RRI interface (GL / WBS combination)
Dear All,
Is it possible to create a jump target from a BW query to a report in R/3 based on GL account and WBS elements ?
I've managed to create a link for the GL account, but have trouble making the R/3 report return values for the particular GL / WBS combination per the BW query.
We are trialling this on transaction code FBL3N, which has GL account on the front screen, WBS element on the 'additional selections' screen (red, blue, green icon).
Regards,
Frederick
Good point, I may be off on this as this is my first time doing this gl journals interface but I am thinking that it is best to do all
validations prior to loading into interface table to stream line that process. If you have many errors when running the journal import process
is it burdensome in trying to get through all the errors? That is you fix one error and then encounter another error vs trapping all errors
in a staging area at once?
Similar Messages
-
Hi all,
How can I find all query sender and the corrispondences query receiver in BW?
Thank you
GianmarcoHI,
It is an option to jump from one report to another report
When you executes a query , right click on query --> go to option --> here you will have the destination for the report.
Usually the RRI is created between summary and detailed report.Summary report on infocube and detailed report on DSO.
You have a report at customer level. If you defines a report to report you can do right click over a customer, go to another report, and the new report will be filtered by this customer if you have the customer as a free characteristic. To define this you can use tcode RSBBS .
Please go through the following links for RRI.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
What's new in SAP NetWeaver 7.0(2004s)? - An introduction to the functionality deltas and major changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Hope it helps. -
RRI Interface from result rows
Hi,
Is it possible to do RRI from result rows from a query.
Thanks
JyothiHi,
Are you running the report from the query or from the workbook? If you have changed the query and are stilll running the same workbook, sometimes these changes do not come through...Close the workbook and try to execute the query again. Does it still happen? -
RRI (Report Report Interface) with ABAP Sender program
I need to call a Report Writer report from a bespoke ABAP program. I can call transaction START_REPORT to do this, but I wondered if the Report-Report Interface can be used here.
Has anyone ever programmed a direct call to the RRI interface in ABAP?Hi Robin
I know the answer comes late but you might find my wiki posting helpful:
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP+Report-Report-Interface
Regards,
Marc
SAP NetWeaver RIG -
How to identifing the parent report from child report in RRI
Hi Floks,
Long back we have created one RRI report(which is having parent child relation).Now i have child report with me,i wanted to know the corresponding parent report.Please give me some inputs to identify this.
Regards,
Satya.Check in these tables:
RSBBSQUERYDIR
RSBBSQRYMAPPING
Also check in table RSBBSQUERY to get the source and target of the RRI interface.
Pravender -
Report-to-Report Interface, Jump Target
Dear Friends,
Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
ThanksH I Ramesh,
see best example.. genrate one query on master data... and another query on transactiona data..( but make sure that... your transactional query should contain atleast one field that exist in first query)
for example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS)
nad generate second Query on Employee transactional data ..( that contain..
EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
now go to RSBBS tcode... and give the first query name.. and in the down give the second query name..save it..
now go to BEX and execute your first query.. and in that select any EMPLOYEE NUMBER and right click it--> and select second query name.. ..
now you can able to see that particular employee details only..
regards
@jay -
Hi ALL,
I have a requirement where i have to Create a RRI in bex Reporting, How can i introduce RRI interface for one query to another. Is BI 7.0 supports RRI ? if so How it will process and works ,What are the settings lieing in sender and Receiver and Assgnment Details. Does Query1 and Query2 has atleast one info object common? what if not.
It would be great if anyone answer
Thanks
Dolly.Hi dolly,
For example, Suppose you created two cube CUBE A ( which contains Company code , Customer, Revenue) and Cube B (Controlling Area, Region, Price) . so There is no common column.
On cube A you created query QUERYA
On cube B you created query QUERYB
GOTO>>> RSBBS,
sender>>>CUBEA/QUERYA
REPORT TYPE>>>>BW Bex query
Target>>>> Local
receiver report>>> CUBEB/QUERYB
save it.
after you run the query in analyzer
Right click on the repor>>>> goto >>>> QUERYB. it will jump.
But Unlike the other it will just jump from QUERY A TO QUERY B. But its not jumping into the query w.r.to particular charecteristic.I mean for the respective region you can't find the detail information like product, and billing document, customer.For these thing threre should be common charecteristic.
Regards,
Ranganath -
RRI sending restrictions issue in BEx Analyzer - Known SP Issue?
We have two queries linked through an RRI interface that is designed to "send" a restriction of one characteristic when the user right clicks on the cell containing the value they want to see in the second ("Goto") query and selects "Goto" and the second query's name. This interface works fine on my machine with both my ID and the test ID the users are using to test these reports. My machine is on SP8, Patch 1 Revision 1443. However, when the users execute the same query and try the RRI they see the second query with all of the values in that column, not just the one they "selected". They are on SP7, Patch 1 Revision 1352. Is this a known issue with this version of Analyzer? I have been searching around and can't find any documentation saying so, but something "official" from SAP that documents this would be perfect to recommend and upgrade to SP8 to fix this problem.
Thanks!Hi Somenath,
Are you sure that all the data in cube is affected? I mean also the data loaded in cube before GUI upgrade?
I have a feeling that instead of GUI upgrade something happened to the background user that is extracting the data in source system. E.g. this user master data has changed - in decimal format.
