RRI: refresh in the target query possible?

Hello BW Experts,
I have send the customers c1, c2 and c3 to the target query.
Q1 -(c1,c2,c3)> Q2
Q2 is a customer level query.
if jump from Q1 --> Q2.If I refresh Q2 will i be able to look at all the customers otherthan c1,c2,c3 ?
Please suggest.
Thanks,
BWer

Hi,
Possible if the jump query (Q2 in this case) is a separate query with its own selsction screen and customer as a selection criteria in there.
Cheers,
Kedar

Similar Messages

Selection screen in the target query RRI

Can I get a selection screen when I am drilling down from source to target query.
Thanks,

Dear Gokul,
I would suggest you to go through Note 1053310 as this will answer your query.
regards,
arvind

RRI - How to edit the Receiver query

Hello All,
As per http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/156e3fefa13042e10000000a114084/frameset.htm
I created a Target for my query (sender). The target or receiver query is also a BeX query in the same system.
Now in my sender query, I have Department in my rows and Employees in the columns. When I double click on Department, it takes me to Target but it does not show the report in the format I want. How do I modify the receiver query?
Also if someone has good knowledge in RRI, it would be really helpful if you can help me out with my query?
Thanks in advance
Regards,
Abhishek

Hi Abhishek,
-- Characteristics that are to be filled from the sender query should be defined as free characteristics. A hierarchy node restriction, for example, can also be transferred to free characteristics as a property.
-- Changeable variables for the receiver query are not filled by the RRI.
-- Selections for various InfoObjects are transferred if the InfoObjects have the same reference characteristic.
When the RRI is called, the sender query transfers the following filters to the receiver query:
·        global filters
·        values in the navigation block (dynamic filters including the presentation hierarchy)
·        filters from the restricted key figure selected
·        filters from the drilldown characteristics selected
The system first fills the variables and then fills the navigation block. In order to do this, a unique characteristic assignment must be possible. Selections for various InfoObjects can then be transferred, as long as the InfoObjects reference the same basic characteristic. Hierarchy nodes are triggered in selections and can then be transferred to the respective InfoObjects.
See this link and if any further questions get back to me :
http://help.sap.com/saphelp_nw04/helpdata/en/c9/bc2d38c4b3f205e10000009b38f8cf/frameset.htm
Assign Points if Helps !!
Regards,
Naveen Rao Kattela

Passing Source Query Variables to Target query in RRI

Hello,
I Creating Jump Queries.
In the source query user is entering some variable(Dates), based on these varaibles I am creating formula variable in the source query.
I wanted pass the same varible values(which are entered by user) to target values(RRI) and use the same formula varaible in the target query.
Please advise me how can I do this.
Thanks
Venkat

Hello Venkat,
Please refer to note 1053310 for complete details about RRI and application rules.
The variables are passed implicity but you can explicity defined the rules for varaibles as well. You can define assignment details as required. I hope this will help.
Thanks and Regards,
Asit G Ramteke

Clarification req. about the receiver query output in RRI

Hi,
I need some insight on the output that i see in the receiver output in RRI.
For e.g, In the sender query, I see a list of Cost Elements. Now, I see one of the Cost Element ( select any one context cell) and the perform the RRI Jump.
Now , can you please let me know if in the receiver Query, do I see output only for that particular Cost Element OR all the cost Elements ( irrespective of wht cell on go on the sender query and perform the Jump )..
FYI, currently, when I do the jump, I see all the cost elements even though I select one cost element..Is it the way RRI works ?? OR am I missing out on something..
Please let me know...
Thanks..
Punkuj..

