form point A to B get paid/claims based on on that single trip and whatever activities he has done in that trip. so purely this is based on trip and not day or hours, now we are thinking about using RPTIMEOO as a tool to calculate and create wage type beacuse at the end of the day payroll is getting generated in SAP and also all the crew employee will be setup as master data. this whole product will have its own screeen to capture activties and opereations . will be build on top of sap hcm.
    so was thinking any ways sap says that you can create custom schema and rules but those standard internal tables and cluster are of no use because of the structure is based in trip, wage type will be based in miles that crew travel.
    so trying to find how far this RPTIME00 is flexible .. and is possible to create custom function. becoz at end we are going to update payroll 2010 which can be mapped some how.  RPTIME00 can also give clients to add there own custom functions in future if any new req comes.
    if this is not possible i.e RPTIMEOO can not use custom cluster , then we might have to write abap programs ti do calculation but only problem any new features to be added will lead to code change.
    thanks for your patience ..

  • PCR - RPTIME00 - TM00 - how to find of exceeding of the working day

    Hello,
    I'm new in RPTIME00 I need to write a PCR - schema ZM00 (TM00) that find of exceeding of the working day and generate wage type 1506 for cluster B2?
    For example employee works:
    MO: DWS=06:00-14:00
    TU: DWS=06:00-14:00 but TI2011=04:00-14:00
    The point is that I must generate wage type only for time par 04:00-06:00 without generate of WT for overtime (M)
    I though that I need generate WT from PCR with ADDZLS1506 for example... but in this case I need to find exceeding of the working day
    Any ideas?
    I tried with this:
    APD1      *   ****           HRS=D0061
    APD1      *   ****           HRS?S
    APD1      *   ****  >        GCY APD2
    APD2      *   ****           OUTWPTIMER
    APD2      *   ****  1        HRS=SNTB  
    APD2      *   ****  1        HRS?PBEG
    APD2      *   ****  1 >      HRS=PNUM  
    APD2      *   ****  1 >      HRS?CTEPOL
    APD2      *   ****  1 > >    HRS=PNUM                    
    APD2      *   ****  1 > >    HRS?0
    APD2      *   ****  1 > > >  ADDZLS1506
    APD2      *   ****  1 > > >  COLOP*
    Thanks a lof for help.
    BR,
    M
    Edited by: mn-sdf on Jul 6, 2011 10:59 AM
    Edited by: mn-sdf on Jul 6, 2011 11:20 AM

    Thanks for answer but I don't need generate overtime beyond the planned working hours in the end of month. I have WT in PY for additional pay for "exceeding of the working day" (this is not overtime but ... salary supplement? My english is not good enough, sorry).
    I don't need approval for overtime (via 2007 and GOT...) which give me "M" pair type for this case (WT1506). I don't need them. Opposite this I need to find:
    previous day was free or not?
    when was a free day, I don't have to generate 1506
    when is a working day, I have to generate 1506
    My PCR generate WT1506 correctly but on every day where I have start hour (2011) before start working time from DWS.
    Maybe the point is how to find the previous day was free or not?
    Do you know how to do it?
    Thanks a lot!
    BR,
    MN
    Edited by: mn-sdf on Jul 6, 2011 12:41 PM

  • Time evaluation logging and history (RPTIME00)

    Folks,
    <b>Does anyone know any way that I can display a history of time evaluation executions?</b>
    I understand that it would be possible to find this sort of information on internal table VERSION. However this does not give me a history but only info on the last run.
    Another option would be through STAT and request info on RPTIME00. However, this does not work in my case either since we only keep 7 days of log.
    Again, do you have any ideias of a history log for RPTIME00???
    Thank you in advanced!
    Eric

    Hi Eric,
    you could use enhancement (transaction SMOD) S38MREP1.There you write every start of RPTIME00 in an own table with for example
    reportname, sy-userid,sa-datum,sy-uzeit etc.
    Documentaion of exit:
    Function exits are reserved for customer developments that perform      
    additional checks or similar functions prior to the online start of an  
    ABAP report. They are called every time an ABAP report is started,      
    independent of how the report is started (reporting tree, SA38, SUBMIT  
    REPORT (...)).                                                                               
    Immediately after a function exit is called, standard tests are         
    performed (authorization, start using variant only, and so on (...)).                                                                               
    Parameters:                                                                               
    Importing parameter:                                                                               
    PROGNAME (TRDIR-NAME)  Name of the ABAP report                                                                               
    SECU     (TRDIR_SECU)  Authorization group (  >  Program attributes)                                                                               
    SSET     (TRDIR-SSET)  = X: Your report may only be started using a     
    variant (  > Program attributes)                                                                               
    VARIANT  Name of the variant, if the report has been started using a    
    variant; SPACE, if the report has been started without the use of a
    variant.                                                                               
    Exceptions:                                                                               
    CUSTOMER_EXCEPTION exceptions that a customer has developed can be     
    triggered here, Caution: This exception is displayed with an A message 
    (transaction terminated) in the calling program.
    Hope that helps.
    Regards
    Bernd

