RPTIME00- tsv_tnew_page_alloc_failed
Hi,
Lately we have been having a problem with program RPTIME00 in our production box for a specific variant. We have been having the error "tsv_tnew_page_alloc_failed" and so far have been doing the temporary solution of splitting the process into several runs with smaller selections.
We have tested the same thing in our QA box and it works without having the same problem. Our basis do not want to increase memory allocation for this program for fear of side effects and we do not want to touch the code since it is a standard program. We cannot find the path specified on note 393820 (restrict log).
Please help.
Our basis replied to us with : the loop can take up to 2GB and get the dump TSV_TNEW_PAGE_ALLOC_FAILED or possible worse DB errors if some people "force" basis to increase the SAP memory parameters: it will get even more if DB grows so you would continually increase (dangerously!!) ..... etc... then gives us some codes to prove his point.
Would it be advisable to report this issue to SAP since our basis fears this DB thing. This is having no problems with our test box so it is not data problem. Maybe we could get help there to convince our basis to take this "risk" or maybe there are other solutions aside from dividing the variant every time. What do you think?
Similar Messages
-
Generate absence quota through RPTIME00
Dear Gurus,
I have to generate absence quota of 2 days every month for all employees and the generated absence quota for the current month will be added in the quota of previous month e.g (2+2=4). I use negative time management and want to use RPTIME00 for this purpose. There are two conditions for quota generation
1. If the employee leaves by any reason and termination date is greater than 15th will be allowed 2 days
2. If the employee leaves by any reason and termination date is less than 15th of the month will not be allowed
Similarly in case of joining of new employee
1. If the employee Joins by the date is greater than 15th will be not allowed
2. If the employee joins by the date is less than 15th of the month will be allowed
What type of schema can I use for this purpose and what will be time management status in infotype 0007 as I am using negative time management. If any expert can explain the source code of schema for this purpose.
Furthermore can I use the Report RPTQTA00 for generation of remaining annual absence quotas at the same time?
AliHi,
You can copy standard SAP schema for quota generation and customize. Quota name TQTA.
You can read schema and see comments, help (F1) to understand what it's doing.
Those quotas that are generated via schema cannot be generated manually.
Cheers -
Hi All,
We are facing these errors approx. daily (but not everyday):
MEMORY_NO_MORE_PAGING
TSV_TNEW_PAGE_ALLOC_FAILED
Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
Here is the current configuration:
Roll, extended and heap memory EXTM
ztta/roll_area 3000320 Byte Roll area per workprocess (total)
ztta/roll_first 1024 Byte First amount of roll area used in a dialog WP
ztta/short_area 3200000 Byte Short area per workprocess
rdisp/ROLL_SHM 32768 8 kB Part of roll file in shared memory
rdisp/PG_SHM 16384 8 kB Part of paging file in shared memory
rdisp/PG_LOCAL 150 8 kB Paging buffer per workprocess
em/initial_size_MB 14500 MB Initial size of extended memory
em/blocksize_KB 4096 kB Size of one extended memory block
em/address_space_MB 4096 MB Address space reserved for ext. mem. (NT only)
ztta/roll_extension 2000683008 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia 2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0 Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit 40894464 Byte Workprocess restart limit of heap memory
abap/use_paging 0 Paging for flat tables used (1) or not (0)
I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
Here is our PRD SPEC:
Processor: Intel Xeon X5450 3.00GHz
RAM: 20 GB
HDD: 140 GB Internal
SAN: 700 GB RAID
Please Advise,
Regards.Hi Michael,
Thank you for your information, here is the current dump (most recent one):
Runtime Errors MEMORY_NO_MORE_PAGING
Date and Time 13.10.2010 14:32:19
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 16192
Extended memory (EM)........... 305858320
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 16384
Maximum address space.......... " "
And Current View EM (in ST02):
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
Roll area 40.18 24,274 24,976 262,144 0 IDs 99.59
Page area 10.94 28,678 34,400 131,072 131,072 Statement 97.00
Extended memory 31.43 4,665,344 5,296,128 14,843,904 0 0.00
Heap memory 139,015 0 139,015 0 0.00
