RRAS VPN performance and Internet access which connecting to RRAS VPN

For the first time, I setup win2008R2 RRAS VPN(L2TP and SSTP ) in Azure VM for my client.
I am running Package Application which include SQL2008 in that VM.
I plan that remote user connect from client application using RRAS VPN to Application server in Azure VM.
But I am worrying about the performance bottle net due to network speed reason.
I am not yet make sure network environment of my client ( my client is living in USA ).
1
But if we decide to use RRAS VPN for that application , which kind of VPN(PPTP,L2TP,SSTP,IKE) will be better in network speed?
2
I noticed that which connecting to RRAS VPN, I could not connect to the Internet from remote client PC.
Is there any way to enable RRAS VPN access and Internet access at same time ?

Hi,
1. PPTP is the easiest protocol to use for setting up VPN. And it have minimal security.
L2TP/IPSec, SSTP and IKEv2 was more security than PPTP.
IKEv2 can provide a secured uninterrupted ubiquitous VPN connectivity.
Here are good article about comparing four types of VPN,
Different VPN tunnel types in Windows - which one to use?
http://blogs.technet.com/b/rrasblog/archive/2009/01/30/different-vpn-tunnel-types-in-windows-which-one-to-use.aspx
2. Two common scenarios cause the problem that connected client can’t browse the Internet. First, the VPN server might not let remote clients access the Internet when they have a connection. In this case, when we close the VPN connection,
the client can browse the Internet because the default gateway reverts to the gateway that ISP defines. Second, Windows might overwrite the ISP gateway with the VPN server-defined gateway when the client connects, so the client has no path to the Internet.
We may need to uncheck the use default gateway on remote network to solve this problem.
Best Regards,
Tina

Similar Messages

"No Internet Access" on connected device with mobile hotspot

I've been on Verizon for 2 weeks. Note II on a Family Share Plan with lots of data. Using the built-in Verizon Mobile Hotspot application. Connecting from my work laptop, which is Windows 7.
Set it up and everything worked fine for a week and a half. I had no problems connecting or accessing the internet from my laptop. It worked fine Monday morning. Monday afternoon my laptop started giving me the warning message "No Internet Access" when connecting to the phone's hotspot. I'm in a 4g area where the hotspot has worked previously. I've tried several times in several different 4g locations as time allowed over the last 2 days, and I have not been able to get to the internet on my connected laptop again.
While connected to the mobile hotspot I ran Windows troubleshooter and it tells me that there is no DHCP server available, and that the default gateway for this network is unreachable. My laptop has no problems reaching the internet via the wireless network at work or at home. The laptop connects to both of those wireless networks every day (both before and since this problem appeared.)
I have rebooted both the phone and the laptop, with no change in the problem results. I renamed the hotspot, and connected to the "new" hotspot from my laptop, with no change in the problem results. I have tried running "ipconfig /renew" from my laptop while connected, and that is when it tells me that it cannot find a DHCP server for this network.
What broke? How can I fix it?
I'm still in the 100% refund return period on my contract and phones (for another day or so.) This is an absolute deal-killer. Hotspot on my phone is the single reason why I switched networks.
* Revised 2/28:
This morning I turned on the mobile hotspot feature on my wife's Galaxy S3 (on the same Verizon Family Share Plan.) Then I connected to it from my laptop. When it connected it said "limited internet access" for about 30 seconds, and then that warning went away and I had full access. I surfed for a moment to confirm, and all was working. I turned off the GS3 hotspot and turned on the hotspot on my Note II. When I connected to the Note II's hotspot from my laptop I still had no internet access. I left it for 3-4 minutes, and it never switched on. I tried surfing and got only error messages in my browser.
All of this was while sitting at my desk. So I believe I have ruled out the laptop as a cause for this problem.
Thanks in advance,
Randy

After I posted the above in February I talked to Verizon support. They could not resolve the problem. They replaced the phone, and the new phone has worked for months. My work schedule changed a bit, and so I started using the hotspot less often.
Last week I noticed that after I connected my laptop I had a longer delay before it would change from "No Internet Access" to giving me access. Yesterday morning it was so slow that I got the command prompt up on my laptop and determined that from the laptop's perspective the problem was that there was no DHCP server available through the hotspot network. That morning it did eventually find the DHCP server and issue my laptop an IP address, and let me connect.
Yesterday afternoon the DHCP server never appeared, and I was not able to connect to the internet. Same thing this morning. I rebooted both the phone and the laptop. No change. The laptop connects to other wireless networks just fine, still. This worked for months. Why did it slow down connecting and then stop? I'm guessing there must be some sort of buffer that has filled up.
Anyone have any ideas?
Thanks in advance.

