RRI not working in the QA system urgent plzzz

Hi All,
I had created the RRI its working fine in the developement.
When i Transport it to the QA the RRI r not working,
but I am able to Run the Individual Reports.
Plz let me know what may b the problem.
Another thing is I had created the YTD its working fine in the Dev. When i Transport it to the QA its behaving differently.
As when I Enter the Date of Feb 2007 its displaying the Data and calculating the january and Feb of 2007 value.
But in QA its Calculating the YTD Value from Dec 2006 - Feb 2007
Thanks in Advance
KK

Hi KK,
Whenever we perform transportation of object, we should follow order in which they were created.
Here we can transport sender and reciever queries at a time because they are different queries. After the transportation of both the queries are done, we should transport the RRI. While selecting RRI, it asks for the sender query in Transportation screen. This should be done after the sender and reciever queries are already transported to QA.
Sometimes, you may face problem with the Assignment details in RSBBS screen due to improper transportation. You need to map these assignment details again in QA.
Assign points if this helps u...
Regards,
KK.

Similar Messages

  • My Font Book tells me it will not work in the present system. I have 10.6.8. How can I update my Font. Book?

    My FontBook tells me it will not work in the present system. I have 10.6.8. How can I update my Fon Book?

    Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
    (73181)

  • Navigate_absolute is not working in the quality system.

    Hi experts,
    i developed a webdynpro component and integrated into EP, Here when i test my application through ep (developmemt system) everthing is working fine. But when i test the application through ep (quality system) exit button is not working its not navigating to OVERVIEW SCREEN in EP, And the code which i have written in the exit button is.
    Exit button is working in development system but its not working in quality system.
    METHOD onactionexit .
    TYPES: BEGIN OF navigation,
        target       TYPE string,
        mode         TYPE string,
        features     TYPE string,
        window       TYPE string,
        history_mode TYPE string,
        target_title TYPE string,
        context_url  TYPE string,
       END OF navigation.
      DATA: wa_navigation TYPE navigation.
      DATA lo_api_component  TYPE REF TO if_wd_component.
      DATA lo_portal_manager TYPE REF TO if_wd_portal_integration.
      lo_api_component = wd_comp_controller->wd_get_api( ).
      lo_portal_manager = lo_api_component->get_portal_manager( ).
    wa_navigation-target =  'ROLES://pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.overview'.
      wa_navigation-mode   = '0'.
      CALL METHOD lo_portal_manager->navigate_absolute
        EXPORTING
          navigation_target = wa_navigation-target
          navigation_mode   = wa_navigation-mode.
    please provide requried information.
    Thanks & Regards.
    Bhushan.

    Hi,
    The both mentioned virtual systems are in different LPAR's (Physical host).
    Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf  and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
    Can you please look in to it and provide some thing which I have to look in the OS level.
    Thanks & Regards,
    Sandeep

  • Requirement 607 does not work in the Quality System

    Hi,
    I have the following problem. We have transported the entire developed applications from Development System to the Quality System.
    Maintained one output type through T-code MN04. The self created requirement 607(output control) doesn't take
    any effect in the Quality System. I have set a breakpoint in the code (within Requirement 607 coding) it doesnt
    stop there. Clearly said it does not work similar as in the Development System. There is everything OK.
    Did you ever come into across with such a problem. Please help me on this topic.
    Friendly Regards
    Marco

    Hello Marco
    I had once a very similar problem like yours and it was indeed due to a problem of generating these odd exits as described by Roger.
    The SAP note which helped to solve the problem was: [Note 28683 - PERFORM_NOT_FOUND: VOFM routine is not active|https://service.sap.com/sap/support/notes/28683]
    Regards
      Uwe

  • The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

  • URGENT: Sorry, Expander will not work without the Stuffit Engine...

    hallo,
    I want to watch a show of myself on Time Warner Cable TODAY live ONLINE while being in Europe, so it is urgent:
    sometimes when I try to install a software I get the following error message:
    'Sorry, Expander will not work without the Stuffit Engine. Please reinstall the original installer.'
    Just now I wanted to install 'Windows Media Player 9 for Mac OS X' and got that error message. Any suggestions?
    THANKS YOU!
    1 GHz PowerPC G4 (3.3)   Mac OS X (10.4.7)  

    "Any suggestions? "
    Obviously you need to reinstall Stuffit Expander. Download it from Stuffit.com.
    Also, forget about Windows Media Player. It's out dated, and not even made anymore. Download the free Flip4Mac QuickTime plugin from Flip4Mac.com
    Hope that was urgent enough...

  • I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • SWF file is not working in Portal PROD System

    Hi All,
              We have written custom mxml script in Adobe Flex 3 which displays the list of applications stored in the DB. Then we have posted that .swf file into our Portal KM and then we have created one URL iView with the location from KM.
    These days we are facing issue like the output of the script is not working means the applications are not listed on the portal prod system.
    Whenever the issue arieses we are requested to upload the file once again into KM and it works after the upload been done.
    We are not sure what could be the reason for this issue and I request any one to assist us to resolve this issue.
    Please let me know if you need more info on this issue.
    Thanks in advance.
    Best Regards,
    Vijaykumar K.