Report - > Costs and Allocations : Costcenters -> Source Query/Infocube/Summary Level
CostCenter|CostElement|Fiscal Period|Actual Amount
C001.........|CE123.........|2007007.......|120$
Report- > Costcenter Line Item Details - > Target Query/DSO/Detailed Level
CostCenter|CostElement|DocNum|DocumDate|Fiscal Period|Actual Amount
C001.........|CE123.........|10023.....|2007/09/12|2007007.......|50$
C001.........|CE123.........|10024.....|2007/09/16|2007007.......|50$
C001.........|CE123.........|10025.....|2007/09/19|2007007.......|20$
Overall Result...................................................................120$
Requirement for jump - > For Document Details like Document Number, Document Date......
Procedure : Rclick on 120$ - GO TO - Costcenter Line Item Details
For e.g, In the sender query, I see a list of Cost Elements. Now, I see one of the Cost Element ( select any one context cell) and the perform the RRI Jump.
You should only see one Costelement from where the jump was made , assuming you have same set of variables in both source and target queries and additional details in the target query if any.
Dollar Amounts may not match as time period values are not passed on to the target query.
Now , can you please let me know if in the receiver Query, do I see output only for that particular Cost Element OR all the cost Elements ( irrespective of wht cell on go on the sender query and perform the Jump )..
Appropriate jump would be from the Dollar Amount Cell ( like 120$ in the above example ) and it depends on the variables you passon etc....primarly the requirement.
Jump may not work from the Overall Result Rows, Node Level Dollar Amounts.....
FYI, currently, when I do the jump, I see all the cost elements even though I select one cost element..Is it the way RRI works ?? OR am I missing out on something..
What are your variables in the source and target query ?
What is the requirement anywas?

RRI : Target query opens in background

Hi all !
I've set up an RRI with a query as a receiver. It works correctly except that when the target query opens, it doesn't remain in foreground. The sender comes back in foreground and I've to go to "Window" menu of Excel to switch back to the receiver.
Is there any customizing to force the receive to remain in foreground ?
Thanks a lot in advance for your help.

We are in BI 7.10
Bex in SP 8 patch 1 revision 1443
Could you please tell me (if you know) the patch level since which my issue was solved ?
Thanks for your help

Selection Screen in Target Query in BEx RRI

Can I get a selection screen when I am drilling down from source to target query.
Thanks,

Hi Gokul,
You can get it ..provided the target query should have some different variables then the source query selection varaibles..
Thanks and regards
Kiran

RRI Jump Query opens the receiver query in standard Template??

Hi,
Few questions from me (Note I have searched the forum database for answers but didnt get a convincing answer)
1) How can I use 1 web custom built template for 2 different queries?
2) I have created the sender receiver setting for the Jump queries. The problem that I am facing is that the sender query uses the custom built web template but when I use GOTO the receiver query instead of using the custome template it executes in standard webtemplate. Kindly suggest how can I open the receiver query in the custom built web template after GOTO function.
Thanks for all your help in advance..
- Amit

Hi SS,
I agree to the statement that RRI uses link to Query but if we setup the custom web template for that jump query in WAD....it will never open in that template via RRI ???
That very disappointing discovery for me !!!
Any other possiblity to make this work????
What if I have the sender and receiver query web template(custom) same???.is it possbile to use the same template for these two template even after jump ???
Regards

RRI - Target query should get input values to variables from first Query

Hi,
I have 2 queries in RRI, when i execute it , i am going to target query, but poping the variable screen, but i should get the input values from the first query automatically.
ex: in my first query, If i select CUSTOMER - A, then second query directly should take the input as Customer as A ans display the Customer A values.
Thnaks,
Amar.

Hi,
In the Assignment details, I have given the Document date variable of the second query for the 0calday of the first query.I hope this sentence is clear
Then the 0calday value directly passes to 0doc_date variable of the second query. And this 0doc_date variable is not seen in the second query.But rest of the variables of the second query like doc num ,category etc. are still visible in the pop up screen. the requirement is Pop Up Screen should be avoided completely
How can be this achieved.
Regards,
Amar

How can I display the value of the Target Currency variable in my query

We have a query which has a key figure set to prompt for a Target Currency at runtime. Because the user did not want the currency displayed in each cell they used the NODIM function to remove it. They do however want to display the Target Currency in a cell within the report. Using Report Designer, I've tried to set up a Text Box to display this value, however, it is not in the list when looking at Constants, Filters or Variables or trying to display it in a Text box. Has anyone found a way to be able to do this?

Hi and thanks for the reply. I should have stated that because this was a validated query, we'd like to do this without modifying the query and thus having to go through another lengthy validation process. That's why we did not go the route of adding Unit to the query but we may have to. Another thing we can do is use a text variable in the headers that displays the currency. That works but, again, it's a query change whereas finding it in Report Designer will not require a query modification.