Need Help with Laptops and Internet Access

I have been having difficulties during the past week with my internet access. I had been using FIOS for a couple months with few problems. Initially, I thought the problem was related to thunderstorms that passed thru our area a week ago, and wondered if the router had been damaged during the storms. But now I suspect it may be a more pedestrian issue with the computers' settings.
I have the Actiontec M1424WR router. With the power on, the power, internet, coax, and wireless lights are glowing and green. I have tried rebooting the router, and have used the various "fix my connection" and optimizer tools available from online support here.
We have 4 PCs in the home, all with wireless adapters. Two are desktop PCs, the other two are an HP (XP) and a Dell (Vista) laptop. I am generally able to get internet access on the desktop PCs, since these have linksys wireless adapters with the linksys utilitiy installed, and I have a profile created in the linksys utility that usually works fine with the desktop units.
But there is no such utility for the laptop units with their built-in adapters, and I must use Windows services to connect to the network and the internet. I can sometimes find available networks with the Windows services, and connect to the network manually. But many times, the SSID for our network will not be listed as avaialble, and at other times, the Windows service says that I have a network connection, but it will not connect to the Internet. And even when connections are made, they will intermittently be dropped.
Is there anything I can do to make the network and internet access for these laptops once again reliable?
Thanks,
Rich
Solved!
Go to Solution.

Here is the possible scenario:
Your router was configured correctly, and all was working well.
Thunderstorms knocked out power, and your router reverted to it's original setting ("automatic channel selection").
Now you have intermittent connectivity due to the change in configuration.
When you go into your router to change the channel, check to see if there is an option to "keep current channel settings after power cycle". If so, check that box.
Brian K
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Please Help me in Labview and MS Access Database Connective

Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
thanks in advance .

duplicate post

Just got a new iPad 2. 64 GB. It will connect to wifi and facetime works, but email and internet won't connect. Suggestions? Thanks!

Just got a new iPad 2. It is 64 GB. It will connect to wifi no problem and facetime works, but email and internet won't connect.
Suggestions?
Thanks!

If facetime works, then the internet IS connecting.

Vpn connected to Pix but no Internet Access after connection

Hi,
We have just changed over our firewall to a Pix 515. The VPN Client (4.6) has been set up and remote users can connect ok and authenticate using Windows IAS. However, once they connect to the VPN they can no longer surf the internet. Our support company are saying that this is impossible because it can cause spoofing. Is this really impossible on the Pix? Is there a way that the remote user can surf the internet via their local connection when connected on the VPN?
Many thanks for looking.
PJ.

Hello,
It is possible to connect through Cisco VPN client while keep using the internet. You have to use something called Split Tunneling. Below you can find a link how to configure split tunneling:
http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172787.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
Hope this helps,
Appreciate your rating,
Regards,

Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

6310i and INTERNET - problem to connect!

Hello! I have a 6310i (pretty old, I know...) and I am trying to connect to internet, but in vain! I am using a pocket pc which connects -successfully- with the 6310i but when calling the Vodafone appropriate number from the pocket pc, the 6310i does not connect to internet! Any ideas why? By the way, I am using a data SIM card from Vodafone just for sending data to an internet server, my intention is not to do browsing or anything like it. I used the SIM card with a Sharp GX29 and it worked in a second. Someone from Vodafone indicated that the 6310i is pretty old to connect to internet. Is this the answer? Much obliged for any advice!

What is the IP address that your PowerBook is getting
from the AEBS? Does it start with 169? This indicates
that it did not properly communicate with the AEBS's
DHCP server.
Do you by chance have the access list feature enabled
on the AEBS? If so, did you add the MAC address of
the PowerBook's AirPort card to the list?
the infamous 169 IP address. yes, that is what it is showing right now. i do not have the access list feature enabled (i'm not even 100% sure what it is, but by looking at the configuration i think i could tell). i did, however, end up doing a hard restart of the AEBS and re-configuring it, with the powerbook, with no luck at all.

All my apple device has no internet access after connect to my house's wifi.

After connecting my apple ipad to my wifi, it show that there is no internet access. But my laptop can connect it and also use my wifi with internet access. My router is Wireless-G. Why can't I use my wifi????

