RRI sending restrictions issue in BEx Analyzer - Known SP Issue?

We have two queries linked through an RRI interface that is designed to "send" a restriction of one characteristic when the user right clicks on the cell containing the value they want to see in the second ("Goto") query and selects "Goto" and the second query's name. This interface works fine on my machine with both my ID and the test ID the users are using to test these reports. My machine is on SP8, Patch 1 Revision 1443. However, when the users execute the same query and try the RRI they see the second query with all of the values in that column, not just the one they "selected". They are on SP7, Patch 1 Revision 1352. Is this a known issue with this version of Analyzer? I have been searching around and can't find any documentation saying so, but something "official" from SAP that documents this would be perfect to recommend and upgrade to SP8 to fix this problem.
Thanks!

Hi Somenath,
Are you sure that all the data in cube is affected? I mean also the data loaded in cube before GUI upgrade?
I have a feeling that instead of GUI upgrade something happened to the background user that is extracting the data in source system. E.g. this user master data has changed - in decimal format.
So check the user and check data loaded before/after change of GUI.
BR
m./

Similar Messages

BEx Analyzer for connection issue

Hi Everyone,
I received the following message while using RRMX transaction from SAP BI 7 system and unable to connect BI and BEx Analyzer. However, I am able to connect to BW system from BEx Analyzer when manually enter user id and password after this error. There is no issues in Dev, QA and has this issue in Preproduction system.
Verified with my colleague who have same SAP GUI 7.2, MS Excel 2003 versions and my colleague is able to conenct to BEx Analyzer successfully. Please advise.
Error Group
RFC_ERROR_COMMUNICATION
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=camccvrrb.gotd.gm.com, GWSERV=sapgw23, SYSNR=23
LOCATION    CPIC (TCP/IP) on local host
ERROR       connection to partner 'camccvrrb.gotd.gm.com:3323' broken
TIME        Tue May 17 08:19:12 2011
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -6
MODULE      gwxx.c
LINE        646
DETAIL      NiIRead: P=0.10.0.4:3323; L=127.0.0.1:3136
SYSTEM CALL GwRead
COUNTER     2
Thanks
Prasad

HI Prasad,
This is a known issue.
Implement these three notes on your system: 1435326, 1471630, 1498947(manual steps).
If persist, let me know.
Best regards,
Edward John

Issue with Bex Analyzer installation

Hi
I am working on BI 7, I had install all the patches that r relevant to BI 7. My issue is I am not getting a drop down list when i select the open icon in the Bex analyzer and also getting the Java error when i run the web template in wad. Basis looked into this issue still they r not able to resolve.
Is any one faced the same issue pls let me know .

Hi Priya,
Ask him to installation MS-office bug fix patch : office2003-KB907417-FullFile-ENU, then analyzer Open will work.
I am also facing same problem I resolved with install above MS-Office patch.
Hope it will helpful.
Thanks,
Chandra

BEx Analyzer 7.1 Issue after upgrade to MS Office 2007

Hi
We upgraded MS Office 2003 to 2007 and installed SAP GUI 7.10 (Patch 9). The OS is Windows XP (SP3).
We have also applied "BI AddOn Patch for GUI 7.10"
When we run BEx Analyser from Windows start menu or RRMX , we notice the error message: "A critical program error occurred. The program has to close. Please refer to the trace for further information".
Following is the trace details:
Trace Started as: 10/3/2008 11:25:26 AM*
ListSeparator: ,
ExcelVersion: 12.0
AddinVersion: 7100.2.700.1344
BExCompression.SupportsCompression: Compression NOT supported
Could not load file or assembly 'vjslib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
BExCheckFrontend.CheckFrontend: No Check performed (20081002) 0.156257
10/3/2008 11:28:36 AM----
System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticalProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticlaProgramError ---> System.Exception: CriticalProgramError ---> System.ArgumentException: The item with the specified name wasn't found.
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at com.sap.bi.et.analyzer.addin.BExChart.get_Chart(ChartDescription iChart, BExExcelItem iItem)
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExItemGrid.UpdateCharts()
   at com.sap.bi.et.analyzer.addin.BExItemGrid.OnRender(Boolean iForceRendering)
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExItem.Render()
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.api.BExApplication.Render()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQueryThreaded(BExParameter iParameter)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessParameterSubExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.OpenQuery(OSObjectInformation iObjectDescription, String iRRIVariableName, String iRRIVariableValue)
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExThreads.ProcessOpenQueryExecuter.Execute()
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessOpenQuery()
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   --- End of inner exception stack trace ---
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
CriticalProgramError
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.Process(String iStepName)
   at com.sap.bi.et.analyzer.addin.BExUserInteraction.ProcessUserInteraction(Sub iSubDelegate, BExStepType iStepType)
   at com.sap.bi.et.analyzer.addin.BExMenu.Process(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExMenu.ProcessCMD(CMD iCMD)
   at com.sap.bi.et.analyzer.addin.BExConnect.ExcelCommunication.ProcessBExMenuCommand(String iCMD)
Regards
Madhu