    Hi Vijay,
    I belive this should be a portal issue, anyways let me give it a try.
    I never worked on flex in SAP but did similar stuff in portal content development.
    Do you have any traces in that development..?
    Did you check any messages being loged in portal...?
    Check if there is any issue with the file like couldn't recognise a resource from KM which is required etc.
    Cheers,
    Sai

  • My hyperlink is not working in the site I just published in Muse

    My hyperlink just works on the computer where I published my site from a Macbook  Pro 10.6.8  IOS, in Firefox 19.0, please help!  I have imported it into Dream Weaver CS6, but still canno pinpoint the problem, it looks and behaves the same.  The site page that I published is http://www.shamarihairsalon.com/contactappointments.html.  When clients click on make an appointment at Flakes Mill Location the link expires
    Message was edited by: Laquacer Daniel

    Vinayak,
    Thanks for your response as you were the only one to respond,   however this site was redone in Muse, and worked in the previous site (which was not created in Muse) whether the user login or not.  The only one who has sign-in capability is the owner of the account the, hence the salon owner.  Her clients had been using the site before to make appointments...the link recently stopped working after it was published.  Is their anyway around this? such as altering the way Muse create hyperlinks?  Could an anchor be used instead,? How would that work? Just grasping for straws and want eliminate possibilities.
    Thanks,
    Laquacer
    Re: My hyperlink is not working in the site I just published in Muse
    created by Vinayak_Gupta in Adobe Muse Bugs - View the full discussion
    The link https://appointment.bizlinkms.com/?page=appt is to an external site that probably requires a login first in order to access it (and hence the session error). You are able to access that page from a particular machine as you are most likely logged into that site already and hence the cookie exists in your browser that is maintaining the session.
    On a quick look, the site's login page appears to be https://system.bizlinkms.com/
    Nothing to do with Muse though.
    Thanks,
    Vinayak
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5113021#5113021
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5113021#5113021
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5113021#5113021. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Mail is not working. The app opens because I see a light on under "Mail" in the dock.

    Mail is not working. The app opens because I see a light on under "Mail" in the dock, and I see the menu at the top of my screen, but I don't see the app itself or any windows. It is like it is running in the background, but I can't see it. Everthing is subdued when I click on the choices up in the menu. I have tried "Force Quit" and then re-opening the mail app several times, and have rebooted my notebook twice. What is weird is that this started right after I changed my password in a browser (it is a gmail account). I went into the System Preferences on my MacBook and changed my password there as well, so it should be setup properly to open. I am running Mac OS X Lion 10.7.5.   Any help anyone can provide is much appreciated.

    The current Mail version for 10.6.8 Snow Leopard is 4.6 (1085).   Run Software update or the combo updater ... Mac OS X 10.6.8 Update Combo v1.1

  • BSP: Use of dynpro services is not possible in the current system status

    Hello,
    in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
    Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
    If i test the method this works fine.
    If i call this method in my eventhandler i get BSP error:
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    Use of dynpro services is not possible in the current system status
    Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
    Error Name
    Program ZCL_CRM_CS_DATA_SERVICES======CP
    Include ZCL_CRM_CS_DATA_SERVICES======CM001
    ABAP Class ZCL_CRM_CS_DATA_SERVICES
    Method CREATE_CS_ORDER
    Line 54
    Long text -
    Error type: Exception
    Any ideas?
    thank you
    Best regards

    Hi,
           Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
    Regards,
    Arun Prakash

  • Use of dynpro services is not possible in the current system status

    Hi,
    I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA,  working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
    "Use of dynpro services is not possible in the current system status"
    not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
    Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
    Error Name DYNPRO_SEND_IN_BACKGROUND
    Program SAPLSKEY
    Include LSKEYU03
    Line 33

    Hi Keith,
    Welcome to the SCN forums!
    SAPLSKEY
    You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
    In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
    Regards, Trevor

  • Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey

    Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

    A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
    Regards.

Maybe you are looking for

  • Purchase Order Release Help

    Dear friends, My question is about PO approval strategy. I add a new field to CEKKO (ERNAM - name of person who created the object) and create a characteristic (Z_ERNAM) that referrers to CEKKO-ERNAM. Then assign this characteristic to PO release cla

  • How to implement this? please help

    In my java class, I have a string array called strarray which hold serveral elements, some of the elements have the same value , for example, the first element is "swimming", the forth element is also swimming. I use a for loop to get each element an

  • How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

    I want Change format mask for all fields that type's number Such as if  :parameter_value = 1 then    all fields format mask = ' 999,999,990.000' ; else    all fields format mask = ' 999,999,990.00' ; end if; Regards

  • Streaming files through servlet

    Hi, I'm trying to stream a file to the client browser via a Struts action. I use a helper method as follows: public static void streamFile(HttpServletResponse response, String contentType, String fileName, InputStream fileData) throws Exception {    

  • Problems storing music on new touch

    my new ipod touch can store as much music as my old one!  it says ~2,000 songs is like 13GB...does that make sense?  does it have to do with the new iso software reading the music files on my crappy HP laptop whic is running on vista?  will this imrp