RQS and visa on wait
Hello!
I have Agilent 35670A signal analyzer over GPIB. For the past three months or so, it has been working fine. However, since last week, I seem to have a problem with it, especially with visa on Wait.vi.
What happens is that Labview waits and wait without processing to a next vi even if the instrument has finished its job. The particular vi that is problematic is called "run.vi", in which, by highlighting the execusion, I have found that the vi named as "wait on RQS" is not responding at all.
I was previously using Labview 7.1, but when the problem started, I upgraded it to the version 8, but without any success of getting rid of the problem.
Looks to me that the instrument lost the communication with the labview, and the labview is still trying to communicate with it. Only this specific function causes trouble and the rest of the function, such as obtaining the data itself (without having the labview to run the instrument) works OK.
Any suggestions?
Hello,
thank you for your reply.
I am LabView beginner and try to measure the frequency response of actuator with LabView 7.1 and Agilent 35670A signal analyzer.
When I test one sample, it works OK, but when I measure next sample(new one) again, I get the following error message.
Error 1073807339 occurred at VISA wait on Event in Wait for RQS.vi
It happens almost same with havenoidea's. LabView wait and wait ("Wait on RQS.vi is not response at all") even if the signal analyzer finished the measurement, then I get the error message. ( but I get the result from the signal anayzer). In this case the sweep frequency of the signal analyzer (from 2Hz up to 50KHz) changes very slowly.
I use Window XP and NI-488.2 ver.1.70 in my PC.
I attached the related VI for your reference.
Thank you
Attachments:
Frequency Response.zip 319 KB
Similar Messages
-
I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?
RainbowGarner wrote:
By install i presume you mean add it to the bottom of the machine ?
Yes, and it's rather easy to do too.
Your machine has two slots. These are the specs for a 2008 iMac (if your machine is different then check with Crucial.com and they will match the correct RAM for your machine)
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
So all you need to do is visit Crucial.com or OtherWorld Computing to order it, and OtherWorld Computing has install videos.
Here is one on YouTube. Easy pleasy.
Just make sure to discharge any static electricity and not touch the contacts, just the plastic edges.
https://www.youtube.com/watch?v=Fb_B3K1Za5Y -
Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.
Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails. -
Using iPhote Keywords with PS Elements and visa-versa
Howdy,
Does anyone know if you can xfer (import/export) iPhoto keywords to PS Elements 4 or Photo Bridge and visa-versa?
Or do you have to create a new Keyword list with Photo Bridge and PS Elements 4MV:
You can use iView MediaPro in the Demo mode to catalog your iPhoto LIbrary and then sync (write) the keywords back to the original file. That will permit other applications to read those annotations in the source file. Check out Tutorial #1 here. The methodology is there to do what you want even though it's geared for a different issue.
G5 Dual Core 2G, 2G RAM, 22 Display, 250G HD, 250G FW HD, QT 7.0.4P Mac OS X (10.4.5) Canon S400, i850 & LIDE 50, Epson R200, 2G Nano -
What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.
Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
Digital Publishing Suite Help | Creating viewer apps for private distribution
Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
Another option is to add the development app to several devices and use those for your demo. -
Some apps that are universal will automatically download like, temple run, ibooks, bejeweled. But many other apps that are also universal like watchespn and pandora radio , wont automatically download to my ipad when i download them on my iphone and vis versa. Idk what the problem is and the guy i called at apple couldnt figure it out. Is this happening to anyone else and if so have you fixed it? dont say rebooyt or restart because i did that and nothin happened. Thanks
On both devices tap Settings > Store
Toggle Apps off then back on.
See if that helps...
edited by cs -
I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Can't open Pages 05 saved in Dropbox on new Pages iPad app and visa-versa
Updated to the new Pages 05 on all my devices (macbook, iPad, iPhone). Problem now is that I want to save documents into Dropbox. Works fine when saving a file from my macbook to dropbox, and then opening it on my macbook again. But whenever I create a document on either the macbook or iPad and save it into dropbox, it will not allow me to open it on the other device. I am very uneducated in this area, especially the new 'packages' that files are put in now, I'm not understanding how this all works and why I cannot open a pages file created on my macbook in a pages app on my iPad and visa-versa.
