RRI from the web template

Hi,
I have a requirement where in I need to jump from source query to target query from the web template. Our source query is static and no navigation is allowed. So in analysis grid item, I had to remove navigation as option. When I do this, user cant remove anything from the report but the issue is when user right clicks, GOTO option is not available. when I un tick the navigation , GOTO is available.
So my requirement is navigation should not be available but GOTO should be available in context menu.
Thanks
Annie

Hi Arvind,
Thanks for the reply.
Even if i copy and use it in the wad, User can still take out few rows from the selection if i dont switchoff the navigation from the web template. When the user removes any row from the table, my result of the report will be wrong because report is based on condition. Hope i am clear
Thanks
Annie

Similar Messages

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

Problem With the Web Template in the QA when moved from DEV

Hi SAP gurus,
I am Working in BI 7.0 SP16 . Actually I had Designed and Published a web template which generates graphs in the Portal.
In WAD
In the chart options, for X-axis, for the text direction i have changed to Diagonal UP and font for the text is "Arial" and style is "bold".
when I execute the Web template in Development System all the queries , graph and font is working fyn.....but when I transported to the QA system
the problem is:
When I executed the Web template in QA , the graph is generating fyn and the queries r running fyn but the font changed to "Times New Roman " , the direction of the text is "Horizontal" and the style is "Normal"
and when i checked the chart options in QA i can see all the options are right i.e what i had given in the development system the text direction " Diagonal UP" and font for the text is "Arial" and style is "bold".
this was the frst graph that i was generated in the WAD in DEV moved to QA.......so wat could be the problem.....Is there any problem vith the configuration issue in the portal side in QA or any connection problem in the portal?
can any one help me to solve this issue?
Thanks ,
Aravind

Hi sriman,
when u want to edit the chart-> rgt click on the chart and select the edit option
-> it vill take to the other window
-> at the bottom of the chart there is a button refine.click that button.it vill take to the others options for the chart.
->click the category axis(X-axis) or to the right of the chart, u can c the chart options,go to the category axis ,expand the categoryaxis option.
-> under the category option, there vill be four options Line, Grid line,Title and Unit.
-> Select the Line option,at the bottom of that window, u can c the option for the Line.
-> go to the text properties, u can change the text wat u want.
regards,
Aravind.

Issue in Dreamweaver PHP pages from the PHP template

I am learning to develop and publish a web catalog with a shopping cart feature attached. I am using PHP and MySQL as the tools to build this data driven website. However after creating the catalog list within the PHP template and needing the list as the menu within the sidebar of the webpages, the catalog list shows in the PHP template in Dreamweaver. But once I try to create a sub page from the PHP template, the list and all the contents does not show in the preview. After much checks, there is a issue with the sidebar class of the div, the issue is that a message shows that "Any content that does not fit in a fixed-width or -height box causes the box to expand to fit the content rather than letting the content overflow." I have tried to put the overflow:auto or overflow:hidden but to no success. How can get the catalog list to show without manually entering the over 50 categories that is already entered in the MySQL database? The template uses the 2 column fixed, sidebar, header and footer layout.

It's a little hard to understand your question and its context. Can you please upload this page and give us a link so we can see what you are describing?

How to do "export to excel" the web template charts

Hi friends,
I have a scenario that user want to do export the web template resulted output charts to excel.
We are in WAD 3.5.so we have to write javascript code to do export reluted three charts from three queries .
Can anybody please provide code...I tried many codes available in SDN but nothing worked.
Advance Thanks
Kumar MV

Hi Kumar ,
Hope this doc will be helpful :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e02729a3-34bd-2a10-6594-b618617f6d57?QuickLink=index&overridelayout=true
some more links :
Problem in Export bar charts to Excel
Regards,
Jaya

Erorr " The Web template "0ANALYZER" does not exist in the master system "

Hi
i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
"The Web template "0ANALYZER" does not exist in the master system "
i activated all templates but not able to execute any report in web
i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
please do help me

For clarification:
If following happens:
> you are launching the query with URL like:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
> then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
--> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
--> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
When you problem is other nature you have to describe it in detail.
Regards, Karol

The Web template the master system

Dear all,
When our developers traying to execute query from BEX query designer they are getting below error in portal.
The initial exception that caused the request to fail was:
The Web template "ZADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "ZADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:80)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:83)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:128)
Please let me know where i need to change settings for.
Best Regards,
AjitR

Hi,
Try this ->
Update your standard webtemplate in
SPRO->Business Intelligence -> Settings for Reporting and Analysis -> BEx Web -> Set Standard Web Templates
and execute the query.
Thanks
PP

Call VC iView from a Web Template.

