RRI to ME1M does not transfer MATNR as parameter

Dear all,
I tried to establish a Report-to-Report interface, by calling transaction ME1M from my BW report to SAP/R3.
The problem is, that all parameters (Vendor, Site, etc.) are transferred correctly, only the material number is not transferred at all.
I tried already the setting "Generic" for 0MATERIAL, as well as the setting:
3 - Table field with
Field Name MATNR
Data Element: MATNR
Domain: MATNR
SET/GET Parameter: MAT
Both did not work out. As I do not really want to write a program (like dscribed in OSS 694244), I hope there is a setting which will work "native".
Any ideas?
Thanks,
Andreas

Hi,
you may find an answer for this problem in the Note: 383077
There is also a sample report contained, specally adressing the MM03.
Best Regards,
Manuel

Similar Messages

HT1296 How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and the back up the phone again...

How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.

Copy everything from your backup copy of your old computer.

The videos from my ipod does not transfer to itunes in my macbook pro they dont work it says The document "REGGAETON GRAN MIX 5.avi" could not be opened. The movie is not in a format that QuickTime Player understands.

the videos from my ipod does not transfer to itunes in my macbook pro they dont work it says The document “REGGAETON GRAN MIX 5.avi” could not be opened. The movie is not in a format that QuickTime Player understands.what shoul I do?

You need to convert the .avi file - http://www.snowfoxsoft.com/tutorial/how-to-convert-avi-to-itunes.html
MJ

Song purchased from itunes wifi does not transfer back to pc in manual mode

Hi one and all....heres a little poser. brought a song from itunes (wifi) but it does not transfer to itunes on the pc when I hook up my ipod touch. I have to manually fill my pod as I have to much groovy music. When I check the music on the pod its there but it does not show when I link it up to itunes...so I cannot even drag it into my music folder..I expect it would work if I was in full sycn mode but too much music . Any ideas??
cheers
mark

I purchased songs on two different iTouches at different times. Both iTouches had the same device name. Now I have two Purchased on folders with the same name, each with their respective songs purchased on the seperate iTouches. It looks a little weird.

ITunes often does not transfer "time" from CD

ITunes often does not transfer "time" from the CD -- comes across as "Not available." Other songs on the same CD transfer OK. If there is a "Not available" notation in iTunes, my iPod is unable to play song. Have I "lost" all the previously transferred songs that have "Not available" times? Anyway to recoup them?

Welcome to Apple Discussions.
You should post this question in the iTunes forum, where they will be more knowledgable about these issues.

Podcast image does not transfer to iPod

I publish a podcast, hosted by Podbean, and when I publish an episode, the image is displayed only in the iTunes player. It does not display with the Podcast in the Podcast Library in iTunes on my PC, nor does it transfer to my iPod. Evidently the image IS "transferred" to iTunes when iTunes picks up the new episode, but it does NOT "transfer" from iTunes to the downloader's machine or iPod. Any ideas of a setting I may be missing, or anything I may be doing wrong?
If it would help to look at the podcasts, they are (1) Alien Nation Student Ministries with Pastor Rob Deveney and (2)NUnity Church of God with Pastor George Moxley.
Thanks for any help!

New info: the artwork IS there when I download directly to my iPod. My issue is obviously with iTunes on my PC. That's better; I was worreid no one who downloaded the podcasts would have the images, but evidently they will if they download direct to iPod. Meanwhile, I'd still like to know what's up with transfers from iTunes to iPod.

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this,

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?

I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer?

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

When I place photos on the cloud to share with friends, the photo IDinformation I have entered with the photo does not transfer. Is there a way to have the text follow the photo in the cloud?

When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo. Is there a setting I am missing that would allow the text to go along with the photograph?

The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.

One of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

one of my apps does not transfer when I synch (I have tried several times): it is the Overdrive Media Console

If you are a resident of the U.S, have iTunes 10.3, iOS 4.3.3, you can re download apps for free directly on the iPad.
Tap the App Store icon, find the app: download
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Apostrophe glyph does not transfer from CS3 to CS2 by inx

Can someone please confirm this: The Apostrophe glyph does not transfer by inx from CS3 5.0.2(640) to CS2 4.0.5(688).
It does transfer by inx from CS2 4.05(688) to CS1 3.0.1(838).
It also does roundtrip in CS3, CS2, and CS.
This is not a problem for me now that I know about it. I just wanted to report it for the benefit of others, as this is a commonly used character.
I tested this with Times (T1) in a very simple file containing just the apostrophe glyph followed by the lower case "x". These tests were conducted in Tiger 10.4.11.
It seems like it may be related to the similar problem with bullet glyphs that has been mentioned by Sandee and others in this forum.
Al