  • Error In RPTIME00

    Hi Gurus
    I have error Message while running an RPTIME00 saying that
    " No Entry In Table $ for key $ T555f E40483
      Error  Entry no 83
      A Complex Application error Has Occured"
    Pls guide where it could be a problem. Where as i need to Accrue it monthly, Accrual Entitlement as on Pro Rata Calculation  and Trf Time as Upon Accrual, i tried with various combination Trf time and Applicability say for Eg Applicability as Hire Date and Trf Time Per Payroll Period/ Other Period
    But it gives the same error, when i tried to search the table for T555f in sm30 there is no table in dictonary it says
    What can be done pls guide.
    Rgds
    M Bharath

    Hi,
    Please, make sure that for all the Pers nos for which you are executing RPTIME00 the work schedule used for these Pers Nos are mapped in the time evaluation table & the valuation class is defined.
    Considerung all your evalution & rules are correctly defined.
    Hope this helps.
    Sarika

  • RPTIME00- tsv_tnew_page_alloc_failed

    Hi,
    Lately we have been having a problem with program RPTIME00  in our production box for a specific variant.  We have been  having the error "tsv_tnew_page_alloc_failed" and so far  have been doing the temporary solution of splitting the  process into several runs with smaller selections.
    We have tested the same thing in our QA box and it works  without having the same problem.  Our basis do not want to  increase memory allocation for this program for fear of  side effects and we do not want to touch the code since it  is a standard program.  We cannot find the path specified  on note 393820 (restrict log).
    Please help.

    Our basis replied to us with : the loop can take up to 2GB and get the dump TSV_TNEW_PAGE_ALLOC_FAILED or possible worse DB errors if some people "force" basis to increase the SAP memory parameters: it will get even more if DB grows so you would continually increase (dangerously!!) ..... etc... then gives us some codes to prove his point.
    Would it be advisable to report this issue to SAP since our basis fears this DB thing.  This is having no problems with our test box so it is not data problem.  Maybe we could get help there to convince our basis to take this "risk" or maybe there are other solutions aside from dividing the variant every time.  What do you think?

  • Can you give two scenarios and explination on rptqta00, rptime00. plz show me the exact difference between these two ?

    can any one explain me brielfy?

    Scenario for RPTIME00... Read this
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0b58e9b-2239-2a10-e68c-ba8b3823e8c6?overridelayout=t…

  • ERROR RPTIME00

    Hi experts!!
    I have a schema copy of TM00, I have the input/output record of the employ in infotype 2011.
    I'm checking the behaviour and I get this error and I don't know how to fix it.
    PTIP  TE30 GEN
         Input
         Processing
              Call rule TE30
             Error entry no. 04 Clock-out cannot be delimited
             05.07.2011 Processing terminated for EE 00101800 xxxx yyyyy, John
    The planned working time is from 8:00 to 15:00
    The day 04.07.2011 has the input time, but not the output
    The day 05.07.2011 has the output time, but not the input time
    The employ has this records in infotype 2011:
    04.07.2011     08:00:00     P01     Llegada o salida
    05.07.2011     15:00:00     P01     Llegada o salida
    The day 04.07.2011 automatically delimited the record and show a warning :
    Error entry no. 20 Pair automatically delimited
    04.07.2011 Incorrect processing for EE 00101800  xxxx yyyyy, John
    and go forward.
    But the day 05.07.2011 stops processing.
    Kind regards,
    Julian.

    Hi Jaydeep,
    The theorical input and output time for this employee is: 8:00 input, 15:00 output.
    The day 05.07.2011 the employee forgot the input record in the clock, so there is only one record in infotype 2011, this record has the 15:00 and it is the output time.
    So when we run the process RPTIME00 we get the error:
          Call rule TE30
         Error entry no. 04 Clock-out cannot be delimited
         05.07.2011 Processing terminated for EE 00101800 XXXX YYYY, JOHN
    I think the process should understand that it's missing the input record (8:00) and the other one is the output record. But the process stops because it doesn't know delimited.
    This will be a usual fact because the employees sometimes will forget record the input or output in the clock.
    Kind regards,
    Julian.