I've just encountered this problem trying to work away from my main mac on pages and numbers documents, through my iPad - this was a great feature through dropbox - now it's just another frustration - Apple why are you taking us backwards? To resolve it I have to spend time moving all my documents to iCloud which is just making what was a brilliantly simple file sharing option, now very complicated.
-
During an app update it froze and has said waiting for 2 days and I am unable to open or delete
During an app update it froze and has said waiting for 2 days and I am unable to open or delete. How do I recover my app?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer
Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ -
My husband just got an iphone. I've had mine for a while. We use the same email address so I thought we could use the same apple id and password. But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes." Not good. How do I unlink them?
Read this planning tips:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family -
I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?
Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO -
How do i Drag and drop From one tree to another and vise versa?
I have two tree structures and i'm trying to drag a leaf of a branch from one tree to another and vise versa. i'm using flex 3 to code it. I'm also trying to put a prevention on dropping a leaf of one tree from being dropped inside a branch of another tree. Anything that is dragged over to another tree should be placed as a dangling node in that tree. Please share this code and help me find a solution.
<?xml version="1.0" encoding="utf-8"?><mx:Application
xmlns:mx="
http://www.adobe.com/2006/mxml" xmlns:comp="
com.adobe.flex.extras.controls.*" initialize="data2
new
ArrayCollection(countries);"layout="
absolute"verticalAlign="
middle" backgroundColor="white" height="
551">
<mx:Script>
<![CDATA[
importmx.events.FlexEvent;
importmx.collections.ArrayCollection;
importmx.controls.Alert;
importmx.events.DragEvent;
importmx.managers.DragManager;
importmx.core.DragSource;
importmx.core.UIComponent;
importmx.controls.Tree;
// data provider for role name[
Bindable] private vardata2: ArrayCollection;
// variable to store the node that is dragged from a tree
private var draggedItemOfAccessTree:XML = null;
private var draggedItemOfExclusionTree:XML = null;
private var dragItemAccess:DisplayObject =null;
private var dragItemExclusion:DisplayObject =null;
// Array to store the Role list[
Bindable]public varcountries: Array = [{id: 0, name:
"Role 1"},{id: 1, name:
"Role 2"},{id: 2, name:
"Role 3"},{id: 3, name:
"Role 4"},{id: 4, name:
"Role 5"},{id: 5, name:
"Role 6"},{id: 6, name:
"Role 7"},{id: 7, name:
"Role 8"},{id: 8, name:
"Role 9"},{id: 9, name:
"Role 10"},{id: 10,name:
"Role 11"}
// this event is called when we begin dragging a node in a tree
private function onAccessListDragEnter( event:DragEvent ) : void{
event.preventDefault();
vards1:DragSource = event.dragSource;
var items1:Array = ds1.dataForFormat("treeItems") asArray;
if (items1 != null && items1.length > 0 && (items1[0] isXML)){
draggedItemOfAccessTree = items1[0];
dragItemAccess = items1[0]
asDisplayObject;}
DragManager.acceptDragDrop(UIComponent(event.currentTarget));
private function onExclusionListDragEnter( event:DragEvent ) : void{
event.preventDefault();
vards2:DragSource = event.dragSource;
var items2:Array = ds2.dataForFormat("treeItems") asArray;
if (items2 != null && items2.length > 0 && (items2[0] isXML)){
draggedItemOfExclusionTree = items2[0];
dragItemExclusion =items2[0]
asDisplayObject;}
DragManager.acceptDragDrop(UIComponent(event.currentTarget));
private function onAccessListDragOver( event:DragEvent ) : void{
event.preventDefault();
varvar1:Number = AccessTree.selectedIndex;
varvar2:Number = ExclusionTree.calculateDropIndex(event);
var node1:XML = AccessTree.selectedItem asXML;
var node2:XML = ExclusionTree.calculateDropIndex(event) asXML;
//restrict drag & drop to nodes within same parent