So check the user and check data loaded before/after change of GUI.
BR
m./ -
Restricted WBS during PO Creation : Department wise WBS to be allowed for PO Creation
Dear SAP PS Members
as per the SAP Standard anyone can choose the account assignment checked WBS for PR/PO Creation, however we are facing issues with this as end user may choose other department WBS out of understanding.which leads to reporting inconsistencies showing wrong picture of cost and assigned values.
is there any way by which we can allow each department to use only their department WBS for Procurement (materials and services).
that means SAP system shall control and avoid any transaction or postings on non relevant WBS's for the respective Department. ( other Dept. WBS)
please provide the ideas or workable logic !
Many Thanks
Avinash ShelkeHow you are specifying that XXX-XX-X WBS is relevant to ABC department and so on? Are you using any custom field like 'Owner code' etc. to specify it?
Through std. customizing its not possible but through development it can be done as follows:
If you are maintaining department/owner code field n project structure for wbs then use this department-WBS field combination to validate it during PO, you need to maintain 'Department' field as a mandatory field in PO master (check whether it's custom field or std. in PO,i think it would be a custom one).
Once department field appears in PO that validate it from 'department-WBS' combination of project structure (use these fields from table PRPS) and pop-up warning/error message accordingly. You would require stand. user-exit for it in PO search for it in MM forum.
And if, you are not maintaining department/owner code field in WBS master then maintain it in a separate table (WBS->department) and validate in the same way as explained above.
Thanks. -
Hi all,
I want to put the RRI interface in a Command button you can create in the WAD. It is not clear to me how the functionality works. I have made a sender/receiver assignment via transaction RSBBS. The functionality is now available via the context menu, as ever. But, when I use the command RRI in the command wizard to put the function in a push-button this does not work at all. Can someone explain to me how this function works.
Regards,
MachielI am not sure whether we can do it..however
might want to check below links...
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/8a784226d1d242e10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
Hi,
We need to use the RRI interface for reorting, can anyone please help in letting me know about the steps required to perform the RRI requirement. how to go about implementing the same.
many thanks
Srinivas
Please search the forum
Edited by: Pravender on Feb 25, 2011 12:32 PMHi Mrclspdl,
sorry I cann't help u because I don't have much idea in this.
But it seems very interesting. so pls after solving it post the solution or hints for our reference.
Thanks. -
Hi All,
I am using a WBS bom in project. I do the cost estimate in CKw1 and also activate it in CKW4. Now this new cost has to appear when I do a network costing. I tried changing the valuation variant but somehow it did not help. The system is still taking the old material master price. Do i need an exit to have the new price for this material and WBS combination.
Any help in this reagrds is appreciated. Also would like to know the transaction to delete this costing run.Did you do CK24 (Price Update Release and Marking)after CKW1/CKW4?
CK44 - Delete Costing Run
CKR1 Delete Std Cost Estimate -
can any one solve my doubt?
why constants in interface implicty have combination of modifiers
static and final
regarding final i have no doubt since we dont change the constant in implementations
my doubt is regarding what is the need ,[b]it should be static.
can u explain clearly> it is standard, ok , for every standard there is a
reason
it is right, why it shoub be static also.please give
me the reason
The language specification requires it.
http://java.sun.com/docs/books/jls/third_edition/html/interfaces.html#9.3
Why? Because instance variables (i.e., non-static variables) are an implementation detail, which do not belong in an interface.
~ -
Hi,
We are having 3 reports, out of which two bex reports have RRI reports. The receiver report is a URL. During the transport always it says RRI query elements are not active and all the three reports are not going to quality system.
these 3 reports are based on a multiprovider.
Can you please give your suggestion.
Regards
Sudha-As SAPBUDDY suggested try to collect all the Queries from Transport Connection (RSA1) and select all the Query Elements from it. Make sure you expand all the collapsed Query elements.
Do not collect any other objects other than the Query elements.
Try this, and if you still get an error saying that some Query element is inactive or version M then it means you are missing some elements to capture in the transport.
Once the Quries are moved then collect the RRI interface directly from RSBBS. -
I have set up some RRI interfaces to jump from a BEx query into SAP. This is now defaulting to the web rather than opening up the GUI.
Does anybody know how to switch this default? Didn't have this problem with 3.5.
Any help appreciated,
thanks
MikeHi,
Have a look at the link:
http://help.sap.com/saphelp_nw70/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
Best Regards,
Rajani
Maybe you are looking for
-
When Nokia Video Centre (like watching youtube on ...
NOKIA ?
-
I have tried to upgrade Itunes, but everytime I do it comes back saying it cannot be installed & that it needs QuickTime. But when I try to download QuickTime, it claims that it could not open key(?) I've even uninstalled Itunes completely, but it st
-
Variant configuration for material in sap B1
Hi, Please explain how item variants can be configured in SAP B1 against materials like SAP R3. Noramlly all the attributes of amaterial cannot be incorporated in material code which are to be filled at the time of transaction in sale order. Every
-
Hi I've discovered a problem with NAT on a 2651XM ios 12.4(15)T14. Static NAT entries work fine, but NAT overload (either from a pool or using an interface) exhibits an annoying problem. The first outbound packet of a new connection is always dropped
-
I am having trouble loading myspace with safari, it is half loading myspace.com/ my home page/ and my profile is there anything i can do to get it to work