RRB- Quantity from Project and rate from sales order

Hi All,
I got scenerio in my project where project is having resource related billing. Now ap per the client requirement, we have a sals order and projects. All prjects are software projects. Now my requirement is client is looking for a system there billing can be done at projet and resource level. which means if project is having 50 confirmed hours. In - dp91 one debit memo requiet should be created with 50 hours and rate should come sales order.
Means if on a project 50 hours has been confirmes than in debit memo  request 50 hours should come from the prject and rate to be billed should come from sales order.
Kindly suggest.
Regards
Abhishek Sinha

Dear Virendra,Abhinay & Gokul,
Thanks a lot for giving guidance. As per conversation above i can feel that we can overwrite the rates from project to condition records in SD. Is there any specific condition type made for RRB as my SD consultant never worked on RRB scnerios. Again reconfirming, in my current system at the time of debit memo request sytsem is taking all cost from project for billing but i want that system should take the confirm actual hours from proect and rates to bill them from SD.
Once again thank a lot for showing interest. Sorry for replying late because of different time zone.
Regards
Abhishek Sinha

Similar Messages

  • Delivery from Project for the Assembly: sales order item

    Hi,
    When I create a sales order lets say for material "A".
    And I want to deliver this component from sales order. With Production order.
    I have attached the material "A" in Project to an activity with a positive quantity, in MD04 I am unable to see the planned order for that.
    Project is released and it has created a order reservation but i am unable to convert it into the Planned order how it can be achieved.
    Material is not relevent for the MRP.
    Please suggest some solution.

    Hi,
    Please run project MRP (MD51), selecting option 3 (planned orders) against create P.req. field under MRP control parameters tab.
    Planned orders will be created automatically & u can see in MD04 also.
    Thanks
    Kishore

  • Delivery from Project with reference to sales order

    Dear All,
    I am facing problem in delivery. In my case scenario is-
    1. There are 10 materials with 20 quantities.
    2. I create a sales order only for two material with 5 quantities and enter wbs element number.
    Now when i use CNS0, enter sales order number and wbs elelment number system shows all 10 materials that I dont want means I want the materials that are included in sales order. Please help me how to control this.

    Please read SAP Help for a better under standing...
    I mentioned below a line from SAP help for your info.
    ...... it selects material components, the system takes components into account that have been assigned to either a network or ...... ...
    Please follow the below path to access the help..
    SAP Help Portal >>> Logistics >>>> Project System >>> Material >>>> Delivery from Projects......

  • HT6012 While trying to update projects and events from a previous version of iMovie to iMovie '11, someone forced iMovie to quit.  Now when I start iMovie '11 and try to update, a message says no projects or events can be found?  Any suggestions?

    While trying to update projects and events from a previous version of iMovie to iMovie '11, someone forced iMovie to quit.  Now when I start iMovie '11 and try to update, a message says no projects or events can be found?  I know there are previous projects and events, and they definitely have not been updated because they do not show up in my iMovie'11 library, events, or projects.  Any suggestions?

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • How to restrict the user from making any changes in Sales order- item level

    Hi to all
    How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
    Regards
    Anish Parikh
    Edited by: anish parikh on Jan 24, 2008 5:16 AM

    Hi Anish,
    This can be achieved through the roles and authorization.
    This can be done through the basis team. they can create user profiles and roles.
    For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
    Like that ur requirement can be done.
    Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
    Hope i answers.
    Reward points if useful.
    Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

  • I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

    I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

    I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
    As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
    At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
    Do you know how to uninstall a CFX plugin in iMovie?
    NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

  • COPA : Drive Item Category from billing doc. / without sales order

    Dear All ,
    I need to drive item category directly from billing document ( billing without sales order - POS inbound doc. )
    i tried to drive it from table VBRP but the derivation failed as table VBRP need the billing doc. number & i can't get it from COPA
    POS does not create any sales order , the in coming inbound doc. create billing directly ( billing type : FP  ).
    Edited by: Ahmed Hassan on May 25, 2011 2:28 PM

    Hi Jat
    This is not the screen I  am looking for .Please go to condition tab and look for Analysis .Let me know on what excess you are looking system to find your pricing .
      Below are are reference for u.
    Regards

  • Copy mode of payment from customer master data to sales order,

    Hi Gurus,
    Hope all is fine.
    I have a small doubt. If we want to transfer the mode of payment from customer master data to sales order, do we have to use Exit- MV45AFZZ.
    Can't we transfer the data without the exit?

    Hi,
    I have tested this in sand box.Thought the customer master is having payment method ( payer ) ,It is not copying from customer master to sales order but if you maintain manually in sales order ,it is copying into billing document level.FYI see below snap shot.
    Note:If you want it from customer master into sales order,may be you need to take help of abaper on this.
    BR's,
    Naren

  • I bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me

    i bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me !!?

