RRA:URL profile option is missing

how to restore the RRA: URL profile option , for us one issue came when open viewlog error come like FS-CANT OPEN TEMP FILE , in forum said like restore the RRA:URL profile option and load it, we checked our profile option RRA:URL is missing, so please give suggestions
Edited by: 912306 on Feb 6, 2012 9:28 PM

Why do you keep creating duplicate posts? -- https://forums.oracle.com/forums/profile.jspa?userID=912306

Similar Messages

Camera Profile options suddenly missing in Lightroom...

Okay... so I noticed yesterday that (for some reason) my camera calibration profile options have disappeared, and my only option is "Adobe Standard". I used to have all the others (camera standard, camera standard 2, adobe standard 2, ACR, etc), but they have vanished.
I'm running Windows 7 32bit.
I thought maybe it was just Lightroom 3.5, so I un-installed and re-installed... no luck.
I un-installed 3.5 and re-installed 3.4.1.. no luck.
The camera profiles are in the proper directory (based on other forum posts I've found)... no luck.
I've tried removing the camera profiles from the directory and re-installing... no luck.
Not sure where they went, or what happened, or how I can get them back. Colors just aren't the same without them
Any ideas? I searched for hours on different forums and support sites, with no avail... Am I missing something? Is there another software besides Lightroom that needs to be installed? I'm out of ideas.
Cheers.

The list of profiles displayed is dependent on the camera used to shoot the image. Typically, cameras from Nikon, Canon and some Pentax will have a range of profiles whereas others vendors (e.g. Sony, Panasonic and Olympus) will only have Adobe Standard. I suggest that you check which camera model is showing fewer profiles than you expect and report back. Someone will then be able to tell you whether it's got a a full or limited range of profiles.

Profile option missing from Settings General

I have an iPod Touch 4th Gen. I just notice that "Profile" option under Settings > General is missing. How do I add this?

I had this problem too.I know it says the problem had been solved,but it didn't help me in any way with my problem.For the people who really look for this problem i have the answer.
THERE IS NO PROFILE.THE ENROLLMENT IS JUST A COOKIE!!!!!!!!!
The profile is deleted by it's self ,is just another way to add a cookie ,for the website or app to recognize your device.
So don't search for anything.If you want to delete it go to Safari>Clear Cookies.

"Anyconnect client profile" option missing in ASDM

Hello,
I'm in the process of setting up Anyconnect on the ASA, and have successfully updated the licensing, as well as uploaded the anyconnect pkg for web deployment. I enabled anyconnect on the outside interface and can now have the ASA push the client to the machine. Works fine. However, I want to add backup servers that the client will attempt to reach in the event the primary is down. I understand that "client profiles" can be created to customize settings like this. Problem is, when I follow the configuration guide with instructions for making client profiles at this location:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/ac02asaconfig.html#wp1289905
It shows that I should have an option for Anyconnect Client Profile and Anyconnect Client Settings.
I don't have either of those options in ASDM. Here's what mine shows:
I have another "SSL Client profiles" option, but it doesn't seem the same as the options above.
Can someone assist with what I need to do to get the Client Profiles option to be available so I can add backup server information to the client? Thanks!

Thanks for the response Marvin,
It shows the ASA and ASDM versions are 8.2 and 6.2 respectively.
Result of the command: "sh version"
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Result of the command: "sh act | i Ess"
AnyConnect Essentials : Enabled
I don't have the premium license, just the Anyconnect Essentials and Mobile licenses. I would imagine essentials should have the same profile configuration options, though. If it is in fact because I'm running an older version of ASDM, do I need to update both the ASA IOS and ASDM together, or can I just upgrade ASDM on its own? Thanks again.

Does FND:Developer Mode Profile Option changes requires apache bounce?

Hi All,
Am getting the following warning message in one of my page. Observed that, the profile option value FND: Developer Mode in the instance is Yes. I have changed it to NO since the recommended settings of this profile option is NO as Oracle stated in the Developer Guide. But, still am getting the warning message. Does this change require apache bounce or am I missing anything to get rid of error?
+++
Query has exceeded 500 rows. Potentially more rows exist. please restrict your query
+++
Note: I have checked all the VO in this page, but, none of the query behaves returns more than 500 rows. None of the VOs executed blindly.
Regards,
Soorya

Saurabh,
I got a clue on this issue. Not sure, will it be helpful.
User clicks on the base page link, which takes him to details page. When i redirect the user from base page to details page, am setting the retainAM value as Y as one of the parameter of the link url.
Am getting the warning message when the value of retainAM is Y. If it is N, it is not throwing the warning message. Any idea, what could be the reason?.
I feel, it might execute the VO's in the AM. Is my guess make sense?
Regards, Soorya

Profile option to be set to view About this page link

Hi All,
I am working in OAF 5.7h.Kan anyone tell me da name of the profile option that needs to be set for being able to view the About this page link in the footer of all pages.
thanks in advance

Probably the page you are looking at is a JSP page and not a OAF page which explains why you are not getting the link. Could you please provide the URL you see when you are on the page.
--Shiv

Language specific profile options.