  • Performance problems with RPTIME00

    Hi,
    when we run program RPTIME00 we encounter a performance problem.
    When evaluating the data some infotypes (0000 and 0001) are read much too often. For every day of the period we evaluate (e.g. the month october) these infotypes are read over and over again from the evaluated day down to the first of januari.
    How is this last date definded?
    This way we need over a minut for evaluating a month for one person.
    I'm rather new in this field, but it seems something happened in our system that made occur this problem.
    Has anyone has an idea what might be going on?
    Thanks a lot.
    Kris

    Hi Cris,
    Once a rptime00 execution is done with retro and the results are saved, the retro date will be cleared from I0003 and no more retro will be done until an infotype relevant for time is retroactively changed.
    To see where the bottleneck is, do an abap trace with transaction SE30.
    I did a trace in a test system and the results ordered descending by net time were:
           Net Gross (%) Net (%) Call
    1.517.831      13,5     6,3  Perform BOPER
    1.148.119       4,9     4,8  Call Func. HR_READ_INFOTYPE
      900.470       4,0     3,7  Call Func. HR_QTACC_QUOTAS_TRANSFER
      629.849      20,8     2,6  Perform REGEL
      584.148       4,2     2,4  Perform RE52C5
      560.019       2,3     2,3  Call Func. HR_PL_MOVE_APER_TO_PLOG
      557.773       2,3     2,3  Perform FILLVARGT52C5
    HR_READ_INFOTYPE for 0001 is on top but jusst consumed 4,8% of time which is not that much.
    I might also happen there are database issues. Check that.
    check, just in case you do not use the option "Display log".
    rgds,
    Carlos.

  • Diff between RPTIME00 and RPTQTA

    Hi Experts,
    1) what is difference between RPTIME00 and RPTQTA ?
    2) RPTIME00 is used for only + ' vetime or -' ve time ?
    charan191atgmaildotcom
    thanks and regards
    Charan

    HI Charan,
         Using  Report RPTQTA00, you can generate time-off entitlements that are to be issued at one time in advance. One such example is standard annual leave, which is granted for one calendar year. this is used with time management ststus 0 ie in case of -ve time management
         If you use time evaluation (RPTIME00), you can also permit time-off entitlements to be determined after a calculation period is completed. Standard annual leave is an example where entitlement increases for each employee at the end of a calculation period. In this process, as opposed to the granting of  leave in advance, employees receive their time-off entitlement after they have already "worked" for it. This is used if you are using +Ve time management.
    Warm Regards,
    Kapil Kaushal

  • Quota generation after organizational reassignment

    Hi all:
    Has anyone come across the issue below? If so, what steps did you take to remedy this?
    We generate quotas via RPTIME00. The main issue is that after an org. change, once time evaluation processes on the day of the accrual (in the new PSG), the employee errors out in time evaluation with the following error, "Error entry no.83 Error when creating absence quota. A complex application error has occurred".
    This is because in the old PSG the employee had absence quota types 01, 02, 03, 04. Under the new PSG, the employee has different absence quotas types because their entitlements are different based on seniority.
    For example, in the old PSG, the quota 01 will be used for service years 1 - 3. In the new PSG, quota 01 will be used for service year 1, quota 2 for service year 2, and so on. Because they are still in the
    same service year when the org. change takes place, the system errors out in the new PSG because it is reading quota 01 (old PSG) and it should be generating accrual for quota 02 in the new PSG.
    Any help would be greatly appreciated!
    Regards,
    Brian

    Hi:
    Upon the assignment to the new PSA, the system recognizes the change and processes the new quota selection rules.  However, because the validity period still exists prior to the date of the transfer the error message in time evaluation occurs because technically it cannot create the new quota type with those groupings for the employee prior to them transferring to the new PSA.
    How can the start of the validity period in the new PSA be changed to the transfer date?
    Regards,
    Brian

  • Custom report to get the vacation hours for the coming year befor time eval

    Hi Gurus,
    We have this strange requirement for the vacation hours. We need to write a report that shows the remaining vacation hours for the coming year. My functional guys told me that we will get this after we run the time evaluation for each employee. but our requirement is to get these hours before time eval and write them to a flat file.
    They told me that we need to go through RPTIME00 program and get the logic where it calculates the vacation hours for the coming year. but the time schema is really big and to analyze this, it will take a long time (at least for me).
    So, did anybody came across this kind of situation? Please help me.
    Thanks,
    Srinivas.

    Do you need quota? There are standard reports to project quota PT_QTA10 - Display Absence Quota Information.

Maybe you are looking for