RRI jump to BEx from EP is not working

Friends,
We have configured BI admin cockpit. When I click on any iView and then Go To->,
all the jumps to Web GUI (tcodes) are wroking fine. But jump to BEx web application is not working.
Go To-> Infocube Status : Analysis, * Analysis.. are not working. It shows "This page can not be displayed".
But those templates are available in the system.
If I try the same web applications from RSRT tcode, the RRI is working fine.
Please help..
Joe

Hi Joe,
Below link will helps you to solve the issue...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
If not please take help from your admin guys(Basis people)
Regards
Sudheer

Similar Messages

  • SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

    SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
    Dear Portal Gurus,
    we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
    1) We have Done SSO between EP And BI System
    2) System Object is Created
    3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
    4) We have updated the required table in Bi system for executing the report on EP
    5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
    There no irj services available on BI system, as it is only ABAP stack.
    Can anybody help us in achieving our requirement
    Thanks in advance
    Michael Wecker

    Hi Michael,
    To integrate portal with BI you need to perform BI Portal integration steps.
    Refer to a document link below for guidance purpose.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
    Ensure that you have performed all these relevant steps.
    Hope this helps.
    Regards,
    Deepak Kori

  • Consuming PI Webservice from Webdynpro Java Not working

    Hello SAP,
    Environment: CE 7.2.
    Resolution expected immediately, Helpful answer is highly appreciated.
    Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
    I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
    I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
    Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
    Options tried so far:
    1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
    2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
    3) Changing the Business Systems in PI and there after calling the service - Not worked
    4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
    5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
    For all the Options, I am facing the same error which is provided in the screenshot.
    Below procedure which I have followed for calling the PI Webservice:
    1) Created Adaptive Webservice Model
    2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
    3) Selected Option - No Service Group Configuration
    4) Provided Logical Destination
    6) Completed creation of Model
    7) Added the model as a UsedModel
    8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
    9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
    10) Build the project.
    11) Activated the code and Run the Application.
    12) Getting the below error which is showed in the message.
    ERROR MESSAGE:
    Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

    Hi Sankar,
    If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
    Please check the code for initialization and execution for the webservice and then test it.
    Best Regards,
    Arun Jaiswal

  • Select * from tab is not working in oracle 10g

    select * from tab is not working in oracle 10g. But at the same time,
    select * from <<table>> is working.
    Please advise me.

    This works for me in 10.2.0.2
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select * from tab;
    TNAME                          TABTYPE            CLUSTERID
    LOAN_DETAIL                    TABLE
    PLAN_TABLE                     TABLE
    ...

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

    Hello,
    I would like to ask a question, hopeing it is resolved in some way and i missed it.
    I have installed SP3 Rollup 4 on our Exchange 2010 server.
    This added 2 new Powershell commands
    Get-MailboxSentItemsConfiguration
    Set-MailboxSentItemsConfiguration
    This can be used to manipulate where mail is stored in the send items.
    Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
    SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
    From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
    What we really want it to use the From only way.
    We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
    2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
    Here is is stated on 1 July 2013
    http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
    From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
    That was on 26 March 2013
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
    NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
    We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
    Looking foward to any replies.
    Kind regards,
    Jeroen van Velzen

    I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
    I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
    but the other does.
    If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
    configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
    If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
    the shared mailbox you will see it in Deleted items folder of the shared mailbox.
    The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
    This was accomplished without using the Set-MailboxSentItemsConfiguration command.
    We are running Exchange 2010 SP3 RU4.

  • "Values only from infoprovider"  setting not working

    Hey Guys,
    I am on 2004s backend and 3.5 frontend. I need to restrict values of a characteristic on F4 and report only to infoprovider values. I know there is a straight setting in Info-object maintenance screen where you can specify in Bex tab, Only values from Infoprovider.
    But unfortunately its not working for me. Even after doing this setting, I continue to get values from master data table on F4 screen.
    What could be missing?
    Please note that my info-object on which I am applying this setting also has a compounding characterstic, which makes 2 values as key to appear on selection screen.
    Any suggestions/advice would be of great help.
    Thanks
    Abhijit

    BTW, the firmware was run and the keyboard AND audio did work prior to and after the firmware update. It just suddenly stopped.