if(draggedItemOfAccessTree.parent() == node1.parent() || draggedItemOfAccessTree.parent() != node1.parent()){
DragManager.showFeedback(DragManager.NONE);
//return; }
elseDragManager.showFeedback(DragManager.MOVE);
private function onExclusionListDragOver( event:DragEvent ) : void{
event.preventDefault();
varvar1:Number = ExclusionTree.selectedIndex;
varvar2:Number = AccessTree.calculateDropIndex(event);
var node1:XML = AccessTree.calculateDropIndex(event) asXML;
var node2:XML = ExclusionTree.selectedItem asXML;
//restrict drag & drop to nodes within same parent
if( draggedItemOfExclusionTree.parent() == node2.parent() || draggedItemOfExclusionTree.parent() != node2.parent()){
DragManager.showFeedback(DragManager.NONE);
// return; }
elseDragManager.showFeedback(DragManager.MOVE);
private function onAccessListDragDrop( event:DragEvent ) : void{
event.preventDefault();
varSindex:Number = AccessTree.selectedIndex;
varEindex:Number= ExclusionTree.calculateDropIndex(event);
var Enode:XML = ExclusionTree.selectedItem asXML;
var Anode:XML = AccessTree.selectedItem asXML;
if((draggedItemOfAccessTree.parent() != Anode.parent()) ){
AccessTree.removeChildAt(Sindex);
ExclusionTree.addChildAt(dragItemAccess , Eindex);
// AccessTree.rdataDescriptor.removeChildAt(Anode.parent(),draggedItemOfAccessTree,Sindex);
//ExclusionTree.dataDescriptor.addChildAt(Enode.parent(),draggedItemOfAccessTree,Eindex); }
private function onExclusionListDragDrop( event:DragEvent ) : void{
event.preventDefault();
varEindex:Number = ExclusionTree.selectedIndex;
varSindex:Number = AccessTree.calculateDropIndex(event);
var Anode:XML = AccessTree.selectedItem asXML;
var Enode:XML = ExclusionTree.selectedItem asXML;
if((draggedItemOfExclusionTree.parent() != Enode.parent()) ){
ExclusionTree.removeChildAt(Eindex);
AccessTree.addChildAt(dragItemExclusion, Sindex);
// ExclusionTree.dataDescriptor.removeChildAt(Enode.parent(),draggedItemOfExclusionTree,Eind ex);
// AccessTree.dataDescriptor.addChildAt(Anode.parent(),draggedItemOfExclusionTree,Eindex); }
private function onDragComplete( event:DragEvent ) : voidYes, I have set dragEnabled and dropEnabled to true. I trying to put restriction on dropping the node(aka leaf) of 1st free tree inside the branch(aka folder) of the 2nd tree. If something is dragged from tree1, it should be dropped only on tree2 i.e., dragged node should be appended at the end of tree2 and not inside nay of the branches of tree2. This functionality should work on both the trees. I'll be glad if u can provide the solution.
-
I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?
"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.
-
TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa
Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa
Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden
Maybe you are looking for
-
Adobe Acrobat 9 Pro - Corrupted Fonts In PDF
I am hoping that someone can help with this issue that I am having. I have been using Adobe Acrobat 9 Pro for most of the year without any issues until recently. When I have been creating PDF from Internet Explorer 9, some of the text in the PDF is c
-
hi all, can anyone please tell me how can i identify a check payment in table regup and reguh? what is the doc type for check payments? thanks, Mirit
-
ClassNotFoundException at weblogic.xml.schema.binding.util.ClassUtil!!
Hi, We are getting below exception everytime we are starting the weblogic 10 server. This is coming in clustered as well as non-clustered environment. Full stack trace is as below:- <03-Oct-2009 12:24:19 o'clock BST> <Notice> <WebLogicServer> <BEA-00
-
Adobe Flash Player Download Center-Not Available
Adobe Flash Player Download Center not working.... some kind of problem with Adobe Servers >> ? mac OSX 10.4.11
-
Hi, I have just tried downloading the Facebook app, but the app store has frozen. It will not let me click on anything. Shall I try turning it all off and back on again? Or is there something else I need to do. Thanks, Rebecca