Detailed Information:
Roll memory Dialog session kB 2,930
Nondialog sess. kB 2,930
Available kB 60,416
in shared memory kB 262,144
on disk kB 0
Used kB 24,274
Maximum used kB 24,976
Paging memory Session buffer kB 1,200
Available kB 262,144
in shared memory kB 131,072
on disk kB 131,072
Used kB 28,678
Maximum used kB 34,400
Extended memory Dialog session kB 1,953,792
Nondialog sess. kB 1,953,792
Available kB 14,843,904
Used kB 4,665,344
Maximum used kB 5,296,128
Heap memory Dialog session kB 1,953,792
Nondialog sess. kB 0
Used kB 139,015
Maximum used kB 139,015
Current Parameters Setting:
Buffer Name Comment
Profile Parameter Value Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area 3000320 Byte Roll area per workprocess (total)
ztta/roll_first 1024 Byte First amount of roll area used in a dialog
ztta/short_area 3200000 Byte Short area per workprocess
rdisp/ROLL_SHM 32768 8 kB Part of roll file in shared memory
rdisp/PG_SHM 16384 8 kB Part of paging file in shared memory
rdisp/PG_LOCAL 150 8 kB Paging buffer per workprocess
em/initial_size_MB 14500 MB Initial size of extended memory
em/blocksize_KB 4096 kB Size of one extended memory block
em/address_space_MB 4096 MB Address space reserved for ext. mem. (NT on
ztta/roll_extension 2000683008 Byte Max. extended mem. per session (external mo
abap/heap_area_dia 2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0 Byte Max. heap memory for non-dialog workprocess
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit 40894464 Byte Workprocess restart limit of heap memory
abap/use_paging 0 Paging for flat tables used (1) or not (0)
Please guide me if it requires any further analysis. -
Error while generating quotas using RPTIME00
Hi ,
I created the quotas and did configuration in T559E, t559L , t559D. given quomo return value as 01 and also maintained the same 01 in T559L for quota type sel. group .
but when i tried to run report RPTIME00 i got the error as follows
STOP: No rule under key $ TMON ****
Technical error no. 57
01.06.2008 processing terminated for EE 0009009
please help me to solve out this error.
AkhilThanks Gurus...
Now i am able to run PT60(after i assigned the grouping in emp sub group grouping for PCR and CAP)....but not able to see the absence quota in PT50...
i maintained 10 leaves in T559E and the same value is refkectd in T559L also...but after running PT60 i am not able to see the quota in PT52
please let me know the way to check the result.
Akhil -
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 18.11.2009 12:12:09
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin SharmahI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " " -
BW Error : TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
While updating data from PSA of an infopackage i got a short dump called TSV_TNEW_PAGE_ALLOC_FAILED.
So,I made the status of infopackage red and deleted the request.
Will the data be there in the PSA?
If yes,then how to upload the data from psa to datatarget.
There are two data targets maintained for this infopackage.
Do i need to schedule the infopackage again.
Please give me the correct solution.
Its very urgent.Hi,
this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
Now,
if it is a delta,
then you have to make sure that the techynical status is red before delting the req.
Now if full
then delete the red req after forced red in both the data targets and re run the infopackage
contact your basis on this error if required
Hope this helps
Janardhan Kumar -
Internal table Memory Issue Exception TSV_TNEW_PAGE_ALLOC_FAILED
Hi experts,
I am working on a conversiojn programme. This programme is dealing with 4 input files.
Each of these files is having more than 50,000 records. I am reading the corresponding application server files to fill
the internal tables related to these files.
The files are being read properly and internal tables are being filled.
However when i try to assign any of these 4 internal tables to other temproray internal tables in programme(requirement)
i get a dump TSV_TNEW_PAGE_ALLOC_FAILED.
The dump is related to memory issue.
I think The memory available in the programme at this point is not sufficient for table assignment.
Please suggest any alternatives where i can save any memory .
Changig of basis setting is not an option.
Regards,
Abhishek KokateHi Kiran,
I am not agree with you , I am agree with Hermann.
While writting file you restrict the record max 5,000 to 10,000 records and process don't store the mutch data into internal table.
After every used refresh the internal table, Declare table where necessary.
But you can try to avoid the copy cost.
