Rrdtool-1.4.3-1-i686: "This RRD was created on another architecture"

On an i686 system, rrdtool-1.4.3-1 is unable to read/modify rrd files (created by either earlier versions or itself); it yields "ERROR: This RRD was created on another architecture".
Edit: I thought I had a workaround but I don't, so I've opened a ticket here: http://bugs.archlinux.org/task/19359
Last edited by vesath (2010-05-04 19:26:24)

To use Oracle AS SSO with OID 11g you should look at Chapter 10 of the Identity Management Installation Guide. This is the pre-requisite for Oracle AS SSO 10g on OID 11g. To use OAM with Oracle AS SSO as well you need to provide IdentityProvider class for Oracle AS SSO. This is handled in the OAM 10.1.4.0 Integration Guide.
--olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

    In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

    use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

  • I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • "This document was created with an unsupported version of Excel. Only documents created with Excel '97 or later can be opened.

    I keep getting this message when I try to open an Excel file "This document was created with an unsupported version of Excel. Only documents created with Excel ’97 or later can be opened.

    You could try opening the Excel document with LibreOffice and then resaving it in a compatible version before opening in Numbers.
    Jerry

  • "This file was created by Oracle Reports. View this document in Page Layout mode" , how to avoid this text

    we print some RTF Files , we dont want to  print to paper  this text "This file was created by Oracle Reports. View this document in Page Layout mode"
    How to able do it.
    Tanks for reply.

    we print some RTF Files , we dont want to  print to paper  this text "This file was created by Oracle Reports. View this document in Page Layout mode"
    How to able do it.
    Tanks for reply.

  • I keep getting this error "This document was changed in another application" but I am not opening this doc in another application

    Pages 5.2
    OSX 10.9.2
    I have been getting this error (on keynote as well)
    "This document was changed in another application. To work on that version, click Revert. Changes you made here will be saved as a version on your Mac.  Tip: If you’re using an online storage service, avoid opening the same document on multiple computers at once"
    I am only working on this doc on my MacBook Pro (Ipad is OFF),
    not running pages on my phone
    not logged into iCloud in safari
    document saved to my hard drive (not iCloud or dropbox)

    Getting the same message. Started with the latest update a few days ago. So I guess it's a glitch in the current version and hope Apple will solve that soon by issuing another update which fixes that. It's really annoying and makes it quite impossible to use the application at all.
    Meanwhile open Pages, go to Pages, Provide Pages Feedback, choose Feedback Type: Bug Report and explain the problem in the Comments box.
    http://www.apple.com/feedback/pages.html
    I think that's all you can do for now. But it's important for people to report the problem since I don't know how closely Apple is monitoring these Forums.

  • This file was created with a newer version of Adobe After Effects

    I downloaded the trial version of Adobe After Effects last night and spent a lot of time learning how to use the product, created my first tracking face on a body in a video.
    This morning when I tried to open the project I got an error message: After Effects Error: this file was created using a newer version of After Effects [3.0 (unknown)] -- time to upgrade your application!
    What should I do?

    Sounds odd. If you created it in CS6 it should open just fine in that same version. chances are that the project fiel is simply damaged. Impossible to tell without actualyl seeing the file.
    Mylenium

  • When I try to enter a new calendar entry I get the following message: "This calendar was created by mail, you can't add events to a mail calendar" what does it mean? I never had this message before.

    When I try to enter a new calendar entry I get the following message: "This calendar was created by mail, you can't add events to a mail calendar" what does it mean? I never had this message before.

    Check which calendar you are trying it put this event on, then put it on the correct one.

  • When attempting to add a calendar event, I am getting the message "This calendar was created by mail..."  Not true!  How do I fix this?

    When attempting to add a calendar event, I sometimes get a message "This calendar was created by mail, etc." and I am unable to add an event. This is very frustrating.  Help!

    Reset it by holding the Power and Home buttons at the same time until you see the Apple logo, then releasing.

  • I get the message "Cannot open because this project was created with a newer version" whereas I do have the latest 2014 version installed on my PC

    To provide all the info, I have created this project on my Desktop with Mercury engine and I'm now trying to open it on my laptop on which I don't have a powerful graphic card - ad therefore no Mercury Engine. Could that be the problem? Thanks.

    Open Premiere on you desktop and your laptop and check the build which is under Help/About Adobe Premiere Pro.
    MPE has no part in this.

  • Message: This library was created with unreleased version of iPhoto. HELP.

