RRI report transfer to ERP transaction VA03 problem

Hi all,
I have following problem when I tried to jump to VA03 transaction from Query Designer report.
I created sender/receiver assignment with following options
Sender : Query Designer report
Receiver : VA03 transaction
When i click on go to VA03 it's displaying error " Java communication error: Error when opening an RFC connection" after it's displaying below error.
Is it related to EP and R/3 connnection problem or else?
Error:
SAP Web Application Server window is displaying and asking for logon details.
The URL http://ttcsap04:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system TCQ : System error
The error occurred on the application server ttcsap04_TCQ_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLRSRR_WEB
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TCQ in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ttcsap04_TCQ_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ttcsap04_TCQ_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 500 -u: USER -l: E -s: TCQ -i: ttcsap04_TCQ_01 -w: 0 -d: 20090107 -t: 041216 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Thanks in Advance,
Venky

Hi
You need to establish the connection between EP/ERP/BI-BEx.
More of a network / Basis/ EP Issue Raise a ticket with them for the help.

Similar Messages

Problem while RRI transfer to ERP transaction VA03

Hi all,
I have following problem when I tried to jump to VA03 transaction from Query Designer report.
I created sender/receiver assignment with following options
Sender : Query Designer report
Receiver : VA03 transaction
Error:
SAP Web Application Server window is displaying and asking for logon details.
The URL http://ttcsap04:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system TCQ : System error
The error occurred on the application server ttcsap04_TCQ_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLRSRR_WEB
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TCQ in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ttcsap04_TCQ_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ttcsap04_TCQ_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 500 -u: USER -l: E -s: TCQ -i: ttcsap04_TCQ_01 -w: 0 -d: 20090107 -t: 041216 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
can you help me to solve the problem?
Thanks,
Venky

Hi all,
Can anyone tell me what is the problem and how to solve?
When i click on go to VA03 it's displaying error " Java communication error: Error when opening an RFC connection" after it's displaying above error.
Is it related to EP and R/3 connnection problem or else?
Thanks,
Venky

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

RRI report issue

Hi all,
I have 3 rows in Sender and in receiver 3 more rows which gives detailed level of information about the sender rows.
I want to design the RRI setting which will jump only from one row not from all the rows/headers.
Is it possible to design, can you please propose settings?
Ex: Billing document, from this field i have to jump to another report or VA03 transaction not from all the row characteristics.
Thanks in advance,
Venky

Hi SVU,
I am able to login into R/3 when i create reciever setting in RSBBS, when i select transaction and source system r/3, it will ask for user id to login, when i run the sender report and select go to VA03, then i am getting this SAP Web Application Server screen, and asking for user name.
I tried with same user which i have in R/3, but it's giving error, few lines in log are
SSO logon not possible; logon tickets not activated on the server
The termination type was : ABORT_MESSAGE_STATE
Do you have any idea?
when we jump from sender query what is the screen to appear 1st?
Thanks,
Venky
Edited by: Venkatesh S on Jan 13, 2009 11:21 AM

SAP ERP 6.0 - Problems displaying numbers in ALV (i.e tx. se16n)

Hi, We've just upgraded our system from version 46C to version 6.0.
As the result of the process we're experiecing a problem when displaying numbers with ALV reports, even with standard transactions.
For example, when running the transaction se16n to display the content of the table CABN table, the value of the ATINN field (NUMC) is replaced by the value of other field ATNAM (CHAR 30).
This situation doesn't happen when consulting data in se16 transaction (here we display the result in se16 standard list).
We also experienced this problem in Z programs showing data in ALV reports..
Any help on this would be appreciated.!!!
Thank you

ORA-00959: tablespace 'PSAPSR3ODS' does not exist
Create the tablespace PSAPSR3ODS through brtools, or sql commands.
Update the import_state.properties where you replace the "-" with "0" for the packages that you want to retry.
Then set the JAVA_HOME environment, and then run the import_monitor.sh.

Regarding RRI reports

Hi all,
can any one plz tell me, in any RRI report where can we find the receiver report name??

Hi,
In transaction RSBBS, enter the name of the Sender Query and press enter. It wil show the names of the Receivers.
if receiver is a query, then its COMUID will be displayed along with the Description. IF you want to find the technical name of the query then copy the name of the receiver abject and enter it as COMPUID in table RSRREPDIR.
- Jaimin

Transaction Launcher - TCode Authorization Issue for ERP transaction

We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher. Everything has been set up properly and the transaction appears in the nav bar. I am running it to launch a new window. When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
*"You do not have authorization to view transaction ZSD_IC".*
Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
Does this have anything to do with IC_LTXE? Is there anything special i need to do to assign proper authorization to this user.
Thanks,
jeremy

Hello Jeremy,
We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
In order to execute transactions from TL we have copied object TSTC to ZTSTC in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
In order to correct the fail we have implemented these notes, but the problem still remains.
0001224663 Launch of Front Office with Transaction Launcher fails
0001263716 Launching Front Office Process using Transaction Launcher
Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
Thank you very much in advance.
Best regards.