RRI Problem : Variable Screen Popup while Jumping to Target Query

While jumping from Source to Target query (both are BEx queries), Variable Entry Screen of the Source is popping Up again during Jump, which after pressing Execute (F8) without entering any values, displaying Target Query results correctly. My Target query is having one and only variable on Inv Doc Num of type Replacement Path and I am not supposed to get any variable Screen Popup during Jump. How can I suppress this reappearance of Variable Screen??. I have tried with Delete Options etc in RSBBS Assignment rules and searched for OSS Notes but not succeeded so far. I am on BW3.50 SP20. Any help will be highly appreciated.

Hi Jr,
I am not having the same variables in the Target at all. In fact the characteristics for which variable screen appears in the source are not there in target. I mean Posting Date, Billing Month...Etc are not ther in the Traget. In the Source Query Rows, I have Inv. Doc No as one of the Characteristics.No variable is defined for Inv Doc Num in the Source Query.
I am not getting your question"From which cell..??". If I select any perticular Cell in the Inv Doc Result Rows of the Source Output, During Jump it will return only the details of that particular invoice only? Is itn't?. But I want details of all those invoices, that appesrs in the Source Output. That is why, I am selecting my Jump target from the GOTO botton (Red Arrow like Symbol in BEx Tool Bar), and choosing my Target.
Thanks

Using Linq Query in our program error is thrown :Exception has been thrown by the target of an invocation.

Hi All,
I am writing the below linq query to fetch the record from the database ,
var individualres = (from c in orgContext.CreateQuery("contact")
join a in orgContext.CreateQuery("annotation")
on c["contactid"] equals a["objectid"]
where (bool)a["isdocument"] == true && a["objectid"] == r.GUID &&
a["filename"] != null
select new
FirstName = c["firstname"],
LastName = c["lastname"],
CreatedDate=a["createdon"],
DocumentBody = (a["documentbody"] == null) ? "" : a["documentbody"],
GUID = c["contactid"],
FileName = a["filename"],
WorkStatus = (c["new_workstatus"] == null) ? "" : c["new_workstatus"],
Rank = (c["new_rank"] == null) ? "" : c["new_rank"],
State = (c["address1_stateorprovince"] == null) ? "" : c["address1_stateorprovince"],
City = (c["address1_city"] == null) ? "" : c["address1_city"]
But it is throwing the error Exception has been thrown by the target of an invocation.
if this error is related to null values into the columns , then i am handling those by using the
ternary operator.
Can anybody help me out for this issue.
thanks in advance.

Hello EmpAnsar,
>>But it is throwing the error Exception has been thrown by the target of an invocation.
From your LINQ query, it is hard to tell what the caused reason is since we do not have your exact tables and data. My suggestion is that you could narrow this issue by reducing items you want to fetch, for example, you could firstly write a sample query
without where clause and select new syntax as:
var individualres = (from c in orgContext.CreateQuery("contact")
join a in orgContext.CreateQuery("annotation")
on c["contactid"] equals a["objectid"]
select c).ToList();
To check if it would work, if so, you could add these filters and items you want step by step until reproducing this issue, this would help locate the root reason.
Update:
For this exception, i found some related threads which might be helpful to you:
http://stackoverflow.com/questions/11809530/linq-and-exception-has-been-thrown-by-the-target-of-an-invocation
http://stackoverflow.com/questions/4074058/exception-raised-when-using-a-linq-query-with-entity-framework
http://stackoverflow.com/questions/7674105/linq-aggregate-produces-error-exception-has-been-thrown-by-the-target-of-an-in
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to execute query to store the result in the target table column ?

Hi
Source: Oracle
Target: Oracle
ODI: 11g
I have an interface which loads the data from source table to target. Some of the columns in the target tables are automatically mapped with source table. Some of the column remain un-mapped. Those who remain un-mapped, I want to load the values in that column by executing an query. So can anybody tell me where I should mention that query whose result would become the value of the specific column.
-Thanks,
Shrinivas

Actually I select the column from the target table then in the Property Inspector-->Mapping properties-->Implementation
tab I have written the query which retrieve the value for that column. Is the right place to write the query? How can do this ?
-Shrinivas

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

RRI: refresh in the target query possible?

Similar Messages

Maybe you are looking for