Hi
This problem is solved.. We need to change the global settings in BEx Analyzer.. Following are the steps:
-     After executing RRMX, BEx Analyzer screen opens
-     Open Global Settings
-     Select u201CDefault Workbooku201D tab
-     Click u201CUse SAP Standardu201D
-     And then execute the query
Regards
Madhu

BEx Analyzer 7.0 Issues

Hello everyone,
We recently started using BEx 7.0. I have 3 issues currently with BEx 7.0.
1. When I run the query I keep getting a message that says "System is not set to changeable - objects are not changeable".
RSA1> Transport connection>object changeability>XLWB - is already set to Everything changeable.
2. When I make the changes to the workbook, I cannot do "Save workbook" because it is disabled. Only option availabe is "Save workbook as".
I have checked authorization profile and S_USR_AGR has All Activities.
3. When I try to do use "Copy Sheet" function, the query short dumps with an error "Exception condition "BAD_VALUE_COMBINATION" raised.
Please note we are using Support Package 3 and Revision 1728 on Business Explorer Analyzer.
Also, we have not had any issue with Saving workbook or inserting queries in the workbook in BEx 3.5
Thanks in advance
Lakshmi

Hello Lakshmi,
Thanks for your feedback,
Error "BAD_VALUE_COMBINATION" should not be there with the latest front end patch. Can you please download the
latest frontend patch from service market place. This will resolve your issue.
Please let me know once this is not resolved the latest patch.
regards,
Arvind

Formatting issues in BEx Analyzer

Hello friends
I need your help regarding the following problem.
I have created a Workbook in BEx 04s which has 4 queries on multiple worksheets. Now I am trying to add one more worksheet with a query embedded in it through an Analysis grid. However the Query is dynamic as in the space occupied by it in the Workbook would vary depending on the variable selected. So, how can I format the worksheet in such a way that the dynamic space occupied by the query is formatted in a same way. The problem I am facing is that I format the query result in the BEx and save it but when I execute it again with a different variable, then the additional area occupied by the result is not formatted.

Hi Rishi,
do you allready have tried to use Excel stylesheets? Change the ones starting with "SAPBEX" to your corresponding needs. It should work that way.

Authorization issues in Bex Analyzer

Hello,
Can somebody help me with an authorization challenge Im working on? For certain reports a user should me authorized to see key figures for a certain area and this area is divided into several units. This is the high level report authorization. But when they want to see more detail in the report (the can drill down the person responsible or the customer for example) the user is only allowed to see the key figures of his own unit. To make this possible we have created two authorization roles:
Role 1
Area                          *
Unit                          11
Person Responsible          *
Customer               *
Role 2
Area                    *
Unit                    *
Person Responsible          :
Customer               :
When executing the query with the characteristics area and unit in the rows and person responsible and Customer in the free characteristics there are no authorization issues. But when in the query result the user wants to drill down person responsible the error message You do not have authorization to read object XXX. I expected that the details would only be shown for unit 11. To be able to show the details the user must now first remove the drill down, filter the unit they have authorization for and then drill down the person responsible again. This is considered a workaround but not desirable. Is there a different way to solve this issue?
Kind Regards,
Petra van Noort

Hi,
Have you tried to include a authorization variable on your report that filters 'Unit'?
I'm not sure of what will happen if you use it (maybe you'll always filter your report on '11' unit, or maybe you get different filter values depending on your drill down status, which is what you want).
It's just a thought...
Regards,
David.