Rgds
Ravi Lanjewar -
Production error - Urgent - TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
Im getting dumps in production system with
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required.
Any pointers to this wil be helpful
thanks
Boomathe TSV_TNEW_PAGE_ALLOC_FAILED dump has naught to do with the version of MCVBAPB. the dump clearly states that there was no more paging area available to run the report/transaction that caused the dump. this might either be due to an too big selection or a lack of memory. Consult your basis-people with that one.
the version of MCVBAPB: MCVBAPB is a structure belonging to LIS (Logistics Information System) so obviously someone changed that structure. check in t-code SE11, MCVBAPB the runtime and the database object of the structure (in case it is active). -
Run time error : TSV_TNEW_PAGE_ALLOC_FAILED in st22
Hi All,
we are getting runtime error : TSV_TNEW_PAGE_ALLOC_FAILED in production system. for this report rsppfprocess we have batch jobs so may be its running all the action definition and coming up with consuming more memory ? we already checked with basis but they are saying its rsppfprocess program issue. can you please guide me how to solve this issue.
Jimmi.Hi Jimmi,
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but is not available.
When Extended Memory is used up, the process will go into PRIV mode
as it starts using Heap Memory (or vice-versa). No other user will be able to use this work process while it is in PRIV mode.
If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the work process will be freed.
This seems to be a problem with loading of shared memory.
Check value of parameter abap/shared_objects_size_MB in RZ11.
Set the parameter to minimum 250 and increase it when necessary, as per SAP note 1281896. You must start the system newly so that the change becomes effective.
Also take a look at SAP Note 1166259.
Gervase -
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
Please help me. I'm having ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED job cancelled for my payment run F110.
Before this we having performance issue for the payment run F110. We implemented notes (SNOTE 1343823) to solve the performance issue. And today when we wanted to do payment run some of the payment run is automatically cancelled by system.
Tqhi,
Try this Note 1250607 - Long runtime and high memory reqmt for payment program
thanks and regards
Praveen.J -
Runtime errors: TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
When I am trying to check the consistency of background jobs in SM65, It is throwig a runtime error TSV_TNEW_PAGE_ALLOC_FAILED. Kindly look into the below text message from ST22.
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "IT_18" could not be enlarged further. To allow
error handling, the table had to be deleted before this log was
created. So, if you branch to the ABAP debugger from the display
of this log, the table will there be displayed with 0 rows.
At the moment of the termination, the following data was
determined for the respective internal table:
Storage location: "Session memory"
Row width: 1296
Number of rows: 1166120
Allocated rows: 1166120
Newly requested rows: 8 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server ord-sapprd_PRD_00 on host ord-sapprd (wp 0)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1878
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 1709536
Extended memory (EM)........... 408685712
Assigned memory (HEAP)......... 1190561024
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"TSV_TNEW_PAGE_ALLOC_FAILED" C
"SAPLSBPT" or "LSBPTFXX"
"DO_TBTCO_CONSISTENCY_CHECK"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "ord-sapprd"
Network address.......... "10.31.18.27"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Kindly suggest me the options ASAP as this is happened in the production system.
Thanks in advance,
Suneetha ReddyHi Sunnetha,
SM65 is a resource hungry tcode, and always suggested to run during a off-business hours. Try to run when there is not much acvitity going on in the system.
I'm not very much sure, but please check how many entries there in TBTCO table. as the dump gives indication of
DO_TBTCO_CONSISTENCY_CHECK.
Check RSBTCDEL(2) program is running daily or not. This runs as a background job to delete the old job information from the tables TBTC*. If this has not run, then you can run and delete older job logs and then retry.
Which system you're using? ECC or BW??
Note - parameter settings of BW largely varies from that of a ECC system.