ERP Transaction Launcher leads to blank screen

Hello
I followed SAP notes and various threads here at SDN to setup launch of ERP transactions from CRM webclient.
In principle I have applied SAP notes on ERP and CRM for IC_LTX and IC_LTXE transaction codes and also did all steps as per enclosed blog,
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
However when I launch the transaction, I get SAP Logon prompt from ERP server as expected. When I enter credentials correctly, I get an embedded window with SAP GUI menu (only two options Menu and System and field to enter Tcode) and empty screen area .
Now if I enter he tcode in opened empty window say "/nva03" , I am able to start the transaction.
Any clues on why the transaction does not launch correctly?
Thanks

Hi,
I get the same problem, but it gets back to CRM. I think the problem is that http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?*transaction=IC_LTXE*&okcode=ICEXECUTE
transaction=IC_ICLTXE should be replaced by the transaction ex: VA01 and it is not.
Tell me if you have any clue.
Tx
Thomas

Run a SAP ERP transaction from a BPF

Hi Experts:
We would need to run a SAP ERP transaction from our BPF. Would it be directly possible?
I guess it would be possible by programming a BADI, wouldn't it? Would it be the best option?
Thanks in advance for your help.
Kind regards
Jose

Hi Jose -
You can execute an ERP transaction from a Drill Through command if your EPR system has an ITS (Internet Transaction Server)installed. Please see the following "How To" guide for details:
[How To..Configure Drill Through Functionality |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10a56b21-04b9-2d10-a6b7-e0f8732b4142]
You cannot directly access the Drill Through from a BPF, you would need to link a report into the BPF then link the Drill Through from the report.
Regards,
Sheldon

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Calling a Standard SAP transaction VA03 from another web dynpro application

Hi All,
I have a requirement wherein I need to call the standard SAP transaction VA03 whenever a sales order is selected in some other we dynpro application so that the sales order gets displayed.
No regarding usage of OBN for the above functionality I have certain queries:
1. In order to call VA03 do I need to create a transactional iview for it or is there any direct method.Also how to pass this sales order number as parameter to the T.Code.
2. Can we use standard business object BUS2032 for OBN or a new Business object is created.What exactly is the purpose of these standard business objects in portal and when should they be used.
Thanks in advance
Aman Gupta

Hi Aman - Do you have a portal team in your project or you have to create the IVIEWS yourself?
I do have a portal team and I dont know how they create the IVIEWs but for example, I will go to my portal team and I will ask them to create an IVIEW for TCODE VA03, they will created and they will tell me the input parameters they entered for the IVIEW so I can call OBN and display in webdynpro.
SAP in SRM has webdynpro e.g. for BUS2121 and they have an IVIEW already implemented in the portal context pointing to the webdynpro of BUS2121 so we can used the IVIEW by calling OBN and passing the parameters; in my case the object_type will be 'shc' and the operation will be 'display' and the paremeters itab will be the GUID of my shopping cart, that way the OBN can understand which Shopping cart open and in which operation mode.
I also did something like your requirement, I need it to display a specific case in Records Management but SAP has a standard IVIEW for records management 'RMREGEDIT' that didn't work for my requirement so I went to SE38 created a program that displayed the case based on GUID and I created a TCODE of my custom program. Portal team created a custom IVIEW of my custom TCODE and they told me the input parameters to call the TCODE in OBN and I pass in the itab parameter the GUID of the case using the FM that I post before.
The action to call the OBN is in the event handler ON_CLICK of my ALV and the action is getting trigger when the user actually clicks a HYPERLINK in the ALV.
Hope this helps you!
Please feel free to ask me more details if you need.
Jason PV

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

Latest QuickVPN(v1.3.0.3) reports "WGET.exe has encountered a problem..." with WRVS4400N

I have a WRVS4400N(latest firmware V2.0.0.7) and am trying to connect to it for the first time using the latest QuickVPN v1.3.0.3 installed on a Windows XP Professional (w/SP3) computer. Installation of QuickVPN with no errors, but as soon as I ran it and tried to connect, it reported "wget.exe has encountered a problem and needs to close. We are sorry for the inconvenience...". I tried it on another machine, also with XP Prof SP2 - same error. I have looked at the soultion in other similar threads of removing spaces and that did not resolve the issue. Please let me know if any one has a solution to this problem.

It sems that the problem was with the Quick VPN client. Please try to download a copy of the QVPN from the Linksys site and try to re-install it on your computer. Please make sure that the previously installed QVPN has been remove before you reinstall it.
Message Edited by aponikikay on 01-13-2010 07:49 AM

RRI report transfer to ERP transaction VA03 problem

Similar Messages

Maybe you are looking for