Issue in Bex Analyzer

Hi ALL,
As we have workbooks with 2-3 queries inserted, facing a problem with overlapping the results from 1st query to below one if we open the nodes in GL Hierarchy. We need to find a solution to dynamically push the below query down with respect to above query result area.
And also, To do this, you need to know the local queryID of each query.How to get local queryID
Please suggest on this .
Thanks & Regards
Sameer Khan

Hi,
did you think about adding each queery in it's own sheet within the workbook? Or isn't that an option for you, is it?
regards
Siggi

BEx Analyzer: Formula Variable with Replacement path change Month with Day

Hi experts I'm facing this issue in BEx Analyzer.
I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
The formula works but it behaves in a strange way:
if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
anybody has faced this issue before?
any help will be appreciated
Daniele Cortopassi

Hi Daniele,
This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
Thanks,
Arun Bala

Bex Analyzer Amount not correct

Hi ,
I am facing an issue with Bex Analyzer. When I run a report from Query Designer on the web , the amount key figures displays as $772.97
However in Analyzer ,same amount displays as 0.00000773 . I
Any ideas?
HD

Hi
looks like a scaling error. Do have any scaling relevant settings or is this done in the webtemplate (mutliplied by some factor) ?
Regards
Jürgen

BEx analyzer don't work move columns in report (like drill down)

Hi
    I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
    I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                           <--
    But this time it's not possible...
    Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
    It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate..
    I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
    Could you help me please?
    I will appreciate your help and I will assign points for your answers.
Alice

Hi Alice,,
This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
Hope this helps.
Shakeel.

Sending System message in BEx

Dear BW Experts,
I want to send some messages to BEx Analyzer. Is it possible in SAP BW/BI? How?
Actually I want to send this message if my process chain fails or in running mode.
User will understand that data loading has not been finished.
Thanks in advance.
Regards
Biswarup

Hi,
by creating the message in smo2 ,the message reaches user at the intial point where the user starts his BEx analyser (after entering the user name and password,the user can view the message)
infact u can assign a infoobject (Request ID > variable - Most current data) in the Queries as the "last data updated " = the date that recently updated.
by adding the variable to you query ,t he user can understand that the Most current data is ...DD.MM.YYYY
i hope this answers your Question

BEX Analyzer 3.5 Expired Certificate / Digital Signature

Hey Everyone,
Are any of you experiencing this? Expired Digital Signature issue for BEX Analyzer (sapbex.xla).
We are on SAP GUI 7.10 patch 8, and BEX 3.5 Add-On patch 4. When users
go to launch the BEX Anlayzer or open broadcasted reports, they get an
error saying Digital Signature is Invalid or has Expired.
This is because of the certificate that is provided with SAPBEX.XLA, expired on 3/6/09.
I looked into relavent notes 492364, and 929716 which come with older certificates. We do not want to enable macros completely.
Thanks!
Imran

Hi Imran,
After Opening your Bex analyzer or in Excel
Excel goto -- tools macrosecurity--Security level Tab --choose *Medium* option after setting this open your bex analyzer again you will get a pop up for *enable or disable macros* you can choose disable macros,
now you will be able to open the Bex analyzer and run queries
IF you are not still able to use or if you dont want *enable macro / disable macro* pop up then use
this setting,
Excel goto -- tools macrosecurity--Security level Tab -- choose Low option
you will not get any pop ups and you will get the select query option.
Hope this solve your issue.
Edited by: suresh on Mar 12, 2009 2:21 AM

Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

How to show filter values of restricted key figures in BEx Analyzer?

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

Hi,
I have following report.
                     Quantity USA        Quantity China
Product           100                        150
Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
E.g.:
Country          USA
                     Quantity USA
Product           100
If I put both restricted key figures in the query, this line is not shown.
Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
Thanks!
Regards,
Pascal

RRI sending restrictions issue in BEx Analyzer - Known SP Issue?

Similar Messages

Maybe you are looking for