RRI in WEBI Queries

Hi
is there a way in webi Queries to Use use the RRI concept .
I have 2 BW Queries one detail and the other Summary and 2 universers in BO
can you please suggest how to jump from theSummary report to the detail report.
Thanks,

RRI concept is called Hyperlinking in BO front.
To achieve this, you can use:
1. Hyperlinking by changing Infoview preferences to Interactive mode.
2. Using OpenDocument() syntax.
See below thread for complete understanding of how to set up both and will work.
Linking 2 web I reports
Hope it helps you.
Thank You!!

Similar Messages

Problem running web queries on machines with internet explorer 8 installed

Hello All,
We started noticing that a few of our users can no longer execute web queries in MS Excel spreadsheets created from .IQY files exported from Discoverer.
The users get the following error when they attempt to refresh data on their excel worksheet:
"The file could not be accessed. Try one of the following:
*Make sure the specified folder exists.
*Make sure the folder that contains the file is not read-only.
*Make sure the file name does not contain any of the following characters: < > ? [ ] : | or *
*Make sure the file/path name doesn't contain more than 218 characters."
Followed immediately by: "Invalid Web Query"
We believe that we've linked this issue to only occurring with users who've installed Internet Explorer 8, so I'm hoping that it could be some configuration setting that I could tweak, either in their internet settings or on the discoverer server.
Has anyone else encountered this problem? Does anyone have any suggestions?
FYI: Our discoverer server is version: 10.1.2.3.0 with CP4, and our clients are using JRE 1.6.0_12, the problem is occurring on my test machine with Excel 2003.
Thanks,
-Scott

After looking into this further I checked firewall settings in Panda A.V. For Firefox they were set to Custom settings which effectively disabled it. I changed setting to Outbound only like Internet Explorer and other programs and Firefox seems to work fine now. Hope this helps others who have experienced this problem. I have teenage children who use computer a lot (Face Book, etc.) so the root of the problem may have been Malware, Adware, or something else but hopefully Panda has taken care of this.

How to combine two user prompts into 1 single prompt from two Webi Queries

Hi All,
I developed a single webi report from two different queries on top of 2 BW OLAP universe .
Here I have one user input prompt for each query so I want to combine them into one single user input promt which should pass the user input value to both the Webi queries feeding data to the single webi report.
I found that the webi doc has auto checked merge dimensions enabled but it is not providing combined resluts from both the queries .
Any inputs are greatlt appreciated.
Thanks

Stratos
Firstly ,I appreciate your responses for my two questions.
Both the prompts I am using are from the masterdata and they are similar.data types.I think the transactional data is not available in BW for one of the prompt ,hence I am not getting consistent data.
Anyway will do further investigation in finding similarities and let you know.
Thanks a lot

Can I access Webi queries and Xcelsius dashboards from SAP portal?

Hello,
Can I access Webi queries and Xcelsius dashboards from SAP portal? And how?
Thanks

Portal Part 1
/people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
Portal Part 2
/people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
Portal Part 3
/people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
Portal Part 4
/people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
Ingo

Report to Report jump web queries variable screen on BW

Hello,
We would like the variable screen to always popup when the user runs a main query. We would like the variable screen to never popup when jumping from one query to another query.
We are using BW 3.5. We are using web queries, NOT Excel. Both queries are running on BW. We have set up jump query parameters in RSBBS. These jump successfully with all of the appropriate required variables passed from the from the first query to the second query. We are using the standard 0ADHOC template for all queries, including the sender and receiver queries.
With the FORCE_VARIABLE flag set to TRUE, both the sender and receiver queries popup the variable entry screen. With FORCE_VARIABLE flag set to FALSE, both sender and receiver queries do NOT popup the variable screen. We would like the FORCE_VARIABLE flag set to TRUE for the sender query and set to FALSE for the receiver query. Is this possible? How do you set the FORCE_VARIABLE flag to FALSE dynamically based on the fact that the user has just jumped to a receiver query?
Another alternative would be to build two query templates, one for sender queries and one for receiver queries. How do you switch to a different template when the user is ready to jump?
I have also been fooling with the RESET_DATA_PROVIDER command available in BW 3.5, but have not had any luck. Can this be used to accomplish my objective? How do I use it? Please remember that I am not setting specific jump targets in the web template. I would like this work generically based on settings from RSBBS.
Any other ideas to force the variable screen on the 1st query and bypass the variable screen when the user is ready to jump would be greatly appreciated.
Thank you.
Kelley

Hi Kelley,
Here is what is mentioned in SAP Help:
Calling up the Web template with reset variables and active variable screen
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate<b>&VARIABLE_SCREEN=X</b>&VARIABLES_CLEAR=X
Have you tried changing the URL for your sender query like this?
More: http://help.sap.com/saphelp_nw04/helpdata/en/3d/0dfe3980f23728e10000000a11402f/content.htm

RRI IN WEB APPLICATION urgent

hii
can someone explain me how to use RRI in web Application Desigener(jumping from one report to another report)

Hi Sanjeev,
Check this link,
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm.
Hope it helps.
Regards
Parth.

Discoverer Web Queries

Hi
Can anyone help me.
I have created a number of disco web queries (excel).
The location of the disco report is about to be changed onto a new server with a new address.
Is there anyway to access the address of the report in excel and change it rather that running each report in disco and reacreating the web query.