Hi Gurus,
In our EBS R12.1.2, we have 4 NLS Languages, For all these languages I want to have default NLS_DATE_LANGUAGE=AMERICAN. Is there any profile option or environment variable which I can define to make it happen.
Thanks for reviewing,
-Samar-

For English == NLS_LANG=AMERICAN_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&NLS_DATE_LANGUAGE=AMERICAN&NLS_SORT=BINARY&&VIEWER=&
For Spanish == NLS_LANG=SPANISH_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&NLS_DATE_LANGUAGE=SPANISH&NLS_SORT=BINARY&&VIEWER=&
Once users are loggin into the spanish perefrences, if they enter any date for any form/report, the are getting error on wrong date format, If I modify the URL , every things working == NLS_LANG=SPANISH_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&*NLS_DATE_LANGUAGE=AMERICAN*&NLS_SORT=BINARY&&VIEWER=&

Assigning the profile options of Oracle Diagnostic tool of R12

Hi
Could anyone please ellaborate the profile options for RDA (Oracle Diagnostics) like Default timeout used by OSUtility,Sleep time used in OSUtility,Time out used by OSUtility and Time out used by OSUtility to get environment details.
If possible please sugest the way to assign the values for these profiles.
Akshaya

Hi,
Create a profile under Application Developer Responsibility as follow:
Name OAE_LAUNCHER
Application <whatever>
User Profile Name Oracle Application Express Launcher
Description Oracle Application Express Launcher
2. Set above profile value under System Administrator Responsibility -> Profile -> System, and search for the ‘OAE_LAUNCHER’.
Set the value at Site Level as:
http://<hostname>:<Apex port>/pls/apex
Then instead of hardcoding the URL in the jsp, just give the profile name OAE_LAUNCHER that you have just created in the jsp.
Hope this helps you
Brgds,
Mini
If this is helpful or correct, assign points promptly.

T400 - Intel Chipset Video - Doesn't have profile option

I'm having issues with a laptop not remembering the settings when she docks sometimes. The problem is, her setup is different than most and requires a fair amount of setup to complete. The T400 doesn't appear to have a "save a scheme or profile" option. Am I blind and just missing it, or did they actually forget to include this function?

You may be on earth but we won't know which operating system you're runing and service pack level. You should outline your machines hardware outline in detail. Assumptions rarely lead to a resolution. This is a couple of generations back. Are you using the original installation that came with or changed clean installing something else.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

MRP: Purge Batch Size Profile option

The Longest running planning ODS Load worker was performing delete operation on MSC_Operation_Components and inserting data in to the same table.
I find the MRP: Purge batch size profile option was used by ODS Load Worker.
My question is: Currently the profile option value is 75000. To see if the performance is any better in our test instances, increased it to 350,000. On the first run the runtime performance of the ODS Load worker improved from 69 minutes to 31 minutes. We allowed the profile to stay put to check the performance for a week.
The performance of the ODS Load worker clawed back to 69 minutes. Consuming the same runtime when the profile option was set to 75,000.
What am I missing here? why the profile option is not giving consistent results.
Any tips would be helpful.

Dear PP watson,
1.While giving the PIR's in MD61,after entering the values click on the schdule line tab page and then in
the top menu click on settings--->prod.version,now against the PIR enter the prod.version whould be
considered.
So this will be considered during MRP run.
2.IF 2 prod.versions exists for the same lot size and validity dates then the system always picksup the
first prod.version during MRP run.
3.IF you want the system to consider the second prod.version,then lock the first prod.version before
taking MRP run.
4.If quota is maintained in MEQ1,then as per this you will get the output in MRP.
Points 2,3,4 is generally used if PIR's are assigned without any prod.version.
Come back with your queries.
Regards
Mangalraj.S

Value of profile option, ICX: Requisition Sever(ICX_REQ_SERVER)

Hi,
I need to know how do we find out the value to be stored in the profile option, ICX: Requisition Sever(ICX_REQ_SERVER). The value currently we have in our client instance seems to be wrong.
My requirement is to prepare a URL to access a SQL Loader's bad file. While clicking on the URL should open the bad file from the interface directory in the UNIX server.
Please comment.
Regards,

Hi,
There are many scripts available, please see these documents for details.
Note: 470102.1 - How To Check If a Profile Option Is Set In Oracle Application
Note: 201945.1 - How to list E-Business Suite Profile Option values for all levels using SQLPlus
Note: 282382.1 - How to Search all of the Profile Options for a Specific Value
Note: 367926.1 - How To Find All Users With A Particular Profile Option Set?
Note: 282382.1 - How to Search all of the Profile Options for a Specific Value
Note: 803587.1 - Script To List The Values Of A Profile Option At All Levels
Thanks,
Hussein

About hrms profile option

HI,
i want to make my HRMS profile option (HR:SECURITY PROFILE) not to be updateable.for that what i ve to do.plz help me out .it's urgent.