  • BEx Fiscal Period variables not working in Webi

    Hello,
    We have an BEx user entry variable for Fiscal period, that works correctly in BEx. In the prompt LOV, I get values from year 2003 to 2013.
    When I run it in Webi, the LOV starts from year 0000 to 2040. Also there are 16 periods in a year, wheras the LOV displays 24 period, even after restricting on fiscal variant.
    Has anyone  successfully been able to make Webi work with BEx fiscal period variants?
    Thanks,
    Nikhil

    I created a universe objects with following in the
    "Select"
    [0P_FPER].[NAME]
    "Where" condition
    <FILTER KEY = "@Select(Fiscal year Period\LovPeriod_Fiscal Year)">
    <CONDITION OPERATORCONDITION = "Greater">
    <CONSTANT CAPTION = "AB1000001"/>
    </CONDITION></FILTER>
    When I create a report with this object, I get no data.
    I change the above to
    "Select"
    [0P_FPER].[NAME]
    "Where" condition
    <FILTER KEY = "@Select(Fiscal year Period\LovPeriod_Fiscal Year)">
    <CONDITION OPERATORCONDITION = "Less">
    <CONSTANT CAPTION = "AB1000001"/>
    </CONDITION></FILTER>
    I tried changing the CONSTANT CAPTION values, everytime "Less" works but "Greater" does not. Does "Greater" not work?

  • BEX Analyzer Send button not working

    When we go to BEX Analyzer, run a report and then click on the Send button, we don't get the Send email screen. All we get is a blank IE pop-up. Any help?? We have SCOT configured properly.

    Make sure you set profile parameter from the attached note.
    https://service.sap.com/sap/support/notes/972514

  • Bex Launcher Send button not working

    Hi,
    Iam using BI 7 / 2004 s. When I execute a query from query designer, it opens in a portal page/ Bex launcher. When I hit the send button it gives an error 404 not found.
    Can anyone pls tell me what setting has to be done to overcome this error.

    Make sure you set profile parameter from the attached note.
    https://service.sap.com/sap/support/notes/972514

  • Setting of "opening web pages from last session"not works when open next time

    In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

    ''setting to "open windows & tab pages from last time" does not work.''
    That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
    With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

  • Archive folder missing from Mail & search not working

    I've been having trouble getting the Archive mailbox to appear in Mail. What's worse, often the search function is broken, and Mail doesn't turn up any search results. I've found some ways to get the Archive folder to reappear, but these only seem to help temporarily. For instance, clicking on the gear at the bottom left and selecting "Get Account Info" then selecting the Archive folder causes it to reappear, but this is only temporary and it disappears after another restart or sometimes after an hour or two. The search not working is the worst, as it sometimes is working and sometimes isn't. I don't have any idea what's causing this, but I am at my wit's end because I NEED Mail to be firing on all cylinders.

    Hello, and welcome to the Discussions.
    What are your selections in Mail Preferences/Accounts/Advanced for this Gmail account, if using IMAP, regarding keeping message for Offline use? The Mail search can only access the list of messages to search Subject, From, etc, but not the entire message unless copies of all messages are being kept on the computer. This would be true for any IMAP account, btw.
    More info, please.
    Ernie

  • Custom DB authentication to an application from Oracle Portal not working.

    Hi All,
    We have a Portal customized and integrated to LDAP for SSO.
    From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
    When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
    Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
    In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
    Below is the code:
    <?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
    <!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
    <jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
    <property name="role.mapping.dynamic" value="true"/>
    <property name="custom.loginmodule.provider" value="true"/>
    </jazn>
    and in jazn-data.xml, we gave the role mapping.
    But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
    Can anyone throw light on this?
    Do we need to give the same configuration in the j2ee/home/config directory files also?
    Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
    Any help in this regard will be highely appreciated.
    Thanks,
    Sasi Bhushan

    Hi All,
    We have a Portal customized and integrated to LDAP for SSO.
    From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
    When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
    Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
    In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
    Below is the code:
    <?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
    <!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
    <jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
    <property name="role.mapping.dynamic" value="true"/>
    <property name="custom.loginmodule.provider" value="true"/>
    </jazn>
    and in jazn-data.xml, we gave the role mapping.
    But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
    Can anyone throw light on this?
    Do we need to give the same configuration in the j2ee/home/config directory files also?
    Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
    Any help in this regard will be highely appreciated.
    Thanks,
    Sasi Bhushan

  • "Show my windows and tabs from last time" not working, Mac OS 10.6.4, FF 3.8.10 or FF 4 Beta 6

    I have tried any number of times to get this to work, but it's still not working. On my other Mac with OS 10.6.4 and FF 3.6.8/10 the "show my windows and tabs from last time" is working just fine.
    I have checked some of the settings in about:config per some of the other forum posts with resolution to this issue, but this hasn't worked for me. Especially Since some settings have changed in the more recent versions of FF.
    I'm pretty sure my settings are correct. Is anyone else having this same issue?
    On the Mac exhibiting the issue it prompts me if I want to close all open tabs when the red X is clicked, when I quit firefox it keeps my tabs open just fine when firefox starts up the next time. This is normal behavior, but when the feature in question is active it overrides this behavior, on my other mac, and just stores my last session so that when I open firefox all is as it was before it was closed (either closing it via quit or with the red X will do the trick).
    On my new mac, the prompt to close open tabs never goes away and my tabs just vanish, whichever way I close firefox.
    I hope that was clear enough. Thanks for any help.

    See http://kb.mozillazine.org/Session_Restore
    If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

Maybe you are looking for