Hi
Thanks for the reply, however is there a way to amend the link in the excel file that has been created from the iqy file. Otherwise we would need to amend quite a lot of iqy files then recreate them in excel with the correct usernames and paramaters on another excel sheet.
Andy

BI web queries in HR portal without federation

Is it possible to display BI queries in a portal that is not the "BI portal". My landscape is as follows.
Have 1 EP 7 HR portal running ESS
Have 1 Dual stack NW2004s system running BI ABAP, BI JAVA, and EP.
CAn you get creative and use old bex reports or url iviews or something besides federation?
Thanks
Jeremy

Hello Jeremy
This should be possible. There are three ways of displaying a BEx Web application or query in a different portal. You can call the iView directly, via application integrator, or via BEx iView.
Please have a look at the following link. It is described in detail there:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/content.htm</a>
Best regards
Martin Rapp

RRI calling Web Browser instead ABAP program

Hi All,
I have created a RRI to call an ABAP program. However, when I try to call the ABAP program (via GOTO) it opens a web browser.
If I execute the same query via RSRT, and call the ABAP program it works fine.
I have also create another RRI to call another query from within BEx and it works fine.
It only fails when calling ABAP program from BEx.
I have read on to apply SAP NOTE 972514 - Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application.
My ms/redirect is already = 1
Any ideas?
Thanks,
Flavio

I do have authorization. There is no error. It just open a internet explore (URL) instead of executing the ABAP program.
Again, if I run the query via RSRT, it works just fine.
Any ideas?
cheers,
Flavio

Problem to run a web querie

Hello everyone,
I have a small problem, I made a modification of a querie because it gave an error when executed. And it turns out that once corrected the error, I run the query in the BEX analyzer, and everything perfect no mistake, however querie run by the Web and the error persists. He recorded the web plantlla again, he left and entered the web portal and nothing continues to give the mistake ... I can do?

You can publish VIs with remote panels from a PXI RT system. See the following document which explains how to do so.
How Can I View Remote LabVIEW Real-Time Front Panels in a Web Browser?

RRI and Jump Queries

Hi All,
What is RRI and what is use of it?
What are Jump Queries and use of it?
Can any one explain me the above two concepts with some senario.
Thanks in Advnce,
Khushi.

Please search the forum and you will find lots of good info on both of your questions.

What is Display in Window of RRI in Web Template

Hi All,
I have searched in SDN and read lot of documents and SAP Help to know, how to use one option in RRI, but ended up with no success. which is the reason I am posting my query here, pls throw your lights ;-).
There are 4 options available in web template settings to set up jump reports. I would like to know how can I use option 'Display in Window'.
Remaining options are
1. Frame Name - This displays the jump report in the specified frame, for this we can use HTML code.
2. No Entry (Blank) - This is the default setting, which always opens the jump report in New Window.
3._self - Using this value, the jump report will open in the same window, by overwriting the existing report.
I will be very thankful, if someone can tell, how to use 'Display in Window' option? I mean what HTML command I need to use or is there any predefined word which I can use.
Your answers are much appreciated.
Regards
Charan.

In fact having checked out a number of videos on Lynda.com, Illustrator is what I want. It was never about html - that already forms part of what I am already doing. As to mailchimp - I know all about that and don't like it and don't need it - the method I currently use from Dreamweaver to email works great.
The question was always about graphics and text for the web and a desire to have the same layout and quality as InDesign - I probably just didn't ask the right question.
Thanks as always.

No stats for Web queries

Hi Friends
We are using portals to run reports.When the queries run on Bex analyser, stats recording fine but however when we run the queries on Portals,the stats are not recording.
Then I did load data from RSDDSTAT table into 0BWTC_C02 cube.Now no.of navigation isok but overall time and meantime are displaying as '0'.
What is the correct solution to record bw stats for web based queries?
Regards,
Chama.

Hi
My problem is not the performance problem.
When query ran on portal then BW stats not showing the details of meantime ,overall meantime,time olap processor etc.
When I run the stats query '0BWTC_C10_Q010' - Utilising OLAP, It's showing only number of navigations and it's showing remaining all the fields '0'.
How can I resolve this problem.
Regards,
Chama.

Is it possible to run 3.x web queries on BIA, or is conversion required?

Greetings Colleagues ...
I had the following question from one of our partners.
Does the BIA accept 3.x web templates/query versions or do we have to successfully convert/migrate them? Meaning, is the same OLAP engine used for both versions (3.x and 7.x) in 04s?
Thank you in advance for your help!
-M

Hi Michael,
As Far as I know, for the queries we need do anything but for the web templates we need to go thru the process to convert them to be able to use in BI7.0.
But u have to be careful that If u open those queries with the new query designer , u will not be able to open the same queries with the 3.x query designer.
Thats the only thing u need to care of when u are using the BI 7.0.

Issue while running IQY web queries

Hi All,
I have a problem with the iqy file,
i have a couple of parameters in the web query (to_date & from_date)....if i run it for 10 days it runs fine........but if i run it for 1 month it gives me an error "the site reports that the request is not valid".
i did not understand why this error message is coming...........
Any thoughts would be appreciated.
OracleBI Discoverer 10g (10.1.2.1)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18)

Hi Michael,10769464
Hurray...Found the solution for this Issue,
Yes, There is a setting(Web Server Timeout setting) that controls how long an web query will stays active.
We need to increase the Web Server Timeout value in order to make these long running IQY file complete successfully.
and this setting is found in httpd.conf, the default value is set to 5 mins, increase this time out value to 30 mins(you can keep any value, as per your requirement)and test you IQY files, they will complete successfully.
(Dont forget to Bounce the server after making the changes to httpd.conf)
Below is the path to httpd.conf
On UNIX: <ORACLE_HOME>/Apache/Apache/conf/httpd.conf
On Windows: <ORACLE_HOME>\Apache\Apache\conf\httpd.conf
Thanks
Ss

RRI in WEBI Queries

Similar Messages

Maybe you are looking for