Hi nkarthikeyan ,
You're right, in the behind configuration, there aren't any NAT configured for the simple reason which's Firewall is on production on another site and users must to connect to our Intranet to working properly so until I found a solution, I do some tests only with one desktop located on site...
I tried to add this command on my configuration but when I do it, I lost connection with computer of my site of ZAG ...
ASA5505-ZAG(config)# nat (inside,outside) source dynamic any interface
Also, I tried this configuration but without success also :/
for no-nat
object network ZAG_L2L
subnet 10.90.0.0 255.255.255.0
object network Trafic_vpn_MainSite_L2L1
subnet 10.239.80.0 255.255.248.0
object network Trafic_vpn_MainSite_L2L2
subnet 10.239.88.0 255.255.248.0
nat (inside,outside) source static ZAG_L2L ZAG_L2L destination static Trafic_vpn_MainSite_L2L1 Trafic_vpn_MainSite_L2L1
nat (inside,outside) source static ZAG_L2L ZAG_L2L destination static Trafic_vpn_MainSite_L2L2 Trafic_vpn_MainSite_L2L2
And to finish my questions, can you explain me this point please :
Also you need to place your real ip address in interface ACL's instead of NATed ip address...
Thanks for your support !
I really appreciate it !

No internet access when "Send All Traffic" VPN Checked

Hi Ladies and Gents
Wonder if you can help me. These past few days I have been setting up a VPN on my DD-WRT enabled router. I have successfully accomplished such task, however when I'm connected to the VPN on my phone my public IP address does not change, after doing some reading I believe that is because "Send All Traffic" is unchecked in the VPN profile, but when I check "Send All Traffic" I get no internet access what so ever.
Any advice/input/solution to this would be greatly appreciated.
Cheers
Cameron

Cammy1230 wrote:
when I'm connected to the VPN on my phone my public IP address does not
it's not supposed to.

WD My Book NAS drive, Cisco VPN router and FTP access

Hello:
I have a Western Digital My Book World Editon II NAS drive that is connected through a Cisco ASA 5500 VPN router.
This NAS drive has a service to use it as an FTP server using port 21 as default or other specific port.
I also have a XP PC in which I installed Filezilla where I am trying to access the NAS files.
Only problem is that Filezilla apparently connects to the NAS drive but it lists the directory as empty.Changing to Active mode makes no difference.
Does this sounds like a problem with the VPN configuration?
Do I have to configure some kind of port forwarding on the VPN router for port 21?
Or does the VPN router has nothing to do with this problem?
Thanks for your help

Would you "Solve" this question please ?

Able to connect ipad 2 to iphone 4s personal hotspot via bluetooth or wifi, but no internet access when connected via wifi.

I am able to connect my ipad 2 to an iphone 4s personal hotspot via bluetooth or wifi. The problem is that I only have internet access with a bluetooth connection. Both are running ios 6.1.2 and I have tried to reset both to factory settings. Any suggestions would be reatly appreciated.

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

Problem with VPN Client and network access

We are running VPN client 4.0.1 on our laptops, and there are a number of users who are getting documents they are using on the internal network (off VPN) corrupted. The initial cause seemed to be the stateful firewall, but I have that turned off, and we are still getting it.
It only seems to be on the machines with VPN client installed, and it is only happening when the user is working on a file direct from the network drive. They are not connecting via the VPN client when the problem occurs.
any suggestions?
William.

Did you get any joy with this ? We seem to be having the same issue.
Thanks

Crystal Reports and Sharepoint Access Services Connectivity

How do I establish a connection between Crystal Reports and an access database hosted on a Sharepoint Access Services site? I've searched the forums but can't find any guidance.
Thanks in advance,
Angela

Hi Angela,
Through an ODBC connection is about the only way, how to configure it would be up to Share Points help file to describe if it supports it.
Don

No internet access when connected to wifi?

that my poxy is not correct

Hi @chuy1 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and issues with the Wireless connection. Here is a document to troubleshooting Wireless Network and Internet Windows 8, if you need it.
Here is a document on Airplane mode. It shows you how to turn on your Wireless adapter.
If Airplane mode is on you cannot use your WiFi or Ethernet, so Airplane mode should off for the Wireless troubleshooting.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

RRAS VPN performance and Internet access which connecting to RRAS VPN

Similar Messages

Maybe you are looking for