Thanks,
Debasis. -
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED during extraction
Hi,
Anyone knows what the solution is to this problem:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could |
| not be further extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "xxx" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table
|What happened?
| You attempted to extend an internal table, but the required space was
| not available.
|Error analysis |
| The internal table "\FUNCTION=CRM_UPLOAD_BTMBDOC_FILL\DATA=ET_BILLPLAN_D" could
| not be further extended. To enable
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1908 |
| Number of rows: 35912 |
| Allocated rows: 35912 |
| Newly requested rows: 8 (in 1 blocks) |
| Last error logged in SAP kernel |
| |
| Component............ "EM" |
| Place................ "SAP-Server XXXX" |
| Version.............. 37 |
| Error code........... 7 |
| Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV " |
| Description.......... " " |
| System call.......... " " |
| Module............... "emxx.c" |
| Line................. 1897 |
| |
| The error reported by the operating system is: |
| Error number..... " " |
| Error text....... " " |
| |
| |
| |
| |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221152 |
| Extended memory (EM)........... 1826778184 |
| Assigned memory (HEAP)......... 2000035456 |
| Short area..................... " " |
| Paging area.................... 73728 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLCRM_UPLOAD_BTMBDOC" or "LCRM_UPLOAD_BTMBDOCF36" |
| "FILL_BILLPLAN" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| | -
Short dump TSV_TNEW_PAGE_ALLOC_FAILED when import SAPKB70016
Hi all,
I´m trying to import the support package SAPKB70016 im my QAS system and I got an error. The import stop on phase XPRA_EXECUTION and I saw at the tcode sm37 that there is a job running with the name RDDEXECL. This job is canceled with the dump TSV_TNEW_PAGE_ALLOC_FAILED. I already changed some parameters and also I applied some notes but I can´t solve this issue.
Parameter changed Before After
ztta/roll_area 30000000 100000000
ztta/roll_extension 4000317440 8000000000
abap/heap_area_dia 2000683008 4000683008
abap/heap_area_nondia 2000683008 4000683008
abap/heap_area_total 2000683008 4000683008
em/initial_size_MB 392 1024
abap/shared_objects_size_MB 20 150
es/implementation map std
JOB LOG:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server FQAS were synchronized
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 LOG:
Memory location: "Session memory"
Row width: 510
Number of rows: 0
Allocated rows: 21
Newly requested rows: 288 (in 9 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server FQAS_QAS_01 o
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhau
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 99661936
Extended memory (EM)........... 8287273056
Assigned memory (HEAP)......... 1376776176
Short area..................... " "
Paging area.................... 49152
Maximum address space.......... 18446743890583112895
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_ENH_UTILITIES_XSTRING======CP" or "CL_ENH_UTILITIES_XSTRING======CM008"
"GET_DATA"
Now, I don´t know what I can do to solve this problem.
Can you help me?
ThanksHi all,
Gagan, I already changed my parameters according to the above post. I increased this parameters until maximum allowed but the dump still persists.
Bhuban
In this server I have 16GB RAM and 600GB HD.
total used free shared buffers cached
Mem: 16414340 4973040 11441300 0 454436 3572592
-/+ buffers/cache: 946012 15468328
Swap: 20479968 0 20479968
Size Used Avail Use% Mounted on
441G 201G 218G 48% /oracle
20G 6.5G 12G 36% /sapmnt
25G 21G 2.7G 89% /usr/sap/trans
25G 8.8G 15G 39% /usr
20G 14G 5.1G 73% /
Anil, I already stop my appl and my db, I rebooted my OS too and after i tried again, no success.
What else can i do?
Thanks for all. -
TSV_TNEW_PAGE_ALLOC_FAILED Shortdump , memory issue
Hello,
We are facing one issue of Memory dump for one of the Background Job. The Job is fetching a very huge data and it is failing with the shortdump TSV_TNEW_PAGE_ALLOC_FAILED. I have asked application user to brake the variant of period and now he is running job for 1 single day. But since the amount of data volume is so huge, it is not going thru.
~
The short dump gives following information about memory parameter value:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6225552
Extended memory (EM)........... 1001392792
Assigned memory (HEAP)......... 2998638656
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 18446744048641535328
~
The termination occurred in line 1009 of the source code of the (Include)
1009 -> SELECT * FROM .............
~
Instance Profile Memory parameter values :
rdisp/ROLL_SHM 8000
rdisp/ROLL_MAXFS 16384
ztta/roll_area 6500000
ztta/roll_first 1
ztta/roll_extension 1000000000
abap/heaplimit 20000000
abap/heap_area_nondia 3000000000
abap/heap_area_dia 3000000000
abap/heap_area_total 6000000000
~
Please note that once we got the dump "SYSTEM_IMODE_TOO_LARGE" and we have set the abap/max_imode = four_gb.