Hi Experts,
I want to Call one of our VC iViews from a Web Template, i.e. When we Click a button or link in a Web Template a window should popup which displays the contents of VC iView.
Is this Possible? if yes, how can we achieve this? Kindly help.
Regards,
Rk.

Repost

Calling a function module from a Web Template

Hi,
I need to call a function module from a web template. Any pointers on how i can do this ? Is this even possible ?
Thanks
Shailesh

Hi Rael,
We were finally able to call a FM module from the Web. The trick as Heike suggested was to create an ABAP class which inherits from CL_RSR_WWW_HELP_WINDOW. Then you should modify the process_cmd method of this new class in order to call the FM. Now use this class to create a help service. In case you need to pass any parameters to the FM, you will need to pass them as additional parameters while calling the help service.
An example is below.
CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=ZBOOKMARKING&TEXT=mytext&URL=myurl
Where mytext and myurl were the parameters i pass to my FM and ZBOOKMARKING is my help service.
Thanks a Lot to Heike for his help on this !!
Shailesh

How do I access my AE attached lacie drive from the web

I just hooked up a 1TB drive to my new AE and think I have it configured properly in the disk pane of airport utility. I'm very much hoping that I have it configured correctly! I chose to configure "with a disk password", and not " accounts", and just for the heck of it clicked on the "?" [airport utility help] at the bottom of the Disks/File Sharing page. At the bottom of the page in help under "sharing a usb hard disk on your network", under " to set up disk sharing:" #4 "select the " share disks over ethernet WAN port" checkbox if you want to provide remote access to the disk over the wan port", It turns out that I don't have that message on my airport utility pane for Disk/ file sharing. I do have a checkbox that says " share disks over the internet using Bonjour, but I definitely don't have a checkbox that says " ethernet wan port" as a choice.
Why would my pane be missing that choice? I recall setting up the AE choosing to be able to use computers with the pre 802.11n compatability. Should I have chosen the 5ghz which is 802.11n only as I recall.
I hope this all isn't sounding to complicated. I just want to be able to access my hard drive [connected to the AE] remotely from the web and hopefully be able to access a huge music library that i have on that drive. HELP, PLEASE, KIND APPLE PEOPLE!

It is attached to another router.
In order to access a drive from the Internet, you need to know the Public IP address of the router and the router would need to be configured to port map the file service requests from the Internet to the drive. Apple provides Leopard and Snow Leopard users a means to access drives attached to an 802.11n AirPort Extreme Base Station (AEBSn), from the Internet, by using a feature known as "Back to My Mac." You may want to explore this option further.
Without Back to My Mac, the router would need to be manually configured to make this work. In a much simpler case where the 802.11 AirPort Extreme Base Station (AEBSn) is directly connected to the Internet modem, you would use the AirPort Utility to determine its Public IP address and to configure it for port mapping. The only difficult issue is the type of Public IP address that your ISP provides you. Most consumer-grade Internet service comes with a dynamic IP address. That means this address will change periodically and you will need to keep track of the changes in order to be successful in accessing it from the Internet. One way to do this is to use a DDNS service, like DynDNS.
In your case, there is an added level of complexity since the AEBSn is downstream of another router. You would have to configure both this router and the AEBSn to get this to work.
Should I try to set up with accounts, would that be different in regards to this problem?
The 802.11n AirPort Extreme Base Station (AEBSn) can share out a hard drive with three types of access: 1) Base Station Password, 2) Disk Password, or 3) With Accounts. Which type you choose will not affect the drive from being accessed from the Internet.

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone.

I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone?
Lois

Yes, the tone is available and checked in iTunes under the Tones library.
Yes, it is also listed under the Tones tab for my iPhone, but it is grayed out.
Yes, tones are selected under "sources" in General Preferences, along with everything else.
SyncTones was NOT selected under the Tones tab for my iPhone. I did so and it synced.
Thanks for your help!
Lois

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

With OSX10.7.5 and Adobe Reader 11.0.02 when I try to open a PDF downloaded from the web I get 'There was an error opening this document. This file is damaged and could not be repaired. Preview will not open either. Older PDFs OK.

I am running OS X 10.7.5 and Adobe Reader 11.0.02. In the last few days I have been unable to open PDF's downloaded from the web. Reader gives the error message 'There was an error opening this document. The file is damaged and could not be repaired'. Removing Reader and trying to use Preview to open these files give the error 'Preview cannot open this file. It may be damaged or use a file format that Preview doesn't recognise' (or something like that). Downloading the same files with Reader removed from my Mac Preview opens the files OK.
I was recently prompted to update Adobe software but did not note exactly what the update was nor when it was done.
Reader and Preview will both open PDFs I downloaded a week ago. Reader will also open files downloaded on another Mac running OS X 10.0.0 and copied to my Mac. Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

RRI from the web template

Similar Messages

Maybe you are looking for