RRI - Selection was not Restrcited

Hi All,
While jumping from BEX report to R/3 transaction MB51
I get this warning stating " Selection was not Restrcited" .
What could be the problem?
Regards
Nitin

you are trying to run MB51 with no selection.
In BW, in the RRI settings, screen 'maintain Sender/Receiver Assignment', you have a button
"Assignments Details" where you can do the link between the infoobject and the R/3 field.
If you are using the 100% of the business content(infoobject, update rule, infosource....), the mapping should not be mandatory. Otherwise you have to do it :
For example, the field material in MB51 has
Parameter ID MAT
Screen field MATNR-LOW.
With Se11 you can find data element, domain.
You can see this in help of the field in R/3 (F1-F9)
You have to map for infoobject material with the R/3 fields.

Similar Messages

I am getting the message "the disc you inserted was not readable by this computer" when I plug in a verizon air card into my macbook air. It also does not show up as a device on my desktop. However, I select "ignore" and am still able to connect.

Whenever I insert my verizon air card into my MBA, I get the message "the disc you inserted was not readable by the computer", with the option to either ignore or eject. I select ignore, and am able to connect to the internet, but don't know why this happens. Also, the air card is not showing up as a peripheral on my desk top. Any ideas why this might be happening and how to fix it?

When I unplugged (power) and plugged in again to restart it, yes, I heard it spin and click. Not since then though. I assumed it went to sleep and since the computers don't recognize it they won't wake it.
If I need to replace it can the data on it be recovered?

Selected Scanner Was Not Found

I am running Windows 7 Pro 64 bit, and Acrobat 9 pro. I have a HP Scanjet 7650 on my desk, hooked up to my laptop via usb cable. I have been scanning for over a year, no problem. Today, when I got to work, I tried to scan something and it gives me this error: Error while interacting with the scanner; the selected scanner was not found. I have tried the Twain, WIA, Native Interface, non native interface, presets, custom. every option and combination and it gives me the same error. I unplugged the cables, reinstalled HP drivers, I reinstalled Acrobat. It works fine if I right click on the scanner from the devices/printers box and click on 'scan'. it just won't work with Acrobat.

I deleted and reinstalled the twain drivers two or three times and it finally started working today with acrobat 9

Error selecting a dimension member in BPC EPM report - The given key was not present in the dictionary

Hi,
We are currently running SAP BPC 10.1 NW on Hana
Version:
CPMBPC 810 SP 4
SAP_BW 740 SP 9
HANABPC 810 SP 4
EPM Excel Add-in 10 SP 21 .NET 4 build 9094.
On my embedded model. I have a BEX query on a aggregation level which I access in a report using the EPM Add-in Excel .
When I edit my report in EPM Add-in Excel , and I try to select the dimension members for a selected dimension member, I get the following error.
"The given key was not present in the dictionary"
Any assistance to help resolve the problem will be appreciated.
Regards
Gavin

Hi Shrikant,
I had a look at MBR_SEQ , it is a attribute on the dimension member in BW , this relates to a past version of BPC 7.5. We are currently on BPC 10.1 Embedded model , and the MBR_SEQ does not exist on any of the characteristics I have in my info cube.
When I create a web report I am able to access the dimension members using the select dimensions options, the problem seems to be on the EPM Add-in Excel client only.
Thanks
Gavin

I have selected the Erase all contents and settings option in my ipod touch 4. till then i was not able to turn it on and even it was not detectable on itunes. what should i do now?

i have selected the Erase all contents and settings option in my ipod touch 4. till then i was not able to turn it on and even it was not detectable on itunes. what should i do now?

I am confused. You said till you Erases all contents and setting yu could not turn it and iTunes did not see it. How could you Erase all Contents and Setting if you could not turn it on?

When I try to upgrade to Mountain Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, how can I upgrade?

When I try to upgrade to Mountain Lion OS form Lion OS, after I select the "Buy App" option I get this "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed" message, what is causing this problem, how can I find a solution, is someone else having this problem?

The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps.