Probably the page you are looking at is a JSP page and not a OAF page which explains why you are not getting the link. Could you please provide the URL you see when you are on the page.
--Shiv

Not able to get the profile option value

Hi,
Not able to get the profile option value after i changed the new value in the application.
I am using fnd_global.apps_initialize to initialize the apps from PLSQL code to get the updated profile option value. But fnd_profile.value is not getting fetched the updated value. Still it is fetching the old one. I mean it is stored in database cache. Please any one let me know how to get the new value every time after i changed the value.
Thanks

What is the application release?
Is this a custom or seeded profile option?
Can you confirm that the value got changed from the application (query the profile option and verify the value)?
Can you reproduce the issue if you use an API to update this profile option as per (How to Change Profile Option Value Without Forms? [ID 943710.1])?
Thanks,
Hussein

To generate xml code in encoding as specified in system profile options

Hi,
i have a customer bug wherein the report page which is generated after a particular process, which is a .xml file, does not open because we have special characters which are not getting encoded properly!..
the probable solution to this would be to encode the .xml file in the encoding format specified in system profile options.
After the content generation the following code is used to generate the tags and the .xml page:
DBMS_XMLGEN.setRowSetTag(l_qryCtx,'INVOICE_SET');
DBMS_XMLGEN.setRowTag(l_qryCtx, 'INVOICE_RECORD');
DBMS_XMLGEN.setBindValue(l_qryCtx,'BATCH_ID', p_batch_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SUPPLIER_ID', rec.supplier_id);
DBMS_XMLGEN.setBindValue(l_qryCtx,'SITE_ID', rec.site_id);
l_result_clob :=DBMS_XMLGEN.GETXML(l_qryCtx);
l_result_clob := substr(l_result_clob,instr(l_result_clob,'>')+1);
l_temp_invoice_count := DBMS_XMLGEN.getNumRowsProcessed(l_qryCtx);
l_invoice_count := l_invoice_count + l_temp_invoice_count;
DBMS_XMLGEN.closeContext(l_qryCtx);
clob_to_file(l_result_clob);
here we have a transaction type in portugese like Nota de Crédito
and the issue summary is as follows
It contains some foreign language symbols which are not encoded in UTF-8 format hence IE is showing the error. Even though in mozilla the file is completely opened but the same foreign language symbol is not shown. So the error exists in all the browsers.
can you please suggest how the encoding maybe done so as to avoid the above problem!...
and also how to include the encoding as per mentioned in the system profile options.

Hi,
>>>The XSD doesn't have any messages only simple and complex types - I can't seem to relate (via drag and drop) them to a data or message type to generate the required objects.
maybe it has some reference inside to some other types which you did not get?
if so you need to import into IR/ESR all files and put the correct reference (external archives)
this would be the proper way to get the file generated according to the xml schema
Regards,
Michal Krawczyk

How come the switch user option is missing from my lock screen?

I upgrade to Lion my iMac Core 2 Duo and now when I lock the screen the switch user option is missing from the lock screen, you just have to cancel o renter as the original user, so that if another member of my family wants to switch and use the mac he or she cannot do it.
This is what I am talking about (image taken from a lion review): http://dl.dropbox.com/u/134544/forum/Schermata%2007-2455766%20alle%2011.05.12.pn g
The switch user option is totaly absent, I just have the cancel.
It that a bug or what?
Please note this happens only when I lock the screen from the screensaver, i.e. requesting the password to restart from the screensaver, if I get to the login windows all users appears correctly and people can switch back and forth.
Thank you.
– cordialmente,
tiziano solignani, da  Mac
http://ts.solignani.it (splash)
http://goo.gl/p6Sb0 (libri)

I just talked to apple support. They said Lion doesn't support this feature. They gave me a work-around, which was to disable requiring a password in the screen saver. Then enable user switching so it appears in the top right of the banner. Note that since the screen saver no longer locks the screen, in order to actually lock the screen the user must click on the upper right user list and select something like "Login user...".
This issue has left me disappointed with apple for a few reasons. Hopefully someone at apple will take note:
1. Apple removed a useful feature.
2. Apple did not provide a response to this thread which would have been the best forum to inform users of this change. It would have saved me and apple one long phone call.

RRA:URL profile option is missing

Similar Messages

Maybe you are looking for