    The message goes on to say, open in iPhoto 2 or 4 before trying to upgrade to 6. I have numerous Libraries on external RAID. All opened fine under 5.
    I certainly never had unreleased version of any Apple program, nor do I know where to get copy of iPhoto 2 or 4. ANY IDEAS? THANKS.
    G5/PB17/15/12   Mac OS X (10.4.5)   Too many toys/too little time

    HI DesperateMacWives,
    Does this happen when you try to open all the libraries or is it just one library giving you that message?
    There have been a number of posters here with the same message. so far I have no solution other than creating a new library from the old one.
    How many images do you have in your library?
    Do you mind losing albums, keywords, comments?
    If not...
    close iPhoto
    -drag the iPhoto Library folder to the desktop
    -launch iPhoto and create a new library
    -double click the iPhoto Library folder on the desktop to open it
    -the two main folders you will need to import are the Original folder and the Modified folder (only if you want to import the edited images).
    -the Originals folder has all your originals photos unedited. the Modified folder has all images that you have edited, rotated, cropped, etc.
    -Drag these two folders to the desktop
    -If you want to save the edited image, find it in the roll in the Modified folder and drag it into the roll of the same name in the Originals folder. It will replace the originals and now will be the original.
    -If you don't care to save any edited images, then don't import the Modified folder into iPhoto or don't bother replacing the edited image with the original image like I just described.
    -If you import the Originals folder into iPhoto you will have all your originals in their named rolls.
    -If you import the Originals and Modified folders into iPhoto, you will have all of the being in the originals folder in the finder. The roll with the same name as the other will have a _1 appended to it's name (in the finder)
    -the roll from the originals will be next to the same roll from the Modified folder within iPhoto. You can then delete any of the images from there if you want.
    I know this might sound confusing but it really isn't.
    Get back if any of this sounds like something you might want to do.

  • Can anyone tell me how this effect was created?

    At about 12 seconds into this clip there is the camera center frame brackets which take a snapshot and adds the clip to a timeline below the video.  Its all animated and very cool.
    http://gopro.com/videos/video-of-the-day/2013/7/30/

    Use Time Remapping to freeze the frame on its own layer, then scale it back to 0% over the original footage.  You can create the fake framing brackets pretty easily in AE, and just parent them to the footage.

  • Your current color settings discard CMYK profiles in linked content but profiles were set to be honoured when this document was created

    Hi,
    So this dialog has been bugging me for years! Yes, YEARS! Could never get rid of it. Tried deleting Ai Color prefs file etc etc nothing. It pops up even when there's no linked content on ALL .ai files regardless.
    I always have "Convert to working space" for both RGB and CMYK on and unchecked missing profiles/mismatch when opening.
    Would love if someone could shed some light as I have an unusual amount of files to go through this week and it's pretty annoying to have to hit enter overtime I open a file.
    Thanks!

    That means that the Illustrator document has an embedded profile.
    If you want to get rid of the message, go to your Color Settings > Color Management Policies > CMYK and change that to: Preserve Embedded Profiles.

  • I'd like to know how this banner was created?

    http://www.mayberryscustommetal.com/
    Thanks.

    Thanks Rootle.... very helpful, but I'm still missing the big picture here.
    I created several different small blocks of photos using photoshop (50x50 pixels) and saved them as jpg's (pic_1, pic_2, and so on). Next I opened Flash and started a new flash document and brought them in one at a time, lined them up, and copied pic_1 and pasted at the end of the line as you suggested. I then "exported movie" and saved as Banner.swf
    I then quit out, started a new flash doc and imported my swf file.
    Then I created a tween to slide it right to left. So far so good.
    Next I used gotoandplay (1)  - back to frame 1 again right?
    Here is how it worked when I hit f12... the block of images moved to the left as predicted but the last block (pic_1 that was pasted at the end of the row) moved over with the rest as the trailing block, leaving white space until it played out then the blocks started all over again.
    Summary:
    It almost worked. the blocks of photos played, looped and played again but not in a steady stream of photos. There was a break (white space) until the last pic reached position 1.
    Can you talk me through the rest of this? I want a constant stream of photos, even if they are the same ones.
    To be honest, I've only manipulated "Flash Templates" so far and have not actually created my own, so I had to reference youtube for help on tweening. So if you respond please type veeeerrryyyy  slow
    Thanks
    Luna13

  • This program was created to automate the download of joblogs and spools for

    Hi All,
    please suggest me the ways through which i can create a  program  to automate the download of joblogs and spools for the ARCHIVE process.
    thanks
    Ankit

    Please select all open PO according to the following conditions - select if the PO satisfies any one of the below conditions:
    1) Open Quantity is less than 10% of total quantity
    2) Delivery date is more than 3 months in the past
    3) Delivery completed indicator is set and delivery date is more than 6 months in the past.
    Then a manual decision is required. Best is to develop a report which will display the list and user can select and block from the report itself.
    Also, the 10%, 3 months, etc values are depending on the customer. You may want to modify these as suitable.
    Regards,
    Lakshman

Maybe you are looking for