~
Can any one help me to resolve this error ? how much memory I can assign ? How to calculate memory available and how to calculate memory required ?
The job is very important from business point of view and do not have time to optimize the code as of now.
Any help will be higly appreciated.
Thanks
Best Regards,
Basis CKHi Markus,
I have gone tru the SAP note you have recommanded. Actually our requirement is that this job is very urgent from business point of view and code optimization will take time as we need to first test in sandbox and then the production. Looking at the scenario, I have decided with this approach :
<b>Step 1 -></b> Remove parameter abap/max_imode = four_gb from instance profile as this parameter is not required.
Please refer note SAP note 548845 - Internal modes users more than 2 GB. According to this note "As of SAP_BASIS 6.20 Support Package 38 and SAP_BASIS 6.40, you do no longer require the profile parameter. Therefore, delete this parameter from the profile; otherwise there is an upper limit of 4 GB."
(Here I assume that by removing the parameter abap/max_imode, it can go beyound 4GB)
<b>Step 2 -></b> Increase the memory dyanimcally thru RSMEMORY program for that application server and run the Background Job to make it finish successfully.
RSMEMORY Parameter is showing following value. <b>Is it possible for you to recommand how much we can increase the memory ?</b>*
Result of RSMEMORY
~~~~~~~~~~~~~~~~~
Quota Dialog
Step Memory class Size [bytes]
1 1
2 1 1000000000
3 6500000
4 2 3000000000
5
Memory classes: ROLL(0) EM(1) HEAP(2)
1 6500000
2 2 3000000000
3 1 1000000000
4
5
Memory classes: ROLL(0) EM(1) HEAP(2)
abap/heap area dia: 3000000000
abap/heap area nondia: 3000000000
abap/heap area total: 6000000000
em/stat log timeout: 600
em/stat log size MB: 20
Any help will be highly appreciated.
Thanks
Best Regards,
Basis -
TSV_TNEW_PAGE_ALLOC_FAILED with internal table declared with occurs 0
HI guys,
when the internal table is declared as occurs 0, the dump TSV_TNEW_PAGE_ALLOC_FAILED is encountered, when changing the declaration into standard table, th dump disappears. Why is this so?
Thanks!There are three type of tables: Standard, sorted and hashed tables (see [here|http://help.sap.com/abapdocu_70/en/ABAPDATA_ITAB.htm]). When you define a table using the keyword OCCURS you're still defining a standard table.
Your exception indicates that you're running out of memory. The difference in the declarations that you mention shouldn't cause that. Main difference between the two declaration versions is probably that your table defined via OCCURS has a header line, whereas your other table doesn't (unless you declared it explicitly as WITH HEADER LINE).
I don't think though that with that little information anybody could explain the short dump. Actually it sounds rather odd that the change you mention should cause the dump (or make it go away). So I suspect you probably have to post further details. You might want to check the shortdump yourself and place a breakpoint at this place and run it for each version. Maybe you can see some difference...
Maybe you are looking for
-
Unable to assign Chart of Depreciation to Company Code
Dear Experts, I am trying to assign newly created chart of depreciation to my company code but system is not allowing me giving the following error message: "You cannot process company code ****, it contains assets". When I go for F1, then further it
-
Push to Talk on Android Phones
Will Verizon ever release a push to talk app for our android phones (Thunderbolt and DroidX) so we can communicate with other Verizon push to talk customers?
-
How to use touchpad to highlight,copy and paste?
HP ENVY laptop how to highlight text or message using the HP single touchpad>I want to select words or phrases ,then copy(CTL C),then CTL V to paste? Thanks
-
JMS Server Target & Deploy error
Hi All, I am getting the error while creating the JMS Server. I have created the JMS Server and on Target and Deploy tab,when I select the server name as target and hit the Apply button, I get the following err
-
I need help. Please let me understand how to pass from a 30 day trial to buying the product. I only found a request to adhere to an Adobe "Creative Cloud" program and do not understand if that will give me the right to doenload the program/s or if it