    Your iPad is syncd with iTunes on your computer and your iTunes account controls what's in your iPad.   Previously it must have been sync'd with another person's iTunes account in which case you need to completely clear it out to make it your own.
    Go to Settings > General > Reset (at bottom) > Erase All Content and Settings
    Then plug it into your computer and restore it with YOUR iTunes account.
    Or if your have an iTunes account already setup under your name with your own apps and media -
    Plug it into your computer, open iTunes if it doesn't open automatically and on your iPad page, click Restore
    Let it proceed.  Then the iPad will no longer be looking for someone else's account.

  • Somehow, I created 2 Appe ID's...1 from home and 1 from work.  I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

    Somehow, I created 2 Appe ID's...1 from home and 1 from work.  I purchased additional space on iCloud with one ID, but I need to transfer it to the other.

    Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID-  so I'm stuck. I have to learn how to manage that situation.
    This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.   
    It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

  • I Want To Transmit Audio from Mic and Video from WebCam.....???????????????

    I Want To Transmit Audio from Mic and Video from WebCam on Another Computer. I have used AVTransmit2.java file and AVReceive2.java file for Transmission and Receiving but They Transmit Only Video On Another Computer on a network without any error. Any One Help me How Can i Transmit both Audio & Video at the Same time ????????
    i m using This Command for Transmittion
    java AVTransmit2 vfw://0 192.168.0.1 192.168.0.2 10000
    and this Command For Receiving
    java AVReceive2 192.168.0.1/10000 192.168.0.2/ 10002

    Excuse me foro my bad English but I speak English like Tarzan.
    To trasmit both video and audio I created a MergingDataSource wich incorporates video and audio data sources. Then I created a Processor with this DataSource and a RTPManager for each track of the processor. It works.
    Stupendoman

  • Connecting from Office and Connecting from Remote

    Hello
    Can anyone tell me what is the difference between "Connecting from Office" and "Connecting from Remote" in the connection wizard ?
    Thank you in advance

    Hi Naldoo,
    Into installation of SAP BPC you are specifying for application server 3 names:
    Application Server Name
    External Application Server Name
    Virtual Name
    The third one is used in case if you are using NLB.
    The first one is the one using by "Connecting from Office"
    The second one is used by "Connecting outside of office"
    For this reason External name must be FQDN )Fully qualify name)
    Application Server name can be short name
    I hope this will help.
    Regards
    Sorin Radulescu

  • Hi, I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies. My goal is to have a unique source in my imac for my photos and movies. Thanks .

    Hi,
    I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
    My goal is to have a unique source of photos and movies in my imac.
    Thanks !
    Nicolas

    As  to iPhoto
    Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    For iMovie support please post in the iMovie forum
    LN

  • I'm receiving duplicate emails, one from icloud and one from yahoo

    I'm receiving duplicate emails, one from icoud and one from my yahoo, how do I fix this?

    Have you turned on a forwarding or copying service at yahoo?  The only way to get duplicate emails from two different email services is if one of them forwards and copies to another, or if senders are sending to both email addresses.

  • (261705413) Q RPCC-21 Can you compare a performance of "usual" RPC from EJB and RPC from Web Services?

    Q<RPCC-21> Can you compare a performance of "usual" RPC from EJB and RPC from Web
    Services?
    A<RPCC-21> There are additional performance overheads for invoking a web service
    when compared to straight EJB invocation. However, you should not think of web
    services as a way to replace your EJBs instead you should be willing to accept
    some performance decline for the massive gains in platform interoperability and
    the ability to exposure your services outside of you firewall.
    Additionally, performance decreases will be dependent on several factors. The
    most significant of which is the XML-Java and Java-XML translation of the SOAP
    message. This can be very fast if the XML structure is simple but if you web services
    requires a parameter that has a complex XML format you may see a more significant
    slow down.
    Adam

    Sorry if this sounds like I am new to this but I am.
    So, the extended version is the format that would be used if you were not utilizing the files that the wsdl2java function creates?
    And this is done to when you want more flexibiility for the user to call your service?
    So, you would push to have the stub files used when you want to control how the web service is used?
    thanks for the feedback.

Maybe you are looking for

  • Problem with save as option in version 10 or above

    Hi, I have created a pdf using pdfbox api which has links to go to a particular page in pdf. When a create a copy of this pdf using Save as option and open that copy pdf the links dont work in adobe reader versions 10 or above while they are working

  • How to display the values in the form based on another form option?

    Hi, I have two forms. Based on form 1 option the form 2 should display. Form 2 values are stored in a separate table consists of step_id and step_name For example: In a Procedure there are multiple steps(step1, step2... step n). If procedure 1 is cho

  • XML Deserialization Error

    Hi, I'm workin on a prototyp based on the netweaver developer studio preview. after i've steped to the several tutorial for webservices und webdynpro. I've implemented a ejb/webservice combination for selecting a insurance contract from our databases

  • Knowledge provider(Kpros) and sap content server.

    Hi Gurus, i need some details about Knowledge provider(Kpros) and sap content server. please provide the link.

  • Aperture Library from iPhoto

    As a new user of Aperture i do not understand the issues relating to transfer of an existing iPhoto library to Aperture. I do understand that Aperture does use an existing iPhoto library without the need for migration, but i did a test and migrated t