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

MacBook Air, Mid2013, MacOS 10.9.2; I tried to erase the HD of my Mac; Apple Support suggested restarting the computer pressing cmd R, then select "Utility Disk", then Mac HD, choose "Erase", the option "Security Options" should be available, it was not

MacBook Air, Mid2013, MacOS 10.9.2
I tried to erase the HD of my Mac; Apple Support suggested to restart the computer pressing cmd + R, then select "Utility Disk", then Mac HD, and choose "Erase", the option "Security Options" should be available, but it was not
I was able to erase the disk and reinstall the OS but not to choose the option to overwrite the disk, as the official Apple Support said previously.
I called again them, this time I was said that with an SSD disk the security option (overwrite the disk) is not available, and that is it, no way out; and they added very kindly that if I sell my Mac, the buyer could bring it to a Tech Center and they could eventually recover the data on it, even though this may be expensive
Is there anyone that has any suggestion to protect the data before selling a Mac; the guys at Apple Official Support did not seem very concerned about this

I was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem

"The selected video could not be played. The format was not recognized."

I am having problems with "The selected video could not be played. The format was not recognized." It happens when I try to watch TV show/Movie previews.
I can usually watch a few previews before the error comes up. Once the error comes up, sometimes I cannot watch the previews that I was able to watch just minutes ago. Other times, it seems to be dependent on the preview - some previews work fine and others don't work at all.
Fortunately, I can still watch all purchased content.
Apple TV is at 2.4. I've tried de/reauthorizing iTunes and logging out/in via Apple TV.
Can anyone offer help? Anyone have the same issue?
Message was edited by: Boople

I just purchased a music video from iTunes onto my MacBook Pro and downloaded it to my apple tv and had the same problem.
I also rented two movies on my MacBook Pro while traveling in Spain, when I got home and sync'd with apple tv it would not play on apple tv only the laptop. Got not authorized error... I then rent a movie directly from apple tv and that does play.
This is painful and I just bought a second apple tv unit... regretting it so far!

The selected video can not be played - The format was not recognized

Is anyone getting the following error on home vids or Handbrake vids?
The Selected Video cannot be played. The format was not recognized.
If I actually sync the videos and send them over to the Apple TV they will play, but if I try to stream vids from my iTunes library, that is the error I get.

Are your vids on an external HD that Itunes points to or local to your computer? I would say unplug your ATV and power cycle all your components. All "My Movies" are encoded via HB and are playing fine since the firmware upgrade, my issues seem to be how cacheing is now being handled under the "Movies" category.

Apple tv error message "the selected video could not be played. the format was not recognized"

my apple tv has started displaying error message "the selected video could not be played. the format was not recognized" on all my movies. i have never had a problem with it before. please help.

Welcome to the Apple Community.
It seems that your Apple TV may be unable to see your movies, where are your movies kept, have you recently moved them, have you done anything else that might be related.

Error Level 10: I have this error where a plugin broke that I had to remove because it was not finding it. How do i install it back so it functions?

8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: ‎2014‎-‎08‎-‎29T05:10:07.602701000Z
Wake Time: ‎2014‎-‎08‎-‎29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?

So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
    2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
   script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
   "Failed to connect to the target server!"
   exit(5)
foreach ($card in $netAdapt) {
   IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
       if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
           $myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
       "Success"
   } else {
       "Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
   "The icon is hidden.. Setting it now"
   $setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
   } else {
   "The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server   IPs   Subnet   GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
   Write-Host "Looking at $server"
   $colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
   foreach($objItem in $colItems) {
   Write-Host ""
   $myip = $objItem.IPAddress -join " "
   $mySubnet = $objItem.IPSubnet
   $myGW = $objItem.DefaultIPGateway
   $temp = $objItem.index
   $myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
   $myid = $myid -replace "@{netconnectionid=",""
   $myid = $myid -Replace "}",""
   echo "$server   $myip   $mySubnet   $myGW   $myid"
   echo "$server   $myip   $mySubnet   $myGW   $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found

Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.

Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.

RRI - Selection was not Restrcited

Similar Messages

Maybe you are looking for