I can reproduce the report by Klaus of being able to put in the "missing" apostrophe with a text editor. But using TextWrangler I was unable to find the "missing" apostrophe in the CS3 inx by searching for "'" or "0027" (the Unicode value for the apostrophe). Now, since IDCS3 is able to open its own inx including the apostrophe glyph, it must be encoding it in the inx in some special way. Exploring the IDCS2 inx for a test file with the string "CHICKEN 'N WAFFLES" shows that it is saved as "c_CHICKEN"+"&apos"+";N WAFFLES". Then searching from the top for the string "&apos", finds 5 instances of it. While a simillar search for "&apos" in the CS3 inx finds only one instance of it. Clearly IDCS3 and IDCS2 write their inx files differently. No surprise there. Searching the CS3 inx for *parts* of "CHICKEN 'N WAFFLES" locates: <txsr prst="o_u65" crst="o_u62" paln="e_cent" ptfs="c_Medium" ptsz="U_18" font="c_Helvetica"> <pcnt>c_CHICKEN </pcnt> </txsr> <txsr prst="o_u65" crst="o_u62" paln="e_cent" ptfs="c_Medium" ptsz="U_18" ligt="b_f" font="c_Helvetica" OTca="b_f"> <pcnt>e_SSSq</pcnt> </txsr> <txsr prst="o_u65" crst="o_u62" paln="e_cent" ptfs="c_Medium" ptsz="U_18" font="c_Helvetica"> <pcnt>c_N WAFFLES</pcnt> </txsr> Now if I paste in a copy of the lines : <txsr prst="o_u65" crst="o_u62" paln="e_cent" ptfs="c_Medium" ptsz="U_18" font="c_Helvetica"> <pcnt>c_N WAFFLES</pcnt> </txsr> after the first occurrence and save the file from TextWrangler, it will then reopen in IDCS3 with the text string "CHICKEN ''N WAFFLES" (note the two apostrophes). But in the case of the string " 'x" as the only contents of the text frame where the apostrophe *does* transfer from CS3 to CS2 it is encoded this way: <txsr prst="o_u6b" crst="o_u68" ptfs="c_Regular" ptsz="U_18" ligt="b_f" font="c_Times (TT)" OTca="b_f"> <pcnt>c_ '</pcnt> </txsr> <txsr prst="o_u6b" crst="o_u68" ptsz="U_18" font="c_Times (TT)"> <pcnt>c_x</pcnt> </txsr> Note the "&apos" in that code, which is what CS2 is able to import. Conclusion: IDCS3 does indeed save the apostrophe in the inx in a completely different way than IDCS2, and in different ways under different circumstances. So the bug is that Abobe forgot to take into account how the new way of writing the apostrophe would affect IDCS2's ability to import it. Al

PDP - BBP_EXTREQ_TRANSFER does not transfer PRs

Dear SRM Gurus,
we are trying to move R/3 requisitions up to SRM (4.0, Classic). PRs are getting into the transfer table, but the report BBP_EXTREQ_TRANSFER does not transfer the PRs.
Does anyone of you have insights into this report and how it should work?
Thanks,
Claudia

Thanks for your replies!
The settings are done like described. The RFC User is maintained in the Org Model as well as the user for "Entry Channel". I am not sure, if I am missing something there.
I have a PR in the table and now I want to move the PR to SRM. Running the report manually does not move anything. When the job is scheduled using the RFC User, the job is stuck in Outbound Queue giving error "No authorization to log into target system". Any idea?
I also do not know where the PR is technically moved into SRM?
Looking forward to you insights!
Thanks,
Claudia

When I transfer a playlist which I modified song ending times, it does not transfer to idvd project. Any suggestions?

When I transfer a playlist, where I modified the songs ending times, it does not transfer as edited to my idvd slide show project. It reverts back to original song times. I am trying to edit songs to match slide show segments.
Any suggestions?

Use Garageband to edit the songs. Save them as new files for use with your slide show. The modifications made in iTunes do not modify the song files, they only tell iTunes how to play the songs.

Album art does not transfer to iphone

my album art on itunes does not transfer to my iphone no matter what i do. help

Thanks for such a quick reply. My itunes is up to date but my iphone is 4.2.1 and I am afraid to upgrade because it is jailbroken and unlocked running on tmobile. It was a very difficult jailbreak/unlock but i persevered. I think the phone is a frankenstein. modem firmware is 6.15.0 and i had to root the phone to jailbreak it because the wifi doesn't work (antenna may be broken). With all this info do you think i should upgrade?

The information on my sim card does not transfer when i run isync

macbook Mac OS X (10.4.9) The information on my sim card does not transfer when i run isync everthig else works fine . i have a nokia 6103

Welcome to Apple Discussions.
There's nothing unusual about that, as the SIM standard is not written to support external data exchanges. In order to synchronize your SIM-stored data, you must first copy or move each contact record into the memory location on your device reserved for contact records not stored on the SIM.

RRI to ME1M does not transfer MATNR as parameter

Similar Messages

Maybe you are looking for